HunterS
|
|
August 15, 2014, 12:56:52 PM |
|
i have mined since start.finally finsished plotting 1.8 TB hard drive today and i have found 32 blocks
can someone please advise on these plots settings on my primary pc: 1097082171119035817_0_204800_1000 1097082171119035817_1_800000_500 1097082171119035817_1_3200000_500 (still plotting after 2+ days) 1097082171119035817_1_80000000_500 (still plotting after 2+ days) thinking I error'd in these plot settings, maybe I need to redo...? not quite sure but it looks like u have plots over lapping
|
|
|
|
cad_cdn
|
|
August 15, 2014, 01:01:03 PM |
|
kinda what I suspected. the 800000 and 80000000? i have mined since start.finally finsished plotting 1.8 TB hard drive today and i have found 32 blocks
can someone please advise on these plots settings on my primary pc: 1097082171119035817_0_204800_1000 1097082171119035817_1_800000_500 1097082171119035817_1_3200000_500 (still plotting after 2+ days) 1097082171119035817_1_80000000_500 (still plotting after 2+ days) thinking I error'd in these plot settings, maybe I need to redo...? not quite sure but it looks like u have plots over lapping
|
|
|
|
shlsumy
Newbie
Offline
Activity: 35
Merit: 0
|
|
August 15, 2014, 01:02:41 PM |
|
how i can start generate plat on next HDD?
Cent Os
2-nd HDD mount on
/mnt/disk1/
please help me
|
|
|
|
103deltafox
|
|
August 15, 2014, 01:07:21 PM |
|
kinda what I suspected. the 800000 and 80000000? i have mined since start.finally finsished plotting 1.8 TB hard drive today and i have found 32 blocks
can someone please advise on these plots settings on my primary pc: 1097082171119035817_0_204800_1000 1097082171119035817_1_800000_500 1097082171119035817_1_3200000_500 (still plotting after 2+ days) 1097082171119035817_1_80000000_500 (still plotting after 2+ days) thinking I error'd in these plot settings, maybe I need to redo...? not quite sure but it looks like u have plots over lapping All of them are going to overlap... One drive needs to be 0 204800 next drive 204801 1004801 next drive 1004802 4204802 and lastly 4204803 7404803 that way your plots are all for the same account #, but are all spaced out and will have the greatest possibility of generating a block...
|
|
|
|
|
Blago
|
|
August 15, 2014, 01:15:02 PM |
|
@paulthetafy 2k burst, бpaт
|
Relax, I’m russian!... BURST-B2LU-SGCZ-NYVS-HZEPK
|
|
|
jopara
Newbie
Offline
Activity: 41
Merit: 0
|
|
August 15, 2014, 01:39:50 PM |
|
Sell 10K - 200K BURST Negotiable
|
|
|
|
cad_cdn
|
|
August 15, 2014, 01:40:15 PM |
|
thx for help, so they are useless, I should delete them, or can I rename the files and the bat's used? kinda what I suspected. the 800000 and 80000000? i have mined since start.finally finsished plotting 1.8 TB hard drive today and i have found 32 blocks
can someone please advise on these plots settings on my primary pc: 1097082171119035817_0_204800_1000 1097082171119035817_1_800000_500 1097082171119035817_1_3200000_500 (still plotting after 2+ days) 1097082171119035817_1_80000000_500 (still plotting after 2+ days) thinking I error'd in these plot settings, maybe I need to redo...? not quite sure but it looks like u have plots over lapping All of them are going to overlap... One drive needs to be 0 204800 next drive 204801 1004801 next drive 1004802 4204802 and lastly 4204803 7404803 that way your plots are all for the same account #, but are all spaced out and will have the greatest possibility of generating a block...
|
|
|
|
103deltafox
|
|
August 15, 2014, 02:04:10 PM |
|
thx for help, so they are useless, I should delete them, or can I rename the files and the bat's used? kinda what I suspected. the 800000 and 80000000? i have mined since start.finally finsished plotting 1.8 TB hard drive today and i have found 32 blocks
can someone please advise on these plots settings on my primary pc: 1097082171119035817_0_204800_1000 1097082171119035817_1_800000_500 1097082171119035817_1_3200000_500 (still plotting after 2+ days) 1097082171119035817_1_80000000_500 (still plotting after 2+ days) thinking I error'd in these plot settings, maybe I need to redo...? not quite sure but it looks like u have plots over lapping All of them are going to overlap... One drive needs to be 0 204800 next drive 204801 1004801 next drive 1004802 4204802 and lastly 4204803 7404803 that way your plots are all for the same account #, but are all spaced out and will have the greatest possibility of generating a block... I have personally had really good luck with the following settings...but that may just be me (around 27 blocks) and I using just over a full TB combined on 4 computers, but with 4 different wallets... (1x500Gig, 1x260Gig, 1x450Gig, 1x200Gig) If your on windows, you could set up your run_generate files like so: C:\Windows\SysWOW64\java -Xmx1000m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate 1097082171119035817 0 204800 1024 5 C:\Windows\SysWOW64\java -Xmx1000m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate 1097082171119035817 204801 1004801 1024 5 C:\Windows\SysWOW64\java -Xmx1000m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate 1097082171119035817 1004802 4204802 1024 5 C:\Windows\SysWOW64\java -Xmx1000m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate 1097082171119035817 4204803 7404803 1024 5
|
|
|
|
crowetic
Legendary
Offline
Activity: 2282
Merit: 1072
https://crowetic.com | https://qortal.org
|
|
August 15, 2014, 02:17:12 PM |
|
Glad someone is having good luck, because all of a sudden I'm not getting anything
|
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▒ ▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▒ ▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓ ▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓ ▒▒▒▒▒▒ ▓▓▓▓▓▓▒ ▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▒ ▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▒ ▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒ ▓▓▓▓▓▓▒ ▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓
| ORTAL
| .⊙.Web and Application hosting. ⊙ decentralized infrastructure .⊙.leveling and voting.
| Founder/current dev group facilitator |
[/td][/tr][/table] [/table]
|
|
|
cad_cdn
|
|
August 15, 2014, 02:18:41 PM |
|
thank you. I'm following your advice.... deleted the bad plots...sigh.... thx for help, so they are useless, I should delete them, or can I rename the files and the bat's used? kinda what I suspected. the 800000 and 80000000? i have mined since start.finally finsished plotting 1.8 TB hard drive today and i have found 32 blocks
can someone please advise on these plots settings on my primary pc: 1097082171119035817_0_204800_1000 1097082171119035817_1_800000_500 1097082171119035817_1_3200000_500 (still plotting after 2+ days) 1097082171119035817_1_80000000_500 (still plotting after 2+ days) thinking I error'd in these plot settings, maybe I need to redo...? not quite sure but it looks like u have plots over lapping All of them are going to overlap... One drive needs to be 0 204800 next drive 204801 1004801 next drive 1004802 4204802 and lastly 4204803 7404803 that way your plots are all for the same account #, but are all spaced out and will have the greatest possibility of generating a block... I have personally had really good luck with the following settings...but that may just be me (around 27 blocks) and I using just over a full TB combined on 4 computers, but with 4 different wallets... (1x500Gig, 1x260Gig, 1x450Gig, 1x200Gig) If your on windows, you could set up your run_generate files like so: C:\Windows\SysWOW64\java -Xmx1000m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate 1097082171119035817 0 204800 1024 5 C:\Windows\SysWOW64\java -Xmx1000m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate 1097082171119035817 204801 1004801 1024 5 C:\Windows\SysWOW64\java -Xmx1000m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate 1097082171119035817 1004802 4204802 1024 5 C:\Windows\SysWOW64\java -Xmx1000m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate 1097082171119035817 4204803 7404803 1024 5
|
|
|
|
belief
|
|
August 15, 2014, 02:36:39 PM |
|
NXT has encountered big stealth at beter, may ruin NXT, but burst is a good coin with a good mining way , so burst will take the nxt's place
|
|
|
|
crowetic
Legendary
Offline
Activity: 2282
Merit: 1072
https://crowetic.com | https://qortal.org
|
|
August 15, 2014, 02:41:55 PM |
|
I just realized I had one of my plots set wrong, does anyone know what will happen in this case...
I had my first at 0 800000 1000 then my second at 800000 1600000 1000
as you can see, the 800000 will overlap, what does this mean for me, should I start a new plot without a single overlapping number?
|
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▒ ▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▒ ▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓ ▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓ ▒▒▒▒▒▒ ▓▓▓▓▓▓▒ ▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▒ ▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▒ ▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒ ▓▓▓▓▓▓▒ ▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓
| ORTAL
| .⊙.Web and Application hosting. ⊙ decentralized infrastructure .⊙.leveling and voting.
| Founder/current dev group facilitator |
[/td][/tr][/table] [/table]
|
|
|
WolfOf
Newbie
Offline
Activity: 21
Merit: 0
|
|
August 15, 2014, 02:45:39 PM |
|
I just realized I had one of my plots set wrong, does anyone know what will happen in this case...
I had my first at 0 800000 1000 then my second at 800000 1600000 1000
as you can see, the 800000 will overlap, what does this mean for me, should I start a new plot without a single overlapping number?
Dont worry,it's ok.
|
|
|
|
ROBERTO
Legendary
Offline
Activity: 1421
Merit: 1001
|
|
August 15, 2014, 02:48:15 PM |
|
I try to make some test but understand nothing!!
sh run_generate.sh XXXXXXXXXXXXXXX 2049 4097 1024 8 /run that command for generate auto finish at nonce 4097 Generating from nonce: 2049 Writing from nonce 2049 Generating from nonce: 3073 Writing from nonce 3073 Generating from nonce: 4097 Writing from nonce 4097 Generating from nonce: 5121 Writing from nonce 5121 Generating from nonce: 6145 Writing from nonce 6145
But generating continu and stop at 6145? Why?
Can someone help me to understand
|
|
|
|
luxe
|
|
August 15, 2014, 02:48:22 PM Last edit: August 15, 2014, 03:01:00 PM by luxe |
|
I just realized I had one of my plots set wrong, does anyone know what will happen in this case...
I had my first at 0 800000 1000 then my second at 800000 1600000 1000
as you can see, the 800000 will overlap, what does this mean for me, should I start a new plot without a single overlapping number?
should be no problem you start at 0 so first goes from 0-799999, but you second will have double size than first ... 800000 800000 1000 would be same size. 2nd nuber is size and not were it ends. I try to make some test but understand nothing!!
sh run_generate.sh 8130010810251360704 2049 4097 1024 8 /run that command for generate auto finish at nonce 4097 Generating from nonce: 2049 Writing from nonce 2049 Generating from nonce: 3073 Writing from nonce 3073 Generating from nonce: 4097 Writing from nonce 4097 Generating from nonce: 5121 Writing from nonce 5121 Generating from nonce: 6145 Writing from nonce 6145
But generating continu and stop at 6145? Why?
Can someone help me to understand
2049+4097 = ~6145 ... or 6146 but its -1 as 2049 is the first one
|
|
|
|
Sy
Legendary
Offline
Activity: 1484
Merit: 1003
Bounty Detective
|
|
August 15, 2014, 02:51:46 PM |
|
You guys confuse the second number, it was never "generate from 0 to 800000" it is "generate from 0, increase by one, repeat 800000 times" so the next plot is "generate from 800000 and repeat 800000 times" you never have to change the second number, it just tells the miner how many plots to generate from there.
What you did is 1097082171119035817_0_204800_1000 Generate from 0 to 204800, write to file once you got 1000 1097082171119035817_1_800000_500 Generate from 1 to 800000, write once you got 500 (overlapping the first one) 1097082171119035817_1_3200000_500 (still plotting after 2+ days) Generate from 1 to 3200000, write once you got 500 (overlapping the first one) 1097082171119035817_1_80000000_500 (still plotting after 2+ days) Generate from 1 to 80000000, write once you got 500 (overlapping the first one)
So you are basicly creating the same plots all the time and just went farther, thats why the others are still running.
The first one will be 51gb, the second one 200gb, third 800gb and finally the last one 20 tb xD
|
|
|
|
crowetic
Legendary
Offline
Activity: 2282
Merit: 1072
https://crowetic.com | https://qortal.org
|
|
August 15, 2014, 02:52:29 PM |
|
I just realized I had one of my plots set wrong, does anyone know what will happen in this case...
I had my first at 0 800000 1000 then my second at 800000 1600000 1000
as you can see, the 800000 will overlap, what does this mean for me, should I start a new plot without a single overlapping number?
should be no problem you start at 0 so fist goes from 0-799999, but you second will have double size than first ... 800000 800000 1000 would be same size. 2nd nuber is size and not were it ends. I try to make some test but understand nothing!!
sh run_generate.sh 8130010810251360704 2049 4097 1024 8 /run that command for generate auto finish at nonce 4097 Generating from nonce: 2049 Writing from nonce 2049 Generating from nonce: 3073 Writing from nonce 3073 Generating from nonce: 4097 Writing from nonce 4097 Generating from nonce: 5121 Writing from nonce 5121 Generating from nonce: 6145 Writing from nonce 6145
But generating continu and stop at 6145? Why?
Can someone help me to understand
2049+4097 = 6145 ... OOHHHHH, ok, shit, lol... That means I need to make a few changes. Thanks!
|
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▒ ▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▒ ▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓ ▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓ ▒▒▒▒▒▒ ▓▓▓▓▓▓▒ ▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▒ ▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▒ ▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒ ▓▓▓▓▓▓▒ ▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓
| ORTAL
| .⊙.Web and Application hosting. ⊙ decentralized infrastructure .⊙.leveling and voting.
| Founder/current dev group facilitator |
[/td][/tr][/table] [/table]
|
|
|
reza_abay
Member
Offline
Activity: 94
Merit: 10
|
|
August 15, 2014, 02:52:57 PM |
|
I just realized I had one of my plots set wrong, does anyone know what will happen in this case...
I had my first at 0 800000 1000 then my second at 800000 1600000 1000
as you can see, the 800000 will overlap, what does this mean for me, should I start a new plot without a single overlapping number?
should be no problem you start at 0 so fist goes from 0-799999, but you second will have double size than first ... 800000 800000 1000 would be same size. 2nd nuber is size and not were it ends. I try to make some test but understand nothing!!
sh run_generate.sh 8130010810251360704 2049 4097 1024 8 /run that command for generate auto finish at nonce 4097 Generating from nonce: 2049 Writing from nonce 2049 Generating from nonce: 3073 Writing from nonce 3073 Generating from nonce: 4097 Writing from nonce 4097 Generating from nonce: 5121 Writing from nonce 5121 Generating from nonce: 6145 Writing from nonce 6145
But generating continu and stop at 6145? Why?
Can someone help me to understand
2049+4097 = 6145 ... you can edit example: sh run_generate.sh 8130010810251360704 2049 2048 1024 8 for 4097 nonce
|
|
|
|
SpeedDemon13
|
|
August 15, 2014, 02:53:25 PM |
|
If anyone is interested, the conclusion of my test to see if I could speed up plot generation by farming it out using cluster/cloud computing is: Yes it can be done, but it is probably not worth it. This is what I did using Amazon EC2... First I created a single instance (2 core) to act as the server for the plot storage and also act as the wallet server / miner. This instance had a 1TB Elastic Block Store volume attached to it (1TB is max EBS volume size on AWS). I made this volume available to the network using NFS I then created a "plot generator" instance with much higher CPU capacity (C3.xlarge 8 core). I mounted the shared volume so it appeared like a local disk and started creating 10GB plots I then created a few scripts so that upon startup the instance would auto-mount the NFS volume, figure out what the last used nonce range was, and start mining from the next 10GB plot Finally, I created an image of this instance and spooled up 100 more instances like it (spot rates, nice and cheap). To begin with it all looked great but I soon hit the bandwidth limit of the instance I was using as the server. In essence the server didn't have enough network bandwidth to cope with all of the data being copied to it. This restricted plot creation to a little over 100GB / hour. Changing the instance type of the server instance to one with a "high" network performance got this up to around 400 GB/hour. If I had have left it running I would have created all 1 TB of plots in 2.5 hours, at a cost of around $20. This could have been repeated or even parallelized to create several 1TB volumes full of plots in a relatively short amount of time. After all the fiddling about getting it working, I spent around $70 testing this stuff out, only to conclude it was too much hassle. And as OP said earlier, the cost of EBS storage on AWS is too high to make this a viable long term mining option. That said, had I have done all of this on day one, I would have scaled the process out and had 10TB+ up within the first few hours and dominated the mining. Good to know I have the process licked for the next PoC coin Unfortunately I STILL don't have any BURST as I don't have any spare capacity at home so haven't been able to mine at all So if anyone would like to donate some coins to offset the cost of testing all of this, my address is BURST-WADY-CBZE-HSJU-2NH5G Many thanks! At $70 per day, that's $2100 per month. You can nearly buy a mobo, a used 6/12 core (12/24 threads) Intel cpu, Ram and some HDD's for that price, give or take....LOL Sorry you misunderstood - I spent $70 figuring this out. It would cost $20 to generate 1 TB in 2.5 hours (instead of a couple of days so you are mining at full pelt quicker). Once it is generated, it would cost around $15 a month for the server and $100 a month for storage. And at current rates that would probably still be profitable Thanks for the breakdown, it was kind of vague on how the total came to be. That's ok, but I guess a couple days waiting for plot to be created isn't that bad and only an inconvenience. That's money that can be save towards buying more storage to mine with.
|
CRYPTSY exchange: https://www.cryptsy.com/users/register?refid=9017 BURST= BURST-TE3W-CFGH-7343-6VM6R BTC=1CNsqGUR9YJNrhydQZnUPbaDv6h4uaYCHv ETH=0x144bc9fe471d3c71d8e09d58060d78661b1d4f32 SHF=0x13a0a2cb0d55eca975cf2d97015f7d580ce52d85 EXP=0xd71921dca837e415a58ca0d6dd2223cc84e0ea2f SC=6bdf9d12a983fed6723abad91a39be4f95d227f9bdb0490de3b8e5d45357f63d564638b1bd71 CLAMS=xGVTdM9EJpNBCYAjHFVxuZGcqvoL22nP6f SOIL=0x8b5c989bc931c0769a50ecaf9ffe490c67cb5911
|
|
|
|