Pictures of your mining rigs!

[marcus1986]

just reorganinzed 150 Ghash/sec of cobbled together over time gear into a nice little woodworking project.

3 NFY NF1
1 BPMC BF1
2 KLN K16
2 OSM DIY0
1 Mboard w/ (presently) 3 cards; with 4 planned additional hcard minis each with 8 asics (2 rev.1 ßitfury, 2 rev.2 ßitfury)

after all additions ill be sitting at ~240Ghash/sec

Really nice setup.

[rammy2k2]

[IMG]https://i.imgur.com/r6P8s2d.jpg

When do you expect to see ROI?

Will you see it at all ?

What is this "ROI" thing?

C

Activity: 210 and u dont know whats ROI ? Clearly u have bought your account ...

[jamesg]

Someone said they wanted to see the back of our cabinets so here we go:



Cisco 48 port switch in the middle of the rack with cable management to the left and two 30 amp 208v single phase PDUs to the right. The PDUs are switched so we have them networked to be able to reboot any PSU from anywhere in the world. All network cabling is labeled and corresponds to the ant it goes to. 

[tzortz]

Someone said they wanted to see the back of our cabinets so here we go:



Cisco 48 port switch in the middle of the rack with cable management to the left and two 30 amp 208v single phase PDUs to the right. The PDUs are switched so we have them networked to be able to reboot any PSU from anywhere in the world. All network cabling is labeled and corresponds to the ant it goes to. 

Clean job.

[klondike_bar]

Someone said they wanted to see the back of our cabinets so here we go:



Cisco 48 port switch in the middle of the rack with cable management to the left and two 30 amp 208v single phase PDUs to the right. The PDUs are switched so we have them networked to be able to reboot any PSU from anywhere in the world. All network cabling is labeled and corresponds to the ant it goes to. 

very clean setup - especially marking all the patch cables since those can easily become difficult to trace back to the port/miner if in bundles.

[tomashas]

Got half of my rig built and working the way I want now, running around 5Mh/s, WU isn't as good as I want yet but I'll tackle that problem later.

ASRock H81 Pro, Intel G3220, 4GB RAM, 2x Enermax Platimax 1350W PSU, 6x R9 290

I'm running cgminer on Ubuntu 12.04.4 LTS headless

http://dump.chiko.nl/g/63b9b5.png

http://dump.chiko.nl/g/34208f.png

http://dump.chiko.nl/g/106505.png

Getting cgminer to detect my GPUs headlessly was a pain in the ass, not a single guide I could find contained all the info needed.

[crazyates]

Got half of my rig built and working the way I want now, running around 5Mh/s, WU isn't as good as I want yet but I'll tackle that problem later.

ASRock H81 Pro, Intel G3220, 4GB RAM, 2x Enermax Platimax 1350W PSU, 6x R9 290

I'm running cgminer on Ubuntu 12.04.4 LTS headless

[img ]http://dump.chiko.nl/g/63b9b5.png[/img]

[img ]http://dump.chiko.nl/g/34208f.png[/img]

[img ]http://dump.chiko.nl/g/106505.png[/img]

Getting cgminer to detect my GPUs headlessly was a pain in the ass, not a single guide I could find contained all the info needed.

I have the same keyboard, and it's awesome. Love the aluminum, and the piggy.

[Trillium]

None of the images in this thread have displayed for about 48 hours now? No changes on my end. Anyone else having problems? 

[raskul]

None of the images in this thread have displayed for about 48 hours now? No changes on my end. Anyone else having problems? 

yup, seeing some and not others, right across the site actually.

[crazyates]

None of the images in this thread have displayed for about 48 hours now? No changes on my end. Anyone else having problems? 

I'm so glad you said this! I just moved a week ago, and I finally got internet at my new place 2 nights ago, and the pictures haven't been showing up. I thought it was the new internet circuit, or some DNS crap!

[raskul]

None of the images in this thread have displayed for about 48 hours now? No changes on my end. Anyone else having problems? 

I'm so glad you said this! I just moved a week ago, and I finally got internet at my new place 2 nights ago, and the pictures haven't been showing up. I thought it was the new internet circuit, or some DNS crap!

i know what it'll be.. all those hefty donations the forum has received are weighing down the img-jpg function. this is why the forum is top notch and everything works perfectly, of course. /s.

[SolarSilver]

None of the images in this thread have displayed for about 48 hours now? No changes on my end. Anyone else having problems? 

it's the DDOS protection, the first time you load bitcointalk.org, you get no reply. If you reload, it does load all the next requests in a certain timeframe.

The same applies to the images, just open a broken image in a new tab, reload it and it will load. From then on, all HTML requests will also load the images

[slastar]

Someone said they wanted to see the back of our cabinets so here we go:

https://lh5.googleusercontent.com/-DBqACRXf7cs/Uy7mKA-mMeI/AAAAAAAAHpo/DIjmGsthW8Y/w930-h1240-no/IMG_20140321_135020.jpg

Cisco 48 port switch in the middle of the rack with cable management to the left and two 30 amp 208v single phase PDUs to the right. The PDUs are switched so we have them networked to be able to reboot any PSU from anywhere in the world. All network cabling is labeled and corresponds to the ant it goes to. 

Place PSU in front of AntMiner. Hot air from miner heats up PSU reducing its effectiveness and shortening its life.

[demonmaestro]

None of the images in this thread have displayed for about 48 hours now? No changes on my end. Anyone else having problems? 

it's the DDOS protection, the first time you load bitcointalk.org, you get no reply. If you reload, it does load all the next requests in a certain timeframe.

The same applies to the images, just open a broken image in a new tab, reload it and it will load. From then on, all HTML requests will also load the images

Not true

[CoinToTheMax]

Got half of my rig built and working the way I want now, running around 5Mh/s, WU isn't as good as I want yet but I'll tackle that problem later.

ASRock H81 Pro, Intel G3220, 4GB RAM, 2x Enermax Platimax 1350W PSU, 6x R9 290

I'm running cgminer on Ubuntu 12.04.4 LTS headless

http://dump.chiko.nl/g/63b9b5.png

http://dump.chiko.nl/g/34208f.png

http://dump.chiko.nl/g/106505.png

Getting cgminer to detect my GPUs headlessly was a pain in the ass, not a single guide I could find contained all the info needed.

So how you managed to get those all 6 cards to work ?

[dotcom]

None of the images in this thread have displayed for about 48 hours now? No changes on my end. Anyone else having problems?  

None on my end, pictures are showing fine.

[klondike_bar]

None of the images in this thread have displayed for about 48 hours now? No changes on my end. Anyone else having problems?  

None on my end, pictures are showing fine.

ive been getting about 50/50 luck of images showing over the last few days. Theymos clearly doesnt put much effort into server upgrades for the site

[crazyates]

ive been getting about 50/50 luck of images showing over the last few days. Theymos clearly doesnt put much effort into server upgrades for the site

Not sure it's Theymos' fault, nor that it's a server/hardware problem. It seemed to happen all at once, and the rest of the site loads decent.

[demonmaestro]

is the freakin "proxy"that he is running. This is what happens you you jack with shit that aint broke.
Now go use that money to get an updated forum software.

[iglasses]

No images for me. Different machines. Different internet.
This should be our worst problem.