ocminer
Legendary
Offline
Activity: 2660
Merit: 1240
|
|
December 11, 2016, 07:17:40 PM |
|
Guys, which pool is better for mining ZEC? (I'm in east EU) I'm thinking between Dwarfpool and Flypool. Probably some other (Nanopool, Suprnova or else) Tell me, pls.
Use zec.suprnova.cc and the EU node
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
rozsada
Member
Offline
Activity: 105
Merit: 10
|
|
December 11, 2016, 07:23:55 PM |
|
Guys, which pool is better for mining ZEC? (I'm in east EU) I'm thinking between Dwarfpool and Flypool. Probably some other (Nanopool, Suprnova or else) Tell me, pls.
Use zec.suprnova.cc and the EU node Thanks. Have you tried other pools?
|
|
|
|
rozsada
Member
Offline
Activity: 105
Merit: 10
|
|
December 11, 2016, 07:25:14 PM |
|
Guys, which pool is better for mining ZEC? (I'm in east EU) I'm thinking between Dwarfpool and Flypool. Probably some other (Nanopool, Suprnova or else) Tell me, pls.
Dwarfpool Quality you can trust! 0.04738844 ZEC Earning in 18 hours when i use flypool mby 0.03 something on that time and i make 430h/s with claymore's 9.1 so trust me dwarfpool is the best. Thanks for your calcs. Dwarfpool:Flypool = 1:0
|
|
|
|
Zoryk
Newbie
Offline
Activity: 11
Merit: 0
|
|
December 11, 2016, 07:25:27 PM |
|
Guys, which pool is better for mining ZEC? (I'm in east EU) I'm thinking between Dwarfpool and Flypool. Probably some other (Nanopool, Suprnova or else) Tell me, pls.
Use zec.suprnova.cc and the EU node And the beauty of it suprnova?
|
|
|
|
ocminer
Legendary
Offline
Activity: 2660
Merit: 1240
|
|
December 11, 2016, 07:26:36 PM |
|
Guys, which pool is better for mining ZEC? (I'm in east EU) I'm thinking between Dwarfpool and Flypool. Probably some other (Nanopool, Suprnova or else) Tell me, pls.
Use zec.suprnova.cc and the EU node Thanks. Have you tried other pools? I'm always comparing pools, suprnova (and coinmine) switched to PPLNS payout recently which made the payments bigger and more steady than before. It's merely your personal preference now.. Just decide which pool and pool op you like most, which support is best etc.
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
rozsada
Member
Offline
Activity: 105
Merit: 10
|
|
December 11, 2016, 07:29:12 PM |
|
Guys, which pool is better for mining ZEC? (I'm in east EU) I'm thinking between Dwarfpool and Flypool. Probably some other (Nanopool, Suprnova or else) Tell me, pls.
Use zec.suprnova.cc and the EU node Thanks. Have you tried other pools? I'm always comparing pools, suprnova (and coinmine) switched to PPLNS payout recently which made the payments bigger and more steady than before. It's merely your personal preference now.. Just decide which pool and pool op you like most, which support is best etc. Ok, I'll look at Suprnova. Have you tested Dwarfpool?
|
|
|
|
melloyellow
|
|
December 11, 2016, 07:30:24 PM |
|
Guys, which pool is better for mining ZEC? (I'm in east EU) I'm thinking between Dwarfpool and Flypool. Probably some other (Nanopool, Suprnova or else) Tell me, pls.
Use zec.suprnova.cc and the EU node Thanks. Have you tried other pools? I'm always comparing pools, suprnova (and coinmine) switched to PPLNS payout recently which made the payments bigger and more steady than before. It's merely your personal preference now.. Just decide which pool and pool op you like most, which support is best etc. Just in case you didn't know ocminer is the op at suprnova. ocminer, what payment scheme did you have in place before?
|
|
|
|
ocminer
Legendary
Offline
Activity: 2660
Merit: 1240
|
|
December 11, 2016, 07:32:24 PM |
|
Guys, which pool is better for mining ZEC? (I'm in east EU) I'm thinking between Dwarfpool and Flypool. Probably some other (Nanopool, Suprnova or else) Tell me, pls.
Use zec.suprnova.cc and the EU node Thanks. Have you tried other pools? I'm always comparing pools, suprnova (and coinmine) switched to PPLNS payout recently which made the payments bigger and more steady than before. It's merely your personal preference now.. Just decide which pool and pool op you like most, which support is best etc. Ok, I'll look at Suprnova. Have you tested Dwarfpool? Nope, I didn't mine there yet. Guys, which pool is better for mining ZEC? (I'm in east EU) I'm thinking between Dwarfpool and Flypool. Probably some other (Nanopool, Suprnova or else) Tell me, pls.
Use zec.suprnova.cc and the EU node Thanks. Have you tried other pools? I'm always comparing pools, suprnova (and coinmine) switched to PPLNS payout recently which made the payments bigger and more steady than before. It's merely your personal preference now.. Just decide which pool and pool op you like most, which support is best etc. Just in case you didn't know ocminer is the op at suprnova. ocminer, what payment scheme did you have in place before? It was Proportional payout before which was good for pool hoppers. All Suprnova Pools will be PPLNS from now on.
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
64dimensions
|
|
December 11, 2016, 07:54:25 PM |
|
Besides the high hash rate race for this mining software, has anyone looked at settings to operate their setup at it's most efficient?
Well here are some results set using MSI afterburner: 3x HD7970 DCII and 3x R9 290x radeon HD7970 set at 925/1250 Radeon R9 290x set at 875/1250 -50mV (all stilted cards) From stock settings, power consumption at the wall decreased about 10%, hash rate decreased about 3% FYI, the Claymore (v8.0) intensity is set at 4 for all cards.
|
|
|
|
forato
|
|
December 11, 2016, 08:05:09 PM |
|
Guys, which pool is better for mining ZEC? (I'm in east EU) I'm thinking between Dwarfpool and Flypool. Probably some other (Nanopool, Suprnova or else) Tell me, pls.
Use zec.suprnova.cc and the EU node Thanks. Have you tried other pools? I'm always comparing pools, suprnova (and coinmine) switched to PPLNS payout recently which made the payments bigger and more steady than before. It's merely your personal preference now.. Just decide which pool and pool op you like most, which support is best etc. Ok, I'll look at Suprnova. Have you tested Dwarfpool? Nope, I didn't mine there yet. Guys, which pool is better for mining ZEC? (I'm in east EU) I'm thinking between Dwarfpool and Flypool. Probably some other (Nanopool, Suprnova or else) Tell me, pls.
Use zec.suprnova.cc and the EU node Thanks. Have you tried other pools? I'm always comparing pools, suprnova (and coinmine) switched to PPLNS payout recently which made the payments bigger and more steady than before. It's merely your personal preference now.. Just decide which pool and pool op you like most, which support is best etc. Just in case you didn't know ocminer is the op at suprnova. ocminer, what payment scheme did you have in place before? It was Proportional payout before which was good for pool hoppers. All Suprnova Pools will be PPLNS from now on. [/quota This is not a good discussion... all big pools give the same profit-tax. I tested all.
|
|
|
|
markus124
|
|
December 11, 2016, 08:11:21 PM |
|
Well i just connected my rig to dwarpool. I'm going to give them 48 hours and report back. I think the best would be that someone with a few rigs with the same cards point 1 rig to each pool and report what they get (Flypool,suprnova,dwarfpool,coinmine, etc). That would be awesome I only have 1 rig.
|
|
|
|
KingDi
Newbie
Offline
Activity: 4
Merit: 0
|
|
December 11, 2016, 08:14:47 PM |
|
Don't use nicehach pool for mining zcash. I have 25% more profit in dwarfpool.
8 cards total (3 Nano, 4 RX480/4G, R9-290 Tri-X), ~2k/sec with undervolt/clock, 1.5kW. I had ~ 0.012 BTC/day in nicehash, now I have ~0.015 BTC/day in dwarf.
|
|
|
|
Golku
|
|
December 11, 2016, 08:18:58 PM |
|
Dwarfpool doesnt have ssl so higher fee
|
|
|
|
Trimegistus
Legendary
Offline
Activity: 1564
Merit: 1027
|
|
December 11, 2016, 08:24:27 PM |
|
Well i just connected my rig to dwarpool. I'm going to give them 48 hours and report back. I think the best would be that someone with a few rigs with the same cards point 1 rig to each pool and report what they get (Flypool,suprnova,dwarfpool,coinmine, etc). That would be awesome I only have 1 rig.
I've done that but it's pointless... Let's face, mining is always a game of chance! I've tested dwarfpool with one of my rigs during a period when the pool was unlucky and taking several hours to find a block. Obviously, during that period, flypool was much better for my other rig. Next day, I got a different result because dwarf was lucky to find a big number of blocks so my dwarf rig made a better profit. However, those numbers could not be compared with the previous because the network difficulty was really different! If you point your rig at one pool in days 1,2,3 and then point it at another pool for days 4,5,6 you cannot compare the results because the mining conditions were not the same! ZEC difficulty is like a roller coaster. Conclusions: 1 - If you like to get steady, regular payments, flypool. 2- If you don't mind waiting for hours for a small pool to get lucky; dwarf or suprnova. 3- Don't compare what cannot be compared. 4- Keep a close eye on ETH/ZEC/XMR profitability 5- If you have multiple rigs, spread them across several pools, or even several coins. Right now I have one rig at flypool, another at ethermine and a single GPU mining XMR
|
|
|
|
Xardas2014
|
|
December 11, 2016, 08:36:44 PM |
|
You do have another option. You could use multipoolhub and set up multi-algo mining. Your rigs will mine ZEC/ZCL/ETH/ETC based on most profitable. The op has already set up SSL connection and is in the process of adding XMR to the multi-algo. All the pools there are .9% fee and auto exchange is available for free. Pool op has a good rep and is quite active answering questions quickly. Search for his thread here.
I currently use dwarfpool and my ZEC earnings have risen above what coinmine was paying. I just endorsed miningpoolhub, so you might wonder why I'm not mining there............well I am. I have a Baikal miner currently there and removed other GPU/ASIC mining until XMR is in the ZEC/ETH multi-algo and more scrypt coins are added for my ASIC's.
|
|
|
|
pilotbtc1
Newbie
Offline
Activity: 89
Merit: 0
|
|
December 11, 2016, 08:46:58 PM |
|
Where is my mistake? Dwarfpool does not start. Thank you ZecMiner64.exe -zpool zec-eu1.dwarfpool.com:3333 -zwal t1RGQ4QhSqMMDNF8RaZRm5AHvrP7zyFZD6v.myrignumber1 -zpsw x -i 8
|
|
|
|
KingDi
Newbie
Offline
Activity: 4
Merit: 0
|
|
December 11, 2016, 08:49:04 PM |
|
Where is my mistake? Dwarfpool does not start. Thank you ZecMiner64.exe -zpool zec-eu1.dwarfpool.com:3333 -zwal t1RGQ4QhSqMMDNF8RaZRm5AHvrP7zyFZD6v.myrignumber1 -zpsw x -i 8
I use "ZecMiner64.exe -wd 1 -r 0 -i 8 -zpool zec-us1.dwarfpool.com:3336 -zwal zcash_wallet.name_of_worker -zpsw x -allpools 1"
|
|
|
|
manoe
Newbie
Offline
Activity: 51
Merit: 0
|
|
December 11, 2016, 08:55:18 PM |
|
When i'm mining on flypool eu the 290x shows in my rigs 320h/s and about 1,5% rejects but also like the others on the forum i get less profit then i should need to have on day payouts. Now i was trying to go to dwarfpool eu but when the miner begins i get 70% reject and on supernova eu i see in the miner that i get 30% rejects i was mining 10minutes each. Do i need to undervolt my card to mine on dwarfpool or supernova? I'm now back on flypool for the moment.
|
|
|
|
riser
Jr. Member
Offline
Activity: 59
Merit: 10
|
|
December 11, 2016, 09:00:08 PM |
|
When be a new version miner?
|
|
|
|
KingDi
Newbie
Offline
Activity: 4
Merit: 0
|
|
December 11, 2016, 09:03:59 PM |
|
When i'm mining on flypool eu the 290x shows in my rigs 320h/s and about 1,5% rejects but also like the others on the forum i get less profit then i should need to have on day payouts. Now i was trying to go to dwarfpool eu but when the miner begins i get 70% reject and on supernova eu i see in the miner that i get 30% rejects i was mining 10minutes each. Do i need to undervolt my card to mine on dwarfpool or supernova? I'm now back on flypool for the moment. Overclocking is a very bad advisor. 50MHz more could draw 50W more, so what's the point?
|
|
|
|
|