Hello patrike, I have a curious problem.
I have the AM installed on two PCs in two different locations. In one of them, the AM was corrupted in the update and I could not recover the settings, so I copied the configuration I had in one PC in another and then adapt it conveniently, since both PCs maintain different rigs and different VGA's.
The problem is that everything is fine except for a detail that can not be solved. I'll explain: I keep several previous versions of CriptoDredge because some algos go better with older versions. Logically they are configured as User defined custom software such that:
The issue is that I have these errors with any something when the miner starts in benchmark. If I start it in managed miner I do not have this problem. It only happens to me with the CriptoDredge and the installation of the software has been clean, directly from github. I also have this for the T-Rex but with T-rex all is fine and I do not have these problems. Do you know why this happens to me?
Regards
Hi Gordie, It doesn't just happens to you, I experienced the same on CD older versions (for the same reason as you, some algos works better, and some algos I'd like to keep using but removed from newest) as well. Manually running the miners are fine, but benchmarking is not possible as it errored out just like your screenshot. I found out the scenario where it's failing. If you define your own Managed Software and select CryptoDredge, Awesome Miner didn't understand that this CryptoDredge should have the same limitations on benchmarking as the predefined CryptoDredge. In the Benchmark dialog, you have a setting for "Benchmark without a pool (if supported)". This is not supported by CryptoDredge so in all cases when you benchmark CryptoDredge, Awesome Miner will pass a pool to be used. The bug: For a user defined Managed Software that is based on CryptoDredge, Awesome Miner didn't consider the benchmark limitations of CryptoDredge and tried to run it similar to how CcMiner do offline benchmarking without a pool. The result is that the benchmark failed, because CryptoDredge was missing the pool information. Workaround: Uncheck "Benchmark without a pool (if supported)" The next release of Awesome Miner will correct this scenario to make sure that even for user defined CryptoDredge software, Awesome Miner will always pass a pool and don't try offline benchmarking. Thanks for reporting the issue! |
|
|
|
Another Issue Report: Coin Properties -> Override global settings for exchange filters
sometimes does not work if coin is mapped to another algo in Options -> Statistics Providers -> Override coin algorithms
Workaround: To have the exchange filter working, you must filter the exchange before remapping the coin's algo
if anytime you want to change the filtered exchange individually for the coin, you need to remove the mapping -> filter the unmapped coin -> recreate the mapping example Strength Core - STR (Lyra2REv3) CoinToMine.Today list algorithm as lyra2v3
to have the coin information, I created algo lyra2v3 then once coin appears after updating from the API,
mapped the coin to Lyra2REv3 for consistency purposes, however, STR has ticker conflict with (bloody) Poloniex
who uses STR for Stellar instead of where everyone uses XLM....so went through a whole bunch of trial and error to find this minor issue and workaround
Today Awesome Miner first apply the exchange filtering and later on the algorithm modifications. It should really be the other way around. I will make this change in the next release. After upgrading to the next version, please note that for any coins that you manually mapped to a new algorithm, you may have to open the Coin Properties and redefine the Exchange Filter. |
|
|
|
Awesome Miner version 6.2.7
GPU mining
- Added CryptoNight Turtle algorithm
Features
- Added Notes field to Coin Properties
Integration
- Nicehash CryptoNightV4 (CryptoNightR) pool added
- Improved SrbMiner support to allow customization of algorithm to support via the Managed Software configuration
User interface
- Coins can be hidden via the context menu on the Coins tab
- Coin list in Pool Properties will not include disabled algorithms
- Mining pools using a specific coin can be accessed via the context meny on the Coins tab
Mining softare
- TeamRedMiner 0.4.1
- BMiner 15.3.1
- TT-Miner 2.1.16
Corrections
- Correction to pool balance for pools added using the Predefined Pools concept
- Correction to tar.gz-file extract function on Linux
Hi Patrike, Thank you for the quick implementation for the UI improvements, it's greatly appreciated! small issue though, can we also have the right click menu for coins that are in the AM's DB but no stats from API provider? To elaborate, right now the context menu only works if the coin has information retrieved from API (block time, reward, height, nethash...etc) the coins that were created and set in options as not to delete when they are not in the API any more still shows in the coins list (only visible columns -> Coin, Algorithm) and in this case, I'd love to hide them but they will not have the context menu available when RMB clicked on. Scenario Example: GinCoin (GIN)
Original Algo -> Lyra2z
New Algo -> X16rt
cannot hide GIN:Lyra2z without going through Options since cannot activate context menu or have alternative button action to achieve result
Best Regards, Thanks for the feedback. I will make a change for this in the next release. Right now the "Hide" menu item is disabled if no coin stats are found, but simply leaving it enabled in that case will resolve the scenario. |
|
|
|
Well, I'm the man with the suggestions.
There is a situation that I can not avoid, I give you a REAL example so that you understand it and see if the suggestion is interesting or not.
There are coins that have little hash, are in their final phase or are coins that are only profitable up to a certain hash. The real example would be Xfox or AZART. I have them added and I have even measured the profit, but what happens to me is that when it enters into auto profit and the currency is the first one in profits, all my rigs enter at the same time. But when they all enter, the profit goes down so much that it stops being profitable, and that soon causes a change. Then again AZART becomes profitable again, and everything goes into the auto profit mode, and again the profir falls because it is too much hash.
The suggestion would be, when defining the pool of the currency, that there would be a field that tells AM how many maximum rigs can be in that currency. For example AZART I would put 2, therefore only 2 rigs would enter to mine that currency, the rest would not enter. If I left it blank, it would behave as usual.
When we play with shitcoins this happens many times, I enter and cause the fall of profit, because everything comes in. Being able to specify the maximum number of RIGS (any of which I have), that would give me more control when mining these small coins and not cause the profit myself and also cause excessive changes.
It can be done by creating different groups pools assigned to each rig, but that would make the management of AM more difficult and more difficult. I hope you like the suggestion that comes in handy to mine these coins that are in their final phase or that give few rewards and when a hash is exceeded, they stop being profitable. Is that right now the only thing I do is disable them, but I would like to control it with an option like the one I have indicated.
I do not know if the rules could do the same, I looked and I think not.
I hope you understand and I hope you consider it.
Thanks for the suggestion. What would be nice as well is if the profit switcher looks at the Network Hashrate for a coin and compare it with your hashpower. If it's a very small coin and you have a significant number of miners, your combined hashrate will have a real impact on the coin difficulty. However, I think this will have to be a more long term item as it also will require some design changes. |
|
|
|
Hello Patrike, I make some suggestions that would be very useful for me and other people, are reminders of others I have done.
You could put in TAB COINS, which has a field of notes .. OSea to avoid having to go to optios> search pool> see notes. They can be independent notes, that is, in the currency pool, a note, and in TAB COIN another. It is that if not, there are many clicks to look for information, for example, indicate that it has no volume, the exchange does not work and any note that I add from the currency research. Double click on the coin in COIN TAB and below the Exchanges selection a simple form where you can add that note. So it would be easy to consult because I do not have it active. As indicated, it may be a different note to that added in the currency pool. Being different there are no problems
In the Miners tab, we can mark the miners with some colors already established, red, green, yellow etc ... That is useful for when you have hundreds of rigs or equipment. But I would like an equal system in the coins tab. For example, I can mark in Green the coins that work for me, red ones that do not have exchanges or are bad exchages, yellow ones that are in Fork, blue ones that I have not yet reviewed and have come out the top.
The problem is, it is very frequent that I look at the same coin two or more times in one or two weeks, because as I can not leave notes, nor can I put the row of that coin of a color, it makes me repeat searches for information. A selector to put color to the rows, by default all white. But so I can mark in a color those that have some problem, and then double click on coins, see the note I made.
For me, the management of the coins is very important, and I do not waste my time reviewing it because I do not remember that I reviewed it days ago, because I am always reviewing coins. I've even been waiting for a certain currency to have more exchanges etc. That could do it very well with colors, with 6 or 7 it would be very good, just like it is in Miners.
If it does not fit, because you have the links to the calculators, those 4 links can be put only in a drop-down option, and leave space to assign colors to the coins. That would greatly facilitate my daily work. If I see that X coins are in the color that they lack a good exchange, I know that those coins of that color I have to check them every X days to see if they have new exchanges. If I mark a coin that is faulty, I know that over time I have to review it and if they do not fix it, I will remove it from the list. I can even mark in a certain color coins that have appeared on the top of Profit and know that I have to look for info of those coins, but I can do it another day or another time, but I know that I have X color waiting for check.
Thanks for the detailed suggestions, I've already made a few notes based on this. The coloring of Coins would make sense. About the Notes - and this relates to a previous discussion about how pools are linked to a coin but not the other way around - what I've been thinking of doing is to add an easier way to edit a pool based on the selected coin on the Coins tab. If you right click on XMR in the Coin list, you would get a list of the pools using XMR, and clicking on any of these entries would open the Edit dialog for the selected pool. This supports the scenario where multiple pools reference the same coin as well. thanks for thinking about the colors. Forget the notes of pools and tabs coins. They would not be the same. The pool notes of a coin, will only be there, and serves to put observations on the pool or whatever. And then other NOTES completely separated, in Coins Tabs. So without leaving coins tab I can put a note and a color. And even the suggestion of moopido to be able to hide a coin from the contextual menu of Coins, would be another good help. There that recoil the clicks. I hope you understand now, that we can have two separate and separate notes, those that already exist in the currency pool, and another that will only exist in each currency in the COINS tab. Being able to write and read without getting out of there, and being able to color would give me a greater control and I did not pass the search for a coin several times in a period of time Please check out the new version and let me know your feedback. I do think it addresses a few of your points. The suggestion about coloring is noted, but will have to be prioritized among other requirements as well. |
|
|
|
|
Awesome Miner version 6.2.7
GPU mining
- Added CryptoNight Turtle algorithm
Features
- Added Notes field to Coin Properties
Integration
- Nicehash CryptoNightV4 (CryptoNightR) pool added
- Improved SrbMiner support to allow customization of algorithm to support via the Managed Software configuration
User interface
- Coins can be hidden via the context menu on the Coins tab
- Coin list in Pool Properties will not include disabled algorithms
- Mining pools using a specific coin can be accessed via the context meny on the Coins tab
Mining softare
- TeamRedMiner 0.4.1
- BMiner 15.3.1
- TT-Miner 2.1.16
Corrections
- Correction to pool balance for pools added using the Predefined Pools concept
- Correction to tar.gz-file extract function on Linux
|
|
|
|
PROFIT DISPLAY
Any way to display Profit in USD and BTC? With atleast 5 decimal points on the BTC.
Maybe this is already possible I looked but only saw the ability to change to BTC exclusively.
Thanks
I've had similar requests earlier and I understand your requirement. Right now you can select USD or BTC like you noticed, but not both at the same time. Is it mainly on the Dashboard or in the Miners list you wanted both to be displayed? It's also a matter of screen space. |
|
|
|
Small Requests:
1.
When setting up pools, the Pool Properties -> Optional settings -> Coin:
Dropdown list
can it be filtered so that coins on inactive algos as specified in Options -> Algorithms don't show in the list?
2.
In coins tab, can we integrate "Remove/Hide Coin" option in the right click contextual menu so we don't need to manually hide them in Options -> Coins this especially is a nuisance when coins forked (causing stats provider information conflict creating duplicate coins) and the current hiding mechanism doesn't tell you which algo of the coin you are hiding, often takes a few tries to get the right one off the coins tab.
YESS , good suggestions +1 Being able to add and view the notes from the coins tab would save a lot of time. Thanks for the feedback. The new concept of accessing the Edit Pool Properties dialog from the right-click menu of a coin that I'm planning to implement should at least improve this scenario a bit. |
|
|
|
Small Requests:
1.
When setting up pools, the Pool Properties -> Optional settings -> Coin:
Dropdown list
can it be filtered so that coins on inactive algos as specified in Options -> Algorithms don't show in the list?
2.
In coins tab, can we integrate "Remove/Hide Coin" option in the right click contextual menu so we don't need to manually hide them in Options -> Coins this especially is a nuisance when coins forked (causing stats provider information conflict creating duplicate coins) and the current hiding mechanism doesn't tell you which algo of the coin you are hiding, often takes a few tries to get the right one off the coins tab.
YESS , good suggestions +1 I've implemented these two suggestions already and they will be part of the next release. |
|
|
|
Hello Patrike, I make some suggestions that would be very useful for me and other people, are reminders of others I have done.
You could put in TAB COINS, which has a field of notes .. OSea to avoid having to go to optios> search pool> see notes. They can be independent notes, that is, in the currency pool, a note, and in TAB COIN another. It is that if not, there are many clicks to look for information, for example, indicate that it has no volume, the exchange does not work and any note that I add from the currency research. Double click on the coin in COIN TAB and below the Exchanges selection a simple form where you can add that note. So it would be easy to consult because I do not have it active. As indicated, it may be a different note to that added in the currency pool. Being different there are no problems
In the Miners tab, we can mark the miners with some colors already established, red, green, yellow etc ... That is useful for when you have hundreds of rigs or equipment. But I would like an equal system in the coins tab. For example, I can mark in Green the coins that work for me, red ones that do not have exchanges or are bad exchages, yellow ones that are in Fork, blue ones that I have not yet reviewed and have come out the top.
The problem is, it is very frequent that I look at the same coin two or more times in one or two weeks, because as I can not leave notes, nor can I put the row of that coin of a color, it makes me repeat searches for information. A selector to put color to the rows, by default all white. But so I can mark in a color those that have some problem, and then double click on coins, see the note I made.
For me, the management of the coins is very important, and I do not waste my time reviewing it because I do not remember that I reviewed it days ago, because I am always reviewing coins. I've even been waiting for a certain currency to have more exchanges etc. That could do it very well with colors, with 6 or 7 it would be very good, just like it is in Miners.
If it does not fit, because you have the links to the calculators, those 4 links can be put only in a drop-down option, and leave space to assign colors to the coins. That would greatly facilitate my daily work. If I see that X coins are in the color that they lack a good exchange, I know that those coins of that color I have to check them every X days to see if they have new exchanges. If I mark a coin that is faulty, I know that over time I have to review it and if they do not fix it, I will remove it from the list. I can even mark in a certain color coins that have appeared on the top of Profit and know that I have to look for info of those coins, but I can do it another day or another time, but I know that I have X color waiting for check.
Thanks for the detailed suggestions, I've already made a few notes based on this. The coloring of Coins would make sense. About the Notes - and this relates to a previous discussion about how pools are linked to a coin but not the other way around - what I've been thinking of doing is to add an easier way to edit a pool based on the selected coin on the Coins tab. If you right click on XMR in the Coin list, you would get a list of the pools using XMR, and clicking on any of these entries would open the Edit dialog for the selected pool. This supports the scenario where multiple pools reference the same coin as well. |
|
|
|
TT-Miner 2.1.15 Nvidia GPU Miner With Improved MTP Support and Performance
eam Red Miner 0.4.1 With Support for CryptoNight R (CNv4)
Nanominer 1.1.0 by Nanopool With Support for CryptoNight R on Nvidia GPUs
Thanks for the suggestions. I've looked at bit at Nanominer so far and I'm planning to add support for it in the near future |
|
|
|
can you update turtlecoin to the new fork to cnturtle pleasE?
I will include it by default for SrbMiner and XMRig in the next release. |
|
|
|
Small Requests:
1.
When setting up pools, the Pool Properties -> Optional settings -> Coin:
Dropdown list
can it be filtered so that coins on inactive algos as specified in Options -> Algorithms don't show in the list?
2.
In coins tab, can we integrate "Remove/Hide Coin" option in the right click contextual menu so we don't need to manually hide them in Options -> Coins this especially is a nuisance when coins forked (causing stats provider information conflict creating duplicate coins) and the current hiding mechanism doesn't tell you which algo of the coin you are hiding, often takes a few tries to get the right one off the coins tab.
Good points. I agree that this will improve the usability. These changes are small so they can be included in one of the next few releases. |
|
|
|
Hi Patrike, Bit of an issue trying to achieve the following on Managed Profit MinersGoal: Switch Pool Groups for x hours every day then back to default Pool Groups Procedure: 1. Setup Rule with Time Trigger to trigger at certain hour of the day
2. Rule Action -> Miner Command -> Change group pool -> Selects desired pool group Result: The action did nothing on the miners, the profit switcher still considers all settings that are under Options -> Profit Switching and thus, no effect. The Change Group Pool feature is currently only for change of the active pools on External Miners and Managed Miners. It will not affect the pools considered by the profit switcher. I do have a custom script where you manually can override the profit switching pools for a Profit Profile and I'm also planning to integrate that into a new action. |
|
|
|
|
Awesome Miner version 6.2.6
ASIC mining
- Save the pools currently active on the Pools tab as Default Pools on the ASIC miner
- Improved compatibility for setting Default Pools and API Access on Antminers
GPU mining
- Monero (XMR) is now listed as CryptoNightV4 (CryptoNightR).
Mining softare
- GMiner 1.35
- TeamRedMiner 0.4
- BMiner 15.3
Corrections
- Correction to a scenario where benchmark results for non-best software could be lost
|
|
|
|
Also regarding Monero, it's still listed as V8 and my profit is showing $0.00. Can I fix that or do I have to wait for next update?
There will be a new release in just a moment that map Monero to CryptoNightV4 (R). |
|
|
|
any idea how to get teamredminer to use --algo cnr instead of cnv8?
tried Command Line Parameter -- but didnt work
You can go to the Options dialog, Managed Software section, and modify the entry for TeamRedMiner. Awesome Miner uses the name "CryptoNight V4" for the new Monero fork. You can enable this line and put the User Defined Command Line "cnr" here. If you have a coin with the algorithm CryptoNightV4, Awesome Miner will then launch TeamRedMiner with "cnr" The next release of Awesome Miner will include the latest TeamRedMiner with CryptonightV4 (cnr) suppot enabled by default. |
|
|
|
Hi patrike, When updating to the new version, all the benchmarks have been deleted. Only the best benchmark of each algo has been saved  That doesn't sounds good - I will investigate this. Thanks for letting me know. Anyone else experienced the same issue? Havn't seen this myself. Could it be that an old config/backup has been restored if the config.xml file is barfed - e.g. after a crash? Would this be written to the log with the default settings? Same here, on multiple RIGs.. :/ I found the issue related to the benchmark and it will be corrected in the next release. Thanks for the reporting the problem. |
|
|
|
Hi Patrike, I'm sure you covered this multiple times before, but is there another (cleaner) way to tell AM to use a different Algo? For instance, Masari is using CryptoNight Fast2, but AM tells it to use CryptoNight Fast. I got it to work by changing the Coin in Pool Properties from "Masari" to "Unspecified CryptoNight Fast2", but this obviously is a work around.
I suppose this is a case of where the coin recently forked ot another algorithm? Awesome Miner gets all coin information, including which algorithm it's based on, via the coin statitics providers like WhatToMine.com and CoinCalculators.io. In case a coin changes the algorithm, it may take some time before these providers changes the algorithm. Awesome Miner can override the algorithm for a coin via the Options dialog, Statistics Providers section, where the setting Override coin algorithm can be used to specify that a specific coin should be using another algorithm. |
|
|
|
Hi patrike, When updating to the new version, all the benchmarks have been deleted. Only the best benchmark of each algo has been saved That doesn't sounds good - I will investigate this. Thanks for letting me know. Anyone else experienced the same issue? |
|
|
|
|
Show Posts
