ShibaWow
|
|
July 28, 2014, 03:29:54 PM |
|
Is ANTMINER S3 good ROI to invest on it now?
I think it is, it could break even in 4 months
|
|
|
|
contactlight
|
|
July 28, 2014, 03:34:53 PM |
|
7.7% refund posted to my account just now. Pending....
Transaction now complete!! Mine still shows "Init". Scratch that. I just checked my wallet, it has been sent. It is "unconfirmed" right now. Refunds are sent from 13WHCm8DztmNGZ7XX1tbhUDss4WgRMVnrj.
|
|
|
|
bobsav2121
|
|
July 28, 2014, 03:39:04 PM |
|
Looks like the refunds went through. Not enough compensation if you ask me, especially for the people who have units that don't even meet the "downgraded" specs. Bob
|
|
|
|
jonnybravo0311
Legendary
Offline
Activity: 1344
Merit: 1024
Mine at Jonny's Pool
|
|
July 28, 2014, 04:06:24 PM |
|
I'll add my name to the "refund received" list. Refund transaction received at 11:03am EDT. Thanks Bitmain. Now, would you please ship out the batch 4 units I ordered?
|
Jonny's Pool - Mine with us and help us grow! Support a pool that supports Bitcoin, not a hardware manufacturer's pockets! No SPV cheats. No empty blocks.
|
|
|
-droid-
Legendary
Offline
Activity: 1050
Merit: 1001
|
|
July 28, 2014, 04:11:06 PM |
|
so ive got 4 units
2 hash at 437 and 441 2 hash at 418 and 415
after 24 hours with new firmware
emailed bitmain and they asked me for screenshots of the status page
first 2 are on a evga 850w gold second 2 are on a rosewill capstone 1000w gold
|
|
|
|
Biodom
Legendary
Online
Activity: 3948
Merit: 4460
|
|
July 28, 2014, 04:20:15 PM |
|
so ive got 4 units
2 hash at 437 and 441 2 hash at 418 and 415
emailed bitmain and they asked me for screenshots of the status page
I wonder, what they are going to do with this information?
|
|
|
|
Bearclaw
Newbie
Offline
Activity: 52
Merit: 0
|
|
July 28, 2014, 04:20:55 PM |
|
Received my refund for my units this morning as well, it arrived before UPS delivered my batch 3 units...
|
|
|
|
|
9600
|
|
July 28, 2014, 04:39:51 PM |
|
so ive got 4 units
2 hash at 437 and 441 2 hash at 418 and 415
emailed bitmain and they asked me for screenshots of the status page
I wonder, what they are going to do with this information? I'm surprised you got a response. I sent a message through their internal messaging system on the 26th and have not heard anything. Two units that won't hash stable over 415. Even offered to NAT two public ip addresses to the units so they could fiddle with them.
|
|
|
|
wolfskill
Newbie
Offline
Activity: 36
Merit: 0
|
|
July 28, 2014, 04:45:45 PM |
|
I received my refund as well.
|
|
|
|
-droid-
Legendary
Offline
Activity: 1050
Merit: 1001
|
|
July 28, 2014, 04:49:04 PM |
|
so ive got 4 units
2 hash at 437 and 441 2 hash at 418 and 415
emailed bitmain and they asked me for screenshots of the status page
I wonder, what they are going to do with this information? well I had sent them screenshots before, but via my iphone on the web GUI and the screenshot cuts off on the right where it says 'Discarded', so everything after that was cut off and they replied saying their engineer is asking for full screenshot as the side was cut off so obviously their engineer wants to see something in one of the spots for either: Stale, Diff, Diff1#, DiffA#, DiffR#, DiffS#, LSDiff, LSTime
|
|
|
|
-droid-
Legendary
Offline
Activity: 1050
Merit: 1001
|
|
July 28, 2014, 04:49:54 PM |
|
so ive got 4 units
2 hash at 437 and 441 2 hash at 418 and 415
emailed bitmain and they asked me for screenshots of the status page
I wonder, what they are going to do with this information? I'm surprised you got a response. I sent a message through their internal messaging system on the 26th and have not heard anything. Two units that won't hash stable over 415. Even offered to NAT two public ip addresses to the units so they could fiddle with them. ive been emailing them back and forth quite a bit for some time regarding my S2's so they probably recognize my email address lol
|
|
|
|
philipma1957
Legendary
Online
Activity: 4312
Merit: 8850
'The right to privacy matters'
|
|
July 28, 2014, 04:50:10 PM |
|
|
|
|
|
Biodom
Legendary
Online
Activity: 3948
Merit: 4460
|
|
July 28, 2014, 04:57:45 PM |
|
so ive got 4 units
2 hash at 437 and 441 2 hash at 418 and 415
emailed bitmain and they asked me for screenshots of the status page
I wonder, what they are going to do with this information? I'm surprised you got a response. I sent a message through their internal messaging system on the 26th and have not heard anything. Two units that won't hash stable over 415. Even offered to NAT two public ip addresses to the units so they could fiddle with them. so far my S3 units resisted any fiddling. One can be accelerated to 237.5, but then one chip drops out (X). I am going to check the unit today and see if, perhaps, there is no or too little thermal paste there. If not, i will just leave it alone at 218.75/441Gh.
|
|
|
|
-droid-
Legendary
Offline
Activity: 1050
Merit: 1001
|
|
July 28, 2014, 04:59:51 PM |
|
so ive got 4 units
2 hash at 437 and 441 2 hash at 418 and 415
emailed bitmain and they asked me for screenshots of the status page
I wonder, what they are going to do with this information? I'm surprised you got a response. I sent a message through their internal messaging system on the 26th and have not heard anything. Two units that won't hash stable over 415. Even offered to NAT two public ip addresses to the units so they could fiddle with them. so far my S3 units resisted any fiddling. One can be accelerated to 237.5, but then one chip drops out (X). I am going to check the unit today and see if, perhaps, there is no or too little thermal paste there. If not, i will just leave it alone at 218.75/441Gh. I just noticed my third unit hashing at 418 has an X, when i reboot it switches to " - " asic status.. resulting in my needed to do a hard power cycle from the PSU
|
|
|
|
Biodom
Legendary
Online
Activity: 3948
Merit: 4460
|
|
July 28, 2014, 05:07:40 PM Last edit: July 28, 2014, 06:03:13 PM by Biodom |
|
so ive got 4 units
2 hash at 437 and 441 2 hash at 418 and 415
emailed bitmain and they asked me for screenshots of the status page
I wonder, what they are going to do with this information? I'm surprised you got a response. I sent a message through their internal messaging system on the 26th and have not heard anything. Two units that won't hash stable over 415. Even offered to NAT two public ip addresses to the units so they could fiddle with them. so far my S3 units resisted any fiddling. One can be accelerated to 237.5, but then one chip drops out (X). I am going to check the unit today and see if, perhaps, there is no or too little thermal paste there. If not, i will just leave it alone at 218.75/441Gh. I just noticed my third unit hashing at 418 has an X, when i reboot it switches to " - " asic status.. resulting in my needed to do a hard power cycle from the PSU in my experience, a hard boot from PSU on S3 sometimes leaves them in a strange lock (pools are all mixed up, etc, etc) and it takes a software boot or two to even them out. However, if you ssh into it, you can issue the following: <enter/return> exit to get out of ssh and it will shutoff in 3sec (you can replace 3 with another number), with fans slowly decelerating over 20-30 sec psu OFF-ON boot after that is benign and does now screw up anything
|
|
|
|
Threader
|
|
July 28, 2014, 05:37:17 PM |
|
Well i got my b2 order in, now i have to wait 3 hours until i get home to start playing with them to people in canada wondering how much VAT ( custom + Tax ) fees. with a declared value of 947USD in Quebec for 2 miners i just paid 159$ CAD heads up, get your credit card ready. Have Fun Everyone and Happy Mining. I have been waiting weeks for this info. Thanks!!! So it costs $100 more that what two S1's use to cost for UPS customs/taxes and clearance at the door ($59) with CC in hand for UPS guy. not as bad as I feared.
|
|
|
|
kpitti
Legendary
Offline
Activity: 924
Merit: 1002
|
|
July 28, 2014, 06:09:36 PM |
|
My refund received. Thank you Bitmain. I am satisfied with shipment and performance of my S3, both are running at 460GH/s. Looking for more orders soon.
|
|
|
|
axpguy
Newbie
Offline
Activity: 27
Merit: 0
|
|
July 28, 2014, 06:43:57 PM |
|
Got my late batch #2 today in Toronto. FYI listed on customs as "server" declared value was each 440$ so it was HST due of 57.23 plus UPS 10$ fee
|
|
|
|
dankefoss
Newbie
Offline
Activity: 22
Merit: 0
|
|
July 28, 2014, 06:57:59 PM |
|
Got my late batch #2 today in Toronto. FYI listed on customs as "server" declared value was each 440$ so it was HST due of 57.23 plus UPS 10$ fee
Our Late Batch 2s should be arriving today as well. Nothing but labels for B3 so far. My B3 that were ordered on 7/11 arrived today. No less than 5 holds for customs review. Needless to say, I am excited!!
|
|
|
|
|