clgrissom3
Legendary
 Offline
Activity: 1722
Merit: 1032
Carl, aka Sonny :)
|
 |
November 24, 2016, 02:45:45 AM |
|
Hi all..first post here but been reading the posts for some time. Anyway just wanted to get some suggestions about the wallet I'm using for my pool payments. I've been mining with this pool for right around a month just using a btc address instead of registering. I know the benefits of registering but that's not my issue. When I started and currently I'm using a Coinbase wallet address for pool payments and while I haven't mined within the period of time the IRS is asking for records of I still have some concerns as to if it would be a good idea to continue to use Coinbase as my wallet or if there are valid reasons that I should dump my balance over to another wallet platform. Open to suggestions and have appreciated the advice I have found here already thanks in advance .
trezor You guys were making me nervous so I just transferred my balance from Coinbase to my KeepKey (about 4 coins). I do this normally anyway once it goes over 1 or 2 coins so I don't have any real balance open to hackers but I had let it go a bit too ling this time around. Total time to complete the transaction and get all the required confirms...12 minutes. Now I just unplug my KeepKey, put it in my safe next to my Glock, and all is good! |
|
|
|
|
|
wmabern
|
|
November 24, 2016, 02:46:16 AM |
|
'bout time to knock this ugly, red block to the curb and start hitting some FLUFFY, GREEN BLOCKS!!!!  Come on BLOCKSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS!!!  Let's make this a very Happy Thanksgiving day with FOUR-PLUS BLOCKS TODAY!! We can do it!!!  "Everybody else is just GREEN, Have you seen the chart? It's a helluva start, It could be made into a monster If we all pull together as a team. And did we tell you the name of the game, boy, We call it Riding the Gravy Train........" ~Pink Floyd |
BITMIXER.IO Gone Baby, Gone.. ;-)
Not any good sig campaigns out there that I want!
|
|
|
firetreeactual
Legendary
Offline
Activity: 952
Merit: 1003
|
|
November 24, 2016, 03:29:41 AM |
|
You guys were making me nervous so I just transferred my balance from Coinbase to my KeepKey (about 4 coins). I do this normally anyway once it goes over 1 or 2 coins so I don't have any real balance open to hackers but I had let it go a bit too ling this time around. Total time to complete the transaction and get all the required confirms...12 minutes.
Now I just unplug my KeepKey, put it in my safe next to my Glock, and all is good!
Sounds like here...my flash backups, pending data recoveries, etc. are in my safe...next to my Glock. Yowza. |
To infinity and beyond...on two 741s and one of only 3...nope, make that 4...full nodes in Hawaii...on <30A. (I have other gear on the Hoth ice planet)
|
|
|
-ck
Legendary
Offline
Activity: 4144
Merit: 1638
Ruu \o/
|
|
November 24, 2016, 05:56:35 AM |
|
I'm pleased to announce that I've received an ava7 gratis as well from canaan for continued support of this device in cgminer and am already running it on the master cgminer code on this pool.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel
2% Fee Solo mining at solo.ckpool.org
-ck
|
|
|
kano (OP)
Legendary
Offline
Activity: 4536
Merit: 1847
Linux since 1997 RedHat 4
|
|
November 24, 2016, 05:57:44 AM |
|
You guys were making me nervous so I just transferred my balance from Coinbase to my KeepKey (about 4 coins). I do this normally anyway once it goes over 1 or 2 coins so I don't have any real balance open to hackers but I had let it go a bit too ling this time around. Total time to complete the transaction and get all the required confirms...12 minutes.
Now I just unplug my KeepKey, put it in my safe next to my Glock, and all is good!
Sounds like here...my flash backups, pending data recoveries, etc. are in my safe...next to my Glock. Yowza. My (final) ones are on my desk, safely next to my R2D2 USB and Tenshi Nendoroid  ... though that's an encrypted drive that even I don't know the password to |
|
|
|
usukan
Legendary
Offline
Activity: 1590
Merit: 1002
|
|
November 24, 2016, 06:13:44 AM |
|
I'm getting bored again............  our luck will improve now! |
--
--
|
|
|
kano (OP)
Legendary
Offline
Activity: 4536
Merit: 1847
Linux since 1997 RedHat 4
|
|
November 24, 2016, 06:40:32 AM
Last edit: November 24, 2016, 08:32:46 AM by kano |
|
So ... I have an A7 mining on the pool right now I'll add a menu a bit later so people can see my workers - if anyone is interested. I'll post here when it's done. Miner is actually no where near as loud as I expected - and it's 26C here (and I have it in the laundry which is about 28C after running the dryer an hour ago) It's hopping around 2300 to 2500 RPM for me - in the middle to low 60's dBA (i.e. certainly under 70 dBA) It's temperature says it's 31C Need to let it run for an hour or so to get a reasonable hash rate estimate. For anyone who uses the default RPi image (as of today) on canaan.io - it's setup for static IP 192.168.0.100 So you may have to login to that and switch it to DHCP if you have more than one - or if you have a lot, set that in the image. Very cool Kano! I can't wait to see what you you get with your new toy! OK it's up and working. Everyone logged in now has 2 extra options in the 'Workers' menu: K.Workers and K.Graph - that shows my data below the menu (still your data above top right) Edit: oh I'll take it down to the garage at some point later and thus it will have a short outage - but the shift will show that after I do it - it seems they start a little slower then climb up for an hour or so to get the speed right. Edit2: though it's clear from the Workers page, you can separate out the A6s and A7s on my graph by using at the top "all" ".A6*" and ".A7*" and pressing "Update" - though it will forget your settings if you already had some for your workers. Edit3: moved - so it was off for a bit over half an hour. |
|
|
|
usukan
Legendary
Offline
Activity: 1590
Merit: 1002
|
|
November 24, 2016, 09:52:51 AM |
|
So ... I have an A7 mining on the pool right now I'll add a menu a bit later so people can see my workers - if anyone is interested. I'll post here when it's done. Miner is actually no where near as loud as I expected - and it's 26C here (and I have it in the laundry which is about 28C after running the dryer an hour ago) It's hopping around 2300 to 2500 RPM for me - in the middle to low 60's dBA (i.e. certainly under 70 dBA) It's temperature says it's 31C Need to let it run for an hour or so to get a reasonable hash rate estimate. For anyone who uses the default RPi image (as of today) on canaan.io - it's setup for static IP 192.168.0.100 So you may have to login to that and switch it to DHCP if you have more than one - or if you have a lot, set that in the image. Very cool Kano! I can't wait to see what you you get with your new toy! OK it's up and working. Everyone logged in now has 2 extra options in the 'Workers' menu: K.Workers and K.Graph - that shows my data below the menu (still your data above top right) Edit: oh I'll take it down to the garage at some point later and thus it will have a short outage - but the shift will show that after I do it - it seems they start a little slower then climb up for an hour or so to get the speed right. Edit2: though it's clear from the Workers page, you can separate out the A6s and A7s on my graph by using at the top "all" ".A6*" and ".A7*" and pressing "Update" - though it will forget your settings if you already had some for your workers. Edit3: moved - so it was off for a bit over half an hour. isn't 5THs about half what an A7 should do? Kano.A7 5.096k 1s 8,397 35,604,892 7.58THs 26s 0.532% 0.004% 5.24THs also - Pool has is currently displayed as 32 THs not 32 PHsCKPool: 32,745.50THs Shares: 941,824,361,119 (334.22%) Invalids: 1.1M (0.62%) · 3.6G (0.38%) |
--
--
|
|
|
kano (OP)
Legendary
Offline
Activity: 4536
Merit: 1847
Linux since 1997 RedHat 4
|
|
November 24, 2016, 10:59:45 AM |
|
...
isn't 5THs about half what an A7 should do?
You been smoking something? Kano.A7 5.096k 1s 8,397 35,604,892 7.58THs 26s 0.532% 0.004% 5.24THs
also - Pool has is currently displayed as 32THs not 32 PHs
CKPool: 32,745.50THs
Shares: 941,824,361,119 (334.22%)
Invalids: 1.1M (0.62%) · 3.6G (0.38%)
That says 32PH ... And that page also says 7.58THs ... yeah funny about the inaccuracy of hash rates  Also as I said above ... it takes a while to ramp up ... Also looking at one number when there's a graph of quite a few that says otherwise ... |
|
|
|
|
hhumaidan
|
|
November 24, 2016, 11:37:42 AM |
|
...
isn't 5THs about half what an A7 should do?
You been smoking something? Kano.A7 5.096k 1s 8,397 35,604,892 7.58THs 26s 0.532% 0.004% 5.24THs
also - Pool has is currently displayed as 32THs not 32 PHs
CKPool: 32,745.50THs
Shares: 941,824,361,119 (334.22%)
Invalids: 1.1M (0.62%) · 3.6G (0.38%)
That says 32PH ... And that page also says 7.58THs ... yeah funny about the inaccuracy of hash rates Also as I said above ... it takes a while to ramp up ... Also looking at one number when there's a graph of quite a few that says otherwise ... Sweet that you got an A7! How are the temps and noise so far Kano? Also, what about power consumption? I am waiting for my units to point them here. |
|
|
|
|
kano (OP)
Legendary
Offline
Activity: 4536
Merit: 1847
Linux since 1997 RedHat 4
|
|
November 24, 2016, 11:47:31 AM |
|
...
Sweet that you got an A7!
How are the temps and noise so far Kano?
Also, what about power consumption?
I am waiting for my units to point them here.
Well while I had it up here in the laundry it was ok - no jet engine noises. Now I've moved it down to the garage ... no idea long term how much noise it makes ... but once it got to over 6THs the fan was noticeable, but still not jet engine levels. Power is around the 1000W mark - mine went over to ~1070W but I only had 4 plugs in it. In the garage I connected 8 plugs (4 leads with 2 plugs each) and it hadn't got to 1000W yet when I went and turned on the old A6s. So somewhere around 1000W - but it takes a while to ramp up - and that's actually to do with 16nm chips and making sure they're all ok. I wont be surprised if people find the A7s way more reliable than the recent Bitmain problem miner - but we'll see. |
|
|
|
xxxgeniy
Member
Offline
Activity: 89
Merit: 10
|
|
November 24, 2016, 01:18:56 PM |
|
BTClock! by sashaandrey70 with 93Th! First block today!
|
St.Lapland Farm
|
|
|
philipma1957
Legendary
Offline
Activity: 4172
Merit: 8061
'The right to privacy matters'
|
|
November 24, 2016, 01:34:56 PM |
|
BTClock! by sashaandrey70 with 93Th! First block today!
yep and my stuck transaction is fixed thank you sashaandrey70 and thanks kano |
|
|
|
clgrissom3
Legendary
Offline
Activity: 1722
Merit: 1032
Carl, aka Sonny :)
|
|
November 24, 2016, 02:03:19 PM |
|
I'm pleased to announce that I've received an ava7 gratis as well from canaan for continued support of this device in cgminer and am already running it on the master cgminer code on this pool.
Alright! Now the complete brain trust is covered! Let us know good things |
|
|
|
|
|
Exoskeleton
|
|
November 24, 2016, 03:20:01 PM |
|
I wonder if Avalon would consider donating another few free miners for a giveaway again. I bet they can afford it and it might be nice to get a few more people back on this pool.
I wish they could also lower the price by even $100 per unit because at the current price Im not sure who will be buying any. Its just a little bit too expensive to make sense for me, as always. Maybe they will lower the price soon.
|
|
|
|
|
clgrissom3
Legendary
Offline
Activity: 1722
Merit: 1032
Carl, aka Sonny :)
|
|
November 24, 2016, 04:32:49 PM |
|
Haha! Does this remind anyone of anyone? I couldn't resist! It's time to roll out the blocks!  |
|
|
|
|
clgrissom3
Legendary
Offline
Activity: 1722
Merit: 1032
Carl, aka Sonny :)
|
|
November 24, 2016, 04:52:20 PM |
|
Block by Aminer with 54.67TH/s! This is his 2nd Kano block and our 2nd of the day! The Safari Kano with his bullwhip worked! |
|
|
|
|
edonkey
Legendary
Offline
Activity: 1150
Merit: 1004
|
|
November 24, 2016, 04:54:48 PM |
|
I wonder if Avalon would consider donating another few free miners for a giveaway again. I bet they can afford it and it might be nice to get a few more people back on this pool.
I wish they could also lower the price by even $100 per unit because at the current price Im not sure who will be buying any. Its just a little bit too expensive to make sense for me, as always. Maybe they will lower the price soon.
If they lowered the price and accepted BTC for payment, then I'd buy one too. |
Was I helpful? BTC: 3G1Ubof5u8K9iJkM8We2f3amYZgGVdvpHr
|
|
|
HagssFIN
Legendary
Offline
Activity: 2436
Merit: 1706
Electrical engineer. Mining since 2014.
|
|
November 24, 2016, 07:47:34 PM |
|
I wonder if Avalon would consider donating another few free miners for a giveaway again. I bet they can afford it and it might be nice to get a few more people back on this pool.
I wish they could also lower the price by even $100 per unit because at the current price Im not sure who will be buying any. Its just a little bit too expensive to make sense for me, as always. Maybe they will lower the price soon.
If they lowered the price and accepted BTC for payment, then I'd buy one too. Apparently they do accept BTC payment after all. They charge $25 to use BTC as a payment method.
https://bitcointalk.org/index.php?topic=1673843.msg16977145#msg16977145 |
|
|
|
41bja
Newbie
Offline
Activity: 15
Merit: 0
|
|
November 24, 2016, 07:50:24 PM |
|
I recently moved my AntMiners from one location to another, while they were mining on this pool. Upon moving them back to this location, the links to CKPool pool are now dead. I use the following stratum link: stratum+tcp://nonce.kano.is:27181
This is the recommended link for my device, although I have tried the other links to see if they would work as well. I'm uncertain of what to do in order to fix this.
|
|
|
|
|
|
