qberty
|
|
March 20, 2015, 04:07:13 PM |
|
Just received a batch 2 Titan. Got an extra cube to achieve the higher promised hashrate. Can't use it however because the controller board I got doesn't have a working ethernet port/firmware.
Anyone else had a problem starting up the titans with a blank screen and no ethernet activity? Did anyone fix it with a proper firmware installed? (which I tried to no avail).
did you try a new SD card... I use a Sandisk 8gb Class 10 card....format it etc and such put the new 2.00 img on it...see if that is the work around ..ie a crappy SD replace it? if by the above you mean the raspberry pi usb port is shot......not sure if they are using the ones on the 1st batch titans but anyway i was told by knc staff (take that as you want like they know squat) that you can just replace directly a raspberry pi B+ 512mb unit to the knc daughterboard if the raspberry pi is broken....others on here i think have done so (or maybe it was knc forums which are now down) BUT THIS ALL DEPENDS IF THEY USED THE SAME RASPBERRY PI AS THE 1ST BATCH ...no idea....they could have redesigned everything maybe toss some pics on here for the more knowledgeable of the folks here to help...guess we have to stick together now that they 'sunk' knc forums such as it was.... anyway all i got i wish you luck by the by let us know here if you got the raspberry pi B+ 512mb unit or did you get the NEWEST unit...curious...also is the board different then the old board on these units or did they simply toss in the extra cube and it is the same setup as a batch 1 .....anyway good luck all that comes to mind ...others on here will likely know more on this again pics may help the more tech savy here to help you out Well.. here's the Titan batch #2's controller board. The whole shipment is pretty much them just tossing in an extra Titan cube I guess. (have two more titan shipments coming in :/). Here's the Titan batch #2 Raspberry Pi And here's the extremely old Pi I have to show differences. Also, yes i've tried numerous types of Class 10 sdcard's as per this threads sadness. I literally do not want to send this board back as it'd take a week to get it back (plus I have to pay customs again). Unfortunately, it does seem like this is a Pi issue. So i'll have to RMA. Hopefully that goes over smoothly :/
|
|
|
|
qberty
|
|
March 20, 2015, 04:39:41 PM Last edit: March 20, 2015, 06:08:29 PM by qberty |
|
<snip>
Also, yes i've tried numerous types of Class 10 sdcard's as per this threads sadness. I literally do not want to send this board back as it'd take a week to get it back (plus I have to pay customs again). Unfortunately, it does seem like this is a Pi issue. So i'll have to RMA. Hopefully that goes over smoothly :/
Does the board power up w/o any cubes attached? Does the LCD show anything? What image are you flashing on your new SD cards? 1.02 or the full 2.0? Yes i'm able to power up the board without cubes. LCD is blank throughout any configuration I use. I flashed the 1.02 img, and the 2.0. Both boot up and run on my old Pi, but not the one they sent me. Trying to figure out how to use my old pi with it. But the GPIO port is smaller :/ *EDIT* Just decided to buy a local Raspberry Pi B+ instead of RMA'ing the entire board and waiting + paying. :/ Why do I feel like the next two shipments from batch two are going to punch me in the face in just the same way.
|
|
|
|
Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1465
Clueless!
|
|
March 21, 2015, 01:51:56 PM |
|
You can clearly see the drop in interest of the LTC since January , about 25% drop in hashrate, and another hude drop now expected..
I would say that this is a trend after LTC announced they stop development..
LTC RIP
yeah they had a big dip difficulty like down for the last 2 cycles of diff changes in the 3 day periods more then 25% .....and now it all is coming back within a day or two...and the price was only affected by bitcoin price drop thru all that from what i can tell...big yawn on ltc price changing heh... go figure.... still holding LTC for now on the 'vain' hope that LTC price will tick up when BTC price goes up ...only hope on my again 'puny' hope of getting around 1/2 of my loss on the titan (orig order) back .....may do better ...but my 'realistic' goal was always just get 1/2 back with elec etc incl ......as to the 2nd titan that MAY ROI with elec in middle of the 4th month more or less so not a big worry there...i figure the electric company will send me a 'fruit basket' here soon and write me up in the newsletter with all the $$$ i'm shucking out to them .... the above 'whim' of a plan for holding LTC can change at a moments notice...just saying the weak hand i'm playing as of this minute by the by also heard that all the 150mh Titans in the 2nd batch no matter when they were ordered are going to be shipped after the 450mh units..(that in the past usually means a month or more from previous ways they have done this ....imho) ....so knc is still sticking IT to folk...according to an email someone got (they ordered the 450mh and the 150mh the same day ...thus the email) ah.....consistency....knc ..picking up the bfl banner and pushing the envelope farther towards 'doucheness'...i expect josh from bfl to be hired any day now for the data hall operation...with the FTC/IRS after him he needs to get out of the country.....(i wonder what the Iceland extradition laws are like?)
|
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:)
|
|
|
The Avenger
|
|
March 22, 2015, 12:16:06 PM |
|
*EDIT* Just decided to buy a local Raspberry Pi B+ instead of RMA'ing the entire board and waiting + paying. :/ Why do I feel like the next two shipments from batch two are going to punch me in the face in just the same way.
KnCMiner - cheap bastards, faulty used goods. Pre-order now
|
"I am not The Avenger" 1AthxGvreWbkmtTXed6EQfjXMXXdSG7dD6
|
|
|
qberty
|
|
March 22, 2015, 02:27:15 PM |
|
*EDIT* Just decided to buy a local Raspberry Pi B+ instead of RMA'ing the entire board and waiting + paying. :/ Why do I feel like the next two shipments from batch two are going to punch me in the face in just the same way.
Lol, well so far, i'm getting the advertised 430-450 MH/s for this first shipment. If it goes like this for the other two, I could possibly ROI within a year!...if I don't die of sadness looking at that 256 MH/s miner for $1500 first.
|
|
|
|
SgtMoth
|
|
March 22, 2015, 04:01:28 PM |
|
*EDIT* Just decided to buy a local Raspberry Pi B+ instead of RMA'ing the entire board and waiting + paying. :/ Why do I feel like the next two shipments from batch two are going to punch me in the face in just the same way.
KnCMiner - cheap bastards, faulty used goods. Pre-order now lol, nice!
|
|
|
|
AFox
|
|
March 22, 2015, 04:16:02 PM |
|
Did anyone receive the Titan bonus miner that was offered with Batch 2 Neptune ?
|
|
|
|
jelin1984
Legendary
Offline
Activity: 2408
Merit: 1004
|
|
March 22, 2015, 05:23:53 PM |
|
no still wait my bonus titan
|
|
|
|
panhead
Newbie
Offline
Activity: 4
Merit: 0
|
|
March 22, 2015, 06:50:25 PM |
|
<snip>
Also, yes i've tried numerous types of Class 10 sdcard's as per this threads sadness. I literally do not want to send this board back as it'd take a week to get it back (plus I have to pay customs again). Unfortunately, it does seem like this is a Pi issue. So i'll have to RMA. Hopefully that goes over smoothly :/
Does the board power up w/o any cubes attached? Does the LCD show anything? What image are you flashing on your new SD cards? 1.02 or the full 2.0? Yes i'm able to power up the board without cubes. LCD is blank throughout any configuration I use. I flashed the 1.02 img, and the 2.0. Both boot up and run on my old Pi, but not the one they sent me. Trying to figure out how to use my old pi with it. But the GPIO port is smaller :/ *EDIT* Just decided to buy a local Raspberry Pi B+ instead of RMA'ing the entire board and waiting + paying. :/ Why do I feel like the next two shipments from batch two are going to punch me in the face in just the same way. My batch 1 controller has also just died - blank LCD and doesn't respond to a reflash/change of SD card as it did in the past. The controller comes on with 1 led and I can see web interface but not the cubes. Would you mind sharing how you modify a standard raspberry pi B+ to be compatible with the titan? The connectors JP10 etc all look different + what about mounting the daughterboard?
|
|
|
|
qberty
|
|
March 22, 2015, 07:14:58 PM |
|
<snip>
Also, yes i've tried numerous types of Class 10 sdcard's as per this threads sadness. I literally do not want to send this board back as it'd take a week to get it back (plus I have to pay customs again). Unfortunately, it does seem like this is a Pi issue. So i'll have to RMA. Hopefully that goes over smoothly :/
Does the board power up w/o any cubes attached? Does the LCD show anything? What image are you flashing on your new SD cards? 1.02 or the full 2.0? Yes i'm able to power up the board without cubes. LCD is blank throughout any configuration I use. I flashed the 1.02 img, and the 2.0. Both boot up and run on my old Pi, but not the one they sent me. Trying to figure out how to use my old pi with it. But the GPIO port is smaller :/ *EDIT* Just decided to buy a local Raspberry Pi B+ instead of RMA'ing the entire board and waiting + paying. :/ Why do I feel like the next two shipments from batch two are going to punch me in the face in just the same way. My batch 1 controller has also just died - blank LCD and doesn't respond to a reflash/change of SD card as it did in the past. The controller comes on with 1 led and I can see web interface but not the cubes. Would you mind sharing how you modify a standard raspberry pi B+ to be compatible with the titan? The connectors JP10 etc all look different + what about mounting the daughterboard? The new B+ has the same pinout and fits exactly into the actual controller board. If yours has an ethernet port and the yellow rca jack, then it wont work and you'll need to get the newer pi B+.if you can see the web interface, that it's probably not a software/pi problem. Same thing happened to me, and I had to go to the advanced tab, and set the clocks for each die. Applied it, then it started detecting cubes and mining.
|
|
|
|
panhead
Newbie
Offline
Activity: 4
Merit: 0
|
|
March 22, 2015, 09:28:17 PM |
|
<snip>
Also, yes i've tried numerous types of Class 10 sdcard's as per this threads sadness. I literally do not want to send this board back as it'd take a week to get it back (plus I have to pay customs again). Unfortunately, it does seem like this is a Pi issue. So i'll have to RMA. Hopefully that goes over smoothly :/
Does the board power up w/o any cubes attached? Does the LCD show anything? What image are you flashing on your new SD cards? 1.02 or the full 2.0? Yes i'm able to power up the board without cubes. LCD is blank throughout any configuration I use. I flashed the 1.02 img, and the 2.0. Both boot up and run on my old Pi, but not the one they sent me. Trying to figure out how to use my old pi with it. But the GPIO port is smaller :/ *EDIT* Just decided to buy a local Raspberry Pi B+ instead of RMA'ing the entire board and waiting + paying. :/ Why do I feel like the next two shipments from batch two are going to punch me in the face in just the same way. My batch 1 controller has also just died - blank LCD and doesn't respond to a reflash/change of SD card as it did in the past. The controller comes on with 1 led and I can see web interface but not the cubes. Would you mind sharing how you modify a standard raspberry pi B+ to be compatible with the titan? The connectors JP10 etc all look different + what about mounting the daughterboard? The new B+ has the same pinout and fits exactly into the actual controller board. If yours has an ethernet port and the yellow rca jack, then it wont work and you'll need to get the newer pi B+.if you can see the web interface, that it's probably not a software/pi problem. Same thing happened to me, and I had to go to the advanced tab, and set the clocks for each die. Applied it, then it started detecting cubes and mining. Thanks good to know. Its just like the cables were connected the wrong way round (or not at all) - I can't even read the temperature in the dies. But the LCD screen is blank and only one LED is on. Will update the thread if I figure it out etc...
|
|
|
|
adaseb
Legendary
Offline
Activity: 3878
Merit: 1733
|
|
March 23, 2015, 03:41:12 AM |
|
So how many of these Titan 2 miners will come online exactly? Looks like the difficulty went down and now back up.
|
|
|
|
Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1465
Clueless!
|
|
March 23, 2015, 04:20:42 AM |
|
So how many of these Titan 2 miners will come online exactly? Looks like the difficulty went down and now back up.
the 'rumor' i heard way back was they shipped 2.5K of units 1st batch (heh amazing how that works with no refunds) and about that amount for their 2nd batch could get 'interesting' if that was the case anyway perhaps others have a better more reliable source...then knc sales hype back in the day when they were selling these as fast as possible (i think that is where i got the figures from..KNC patting themselves on the back)
|
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:)
|
|
|
bbxx
|
|
March 23, 2015, 08:36:19 AM |
|
hello neptune owners
where i can find good tutorial of neptune downclocking ? how low i can push it? what settings ? i would go as low as it can be
thanks
|
|
|
|
s1gs3gv
Legendary
Offline
Activity: 1316
Merit: 1014
ex uno plures
|
|
March 23, 2015, 01:53:49 PM Last edit: March 24, 2015, 12:45:34 AM by s1gs3gv |
|
So how many of these Titan 2 miners will come online exactly? Looks like the difficulty went down and now back up.
the 'rumor' i heard way back was they shipped 2.5K of units 1st batch (heh amazing how that works with no refunds) and about that amount for their 2nd batch I very much doubt that. Towards the end of batch 1 I checked their cart using the well known method of trying to order a very large number of Titans. The cart would reply with an error message which told the customer how many were actually available. IIRC there were something like ~900 left when they closed batch 1. I got the impression that they couldn't sell all of batch 1 so they closed it and announced batch 2 to save face. I'd be very surprised if they sold many batch 2 miners. Its possible they closed them out at wholesale to a bulk buyer, but few people were buying batch 2 machines at those prices at that time. I also believe that the reason they brought out the mini Titans was to try to clear unsold stock.
|
|
|
|
|
Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1465
Clueless!
|
|
March 24, 2015, 06:09:06 AM |
|
So how many of these Titan 2 miners will come online exactly? Looks like the difficulty went down and now back up.
the 'rumor' i heard way back was they shipped 2.5K of units 1st batch (heh amazing how that works with no refunds) and about that amount for their 2nd batch I very much doubt that. Towards the end of batch 1 I checked their cart using the well known method of trying to order a very large number of Titans. The cart would reply with an error message which told the customer how many were actually available. IIRC there were something like ~900 left when they closed batch 1. I got the impression that they couldn't sell all of batch 1 so they closed it and announced batch 2 to save face. I'd be very surprised if they sold many batch 2 miners. Its possible they closed them out at wholesale to a bulk buyer, but few people were buying batch 2 machines at those prices at that time. I also believe that the reason they brought out the mini Titans was to try to clear unsold stock. yeah as I said ....was some 'hype' someplace ...back when everyone 'thought' they had ethics that they sold 2.5K of 1st batch units etc.....it is in some KNC propaganda someplace...the 2nd batch the same blather ... I really really hope you are correct..I may not be able to get 'all' my $$$ back on this bad investment..but with being a legal miner in usa and equip deductions...and what I may mine even at this low LTC rate ....if we get a good BTC and on coat tails LTC correction up in price...I may JUST may... with electric use (and this 2nd cheaper titan I got) only be 1/4 the price I paid for this no refund no roi orig titan unit delivered around 3.75 months late (later for others)...that is a lot of running around in dismay to lose only 25% to those KNC crooks 900 left sounds very encouraging......don't suppose anyone has any idea on batch 2 stuff with the same trick and/or the 150mh units? . (heh ...I forget this is KNC we are talking about.....I still expect a Titan Data Hall out of these guys even if not on any big scale ..simply because they have the chips and they can....yet another thing I 'hope' I am incorrect about.....I so want them so 'overextended on the bitcoin data hall(s) that a Titan data hall is just not possible with the drop in btc price etc....)
|
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:)
|
|
|
n00ber
|
|
March 24, 2015, 09:07:19 AM |
|
is there any chance to get my money back from these scammers?
|
|
|
|
mishax1
Legendary
Offline
Activity: 2898
Merit: 1017
|
|
March 24, 2015, 09:43:24 AM |
|
is there any chance to get my money back from these scammers?
What did you order ?
|
|
|
|
Jamphone
|
|
March 24, 2015, 01:40:46 PM |
|
Would anybody by chance have screen grabs of the old KNC news releases? They deleted all of their old promises from their site. In particular I need the news release from April, 2014 announcing the delay and compensation by August?
I have this thing going on in Stockholm I need it for...
|
|
|
|
|