you can try

https://alloscomp.com/bitcoin/calculator

http://preev.com/

 fedex adds it no mater what then lies to you !!! . it won't mater the cost to them sadly .......  warning about them .

The other two sound about right .

Well put if they really cared etc wed have the chips by now it was one big troll , to sell to the rich or in a nicer word those who can afford it.

give awesome miner some time it's worth it and cost less then  CGWatcher and  CGremote did by far ,I used to support this as well , the DEV of awesome miner seems to be very active and on top of getting features added asap just have to ask for it .

I was one of the first to buy this i bought three and sold one , i use two right  now with the DPS 2000 watt PSU have been for months with out issue if im not mistaken it was designed for the Dps 2000 . i use both boards every day with out fail , planing to buy two more and try them out on the 2500 psu and 1600 psu sense one or two have .


this PSU

http://www.ebay.com/itm/IBM-BladeCenter-Delta-2000W-Power-Supply-Unit-DPS-2000BB-39Y7360-39Y7359-/381564359940

you asked it a scam is the point all ways has been and some here on the forums fell for it most kind of got there cash back thu because of how they paid.

https://www.facebook.com/MinersLab.is.a.Fraud/?fref=nf  aka also known as smart miners they finally got caught and shutdown it seems .

according to https://www.litecoinpool.org/calc


with out power usage applied


Expected Rewards
24 hours   11.79799805 LTC   47.59 USD
7 days   82.58598633 LTC   333.15 USD
30 days   353.93994141 LTC   1427.80 USD
Solo Mining Stats
Expected Time per Block   2 days 04 hours
Probability of a Block in 1 day   36.90%
Probability of a Block in 2 days   60.18%
Probability of a Block in 3 days   74.87%
Probability of a Block in 7 days   96.02%
Probability of a Block in 14 days   99.84%
Probability of a Block in 30 days   100.00%

I mine there all most every day .

hey  Phill  it been right for me and on the money i have got what the Expected Rewards rewards were :"). so far but that's with LTC i do all coins .

i run any were from 150 mh to 210 mh if i turn it all for a while. i buy eth with my ltc

my  Motherboard must have some kind of  safe mode built into it i couldn't  get it to stay on without a power switch which btw to op is a way safer way of turning it on or off . i did in fact try to short it being cheap it powered for 5 seconds then shut down so i bought a 4 dollar switch don't be cheap here it might turn out bad .'




https://www.amazon.com/gp/product/B00EDKN70S/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B00213KDQK/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B017F4N5Q4/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1


tip: if you have a old case laying around your not using take the switch out of it if it's not hardware wired in, if you don't want to buy a switch.

to be honest I'm amazed  you even see any hashing without a lot of rejects that counter it ( I'm not making fun or being rude either) ,


 in short no hash and no reward at all tiring it .

if you decide to, you can CPU mine ETH, and not just GPU mine ,  just have to look up how to  . .but do like they all say only do sha256 type coins with S9's or antminers  ): .

to be honest , i don't understand what you mean by this
You can confirm if it is a large coinbase causing the issue by trying to mine on P2Pool.  Their coinbase is WAY larger than Eligius's, since I've imposed a size limit on it to better facilitate miners with poor work generation speed.

if it hashes up to speed on Ant's pool or slush's pool which i thought had a bigger coinbase or maybe i don't understand the term bigger coinbase and i usually do, to me that means a large a mount of hashes on your pool, i Guess i just misunderstand that term and probable always have .

Luke
 i tried what you said and it didn't work, i still under hashes on this pool of all the pools i tired it's only on this one I'm not complaining , it doesn't matter thu I'm just waiting for this to go fully live and hope the hash rate goes back up for this pool that will be awesome to see again.

yea  ty for not taking script out of BFG and all im gonna say on that subject .

sorry it took so long getting back , i do other types of mining    and stuff with coins .

set your PC to

192.168.0.1

then go to your  Browner  

and type

192.168.0.100 with the PI on .

there software defaults to
192.168.0 not 192.168.1


if that fails burn the image to a SD again then try above .https://canaan.io/en/support/

I'M not sure just how to reset a Avalon miner other then do above there is no hardware reset i  ever found . if that helps keep the BTC . not needed
 

i would leave it as a static IP, make sure nothing else is using that IP on your network that way you all ways know were to look, to some thing like 192.168.1.200 or higher.

tip : you may get better help by moving your post here https://bitcointalk.org/index.php?board=40.0 and don't be alarmed if it gets moved by a admin  .

more like this one

http://www.ebay.com/itm/Zeus-X6-Thunder-18-20-mh-s-Scrypt-Miner-Dodge/201609419712?_trksid=p999999.c100623.m-1&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20160323102634%26meid%3D41111ee73ee143ab8376a30beed58607%26pid%3D100623%26rk%3D4%26rkt%3D6%26sd%3D172247561140


shipping thu the post office is 10 to 15 bucks cheaper and takes just as long unless you send it ground and ground cost more with the post office, they fit the large box for shipping with the post office just a tip .

power was around 550 to  600 each for the two i had at the time before i went back to BTC mining with S5s, now i do it all im still thinking of buying one, the price is right and the shipping wont be to bad.

hey forgot put up some Pictures are they red or black , color doesn't mater  performance wise just want a see one .

I did to at one time i had two sold them for 300 each made back then what they cost me when the S5 came out or around then when all the scrpt mining company's but one  turned out to be one big scam and they became thieves and the X6 is the later model same chip as the X3 .  all they did was under clock and under volts the X6 from a X3 it worked well before they started ripping others off with there so called 28 nm model that was suppose to top the A2 etc.

cool like i said whatever work , I'm not being rude by saying whatever works i don't mean it like some might take it . .


and the Avalon 4/4.1/6 is made for the Avalon your are right about that what i link is not and sold any place. so excuse me was offering feedback just being cool or trying if it's works yea .


cya


  

not asking to unmind you . whats wrong with  USB dongles if you using a hub , won't you need some kind usb plug on the end is my whole point. i use a hub with wires running to the hub from the miner is my point why i said any pi . so i hope it not just limited to one controller pi type then it's kind like bit main any way whatever comes I'll  adjust just adding feedback idc either way as long it does what it  suppose with less power and more hash and user friendly for every one and not hard to replace parts .

You can use any PI type if the software is written right i do it now with my Alchemist which comes with it own controller that is junk i use  rasp pi cubie boards orange pi etc or have tried them all they all  work with USB dongles the drivers are suppose to only work on  RPI but i knew different in most cases if it works on one it works on all of them if it's in USB dongle form these https://www.amazon.com/gp/product/B009T2ZR6W/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

 i know that's script it's just a example any miner can do it . just adding that thought . and 500 watts to 1300 for a btc miner sounds good.

for fan control http://www.ebay.com/itm/DC-12V-PWM-PC-CPU-Fan-Temperature-Control-Speed-Controller-CPU-High-Temp-Alarm-/181694032917?hash=item2a4dceec15:g:ffIAAOSwqu9VCZMW

i sent two to phillp to try he said in a round about way they work. how well no idea   just a idea to build from.

it's either this one
https://www.amazon.com/gp/product/B00CFP53XW/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

or this one
https://www.amazon.com/gp/product/B007O0EIRU/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

 also buy a cheap pdu http://www.ebay.com/itm/APC-AP7841-METERED-RACK-PDU-24-OUTLET-20-C13-4-C19-Power-distribution-strip-unit-/381505056743?hash=item58d3792fe7:g:uLgAAOSwFqJWhVeb

 your better off then tying to wire it into the wall you might even mess it up sense you have no idea were to get the power cord

.i don't know much about that PSU i can match one  with more power for less then pay what they want .  sense you say you are aware you need a  220/240 line the plugs are a lot different then a 110/120 line.