[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000

[Elmit]

sounds like a 6 hour trial account, ....

[1714187124]

1714187124

[1714187124]

1714187124

[1714187124]

1714187124

[barabeku]

sounds like a 6 hour trial account, ....

owing to aws and wont be suspended. heheh

[FakeAccount]

how to I restrict my wallet to accept 1.2.2 wallet connections only?
if this is not possible, is there a command I can use to forcibly disconnect a specific IP that I can see running previous versions?

[Merick]

how to I restrict my wallet to accept 1.2.2 wallet connections only?
if this is not possible, is there a command I can use to forcibly disconnect a specific IP that I can see running previous versions?

in the conf file

# Known bad peers to be blacklisted
nxt.knownBlacklistedPeers=

separate each IP by a ;

I haven't tried it, but its brother, nxt.wellKnowPeers appears to work, so I would guess this would work also.

Good-Luck & let us know

edit:
# Blacklist peers for 600000 milliseconds (i.e. 10 minutes by default).
nxt.blacklistingPeriod=600000

I'm guessing jack this number up to blacklist them for longer.  I have one peer running the 1.1.0 wallet that I think I am going to try and black list for the next 1000yrs just because

[duplan]

how to I restrict my wallet to accept 1.2.2 wallet connections only?
if this is not possible, is there a command I can use to forcibly disconnect a specific IP that I can see running previous versions?

That is an excellent question . Further , this ought to be adopted as To-Do for BURST . An option to choose to connect to topmost updated connections .

Possibly even within a certain range : Checkboxes to select the versions one wishes to support and-or to exclude . I can see the benefit of it , and You ?

[Elmit]

Daily Horoscope as subscription:

Aquarius BURST-7L8Y-72ZX-LFXS-EM5G5
Aries BURST-QSWP-KVXE-CH4H-4Y72D
Cancer BURST-42ZD-YBNF-B82N-4LFFE
Capricorn BURST-RBDA-7VVS-ACP8-772KB
Gemini BURST-82ZJ-BQA9-7F7Z-EXQG7
Leo BURST-AFCL-8H35-HXCQ-986JZ
Libra BURST-QNWB-YCCS-7CU7-CF4P7
Pisces BURST-R9PF-W7G7-CAX7-AZGKR
Sagittarius BURST-RQ54-ZVTT-XFED-456PR
Scorpio BURST-7EEH-9ZCD-CHF8-FQBPU
Taurus BURST-TWSX-SYWB-RPQD-CENSW
Virgo BURST-KW5D-EAQ2-VC6U-8P5XZ

Subscription cost 10 Bursts and it should be setup for daily (24x3600 seconds =) 86,400 seconds

How to subscribe:
1. open your wallet
2. click on the tab Transaction and sub tab Subscriptions (at the left hand menu)
3. click on the button Create Subscription (at the right upper corner)
4. enter the BURST address from above for your Zodiac sign
5. use as amount 10 BURST
6. click on the button Create Subscription

The IFs:
If you use an amount lower than 10 BURSTs, the daily amounts will be counted as donation.
THANK YOU!

If you use as amount 10 BURSTs, the system will send you daily at this time of the day a message with your subscribed Zodiac message.

If you use an amount more than 10 BURSTs, the system will count the amount above 10 BURSTs as donation.
THANK YOU!

If you use another seconds amount then 86,400 seconds, then the subscription will be shorter or longer. You may receive multiple times the same message, or missing some day's message.

You can cancel any time!


How it works.
Whenever the system finds an incoming amount of 10 or more BURSTs then it will send the message of the day out to the subscriber.

[unsoindovo]

hi!!!

can somebody tell me what are the best setting for blago miner over cryptomining.farm?
just 12TB here.. 50000 stagger...

thanks!!!

[Blago]

hi!!!

can somebody tell me what are the best setting for blago miner over cryptomining.farm?
just 12TB here.. 50000 stagger...

thanks!!!

change  "Paths"

{
   "Mode" : "pool",

   "Server" : "cryptomining.farm",
   "Port": 80,

   "UpdaterAddr" : "cryptomining.farm",
   "UpdaterPort": 80,

   "EnableProxy": false,
   "ProxyPort": 8126,

   "Paths":["C:\\plots+K:\\plots\\","D:\\plots+J:\\plots\\","E:\\plots\\+I:\\plots\\","G:\\plots\\","F:\\plots\\","H:\\plots\\"],
   "CacheSize" : 50000,

   "ShowMsg" : false,
   "ShowUpdates" : false,

   "UseSorting" : true,
   "Debug": false,
   "SendBestOnly": true,
   "TargetDeadline": 1000000,

   "UseFastRcv" : false,
   "SendInterval": 200,
   "UpdateInterval": 1000,

   "UseLog" : true,
   "SkipBadPlots" : true
}

[GenTarkin]

hi!!!

can somebody tell me what are the best setting for blago miner over cryptomining.farm?
just 12TB here.. 50000 stagger...

thanks!!!

change  "Paths"

{
   "Mode" : "pool",

   "Server" : "cryptomining.farm",
   "Port": 80,

   "UpdaterAddr" : "cryptomining.farm",
   "UpdaterPort": 80,

   "EnableProxy": false,
   "ProxyPort": 8126,

   "Paths":["C:\\plots+K:\\plots\\","D:\\plots+J:\\plots\\","E:\\plots\\+I:\\plots\\","G:\\plots\\","F:\\plots\\","H:\\plots\\"],
   "CacheSize" : 50000,

   "ShowMsg" : false,
   "ShowUpdates" : false,

   "UseSorting" : true,
   "Debug": false,
   "SendBestOnly": true,
   "TargetDeadline": 1000000,

   "UseFastRcv" : false,
   "SendInterval": 200,
   "UpdateInterval": 1000,

   "UseLog" : true,
   "SkipBadPlots" : true
}

What does the + sign do?

[Blago]

.......

What does the + sign do?

* added ability to sequential association paths:   "Paths":["C:\\plots","D:\\plots","E:\\plots\\+I:\\plots\\","G:\\plots\\","F:\\plots\\","H:\\plots\\"],
https://bitcointalk.org/index.php?topic=731923.msg9951907#msg9951907

https://bitcointalk.org/index.php?topic=731923.msg10056985#msg10056985
https://bitcointalk.org/index.php?topic=731923.msg10167990#msg10167990
https://bitcointalk.org/index.php?topic=731923.msg9967171#msg9967171

[m3ta]

Someone really needs to redo the image now on the OP.

Spelling "it's"(IT IS/IT HAS) instead of "its" is really pathetic.

http://www.its-not-its.info/

[crowetic]

burst.ninja is vastly superior to any and all existing pools (that I have used) on all levels.

Nice new domain.
Much faster/leaner js ui.
Cleaner layout.
Faster communication

Much love to burstcoin, Catbref, Crowetic holding it down and making one of the most innovative cryptos easier to use, mine and adopt by the masses.

I like u already

Oh, and good price fella's:
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1310560&CatId=4357

Just finally catching up on the thread, I appreciate your words very much, we're doing all that we can to make BURST an even more amazing coin. Thank you!

Our delayed asset announcement was delayed with good reason, and when you see what we have in store next you should be VERY excited. STAY TUNED!

[unsoindovo]

hi!!!

can somebody tell me what are the best setting for blago miner over cryptomining.farm?
just 12TB here.. 50000 stagger...

thanks!!!

change  "Paths"

{
   "Mode" : "pool",

   "Server" : "cryptomining.farm",
   "Port": 80,

   "UpdaterAddr" : "cryptomining.farm",
   "UpdaterPort": 80,

   "EnableProxy": false,
   "ProxyPort": 8126,

   "Paths":["C:\\plots+K:\\plots\\","D:\\plots+J:\\plots\\","E:\\plots\\+I:\\plots\\","G:\\plots\\","F:\\plots\\","H:\\plots\\"],
   "CacheSize" : 50000,

   "ShowMsg" : false,
   "ShowUpdates" : false,

   "UseSorting" : true,
   "Debug": false,
   "SendBestOnly": true,
   "TargetDeadline": 1000000,

   "UseFastRcv" : false,
   "SendInterval": 200,
   "UpdateInterval": 1000,

   "UseLog" : true,
   "SkipBadPlots" : true
}

What does the + sign do?

link plotted files folders,
to be used with just one thread....

[unsoindovo]

Someone really needs to redo the image now on the OP.

Spelling "it's"(IT IS/IT HAS) instead of "its" is really pathetic.

http://www.its-not-its.info/

hi m3ta!!!

all not eng mother tongue appreciate your correction!!!

i'm not joking...

at least, i really appreciate the corrections!!!!

 

[unsoindovo]

hi!!!

can somebody tell me what are the best setting for blago miner over cryptomining.farm?
just 12TB here.. 50000 stagger...

thanks!!!

change  "Paths"

{
   "Mode" : "pool",

   "Server" : "cryptomining.farm",
   "Port": 80,

   "UpdaterAddr" : "cryptomining.farm",
   "UpdaterPort": 80,

   "EnableProxy": false,
   "ProxyPort": 8126,

   "Paths":["C:\\plots+K:\\plots\\","D:\\plots+J:\\plots\\","E:\\plots\\+I:\\plots\\","G:\\plots\\","F:\\plots\\","H:\\plots\\"],
   "CacheSize" : 50000,

   "ShowMsg" : false,
   "ShowUpdates" : false,

   "UseSorting" : true,
   "Debug": false,
   "SendBestOnly": true,
   "TargetDeadline": 1000000,

   "UseFastRcv" : false,
   "SendInterval": 200,
   "UpdateInterval": 1000,

   "UseLog" : true,
   "SkipBadPlots" : true
}

   "TargetDeadline": 1000000,??

why so high???

how do you choose this value?

[unsoindovo]

[miner]

new version Burst-miner v1.150223
http://www.dropbox.com/s/9p6p5mxfjvfcspx/miner-burst-1.150223.zip?dl=0

+ Added memory cleaning.
   After reading all plots, miner clears the cache Windows




+ Added an option to disable the log.
   "UseLog" : false,
   (by default - true)

+ Added an option to process files with non-matching filesize / filename
  "SkipBadPlots" : false
   (by default - true)

src: https://github.com/Blagodarenko/miner-burst

i'm testing your miner just now!!!

good job blago!!!!

the ram it is shutted down..

just specify to run "miner.exe" as administrator...

or you get error when you execute memory clean!

[equipoise]

[miner]

new version Burst-miner v1.150223
http://www.dropbox.com/s/9p6p5mxfjvfcspx/miner-burst-1.150223.zip?dl=0

+ Added memory cleaning.
   After reading all plots, miner clears the cache Windows




+ Added an option to disable the log.
   "UseLog" : false,
   (by default - true)

+ Added an option to process files with non-matching filesize / filename
  "SkipBadPlots" : false
   (by default - true)

src: https://github.com/Blagodarenko/miner-burst

i'm testing your miner just now!!!

good job blago!!!!

the ram it is shutted down..

just specify to run "miner.exe" as administrator...

or you get error when you execute memory clean!

I had to switch to the previous version. I'm on Win7 16GB RAM and 25 TB plots. The new "clear the cache" version makes all my other programs very slow and I'm using it for many other things and not just for mining. There should be an option if you want the cache cleared, because it definitely makes my PC almost useless for anything else then burst mining.

[callmejack]

Problem is the I have only 6 ~ hrs to set up

Do you mean that your plotted files will be deleted after 6 hours?

Yes, they will shutdown, and all files will be deleted forever. I need to create my own image in 6hrs.

Lets break this down.

You have access to 1000+ Amazon C3 instances, each one having these specs
32vCPU   60GB RAM   2 x 320 GB SSD

But you only have this massive farm 6hrs each day.

That's roughly 640TB worth of mining power coming on for 6hrs each day.

Your efforts are nothing but bad for the Burst Network.  You want to move 640TB worth of data within 6rs.... 640TB in  6hrs  .  1000+ instances each one have 2x 320GB SSD drives.  That's 640TB  you need to store the plots some place and then upload them to your instances each day.

I'm pretty sure this is not possible, and how does someone get access to that type of computing power for 6hrs each day.  You could make this work on a smaller scale, but I have no desire to see large scale miners only pop on for 6hrs each day.  Good-luck

if the machines have ssd storage simply add a startup script with a random 64 bit nonce number to start the plots for the machine with.
with only 1000+ instances overlaps should be no real issue.
plot on each startup 40 16 gb files as background job and connect all to a own wallet server or to multiple wallets.
using a pool is almost impossible due to the load you generate. so i would go with 100 nodes onto one dedicated wallet at the beginning.
increasing or decreasing this number can be done load dependant. the tricky part is to configure which machine contacts which wallet.
you may run any scm to distribute the machines config files.
each time a machine boots it loads its mining config from the headrevision and starts to plot and to mine.
but this requires a bit of development and testing.
also have in mind that the wallet servers should stay always on to be always in sync.

plotting should run with at least about 20-30k nonces/minute. this means your drives are filled up after roughly two hours.
put the plotting process into nice in a own screen.
after the plotting is done you may mine any cpu coin on the almost idling cpu cores ;-)

tell me how it works. its really an interesting approach  

[daWallet]

FYI.

I've been quite active in this thread, many would prolly say too active (including myself ) But due to severe health issues, I've to concentrate more on other things for the time being. I could make this too long a post again (as I already done too many times), but three things needs to be said: 1) We have 17 other members in the "teams", not three or five. 17 dedicated members; 2) I'm quite big holder of burst but no sell-order will be mine, and 3) for as long it is possible, I'll hang around here in this thread and at btt - even make a post or two

Get well soon! Thanks for everything you've done behind the scenes.

[crowetic]

-[Quick Announcement for burst.ninja pool]-

We've evened out the distribution of coins for payouts, hopefully benefitting everyone who has had issue with payouts, if you'd like please come back and give it another go. We've also implemented a way to change this distribution method more easily, and we can now fully customize payouts fairly simply. This means we can help our miners come to the perfect BURST fair payout distribution.

We've fixed wrong Difficulty (at the top) issue.

We've fixed lag issue causing a few missed blocks.

We've fixed lag issue on submission of shares.

We  have many more plans. New UI coming soon to match ninja domain. Stay tuned! Come back and try us again if you were unhappy before, let us know what you think, we're constantly trying to improve for our miners. Thank you!