Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[jang430]

Does v10 support ETH and ZCash Dual mine?  Under Windows.  Also, I have a mixture of 5 GTX 1070s, and 6 RX 580s.

[1714240618]

1714240618

[1714240618]

1714240618

[1714240618]

1714240618

[1714240618]

1714240618

[Demarsac]

Does v10 support ETH and ZCash Dual mine?  Under Windows.  Also, I have a mixture of 5 GTX 1070s, and 6 RX 580s.

No

These 2 cannot be combined for dual mining

[Didldak]

Confirming the overclock issue. Got six values for OC in config.txt. During the first time run of CM miner, only 1st GPU get's OC'ed. When I close and reopen the miner, everything works fine.

[DONcoinDEV]

i just installed windows 7 64 bit
when i click on .bat file EthDcrMiner64.exe has stopped working..
even i am facing this same error on all miners..

but in another partition of SSD's windos 10 64 miner working fine..

i have another problem in windows 7 64 bit out of 5 GPUs 1 GPU showing yellow and  4 GPUs showing correct.

how to fix this 2 probles?

[SummersideGuy]

i just installed windows 7 64 bit
when i click on .bat file EthDcrMiner64.exe has stopped working..
even i am facing this same error on all miners..

but in another partition of SSD's windos 10 64 miner working fine..

i have another problem in windows 7 64 bit out of 5 GPUs 1 GPU showing yellow and  4 GPUs showing correct.

how to fix this 2 probles?

Windows 7 does not work with Claymore + Blockchain drivers

[el.list.jt]

Hello i need help with using Claymore miner i'm currently using 1 EVGA GEFORCE GTX 1060 and 3 RX 580 Red Dragon PowerColor. It was mining good yesterday it was generating 25/Mhs per the red dragon and 15/Mhs for the EVGA. I have the ASRock Pro 110 BTC motherboard which supports up to 13/GPU. I was using Jaxx as a wallet but i'm going to be switching to Exodus which i read was alot better. Please help me with the directions or what i need to do to make this mine again or any other way. I was mining ETH not classic. In red it shows

ETH: Share Rejected!
Socket was closed remotely (by pool)
ETH Job Timeout, disconnect, retry in 20 sec...

and it keeps on repeating itselft.

It says the pool i was connected to is cn1.ethermine.org:14444

I don't see a "cn1" server on the Ethmine pool for ETH or ETC, only for Zcash and the config for that is "cn1-zcash.flypool.org:3333".
For ETH it would be, for example, "eu1.ethermine.org:4444", or "asia1.ethermine.org:4444"
If you post your full Claymore config we may be able to help more.

Please see the information below. The only thing i updated was the wallet address and my name. Thanks
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal 0xef830d6772ece5c5dbc55d7469e526a8376e8d03/Elito/YOUR_EMAIL -epsw x -mode 1 -ftime 10

Please let me know what is the best mining software to use with the current rig that i have in place. Thanks

[DONcoinDEV]

i just installed windows 7 64 bit
when i click on .bat file EthDcrMiner64.exe has stopped working..
even i am facing this same error on all miners..

but in another partition of SSD's windos 10 64 miner working fine..

i have another problem in windows 7 64 bit out of 5 GPUs 1 GPU showing yellow and  4 GPUs showing correct.

how to fix this 2 probles?

Windows 7 does not work with Claymore + Blockchain drivers

so which driver is good for windows 7 64 bit?

and if i install new drivers will my 5th GPU will detect ?

[B{_}rg1]

when i mine only ETC i get 26mh/s single rx 470

if dual mine etc+dcr only 20 for ETC and 600 in DCR

is that normal

You can adjust the secondary coin intensity with the +/- keys while dual mining. Once you find the best intensity that maximizes the hash rate of the second coin without lowering the ETH hash rate, you can set it in your command line or configuration file with the -dcri parameter.

My RX 470 Shappire Nitro Plus 8GB reaches 28.8~29 MH/s on ETH (-dcri 23)

u mean like this

EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool stratum+tcp://yiimp.ccminer.org:3252 -dwal DsUt9QagrYLvSkJHXCvhfiZHKafVtzd7Sq4 -dpsw x -dcri 23

Hi, could you provide some help in how to exactly configure the config file for mining ETC + DCR with ethermine pool??
I get always rejected from the poolside and use the same lines as it would be ETH but changing it for the etc pool.

EthDcrMiner64.exe -epool eu1-etc.ethermine.org:4444 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -asm 1 -dpool stratum+tcp://yiimp.ccminer.org:3252 -dwal DsUt9QagrYLvSkJHXCvhfiZHKafVtzd7Sq4 -dpsw x

Thank you very much!!

[DONcoinDEV]

when i mine only ETC i get 26mh/s single rx 470

if dual mine etc+dcr only 20 for ETC and 600 in DCR

is that normal

You can adjust the secondary coin intensity with the +/- keys while dual mining. Once you find the best intensity that maximizes the hash rate of the second coin without lowering the ETH hash rate, you can set it in your command line or configuration file with the -dcri parameter.

My RX 470 Shappire Nitro Plus 8GB reaches 28.8~29 MH/s on ETH (-dcri 23)

u mean like this

EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool stratum+tcp://yiimp.ccminer.org:3252 -dwal DsUt9QagrYLvSkJHXCvhfiZHKafVtzd7Sq4 -dpsw x -dcri 23

Hi, could you provide some help in how to exactly configure the config file for mining ETC + DCR with ethermine pool??
I get always rejected from the poolside and use the same lines as it would be ETH but changing it for the etc pool.

EthDcrMiner64.exe -epool eu1-etc.ethermine.org:4444 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -asm 1 -dpool stratum+tcp://yiimp.ccminer.org:3252 -dwal DsUt9QagrYLvSkJHXCvhfiZHKafVtzd7Sq4 -dpsw x

Thank you very much!!

just use this code and replace ur wallet

EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool stratum+tcp://yiimp.ccminer.org:3252 -dwal DsUt9QagrYLvSkJHXCvhfiZHKafVtzd7Sq4 -dpsw x -dcri 23

[B{_}rg1]

when i mine only ETC i get 26mh/s single rx 470

if dual mine etc+dcr only 20 for ETC and 600 in DCR

is that normal

You can adjust the secondary coin intensity with the +/- keys while dual mining. Once you find the best intensity that maximizes the hash rate of the second coin without lowering the ETH hash rate, you can set it in your command line or configuration file with the -dcri parameter.

My RX 470 Shappire Nitro Plus 8GB reaches 28.8~29 MH/s on ETH (-dcri 23)

u mean like this

EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool stratum+tcp://yiimp.ccminer.org:3252 -dwal DsUt9QagrYLvSkJHXCvhfiZHKafVtzd7Sq4 -dpsw x -dcri 23

Hi, could you provide some help in how to exactly configure the config file for mining ETC + DCR with ethermine pool??
I get always rejected from the poolside and use the same lines as it would be ETH but changing it for the etc pool.

EthDcrMiner64.exe -epool eu1-etc.ethermine.org:4444 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -asm 1 -dpool stratum+tcp://yiimp.ccminer.org:3252 -dwal DsUt9QagrYLvSkJHXCvhfiZHKafVtzd7Sq4 -dpsw x

Thank you very much!!

just use this code and replace ur wallet

EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool stratum+tcp://yiimp.ccminer.org:3252 -dwal DsUt9QagrYLvSkJHXCvhfiZHKafVtzd7Sq4 -dpsw x -dcri 23

your code is first of all for ethpool, which is for ETH not ETC!

I want to dual mine ETC + DCR on etc.ethermine and yiimp.

[DONcoinDEV]

when i mine only ETC i get 26mh/s single rx 470

if dual mine etc+dcr only 20 for ETC and 600 in DCR

is that normal

You can adjust the secondary coin intensity with the +/- keys while dual mining. Once you find the best intensity that maximizes the hash rate of the second coin without lowering the ETH hash rate, you can set it in your command line or configuration file with the -dcri parameter.

My RX 470 Shappire Nitro Plus 8GB reaches 28.8~29 MH/s on ETH (-dcri 23)

u mean like this

EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool stratum+tcp://yiimp.ccminer.org:3252 -dwal DsUt9QagrYLvSkJHXCvhfiZHKafVtzd7Sq4 -dpsw x -dcri 23

Hi, could you provide some help in how to exactly configure the config file for mining ETC + DCR with ethermine pool??
I get always rejected from the poolside and use the same lines as it would be ETH but changing it for the etc pool.

EthDcrMiner64.exe -epool eu1-etc.ethermine.org:4444 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -asm 1 -dpool stratum+tcp://yiimp.ccminer.org:3252 -dwal DsUt9QagrYLvSkJHXCvhfiZHKafVtzd7Sq4 -dpsw x

Thank you very much!!

just use this code and replace ur wallet

EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool stratum+tcp://yiimp.ccminer.org:3252 -dwal DsUt9QagrYLvSkJHXCvhfiZHKafVtzd7Sq4 -dpsw x -dcri 23

your code is first of all for ethpool, which is for ETH not ETC!

I want to dual mine ETC + DCR on etc.ethermine and yiimp.

EthDcrMiner64.exe -epool eu1-etc.ethermine.org:4444 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool stratum+tcp://yiimp.ccminer.org:3252 -dwal DsUt9QagrYLvSkJHXCvhfiZHKafVtzd7Sq4 -dpsw x -dcri 23

[B{_}rg1]

when i mine only ETC i get 26mh/s single rx 470

if dual mine etc+dcr only 20 for ETC and 600 in DCR

is that normal

You can adjust the secondary coin intensity with the +/- keys while dual mining. Once you find the best intensity that maximizes the hash rate of the second coin without lowering the ETH hash rate, you can set it in your command line or configuration file with the -dcri parameter.

My RX 470 Shappire Nitro Plus 8GB reaches 28.8~29 MH/s on ETH (-dcri 23)

u mean like this

EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool stratum+tcp://yiimp.ccminer.org:3252 -dwal DsUt9QagrYLvSkJHXCvhfiZHKafVtzd7Sq4 -dpsw x -dcri 23

Hi, could you provide some help in how to exactly configure the config file for mining ETC + DCR with ethermine pool??
I get always rejected from the poolside and use the same lines as it would be ETH but changing it for the etc pool.

EthDcrMiner64.exe -epool eu1-etc.ethermine.org:4444 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -asm 1 -dpool stratum+tcp://yiimp.ccminer.org:3252 -dwal DsUt9QagrYLvSkJHXCvhfiZHKafVtzd7Sq4 -dpsw x

Thank you very much!!

just use this code and replace ur wallet

EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool stratum+tcp://yiimp.ccminer.org:3252 -dwal DsUt9QagrYLvSkJHXCvhfiZHKafVtzd7Sq4 -dpsw x -dcri 23

your code is first of all for ethpool, which is for ETH not ETC!

I want to dual mine ETC + DCR on etc.ethermine and yiimp.

EthDcrMiner64.exe -epool eu1-etc.ethermine.org:4444 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool stratum+tcp://yiimp.ccminer.org:3252 -dwal DsUt9QagrYLvSkJHXCvhfiZHKafVtzd7Sq4 -dpsw x -dcri 23

you are kidding right...

please read my post and stop spaming moronic replies.

That line of code I already use and gets rejected by etc-ethermine, therefore I would kindly ask for a working pool to mine ETC in combination with DCR.

Thank you

[DONcoinDEV]

EthDcrMiner64.exe -epool eu1-etc.ethermine.org:4444 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool stratum+tcp://yiimp.ccminer.org:3252 -dwal DsUt9QagrYLvSkJHXCvhfiZHKafVtzd7Sq4 -dpsw x -dcri 23

you are kidding right...

please read my post and stop spaming moronic replies.

That line of code I already use and gets rejected by etc-ethermine, therefore I would kindly ask for a working pool to mine ETC in combination with DCR.

Thank you


[/quote]

than try this ports..

Europe: eu1-etc.ethermine.org:4444 or eu1-etc.ethermine.org:14444
US: us1-etc.ethermine.org:4444 or us1-etc.ethermine.org:14444

or u can try

   
etc-eu1.nanopool.org

[nhirsch]

Greetings:
I'm relatively new to mining.  I currently have three 6 GPU Nvidia machines running various 1060s (picked them up as I could find them).  Most are Gigabyte 6GB Gaming cards and using latest drivers from the Gigabyte website, nothing modded.   All cards except the couple Extreme 1060 cards, started out at 19.X Mh/s.   The Extreme was a few Mh/s higher.  I've been able to fiddle getting almost 24 Mh/s on each one now with 80% power, core clock +98 and memory clock +618.  Everything is very stable on the Biostar BTC-250Pro MB.  Solo ETH Mining using Claymore 9.8      Start file is this:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

%~dp0\EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -ewal 0xF751A4b6A65956F4D48-xxxxxxxxxx-70c61/nha-eth-mm1/nrh-xxxxxx-@gmail.com -epsw x -mode 1 -ftime 10

Given the stability I have, do you think it's worthwhile to upgrade to Claymore 10.0?  I like the change where it the GPU numbers on MSI Afterburner will match what the Claymore shows but not sure if any other value at this point especially given what I've read above about some problems.

My next rig that I'm buildng which is using the new 8GPU Biostar BTC-250+ and 8 Gaming X MSI Radeon RX580s.   Would the START file look like for solo ETH mining using the Radeon GPUs be any different from the above when using Nvidia?    Also, should I use the stock firmware and stock drivers?    Suggestions welcome.
Thanks.

[SummersideGuy]

So out of all my mining cards I have 2 GTX 1060's both are the same brand Gigabyte Mini ITX 3GB with Samsung memory.

I have had them in the same rig now for about 2 months and can never put the memory on them above 825 without them crashing the machine, they are mixed in with AMD Cards. Whether it is claymore 9.7, 9.8, or 10 anything above 825 on memory would crash the machine so the best I could do per card was 23.3mh/s Eth with dual mining. Just the other day I received in another 570 and I pulled one of the two 1060's from that rig and put in the 570. The 1060 I pulled out I put in a spare slot in my day to day PC as it uses less power then the 570. Strange thing is this now that this 1060 is in a spare slot on my main PC I am able to oc the memory right to 1000 so with PM at 65 Clock at +150 and Memory oc'd to 1000 it has been running stable now for the last hour so far hashing at 24.6mhs dual mining. While on my mining rig if I attempt to put the other card ovewr 825 ut will crash within the hour and anything over 850 crashes it right away.

Not sure the reason behind this.

Both my mining rig and my day to day system have windows 7 64bit. I just updated my mining rig to the latest nvidia drivers as they were 2 months behind the new drivers installed on my day to day and no difference.
note: solo mining with the 1060 on my day to day machine yields 25.475mh/s

[smoolae]

Hi,

I have a problem. I'm using Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v10.0 for my 4x R9 290 and 1x R9 380 rig and I'm getting Ethereum hashrates 4.16 Mh/s for every R9 290 and 2.16 Mh/s for R9 380.

But the interesting part is that the last time I powered on my miner I got a solid 28 Mh/s from my 290s and 22 Mh/s from my 380 (on stock settings). What could have happened? Could this be a driver problem, I'm using Cromson BETA drivers right now (corrupted drivers?)? What drivers do You recommend for Claymore? And I'm pulling only 300w from the wall. Temperatures are below 50C and PSU is 3100w.

What are Your R9 290 AND R9 380 hashrates? Also, my Claymore miner doesn't let me use any addresses from ethermine.org or from ethpool.org (socket was closed remotely by pool).
What could be happening here?

Any help is appreciated!
Samuli

[vezpit]

For the second coin, does it matter what coin it is, as long as 'Claymore' or ccminer supports the algorithm? For example VTC on YiiMP

[greatauror28]

So out of all my mining cards I have 2 GTX 1060's both are the same brand Gigabyte Mini ITX 3GB with Samsung memory.

I have had them in the same rig now for about 2 months and can never put the memory on them above 825 without them crashing the machine, they are mixed in with AMD Cards. Whether it is claymore 9.7, 9.8, or 10 anything above 825 on memory would crash the machine so the best I could do per card was 23.3mh/s Eth with dual mining. Just the other day I received in another 570 and I pulled one of the two 1060's from that rig and put in the 570. The 1060 I pulled out I put in a spare slot in my day to day PC as it uses less power then the 570. Strange thing is this now that this 1060 is in a spare slot on my main PC I am able to oc the memory right to 1000 so with PM at 65 Clock at +150 and Memory oc'd to 1000 it has been running stable now for the last hour so far hashing at 24.6mhs dual mining. While on my mining rig if I attempt to put the other card ovewr 825 ut will crash within the hour and anything over 850 crashes it right away.

Not sure the reason behind this.

Both my mining rig and my day to day system have windows 7 64bit. I just updated my mining rig to the latest nvidia drivers as they were 2 months behind the new drivers installed on my day to day and no difference.
note: solo mining with the 1060 on my day to day machine yields 25.475mh/s

I can fully relate to what you're experiencing right now.

I'm building an 8gpu rig consisting of 8x 580 4gb Gaming X's and to maximize hash potential of each card, I did painstakingly put them in pairs and do the good ol trial and error to see if they ar indeed 30Mh cards. Turns out 6 out of 8 gives me 30.1 Mh/s with zero mem errors dual-mining with dcr.

Now onto the interesting part - when I put them all in one rig, only one of them hashes 30.1 while the rest are only 29.5 up to 29.8 dual-mining. No matter how many times i've reset the clocks via Wattman or I do unlimited number of reboots and miner restarts, I just can't get the 30Mh hashrate that I did got last week during testing each cards.

In someway, I could get them do to 30.1 up to 30.3 but they throw millions of errors per second, so I don't want that.

Anyone who can shed light on these?

[Call_Me_Bambi]

Hello i need help with using Claymore miner i'm currently using 1 EVGA GEFORCE GTX 1060 and 3 RX 580 Red Dragon PowerColor. It was mining good yesterday it was generating 25/Mhs per the red dragon and 15/Mhs for the EVGA. I have the ASRock Pro 110 BTC motherboard which supports up to 13/GPU. I was using Jaxx as a wallet but i'm going to be switching to Exodus which i read was alot better. Please help me with the directions or what i need to do to make this mine again or any other way. I was mining ETH not classic. In red it shows

ETH: Share Rejected!
Socket was closed remotely (by pool)
ETH Job Timeout, disconnect, retry in 20 sec...

and it keeps on repeating itselft.

It says the pool i was connected to is cn1.ethermine.org:14444

I don't see a "cn1" server on the Ethmine pool for ETH or ETC, only for Zcash and the config for that is "cn1-zcash.flypool.org:3333".
For ETH it would be, for example, "eu1.ethermine.org:4444", or "asia1.ethermine.org:4444"
If you post your full Claymore config we may be able to help more.

Please see the information below. The only thing i updated was the wallet address and my name. Thanks
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal 0xef830d6772ece5c5dbc55d7469e526a8376e8d03/Elito/YOUR_EMAIL -epsw x -mode 1 -ftime 10

Please let me know what is the best mining software to use with the current rig that i have in place. Thanks

Just noticed your using a mix of AMD & Nvidia - not something I know how to work with (I only use AMD), but I think Claymore works fine with both.
There is an alternative config for Nanopool that the nanopool auto-config utility gives and that is..
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal 0xef830d6772ece5c5dbc55d7469e526a8376e8d03.Elito/your@email.com -epsw x -mode 1 -ftime 10

[vezpit]

For the second coin, does it matter what coin it is, as long as 'Claymore' or ccminer supports the algorithm? For example VTC on YiiMP

Answered my own question.  Doesn't work as no way to add fee for dev.  Might be an interesting variation to the software for an increase from 1% to 2% on first coin & allow mining of others as the second coin