[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[patrike]

Awesome Miner Version 5.1.1

- Default pools can be configured on Antminer R1-LTC
- Added setting for matching on exact IP address when searching for miners
- Tag implementation for miners improved for more efficient display in the compact list mode and to hide empty groups when filtering
- Adjusted to the new Zergpool profit reporting data where the hash rate unit is part of the API
- Added Nicehash pools for Cryptonight-Heavy and Lyra2z
- SRBMiner 1.5.6
- Correction to the scenario where the view mode of the miner list is changed

Since yesterday, the CoinCalculators.io integration will automatically include all coins when Awesome Miner requests the coin information, including the low volume coins that previously were excluded.

[trucobit]

https://bitcointalk.org/index.php?topic=2765610.0

you can think if you can add this new fork of hsrminer if it has api and gives good hash result.

We need a better neoscrypt miner at Nvidia.

About DSTM I still have problems, if someone else has problems that say so. Neither the DSTM that comes pre installed, nor the one that I have uploaded separately work. Nothing comes out in the console, the miner is simply canceled and period, nothing is seen in the console.

I have it deactivated and I already tell you, neither the one that brings nor the one that I have added has managed to work.

[CPTRS777]

Purchased and use awesomeminer on 5 rigs.  Great software!  I hope to have more time to dive in and use all of its available features.

[trucobit]

I have problems with the earnings forecast in Skein.
Each pool and currency I do a minimum test of 2 hours to calculate the deviation of the forecast of currencies day, fee mining and fee pool. Besides, we already know that not all pools are the same.

It is normal to always have a deviation of between 3 and 10% and to correct it in the pool configuration change to 0.97 to 0.90 respectively. In this way the Switch is more accurate in its changes

But I have already found two currencies that the difference is very exaggerated, we speak of between 50% to 78%, coins like PRTX or TIMEC. I noticed that both are Skein, and then the question arises. If the only two coins that I have added for now in Skein give me such a high deviation, will there not be a bad calculation by AW?

PRTX I had to go down almost 78%, that I added it. But MOC COIN of coinscalculator happens to me the same thing, 51% less according to the forecast of coins and profits. I have looked well that the price was correct the one indicated in AW and the one I have in the exchange, and the result has been just half

So it can not be a coincidence and it only happens in Skin. Patrick could you check this? I get 12Ghs in Skein in case it helps.

The currency forecast informs me AW because it can be customized, it works pretty well, close to reality in all currencies except Skein.

[darkneorus]

"actual pool payout performance" stats are stuck on the same values and don't change for many days already.
can you please investigate, patrike?

[sergey1301]

Great article !! But does it work? You have done a great job in telephoning - Awesome Miner. Thank you for that!!

[Allo-4ka]

patrike
A few more icons (link to a folder where I will periodically upload new)  
https://yadi.sk/d/_2ZrfhxI3WoaXx

With the update 5.x.x again there were interruptions in monitoring
Ant works (it can be seen on the pool) ....

In this state they will hang for hours, before the ant's reset
http://images2.imagebam.com/b9/fb/f0/a7b01a882677234.PNG

It would be terrific to see whether API has access to it or not, and not to click on the "summary"
http://images2.imagebam.com/c9/9e/90/09a21a883054924.PNG

[darkneorus]

"actual pool payout performance" stats are stuck on the same values and don't change for many days already.
can you please investigate, patrike?

seems that it's fixed. thank you!

[trucobit]

https://bitcointalk.org/index.php?topic=2765610.0

you can think if you can add this new fork of hsrminer if it has api and gives good hash result.

We need a better neoscrypt miner at Nvidia.

About DSTM I still have problems, if someone else has problems that say so. Neither the DSTM that comes pre installed, nor the one that I have uploaded separately work. Nothing comes out in the console, the miner is simply canceled and period, nothing is seen in the console.

I have it deactivated and I already tell you, neither the one that brings nor the one that I have added has managed to work.

The speeds written in the post is not the same as i experience on my rigs. Excevator is performing faster for me than the hsrminer.(And no dev fee)

I have no problems whit DSTM, did you try diagnostics ?
Set equihash to 1000000 in your profile so it forces it to start DSTM, and use the diagnostics button.

Thanks for your information, I will try excavator for Nvidia. But what about DSTM I do not see any solution, even erase Awesome and reinstall it ... I will pass the diagnosis but it will not be interpreted. I'll see if I give you a solution. Thank you for your advices.

[QiaMiner]

Well I would use it if it worked.

Either sgminer crashes or I have restricted permission.  Plus sent an email for help this morning and still haven't heard back.

Just read the Helpsection.

This Program is AWESOME! I love it!

[madmossy]

Hi Patrike, SRBMiner has just had another update adding support for the StelliteV4 which is due any time soon when it forks.

One thing I have noticed is that when you manually enter the config for SRBMiner the "algo" is always over written with the correct one, which under normal circumstances is fine, but several coins listed on coincalculators have the wrong algo listed.

Turtle Coin and Triton both use CN LiteV7 but they list them as CN Lite which obviously results in rejected shares. If you change the SRB config settings to the correct CN LiteV7 algo, it gets ignored and continues to try CN Lite.

[O-Coin]

Anyone missing LOKI?

Been mining it for several days now all of a sudden coin stats are missing just shows Unspec CNheavy now  I even added Json from whattomine.

Assuming its an api issue or something not in my control.

Thnaks

[trucobit]

There are coins that are not good in Coinscalculator and therefore are causing a bad auto switch.

The problem is in the rewards. For example the MTI currency is listed as 20 reward, but really is 8. Which gives a much higher figure of profits

https://www.coincalculators.io/coin.aspx?crypto=mti+coin-mining-calculator   reward 20 coins

stats pool mining
https://hash4.life/?address=M8DcZhiAevxWbcmSxbt1fmC31wvZvVJQNx    rewards 8 coins

My doubt is that if I correct the reward in the currency, is the difficulty still being updated from coincalculator?

I think it is a big problem that a site that gives this data, has bad coins, because it influences us directly, that's why it should be possible to adjust the reward without stopping to update difficultad and other parameters.

[hashrefinery]

Awesome Miner Version 5.1.1

- Adjusted to the new Zergpool profit reporting data where the hash rate unit is part of the API

Hi Patrike,

Hash Refinery will be adopting this API change soon. Will AM pick up the units automatically or is an update required?

As a note for miners, once the API change is in place the units for ASIC dominated algos (qubit, quark, x11, x13 & scrypt) will change from Mh to Gh.

Cheers!

[MrsDelish]

https://bitcointalk.org/index.php?topic=2765610.0

you can think if you can add this new fork of hsrminer if it has api and gives good hash result.

We need a better neoscrypt miner at Nvidia.

About DSTM I still have problems, if someone else has problems that say so. Neither the DSTM that comes pre installed, nor the one that I have uploaded separately work. Nothing comes out in the console, the miner is simply canceled and period, nothing is seen in the console.

I have it deactivated and I already tell you, neither the one that brings nor the one that I have added has managed to work.

After AM 5.x I have noticed when using managed miners I have to use a Managed Template to change miner/settings in some cases(changing to a different algo), just stopping and selecting a different miner in the Properties windows from the miner list does not actually change the selected miner/settings for it.

[trucobit]

There are coins that appear, I add a pool and then they are no longer available, I go to the pool and by default it is in BTC and the currency does not appear. They are from Coincalculators and small volume coins. I do not know if there are any limitations, I check prices every 17 minutes.

I had to add them through the AWCU extension. Well, I guess the problem is with coincalculators. CTF, CERBERUS are two examples of currencies that today were and then have stopped being in AW, but if they are in Coincalculator

[patrike]

"actual pool payout performance" stats are stuck on the same values and don't change for many days already.
can you please investigate, patrike?

seems that it's fixed. thank you!

Yes, there was a bit too much caching going on so I made some changes yesterday after reading your post.

[patrike]

Awesome Miner Version 5.1.1

- Adjusted to the new Zergpool profit reporting data where the hash rate unit is part of the API

Hi Patrike,

Hash Refinery will be adopting this API change soon. Will AM pick up the units automatically or is an update required?

As a note for miners, once the API change is in place the units for ASIC dominated algos (qubit, quark, x11, x13 & scrypt) will change from Mh to Gh.

Cheers!

Hello,

I need to update Awesome Miner for it. Will you also use the propery "mbtc_mh_factor" to let Awesome Miner know the factor for each algorithm? Then I can start to prepare for the change

[patrike]

Anyone missing LOKI?

Been mining it for several days now all of a sudden coin stats are missing just shows Unspec CNheavy now  I even added Json from whattomine.

Assuming its an api issue or something not in my control.

Thnaks

There are coins that appear, I add a pool and then they are no longer available, I go to the pool and by default it is in BTC and the currency does not appear. They are from Coincalculators and small volume coins. I do not know if there are any limitations, I check prices every 17 minutes.

I had to add them through the AWCU extension. Well, I guess the problem is with coincalculators. CTF, CERBERUS are two examples of currencies that today were and then have stopped being in AW, but if they are in Coincalculator

I was just contacted by the owner of CoinCalculator.io and was informed that their API will no longer return the low volume coins (less than $1000). The change to support this a few days ago was revered and I don't have any more details on this.

This is the reason why a few coins that was available yesterday may no longer be available today.

[patrike]

There are coins that are not good in Coinscalculator and therefore are causing a bad auto switch.

The problem is in the rewards. For example the MTI currency is listed as 20 reward, but really is 8. Which gives a much higher figure of profits

https://www.coincalculators.io/coin.aspx?crypto=mti+coin-mining-calculator   reward 20 coins

stats pool mining
https://hash4.life/?address=M8DcZhiAevxWbcmSxbt1fmC31wvZvVJQNx    rewards 8 coins

My doubt is that if I correct the reward in the currency, is the difficulty still being updated from coincalculator?

I think it is a big problem that a site that gives this data, has bad coins, because it influences us directly, that's why it should be possible to adjust the reward without stopping to update difficultad and other parameters.

When you override the coin properties, Awesome Miner will override all the properties, not only the reward. So you cannot define your own reward while requesting the difficulty from CoinCalculators.

If some coin properties are incorrect from CoinCalculators.io or WhatToMine.com, you can contact them to have it fixed on their side.