Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order

[bspurloc]

Is the S9 as loud as the S7?

   The fan noise on the S7 is unbearable compared to S3's. sigh.

[notlist3d]

Just ordered one. Wondering what power supplies people are using in the states?

Thanks guys!

I think you will find a lot with the AP3 from bitmain - https://bitmaintech.com/productDetail.htm?pid=000201505040743496917U7kGsCm0694 .   It is the one recommended from them "Bitmain recommends the APW3-12-1600-B2 power supply for both the S9 and S7 miner.".   

Just make sure you have the 205V or more so PSU can operate properly.

[philipma1957]

Just ordered one. Wondering what power supplies people are using in the states?

Thanks guys!

I suspect that the bitmaintech psu is just a tiny bit short to run an s-9

it does need 210 or more volts so if in USA you need correct voltage wires.

now if you are looking for an ATX 120 volt option EVGA has them  but they are costly

titanium 1600 watt cost - 386 usd

https://www.amazon.com/EVGA-SuperNOVA-TITANIUM-Crossfire-220-T2-1600-X1/dp/B00R33ZBQU/ref=sr_1_1?


platinum 342
https://www.amazon.com/EVGA-SuperNOVA-PLATINUM-Crossfire-220-P2-1600-X1/dp/B00NJG61JQ/ref=sr_1_3?

gold 302
https://www.amazon.com/EVGA-SuperNOVA-Crossfire-Warranty-120-G2-1600-X1/dp/B00MMLUIE8/ref=sr_1_2?

[ulatec]

Just ordered one. Wondering what power supplies people are using in the states?

Thanks guys!

I suspect that the bitmaintech psu is just a tiny bit short to run an s-9

it does need 210 or more volts so if in USA you need correct voltage wires.

now if you are looking for an ATX 120 volt option EVGA has them  but they are costly

titanium 1600 watt cost - 386 usd

https://www.amazon.com/EVGA-SuperNOVA-TITANIUM-Crossfire-220-T2-1600-X1/dp/B00R33ZBQU/ref=sr_1_1?


platinum 342
https://www.amazon.com/EVGA-SuperNOVA-PLATINUM-Crossfire-220-P2-1600-X1/dp/B00NJG61JQ/ref=sr_1_3?

gold 302
https://www.amazon.com/EVGA-SuperNOVA-Crossfire-Warranty-120-G2-1600-X1/dp/B00MMLUIE8/ref=sr_1_2?

Thanks! Along the lines of what I was looking for!

[Sierra8561]

any rumors on batch 4 release date?

[wmabern]

Just ordered one. Wondering what power supplies people are using in the states?

Thanks guys!

Where did you order one? The official site does not have any.

XMR Holder mining BTC  

Do you have a link for the above? The only thing I see when I Google it is a mining pool.
Thanks.

[philipma1957]

I just checked my two s-9's coming on weds well they are now coming on thurs and both have a line I have never seen.
I bolded the line below.


Shenzhen, China   06/22/2016   1:00 A.M.   Export Scan
Shenzhen, China   06/21/2016   10:15 P.M.
Your package is in transit. We're updating plans to schedule your delivery. / The package will be forwarded to a UPS facility in the destination city.



Lakewood, NJ, United States   06/21/2016   7:08 A.M.   The receiver must pay the duties or taxes due on the package.



Shenzhen, China   06/21/2016   3:07 P.M.   Your package is in transit. We're updating plans to schedule your delivery.
06/20/2016   12:40 P.M.   The package is awaiting clearing agency review. / The package is at the clearing agency awaiting final release.
Shenzhen, China   06/20/2016   11:15 P.M.   Arrival Scan
06/20/2016   10:59 P.M.   Departure Scan
06/20/2016   7:36 P.M.   Origin Scan
06/20/2016   5:06 P.M.   Pickup Scan
China   06/20/2016   1:10 A.M.   Order Processed: Ready for UPS


I have read this has happened to some people  and some paid it and some fixed it.

So if I pay for 2 units  how much is it?

If I want to fix it what do I do?

[alh]

I just checked my two s-9's coming on weds well they are now coming on thurs and both have a line I have never seen.
I bolded the line below.


Shenzhen, China   06/22/2016   1:00 A.M.   Export Scan
Shenzhen, China   06/21/2016   10:15 P.M.
Your package is in transit. We're updating plans to schedule your delivery. / The package will be forwarded to a UPS facility in the destination city.



Lakewood, NJ, United States   06/21/2016   7:08 A.M.   The receiver must pay the duties or taxes due on the package.

.....

I wonder if maybe this happened because you have two S9's as a single shipment, and the total value exceeded some threshold. In the past haven't you had "single miner shipments"? Perhaps in the future it might be worth considering staggered orders which become staggered shipments?

[philipma1957]

I just checked my two s-9's coming on weds well they are now coming on thurs and both have a line I have never seen.
I bolded the line below.


Shenzhen, China   06/22/2016   1:00 A.M.   Export Scan
Shenzhen, China   06/21/2016   10:15 P.M.
Your package is in transit. We're updating plans to schedule your delivery. / The package will be forwarded to a UPS facility in the destination city.



Lakewood, NJ, United States   06/21/2016   7:08 A.M.   The receiver must pay the duties or taxes due on the package.

.....

I wonder if maybe this happened because you have two S9's as a single shipment, and the total value exceeded some threshold. In the past haven't you had "single miner shipments"? Perhaps in the future it might be worth considering staggered orders which become staggered shipments?

They were staggered by more then a day.

 first order batch 2 order was on the 9th
 second batch 2 order was on the 12th

so the question is what will fees be for 4154   = 1985+1985+62+62

so I get a delay in shipping   it comes on thur vs wed and a mystery fee.

[Sierra8561]

I just checked my two s-9's coming on weds well they are now coming on thurs and both have a line I have never seen.
I bolded the line below.


Shenzhen, China   06/22/2016   1:00 A.M.   Export Scan
Shenzhen, China   06/21/2016   10:15 P.M.
Your package is in transit. We're updating plans to schedule your delivery. / The package will be forwarded to a UPS facility in the destination city.



Lakewood, NJ, United States   06/21/2016   7:08 A.M.   The receiver must pay the duties or taxes due on the package.

.....

I wonder if maybe this happened because you have two S9's as a single shipment, and the total value exceeded some threshold. In the past haven't you had "single miner shipments"? Perhaps in the future it might be worth considering staggered orders which become staggered shipments?

I had the exact same thing happen. I had to pay $63.00 for my 5 miners.

[Real-Duke]

Is the S9 as loud as the S7?

   The fan noise on the S7 is unbearable compared to S3's. sigh.

From what I have read in some threads ( I didn't have one myself) you can compare the noise from the S9 with an S7.
Maybe one of the owners can answer better?

[Sierra8561]

Is the S9 as loud as the S7?

   The fan noise on the S7 is unbearable compared to S3's. sigh.

From what I have read in some threads ( I didn't have one myself) you can compare the noise from the S9 with an S7.
Maybe one of the owners can answer better?

I can't tell a difference between the two. They seem the same to me.

[philipma1957]

I just checked my two s-9's coming on weds well they are now coming on thurs and both have a line I have never seen.
I bolded the line below.


Shenzhen, China   06/22/2016   1:00 A.M.   Export Scan
Shenzhen, China   06/21/2016   10:15 P.M.
Your package is in transit. We're updating plans to schedule your delivery. / The package will be forwarded to a UPS facility in the destination city.



Lakewood, NJ, United States   06/21/2016   7:08 A.M.   The receiver must pay the duties or taxes due on the package.

.....

I wonder if maybe this happened because you have two S9's as a single shipment, and the total value exceeded some threshold. In the past haven't you had "single miner shipments"? Perhaps in the future it might be worth considering staggered orders which become staggered shipments?

I had the exact same thing happen. I had to pay $63.00 for my 5 miners.

Well 63 for 5 is 12.60 each    so if my 2 are 25.20 it is fine with me.


@ real-duke if you get a whistler in s-7 or s-9  it is painfully loud otherwise they are close to being the same.

[Puffy23]

I just checked my two s-9's coming on weds well they are now coming on thurs and both have a line I have never seen.
I bolded the line below.


Shenzhen, China   06/22/2016   1:00 A.M.   Export Scan
Shenzhen, China   06/21/2016   10:15 P.M.
Your package is in transit. We're updating plans to schedule your delivery. / The package will be forwarded to a UPS facility in the destination city.



Lakewood, NJ, United States   06/21/2016   7:08 A.M.   The receiver must pay the duties or taxes due on the package.

.....

I wonder if maybe this happened because you have two S9's as a single shipment, and the total value exceeded some threshold. In the past haven't you had "single miner shipments"? Perhaps in the future it might be worth considering staggered orders which become staggered shipments?

They were staggered by more then a day.

 first order batch 2 order was on the 9th
 second batch 2 order was on the 12th

so the question is what will fees be for 4154   = 1985+1985+62+62

so I get a delay in shipping   it comes on thur vs wed and a mystery fee.

I believe items over $200 are subject to customs duties and/or taxes.  Then there is a Merchandise Processing Fee that is determined by a threshold of $2,500.  I don't claim to be an expert, but I know certain items like computers are exempt from one or both of the fees.  That's how some get it through with no additional cost (I think).

If you want to fight it, you need to identify what is exempt and make a claim based on that exemption.  If you want to pay it I believe you have to procure a broker to handle it (most shipping companies can do this).  The fees shouldn't be more than about 3%.  It may be faster and more economical to pay the fee depending on potential delay.

[NotFuzzyWarm]

I just checked my two s-9's coming on weds well they are now coming on thurs and both have a line I have never seen.
I bolded the line below.


Shenzhen, China   06/22/2016   1:00 A.M.   Export Scan
Shenzhen, China   06/21/2016   10:15 P.M.
Your package is in transit. We're updating plans to schedule your delivery. / The package will be forwarded to a UPS facility in the destination city.



Lakewood, NJ, United States   06/21/2016   7:08 A.M.   The receiver must pay the duties or taxes due on the package.

.....

I wonder if maybe this happened because you have two S9's as a single shipment, and the total value exceeded some threshold. In the past haven't you had "single miner shipments"? Perhaps in the future it might be worth considering staggered orders which become staggered shipments?

I had the exact same thing happen. I had to pay $63.00 for my 5 miners.

When shipping to the USA if the value of a shipment exceeds $2,500 then Customs Import Duty kicks in. Same applies to folks returning from abroad with trinkets they picked up during their travels.

Considering the price of s9's yeah 2x def puts ya over that threshold.

EDIT: Interesting reading... https://www.cbp.gov/trade/basic-import-export/internet-purchases

[philipma1957]

well they were ordered on the 9th and the 12th .

they have separate order numbers and separate tracking numbers.

so i am not going to go nuts over it. since they arrive the same day I guess they can be combined.  If the combination is legal for the total I am over 2500.

so I will lose the day pay the fee.

[generalt]

I think there was a post about the HST Code that they use for shipping.  If they use the wrong HST code you may incur additional charges.

https://bitcointalk.org/index.php?topic=1165628.msg13512588#msg13512588

[not.you]

The only time that happened to me was on an S7 and the fee was $38.  I think the cost was around $1900 but I can't recall now.

You might be able to call UPS and get it reversed.  I did.  But I had to pay the driver to get it and they sent me a refund check about a month later.

[philipma1957]

I think I am stuck since they sent my   june 9th order and my june 12th order on the same day.

each is 1985 plus shipping or 2047 + 2047 = 4094  which is over the threshold of 2500.

I do not want to complain  to ups as I have  had many orders before on the s-7 and even the s-9 .

So if the driver want 3% of 4100  that is 123 usd   i will eat the charge and never order gear from bitmaintech again .

 as I just can't deal with the drama any more.

I will have 4 s-9's and it will have to be enough

[notlist3d]

Just ordered one. Wondering what power supplies people are using in the states?

Thanks guys!

I suspect that the bitmaintech psu is just a tiny bit short to run an s-9

it does need 210 or more volts so if in USA you need correct voltage wires.

now if you are looking for an ATX 120 volt option EVGA has them  but they are costly

titanium 1600 watt cost - 386 usd

https://www.amazon.com/EVGA-SuperNOVA-TITANIUM-Crossfire-220-T2-1600-X1/dp/B00R33ZBQU/ref=sr_1_1?


platinum 342
https://www.amazon.com/EVGA-SuperNOVA-PLATINUM-Crossfire-220-P2-1600-X1/dp/B00NJG61JQ/ref=sr_1_3?

gold 302
https://www.amazon.com/EVGA-SuperNOVA-Crossfire-Warranty-120-G2-1600-X1/dp/B00MMLUIE8/ref=sr_1_2?

How many of the Bitmain APW3's have you tried out? Through my testing I have 1 remote connected to a APW3 and one now at my place connected to an APW3 and not having issues with them.

What way are you testing the APW3 to determine they are coming up short?  I have been testing by running the units with them so wanted to what tests you were using to get this. Just trying to compare as we seem to be getting different results.