sublimus
|
|
March 08, 2017, 12:54:40 PM |
|
@EWBF. you miner really good. using it long time. question: when you put option no fee? already paid many coins to you. just show some love to me and i give more love to you. you like that? Yes, i will add option "fee" which will allow you set devFee manually for example --fee 0 is no fee --fee 1 is 1% etc. This option will be added in version 0.3.3b and released around march 20th. Aren't you worried people will just set it to 0? Maybe just lower it to 1% or 1/2%, the increased adoption will probably even out in the end. Like Claymore the nofee option will come with a decrease in performance. The best way people to have a no fee miner is to code one yourself. Just try to and in the end you will be more than happy to pay a small fee. Well i am.
|
|
|
|
thesavoyard
|
|
March 08, 2017, 03:12:51 PM |
|
@EWBF. you miner really good. using it long time. question: when you put option no fee? already paid many coins to you. just show some love to me and i give more love to you. you like that? Yes, i will add option "fee" which will allow you set devFee manually for example --fee 0 is no fee --fee 1 is 1% etc. This option will be added in version 0.3.3b and released around march 20th. Aren't you worried people will just set it to 0? Maybe just lower it to 1% or 1/2%, the increased adoption will probably even out in the end. Like Claymore the nofee option will come with a decrease in performance. The best way people to have a no fee miner is to code one yourself. Just try to and in the end you will be more than happy to pay a small fee. Well i am. I have no problem paying EWBF a fee. He not only makes NVidia a viable and economic miner, he blows the competition up.
|
|
|
|
painmaker
Member
Offline
Activity: 71
Merit: 10
|
|
March 08, 2017, 03:32:37 PM |
|
Is anyone using EWBF on linux and if so can you tell me how you are OC the cards? I am using the nvidia-settings and I am setting core, mem and fan speed but I feel like I am missing something else.
nope, that's how you OC. In MSI afterburner I have a PowerLimit and TempLimit, do those correlate to nvidia-settings. I have searched and looked at many articles and cannot find anything. Just wandering if setting the fan speed in linux is how temp limit is handled in MSI afterburner TempLimit is the temp you allow the card to reach before shutting down. You adjust the fan curve to maintain the temp below your TempLimit. Ideally 55c to 65c. right now I have nvidia-settings -a '[gpu:N]/GPUGraphicsClockOffset[3]=150' nvidia-settings -a '[gpu:N]/GPUMemoryTransferRateOffset[3]=525' nvidia-settings -a "[gpu:N]/GPUFanControlState=1" nvidia-settings -a '[fan-N]/GPUTargetFanSpeed=70' Are there any other settings to control temp? Enable Persistence Mode Power limit to 90w Thanks a billion, that was what I was missing. With the persistence, does it stay set through a reboot, or do I need to add those 2 commands to my startup script? you need root privilege open after.local file sudo vi /etc/init.d/after.local and add this lines /usr/bin/nvidia-smi -pm 1 /usr/bin/nvidia-smi -pl 90
while i agree with all of the supplied information about OC-ing nvidia-cards under linux i just found my system (GTX970 + GTX980) to be stuck in performance-level 2 (out of a range of 0 - 3) and ignoring GPUMemoryTransferRateOffset -commands. running nvidia-settings -q GPUPerfModes confirms that memTransferRateeditable=0 and memclockeditable=0 for perf < 3 for my GTX980 and =0 in all perf-levels for my GTX970. i'm not sure about the GTX970 but i am somewhat confident that i've set a custom GPUMemoryTransferRateOffset on the GTX980 in the past but cannot remember how. can anybody hint me to what i might need to do to enable/set performance-level 3 on my cards? many thanks in advance, painmaker
|
|
|
|
murasame2003
Newbie
Offline
Activity: 42
Merit: 0
|
|
March 09, 2017, 04:37:48 PM |
|
0.3.2b is out. Thanks EWBF. Checking it out now.
|
|
|
|
k0stas
|
|
March 09, 2017, 05:49:46 PM Last edit: March 09, 2017, 07:23:45 PM by k0stas |
|
Is anyone using EWBF on linux and if so can you tell me how you are OC the cards? I am using the nvidia-settings and I am setting core, mem and fan speed but I feel like I am missing something else.
nope, that's how you OC. In MSI afterburner I have a PowerLimit and TempLimit, do those correlate to nvidia-settings. I have searched and looked at many articles and cannot find anything. Just wandering if setting the fan speed in linux is how temp limit is handled in MSI afterburner TempLimit is the temp you allow the card to reach before shutting down. You adjust the fan curve to maintain the temp below your TempLimit. Ideally 55c to 65c. right now I have nvidia-settings -a '[gpu:N]/GPUGraphicsClockOffset[3]=150' nvidia-settings -a '[gpu:N]/GPUMemoryTransferRateOffset[3]=525' nvidia-settings -a "[gpu:N]/GPUFanControlState=1" nvidia-settings -a '[fan-N]/GPUTargetFanSpeed=70' Are there any other settings to control temp? Enable Persistence Mode Power limit to 90w Thanks a billion, that was what I was missing. With the persistence, does it stay set through a reboot, or do I need to add those 2 commands to my startup script? you need root privilege open after.local file sudo vi /etc/init.d/after.local and add this lines /usr/bin/nvidia-smi -pm 1 /usr/bin/nvidia-smi -pl 90
while i agree with all of the supplied information about OC-ing nvidia-cards under linux i just found my system (GTX970 + GTX980) to be stuck in performance-level 2 (out of a range of 0 - 3) and ignoring GPUMemoryTransferRateOffset -commands. running nvidia-settings -q GPUPerfModes confirms that memTransferRateeditable=0 and memclockeditable=0 for perf < 3 for my GTX980 and =0 in all perf-levels for my GTX970. i'm not sure about the GTX970 but i am somewhat confident that i've set a custom GPUMemoryTransferRateOffset on the GTX980 in the past but cannot remember how. can anybody hint me to what i might need to do to enable/set performance-level 3 on my cards? many thanks in advance, painmaker For performance mode nvidia-settings -a [gpu:0]/GPUPowerMizerMode=1 Valid values for 'GPUPowerMizerMode' are: 0, 1 and 2. If you have many cards replace [gpu:0] with [gpu:N]
|
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
March 09, 2017, 06:19:35 PM Last edit: March 09, 2017, 06:30:44 PM by m1n1ngP4d4w4n |
|
v0.3.2b Nice, +1% on my GTX 1070 farm ! (maybe even be more than that, but have to make average on about half a day to have some accurate numbers) btw you should post at the end of the thread, when you release something new Good work ! 0.3.2b is out. Thanks EWBF. Checking it out now. Thanks for the notice !
|
|
|
|
kapsel
Member
Offline
Activity: 60
Merit: 10
|
|
March 09, 2017, 07:01:25 PM |
|
GTX 1080 FE, 0.3.2b
I've noticed that memory speed now has large impact on mining speed, with full oc(120% power/+220core/+1000mem) my 1080s hash at almost 600 sol/s, however going over +500 mhz(10ghz effective speed) sees little to no improvements. Current power optimized setting for me is 65% power, +220 core, +500 mhz mem, which yields about 500 sol/s.
|
|
|
|
PotShot-RSA
Newbie
Offline
Activity: 38
Merit: 0
|
|
March 09, 2017, 07:08:30 PM |
|
GTX 960 2GB 1418/7010
0.3.1b 164 sol/s average 0.3.2b 170 sol/s average
Roughly. Thanks!
|
|
|
|
hhdllhflower
Newbie
Offline
Activity: 18
Merit: 0
|
|
March 10, 2017, 04:28:51 AM |
|
GTX1080Ti 684sol/s 0.3.1b
|
|
|
|
jiggytom
Legendary
Offline
Activity: 1068
Merit: 1020
|
|
March 10, 2017, 04:39:45 AM |
|
GTX1080Ti 684sol/s 0.3.1b Got a TI already?
|
BTC: 174MGp3R5prNbuen31Kx5G5XuyuAXu9jye LBC: bWYN8NXGKWsgEAd6tQnJ5YRo2Z4r6PjxBH
|
|
|
thesavoyard
|
|
March 10, 2017, 07:01:20 AM |
|
GTX1080Ti 684sol/s 0.3.1b Very nice, going to finish my zec miner with gtx 1080ti
|
|
|
|
minerx117
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
March 10, 2017, 08:36:20 AM |
|
Version 0.3.2b. Thank You
Regards #Nemo
|
NemosMiner-v3.8.1.3
|
|
|
minerx117
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
March 10, 2017, 08:39:44 AM |
|
GTX 960 2GB 1418/7010
0.3.1b 164 sol/s average 0.3.2b 170 sol/s average
Roughly. Thanks!
tested: GTX 1050ti 4GB NVI_+155_+50_ 0.3.1b 170 sol/s average 0.3.2b 179 sol/s average Thanks!
|
NemosMiner-v3.8.1.3
|
|
|
PovertyByte
|
|
March 10, 2017, 03:25:47 PM |
|
@EWBF. you miner really good. using it long time. question: when you put option no fee? already paid many coins to you. just show some love to me and i give more love to you. you like that? Yes, i will add option "fee" which will allow you set devFee manually for example --fee 0 is no fee --fee 1 is 1% etc. This option will be added in version 0.3.3b and released around march 20th. Aren't you worried people will just set it to 0? Maybe just lower it to 1% or 1/2%, the increased adoption will probably even out in the end. Like Claymore the nofee option will come with a decrease in performance. The best way people to have a no fee miner is to code one yourself. Just try to and in the end you will be more than happy to pay a small fee. Well i am. I have no problem paying EWBF a fee. He not only makes NVidia a viable and economic miner, he blows the competition up. This plus the alternative to supporting these 1-2% fee miners is for other people to just make private miners at atrocious down payment rates that only those with mega farms can ROI on This here keeps an even playing field for all to mine
|
|
|
|
Newuser16
Newbie
Offline
Activity: 18
Merit: 0
|
|
March 10, 2017, 07:11:37 PM |
|
GTX1080Ti 684sol/s 0.3.1b is it OC'ed?
|
|
|
|
PovertyByte
|
|
March 10, 2017, 07:25:35 PM |
|
GTX1080Ti 684sol/s 0.3.1b is it OC'ed? I missed this. I also want to know if OC'd? By calculating, the 1070 is still far greater in ROI
|
|
|
|
thesavoyard
|
|
March 10, 2017, 08:41:32 PM |
|
GTX1080Ti 684sol/s 0.3.1b is it OC'ed? I missed this. I also want to know if OC'd? By calculating, the 1070 is still far greater in ROI 684 sols/s @ $500 has a much faster ROI than 450 sols/s @ $400. The GTX 1080ti will ROI 60 sooner if it really does 684 sol/s.
|
|
|
|
Zimmsquad
Member
Offline
Activity: 108
Merit: 10
|
|
March 10, 2017, 08:45:26 PM |
|
Where is the $500 coming from? 1080 ti is $699 minimum
|
|
|
|
|
Zimmsquad
Member
Offline
Activity: 108
Merit: 10
|
|
March 11, 2017, 07:22:11 AM |
|
I wonder if the performance will be enough to justify $500?
What are current hash rates on 1080?
|
|
|
|
|