ioglnx
Sr. Member
Offline
Activity: 574
Merit: 250
Fighting mob law and inquisition in this forum
|
|
December 24, 2016, 11:31:32 AM |
|
Just as a FYI, it seems as though this version is about 18-20% faster then EWBF's release at stock settings. 360 vs 300 on EWBF.
What card @360 sols/s stock ? 1080 ? 1070, funny thing is that the profit is the same as before When checking the nicehash order book you see the price dropped against logic and current ZEC/ZCL prices. So I went back to EWBF and make 2 times more profit than with nicehash. The prices are not good and even didn't caught up the last days.
|
GTX 1080Ti rocks da house... seriously... this card is a beast³ Owning by now 18x GTX1080Ti :-D @serious love of efficiency
|
|
|
TomDD
Newbie
Offline
Activity: 15
Merit: 0
|
|
December 24, 2016, 11:35:03 AM |
|
Just in case anybody's interested I had a play with TDP reduction to see what the best performance would be with reduce power usage, heat, wear and tear etc... on my 1070. At stock I get around 367 Sols/s with the new release. Reducing the TDP gives the following: TDP Dec. | Sols/s | 0% | 367 | 10% | 363 | 20% | 355 | 25% | 350 | 30% | 343 | 40% | 317 |
I've gone with a 25% reduction in power usage which only reduces Sols/s by ~5%.
|
|
|
|
rednoW
Legendary
Offline
Activity: 1510
Merit: 1003
|
|
December 24, 2016, 11:46:57 AM |
|
Time for some high climbing )) The speed is really increasing with long run gtx1070 ... who can more? ))
|
|
|
|
sp_
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
December 24, 2016, 11:51:14 AM |
|
Just in case anybody's interested I had a play with TDP reduction to see what the best performance would be with reduce power usage, heat, wear and tear etc... on my 1070. At stock I get around 367 Sols/s with the new release. Reducing the TDP gives the following: TDP Dec. | Sols/s | 0% | 367 | 10% | 363 | 20% | 355 | 25% | 350 | 30% | 343 | 40% | 317 |
I've gone with a 25% reduction in power usage which only reduces Sols/s by ~5%. Thanks. You should also try to overclock the memory and core and combine with reduced tdp. What do you get with +150 on the core and +500 on memory?
|
|
|
|
rednoW
Legendary
Offline
Activity: 1510
Merit: 1003
|
|
December 24, 2016, 12:00:33 PM |
|
For everyday run a little bit slowly config
|
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
December 24, 2016, 12:26:44 PM |
|
Just in case anybody's interested I had a play with TDP reduction to see what the best performance would be with reduce power usage, heat, wear and tear etc... on my 1070. At stock I get around 367 Sols/s with the new release. Reducing the TDP gives the following: TDP Dec. | Sols/s | 0% | 367 | 10% | 363 | 20% | 355 | 25% | 350 | 30% | 343 | 40% | 317 |
I've gone with a 25% reduction in power usage which only reduces Sols/s by ~5%. Thanks. You should also try to overclock the memory and core and combine with reduced tdp. What do you get with +150 on the core and +500 on memory? EVGA GTX1070 FTW ~380 Sols/s per card (6x cards rig totalling 2280 sols/s) / TDP 50% (~91w per card in nvidia-smi - 692w @ wall) / Core +140 / Memory +600
|
|
|
|
vaulter
|
|
December 24, 2016, 12:49:26 PM |
|
Titan X Pascal - 590 1080 410 1070 400 titan X 360 980 260 970 240
all with lower tdp and various oc settings
|
|
|
|
sp_
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
December 24, 2016, 01:12:33 PM |
|
|
|
|
|
TomDD
Newbie
Offline
Activity: 15
Merit: 0
|
|
December 24, 2016, 01:22:09 PM |
|
Just in case anybody's interested I had a play with TDP reduction to see what the best performance would be with reduce power usage, heat, wear and tear etc... on my 1070. At stock I get around 367 Sols/s with the new release. Reducing the TDP gives the following: TDP Dec. | Sols/s | 0% | 367 | 10% | 363 | 20% | 355 | 25% | 350 | 30% | 343 | 40% | 317 |
I've gone with a 25% reduction in power usage which only reduces Sols/s by ~5%. Thanks. You should also try to overclock the memory and core and combine with reduced tdp. What do you get with +150 on the core and +500 on memory? I did run a couple of tests before. +400 memory for the -25% TDP I get 355Sols/s. +100 to the core, +400 memory and -25% TDP gives 367Sols/s which is back to the starting number. Guess plenty of room for adjusting to get much higher numbers/power ratio but I was just after something simple that kept the temps down.
|
|
|
|
NiceHashSupport
|
|
December 24, 2016, 01:38:00 PM |
|
Now that is a beast then. Need to get this card
|
|
|
|
DragonSlayer
|
|
December 24, 2016, 04:37:17 PM |
|
Getting 566 sol/s on my Titan X Pascal at Stock settings.
@vaulter,
What settings you running on the titan?
|
|
|
|
vaulter
|
|
December 24, 2016, 04:42:08 PM |
|
Getting 566 sol/s on my Titan X Pascal at Stock settings.
@vaulter,
What settings you running on the titan?
Didnt tune it much - 90% tdp, +50 core +150 mem Win 10 64 376.48 hotfix driver
|
|
|
|
Bluecheese
Member
Offline
Activity: 104
Merit: 18
|
|
December 24, 2016, 05:03:36 PM Last edit: December 24, 2016, 05:25:32 PM by Bluecheese |
|
Thanks for the updates bro!!
However on my 980's, I see that it starts off really good but it drops about 30 SOL/s. Is this just for stabilizing? Ether way it's much faster than before.
BTW, what is the -cm option for?
|
|
|
|
bensam1231
Legendary
Offline
Activity: 1764
Merit: 1024
|
|
December 24, 2016, 05:39:19 PM |
|
Just as a FYI the newest version uses 10% more power then the last measured at the wall. It produces about 18-20% more hash though, so it's still more efficient.
|
I buy private Nvidia miners. Send information and/or inquiries to my PM box.
|
|
|
PovertyByte
|
|
December 24, 2016, 08:35:15 PM |
|
EQM v1.0.4a NEWDownload: https://www.nicehash.com/tools/eqm_v1.0.4a_Win64.zipNOTE:This version only works for SM52 and SM61 capable cards (that means only 9xx and 10xx cards). No speedups for GTX 750 (Ti). In case of CUDA error, miner now quits, so your restart script can easily pick that up and do a restart. from 333 to 430 sol/sec with the same settings Very nice boost. Thank you edit: I removed the previous edit. It seems the card went from only using 72% power to now 78-80% now far as heat.
|
|
|
|
bensam1231
Legendary
Offline
Activity: 1764
Merit: 1024
|
|
December 24, 2016, 10:27:20 PM |
|
Yup, check power numbers. New version uses 10% more... but still more efficient then the last version.
|
I buy private Nvidia miners. Send information and/or inquiries to my PM box.
|
|
|
datBTC
Newbie
Offline
Activity: 16
Merit: 0
|
|
December 24, 2016, 10:30:32 PM |
|
Nice, my 1080 is pushing 505 SOL. Finally the 1080 hashes faster than the 1070 and by a good margin too
|
|
|
|
Bluecheese
Member
Offline
Activity: 104
Merit: 18
|
|
December 24, 2016, 11:11:35 PM |
|
Thanks for the updates bro!!
However on my 980's, I see that it starts off really good but it drops about 30 SOL/s. Is this just for stabilizing? Ether way it's much faster than before.
BTW, what is the -cm option for?
-cm is working mode. Try -h to see help. Hhhmmm "Working Mode" and auto. Working on what? Faster slower?
|
|
|
|
bucketofsocks
Member
Offline
Activity: 83
Merit: 11
|
|
December 25, 2016, 05:57:21 AM |
|
Nice, my 1080 is pushing 505 SOL. Finally the 1080 hashes faster than the 1070 and by a good margin too
what are your settings?
|
|
|
|
wacko
Legendary
Offline
Activity: 1106
Merit: 1014
|
|
December 25, 2016, 10:21:50 AM |
|
Did anyone try 1050 and 1050 Ti with the latest version? What's the hashrate at stock?
|
|
|
|
|