Bottlecaps pool now online running latest wallet: http://cap.pool.mineabit.comProp payment system, 2% fee and 0.001 tx fee Payouts tested and working to Cryptsy well - Ive got wallet v2.0.0.0 and my deposit to cryptsy is not working,. I've got a support ticket open too and they sais they had to escalate the problem - so my experience is not the same as yours. |
|
|
|
this is really getting rediculous I had to reboot the pi machine 4 times today to get it our of slow mode. this machine should have been tested more before it was shipped. I am really unhappy. this is really impressive performance from a so called 25 mh miner. NOT! pi@hashracontroller:~$ sudo screen -x SCRYPT
(5s):25.54M (avg):4.035Mh/s | A:183 R:5 HW:12 U:182.9/m WU:6381.4/m (5s):9.377M (avg):3.668Mh/s | A:196 R:6 HW:13 U:178.1/m WU:6237.0/m (5s):3.442M (avg):3.362Mh/s | A:213 R:6 HW:17 U:177.4/m WU:6276.5/m (5s):1.263M (avg):3.103Mh/s | A:233 R:6 HW:18 U:179.1/m WU:6310.4/m (5s):463.9K (avg):2.881Mh/s | A:247 R:8 HW:21 U:176.3/m WU:6293.9/m (5s):170.3K (avg):2.689Mh/s | A:268 R:8 HW:23 U:178.6/m WU:6364.9/m (5s):18.19M (avg):4.311Mh/s | A:287 R:8 HW:24 U:179.3/m WU:6506.9/m (5s):6.677M (avg):4.058Mh/s | A:305 R:8 HW:25 U:179.3/m WU:6876.8/m (5s):2.451M (avg):3.832Mh/s | A:319 R:8 HW:26 U:177.1/m WU:6992.4/m (5s):899.9K (avg):3.631Mh/s | A:336 R:8 HW:27 U:176.8/m WU:7264.2/m (5s):330.3K (avg):3.449Mh/s | A:355 R:9 HW:27 U:177.4/m WU:7508.7/m
|
|
|
|
I did upgrade one of my two units last night and it's been running fine but I did have to reboot it after upgrading
ok, cool. was there any performance or stability boost do you think? my only observation(and this has not been proven with multiple tests) is that the unit did not need to be restarted multiple times after changing pools, like I've experienced with the stock firmware. oh and even though it reboots itself after the update - I neede to reboot it a second time because after it's own reboot all I say was this in the syslog file: Jun 12 14:18:54 hashracontroller cgminer: Started cgminer 3.1.1
Jun 12 14:18:59 hashracontroller single_ltc_monitor[2201]: Started LTC PRocess waiting 10 seconds to boot cgminer
Jun 12 14:18:59 hashracontroller single_ltc_monitor[2201]: socket connect(127.0.0.1,4001) failed returning null
Jun 12 14:18:59 hashracontroller cgminer: Icarus Detect: Test failed at /dev/ttyUSB0: get 00000000, should: 00038d26
Jun 12 14:18:59 hashracontroller cgminer: All devices disabled, cannot mine!
Jun 12 14:19:04 hashracontroller single_ltc_monitor[2201]: socket connect(127.0.0.1,4001) failed returning null
Jun 12 14:19:09 hashracontroller single_ltc_monitor[2201]: socket connect(127.0.0.1,4001) failed returning null
Jun 12 14:19:14 hashracontroller single_ltc_monitor[2201]: socket connect(127.0.0.1,4001) failed returning null
Jun 12 14:19:19 hashracontroller single_ltc_monitor[2201]: socket connect(127.0.0.1,4001) failed returning null
Jun 12 14:19:24 hashracontroller single_ltc_monitor[2201]: socket connect(127.0.0.1,4001) failed returning null
Jun 12 14:19:29 hashracontroller single_ltc_monitor[2201]: socket connect(127.0.0.1,4001) failed returning null
Jun 12 14:19:34 hashracontroller single_ltc_monitor[2201]: socket connect(127.0.0.1,4001) failed returning null
Jun 12 14:19:39 hashracontroller single_ltc_monitor[2201]: socket connect(127.0.0.1,4001) failed returning null
Jun 12 14:19:44 hashracontroller single_ltc_monitor[2201]: socket connect(127.0.0.1,4001) failed returning null
Jun 12 14:19:49 hashracontroller single_ltc_monitor[2201]: socket connect(127.0.0.1,4001) failed returning null
Jeff The trick for rebooting is, first reboot the miner, and then reboot the pi. The miner has to be reset completely and alive, before connecting the pi to it. thanks for the insight but how do you do that when your miners are remote - is there a command at the firmware level to reboot the miner? |
|
|
|
|
fyi: deposits to cryptsy appear to be broken.
|
|
|
|
I did upgrade one of my two units last night and it's been running fine but I did have to reboot it after upgrading
ok, cool. was there any performance or stability boost do you think? my only observation(and this has not been proven with multiple tests) is that the unit did not need to be restarted multiple times after changing pools, like I've experienced with the stock firmware. oh and even though it reboots itself after the update - I neede to reboot it a second time because after it's own reboot all I say was this in the syslog file: Jun 12 14:18:54 hashracontroller cgminer: Started cgminer 3.1.1
Jun 12 14:18:59 hashracontroller single_ltc_monitor[2201]: Started LTC PRocess waiting 10 seconds to boot cgminer
Jun 12 14:18:59 hashracontroller single_ltc_monitor[2201]: socket connect(127.0.0.1,4001) failed returning null
Jun 12 14:18:59 hashracontroller cgminer: Icarus Detect: Test failed at /dev/ttyUSB0: get 00000000, should: 00038d26
Jun 12 14:18:59 hashracontroller cgminer: All devices disabled, cannot mine!
Jun 12 14:19:04 hashracontroller single_ltc_monitor[2201]: socket connect(127.0.0.1,4001) failed returning null
Jun 12 14:19:09 hashracontroller single_ltc_monitor[2201]: socket connect(127.0.0.1,4001) failed returning null
Jun 12 14:19:14 hashracontroller single_ltc_monitor[2201]: socket connect(127.0.0.1,4001) failed returning null
Jun 12 14:19:19 hashracontroller single_ltc_monitor[2201]: socket connect(127.0.0.1,4001) failed returning null
Jun 12 14:19:24 hashracontroller single_ltc_monitor[2201]: socket connect(127.0.0.1,4001) failed returning null
Jun 12 14:19:29 hashracontroller single_ltc_monitor[2201]: socket connect(127.0.0.1,4001) failed returning null
Jun 12 14:19:34 hashracontroller single_ltc_monitor[2201]: socket connect(127.0.0.1,4001) failed returning null
Jun 12 14:19:39 hashracontroller single_ltc_monitor[2201]: socket connect(127.0.0.1,4001) failed returning null
Jun 12 14:19:44 hashracontroller single_ltc_monitor[2201]: socket connect(127.0.0.1,4001) failed returning null
Jun 12 14:19:49 hashracontroller single_ltc_monitor[2201]: socket connect(127.0.0.1,4001) failed returning null
Jeff |
|
|
|
|
I did upgrade one of my two units last night and it's been running fine but I did have to reboot it after upgrading
|
|
|
|
Great thread..a few comments... My 14M/H unit arrived promptly, direct from China pretty much when Hashra said it would be released. Comms really good all the way. Dodgy USB PI power cable, as reported - use a spare USB phone adapter. There was NO import tax to pay (to UK) in this instance. Unit shipped as a sample. A few people complaining about the price $/MH for these units. Mmmmhh.... 4 x R9 280x @ 3.2M/H @ 1100W (plus PC hardware and loads of heat and noise) OR 1 x Lunar Launcher @ 14M/H @ 450W (plus PSU and even more noise  ) Yes I know some of these figures might not be exact, and yes R9 280xs have come down in price, but you get my drift ? I'm a very happy customer, pleased I made the shift. GPU's all being sold off Only issue will be if this unit dies after 90 days... I sold off all of my gpu's on craigslists a few weeks ago. these are very fickle units - I often find myself having to restart my Landers a few times before they want to run at speed. it's as if all the chip don;t want to join the party. they are lot of contortions going on behind the scenes with waits, timeouts, restarts etc in the controla software to get the units to cooperate - much much different than press a button and mine with the gridseeds, I'm used to. I know I've loooed at the code and the scripts in the controla software. one thing is for sure - we need a more stable version of the firmware that runs these things... I've got a lot of documentation showing how once these things in 'slow mode' they never recover and needs multiple restarts to get going and sometimes a reboot and I'm certainly not down on power - both of my units are being off gold 1,200 psu's. |
|
|
|
yes and be prepared to have the prices cut on hashra units after you've made payment and even before your equipment arrives.
we have refunded the difference to our customers... or they were egliable to upgrade to a bigger machine with a better price. that's very nice of you - too bad Hashra has not to the people who pre-ordered and invested in the company - to date we've received NOTHING!!! NOTHING!!!!
|
|
|
|
Hiya,
It is listed as 14MH+ but under specs, It is listed as 12MH+
Can you tell us which speed it is rated at please?
it's really 14 mh |
|
|
|
I've had a large machine down going on 7 hours now. I've sent 3 emails, called and even sent a PM to their CEO and no response yet  ? |
|
|
|
Are these magic mushrooms?  These are not magic mushrooms, they are beneficial to your health Aren't magic mushrooms also beneficial to your health? It's just the way you look at it I guess. yes - they relieve stress - we used to pick them in the cow pastures of Samsula Florida man years ago and boil them, then drink the juice (it was horrible tasting) but tequila made it taste better. |
|
|
|
I've placed a number of orders with these guys and never had any problems at all. They always responded to my messages right away, and every thing I ordered got to me sooner then they said it would. I don't do all my purchases there because they don't always have everything I want, but I always check them first just because I trust them to actually deliver what they promise, when they promise. That's been my experience anyway.
the worst that's happened to me is that orders did not arrive when promised and Michael refunded me shipping costs |
|
|
|
I've seen some of his last works, I believe. He is a really good designer, would recommend.  Thanks you. I don't mean to be rude, but all you have it a bunch of non coin related graphics, if I were trying to get business from coin developers I'd show a sample coin design...
just a recommendation
Look at my designs above, do you think it will be hard to make a circle? who knows - I can do what you've done above but I would not try to tackle a coin face with he proper lighting effect, 3d, surface grooves, edges, design, etc... seems to me like you're either unwilling or unable - I personally thought it was a simple request but for some reason you're taking offense to the request. No need to get so defensive. I have 3d modeling tools, photoshop etc... but it takes a certain skill to create a very nice looking coin I'll tell you what - I'll make it easy for you - just tell me what coins you've created and I'll go look at them. I would not ask if I wasn't interested because i'm working with a few others on a coin right now. |
|
|
|
|
does anyone besides find find their Lander incredibly slow coming up to speed on the screen?
it seems like it often takes 10 to 15 minutes for the Controla screen to display information accurately.
some times it never seems to come up to speed and I have to 'restart' (not reboot) it multiple times to get it to report hash rates properly - it's very annoying.
|
|
|
|
Just made full ROI today on my 2 machines in 23 days..
So to all the haters, i love you LightningAsic..
(btw i ordered 1x90MH/ 1x75MH miner)
EDIT: This was lots of work, and mining coins that gained lots of value / market manipulation
BOOYAH! |
|
|
|
my bad - you are correct - nothing comes with the unit. I printed them from their support page when I got mine. |
|
|
|
|
I would echo philipma1957's opinions.
I have purchased from Zoomhash multiple times and they've always been very responsive.
If the need arose - I would purchase them again if they had the best price.
|
|
|
|
|
I don't mean to be rude, but all you have it a bunch of non coin related graphics, if I were trying to get business from coin developers I'd show a sample coin design...
just a recommendation
|
|
|
|
|
darn - a multipool just showed up with 500MH
how about a fork with digishield and kgw?
|
|
|
|
|
Show Posts
