didi1966
Newbie
Offline
Activity: 41
Merit: 0
|
|
January 08, 2019, 06:31:10 AM |
|
Maybe somebody can help.... my 2PAC stick is running on a USB Hub (120W power) very fine.... but always when a put a second 2PAC stick in the same USB Hub, the first 2PAC stick dies.... if I add a 3rd one.. same game... always the last one survives, all other die... the USB Hub has 120W power.. should be enough for 2 sticks... System is running on Ubuntu.. Has someone any ideas??
best regards Dietmar
|
|
|
|
minefarmbuy
Full Member
Offline
Activity: 1022
Merit: 221
We are not retail.
|
|
January 08, 2019, 11:41:56 AM |
|
Your hub doesn't have enough amp per port to run multiples i suspect. Can you post specs or a link to the product your using?
|
|
|
|
didi1966
Newbie
Offline
Activity: 41
Merit: 0
|
|
January 08, 2019, 12:26:16 PM |
|
|
|
|
|
sidehack
Legendary
Offline
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
|
|
January 08, 2019, 01:48:59 PM |
|
If it's an issue of plugging them in in sequence, try plugging them all in and then kicking on power.
|
|
|
|
didi1966
Newbie
Offline
Activity: 41
Merit: 0
|
|
January 08, 2019, 10:51:51 PM |
|
Thanks.... was a good idea... seems to work :-) regards Dietmar
|
|
|
|
cekolaw
Newbie
Offline
Activity: 19
Merit: 13
|
|
January 16, 2019, 06:28:24 AM |
|
Guys for the life of me i cannot get cgminer to activate the GekkoScience 2Pac BM1384 Stickminer. Using Ubuntu 16.04, I compiled properly with the --enable-gekko switch.
lsusb lists the device properly: Bus 002 Device 004: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
cgminer -n displays: [2017-05-26 13:52:43.003] USB all: found 5 devices - listing known devices .USB dev 0: Bus 2 Device 4 ID: 10c4:ea60 Manufacturer: 'GekkoScience' Product: '2Pac BM1384 Bitcoin Miner' [2017-05-26 13:52:43.003] 1 known USB devices
but when i run ./cgminer -o stratum+tcp://sha256.eu.nicehash.com:3334/#xnsub -u XXXXXXXXXXX it states no devices detected. when i press U and then L i get this: Bus 2 Device 4 ID: 10c4:ea60 GekkoScience 2Pac BM1384 Bitcoin Miner inactive 1 total known USB device
No clue how to enable this device. would love an expert to chime in. im lost, and new.
Hi, did anyone respond and did you manage to resolve this issue? Any advise appreciated, thanks. I am facing this in my new Raspberry Pi...
|
|
|
|
zac123
Newbie
Offline
Activity: 114
Merit: 0
|
|
January 21, 2019, 10:02:28 AM |
|
hi everyone,
i currently have two of my USBs with a solid white light. Should they just be chucked or is there some way to salvage something from them?
thanks zac
|
|
|
|
Filax
Jr. Member
Offline
Activity: 35
Merit: 24
|
|
January 23, 2019, 07:10:15 PM |
|
Hi I just have a question about those keys, i'm actually playing with them! And that fun But i'm asking something : I s there a limit to the maximum Mhz value? Because i tryed 300 => 305 => 310 etc, and CG Miner seem work ?Of course, sometime, my power block can't follow me in my tests... The raspberry cry! Here is my actual small crappy miner I get 300 Mhz (around 62/64 Ghz seconds) on a raspberry (But i need to patch the usb cables to put more power, 3 amps per ports) https://www.youtube.com/watch?v=k2ouWoFRMqwYou can't imagine the power needed when you want to quit the factory setup, 100 MHz. I tryed many USB HUB... But most of them can't deliver more than 2 amps per slots...
|
|
|
|
sidehack
Legendary
Offline
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
|
|
January 23, 2019, 07:37:26 PM |
|
You can't imagine the power needed when you want to quit the factory setup, 100 MHz.
Actually you can, because there's a chart in the first post. The fastest I've ever seen someone push a 2Pac was about 350MHz. I've never pushed one past 300MHz (hence why the chart cuts off there; it's my data). VH can tell you where the code stops supporting speeds, but it's probably upward of 500MHz (technically possible maybe with liquid immersion). That's a decent setup you have there, pretty sweet repurposed cooler. If you ever feel like upgrading to NewPacs, they'll mount up exactly the same as the 2Pacs (screws in the same place and everything), but NewPacs overclock like a breeze. You can typically push them to three times the stock hashrate without adjusting voltage. Your setup could see upwards of 300GH, especially with ASICBoost enabled. I don't know how feasible it'd be for you, but GekkoScience also makes a USB hub good for 3A per port. You'd be able to power both sticks and your Pi off it, using a single 12V brick to power the hub instead of multiple 5V adapters and alligator clips.
|
|
|
|
Filax
Jr. Member
Offline
Activity: 35
Merit: 24
|
|
January 23, 2019, 07:47:03 PM |
|
Hi Thanks for the reply As you understand i try to make the most efficient VS the power needed And you know? I just ordered 6 of the newpac keys! Can't wait to use them!I ordered too a new special HUB (made for those kind of key like say the site) (i don"t know if i can put a link?)Really interresting your HUB!? Any link?About the chart : Yes i saw it! But the max value go to 300 max and i thinked that i can't push up, so if i resume : More than i get power AMPS => And more i can cool down the chips => More i can get G-HASH/S?If YES, really good news! Really, i can't wait to play with the new one! when i see the technical specs I can' imagine with a 10 amps power block and a mega passive cool down fan I'm enough crazy to test this... You say : "multiple 5V adapters and alligator clips."Yeah i know it's crappy But i'm actually making tests... The raspberry is really sensible with power stuff :/ But when done, i'll make a 3D printed nice box for it
|
|
|
|
vh (OP)
|
|
January 23, 2019, 08:02:58 PM |
|
|
|
|
|
Filax
Jr. Member
Offline
Activity: 35
Merit: 24
|
|
January 23, 2019, 08:05:54 PM |
|
Thanks for the links, i'll take a look and i'm sure i can beat them!
|
|
|
|
sidehack
Legendary
Offline
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
|
|
January 23, 2019, 08:13:53 PM |
|
I'm pretty sure the main regulator on these sticks will handle 500MHz at the chips (with minimal tweaking out-of-spec of voltage adjustment parts to up around 1.8V from factory max 1.6V), if other parts don't start melting first. You'd be pushing at least 15W into each chip, which probably cannot be done with air cooling.
If you bought a hub said to be made for these sticks, it's likely the one I'm talking about and it should treat you well.
Thanks for them links, VH. I was not aware of a 400MHz attempt.
|
|
|
|
Filax
Jr. Member
Offline
Activity: 35
Merit: 24
|
|
January 24, 2019, 10:46:58 AM Last edit: January 24, 2019, 03:11:47 PM by Filax |
|
HI I just checked the name of my futur HUB and it's the gekkoscience Gekkoscience 7 Port USB Hub 2.0 So with 3 amps per port, i think to have enough power to play a bit Edit : I tested the actual config to 325/330 MHZ , it work... The rapsberry mewl a bit Bit it work.
|
|
|
|
avulsionist
Jr. Member
Offline
Activity: 45
Merit: 1
|
|
February 09, 2019, 09:46:30 PM |
|
I have had my 2pacs running at 225MHz nonstop for a long time no problems. Thanks to all the help in this forum it's now just a stable little farm. After all this time, one of them stopped blinking. I figured it had bit the bucket but when finding it in the cgminer conosle it's still chugging along with no HW errors. Has anyone ever had the blinking stop on a 2pac? Should i worry? I am a bit color blind but it looks to be a steady blue even though it's hashing.
|
|
|
|
gcanelson
Member
Offline
Activity: 110
Merit: 56
|
|
March 01, 2019, 07:31:31 PM |
|
I have had my 2pacs running at 225MHz nonstop for a long time no problems. Thanks to all the help in this forum it's now just a stable little farm. After all this time, one of them stopped blinking. I figured it had bit the bucket but when finding it in the cgminer conosle it's still chugging along with no HW errors. Has anyone ever had the blinking stop on a 2pac? Should i worry? I am a bit color blind but it looks to be a steady blue even though it's hashing.
Although I mostly run NewPacs now, I still have half a dozen 2Pacs, half of which have been in the same condition as yours for 6 or 8 months... `Not flashing, just hashing...' I know the blinking lights are nice, but mine are still hashing away, so I don't ever worry about them. If they stop hashing - then I'll worry.
|
The block, an obstacle in the path of the weak, became a stepping-stone in the path of the strong.
|
|
|
keichi
Newbie
Offline
Activity: 3
Merit: 0
|
|
March 06, 2019, 12:53:33 PM Last edit: March 06, 2019, 03:01:12 PM by keichi |
|
Hello A few weeks ago, I bought a Raspberry pi 3 B + and a Gekkoscience 2Pac. it worked well for a short time. Then nothing. I have already updated and followed the manufacturer's instructions for installing Raspbian. Since the crash of Gekkoscience 2Pac, the cgminer always shows me that he can not find any chips. I use this following command to start tuning with the Gekkoscience 2Pac ./cgminer -o stratum+tcp://depool.ckpool.org:3333 -u 3LdYRu3ZRRW4PbCZ9FGhbddzfGxRScCnkB -p x --suggest-diff 32 --gekko-2pac-freq 25 I already did a "git pull". Here is what is marked in the terminal when it is launched cgminer version 4.11.1 - Started: [2019-03-06 13:39:22.575] -------------------------------------------------------------------------------- (5s):0.000 (1m):0.000 (5m):0.000 (15m):0.000 (avg):0.000h/s A:0 R:0 HW:0 WU:0.0/m Connected to depool.ckpool.org diff 10K with stratum as user 3LdYRu3ZRRW4PbCZ9F Block: 8c5edae1... Diff:6.07T Started: [13:39:22.576] Best share: 0 -------------------------------------------------------------------------------- [U]SB management [P]ool management [S]ettings [D]isplay options [Q]uit 0: BSD 10015069: | OFF -------------------------------------------------------------------------------- [2019-03-06 13:39:21.438] Network diff set to 196G [2019-03-06 13:39:21.640] Pool 0 difficulty changed to 10000 [2019-03-06 13:39:21.798] Pool 0 message: Authorised, welcome to ckpool.org 3LdYRu3ZRRW4PbCZ9FGhbddzfGxRScCnkB! [2019-03-06 13:39:21.798] Pool 0 stratum+tcp://depool.ckpool.org:3333 alive, testing stability [2019-03-06 13:39:21.799] Switching to pool 0 stratum+tcp://depool.ckpool.org:3333 [2019-03-06 13:39:22.519] BSD 0: 2Pac BM1384 Bitcoin Miner (10015069) [2019-03-06 13:39:22.574] BSD 0: found 0 chip(s) [2019-03-06 13:39:22.576] Network diff set to 6.07T [2019-03-06 13:39:22.576] Stratum from pool 0 detected new block at height 565902 I even tested on a more powerful PC and provided me with a usb hub https://www.amazon.com/gp/product/B00L2LK164 to be sure that the Gekkoscience 2Pac silk well allimented. The result is always the same. I thank you for your help and your patience.
|
|
|
|
gcanelson
Member
Offline
Activity: 110
Merit: 56
|
|
March 09, 2019, 04:12:35 AM |
|
Hello A few weeks ago, I bought a Raspberry pi 3 B + and a Gekkoscience 2Pac. it worked well for a short time. Then nothing. I have already updated and followed the manufacturer's instructions for installing Raspbian. Since the crash of Gekkoscience 2Pac, the cgminer always shows me that he can not find any chips. I use this following command to start tuning with the Gekkoscience 2Pac ./cgminer -o stratum+tcp://depool.ckpool.org:3333 -u 3LdYRu3ZRRW4PbCZ9FGhbddzfGxRScCnkB -p x --suggest-diff 32 --gekko-2pac-freq 25 cgminer is connecting to your pool. That's good. Your USB hub is one of the better ones... That's good. If everything was working well for you, it should be no difficulty for you to push to 200MHz or more (with sufficient cooling). Not finding any chips `might' be a dead miner, BUT... Before you consider returning the 2Pac (to the vendor you purchased from) I would try this... You are running it at 25MHz. That is extremely low for your equipment... maybe change it to 100MHz to see if you can `wake it up'. I've seen many times where these 2Pacs don't operate well if they are under-powered... 25MHz may not be asking for enough power to fuel your miner - so give 100MHz a try... if you have a USB or 12V fan to keep things cool, you won't hurt the 2Pac - even at 200MHz. Also, look back to the first few pages of this topic. It may be that the potentiometer needs to be adjusted back to its stock position. Also, try starting cgminer without your 2Pac plugged in. Sometimes hot-plugging a miner once cgminer is already running will be enough to get the miner started... You have many things yet to try before declaring your 2Pac dead... Good luck... And I hope one of these suggestions will help you.
|
The block, an obstacle in the path of the weak, became a stepping-stone in the path of the strong.
|
|
|
bitdigfun
Newbie
Offline
Activity: 31
Merit: 0
|
|
March 27, 2019, 01:02:31 PM |
|
how do you know if it's damaged? there's green light but it doesn't work anymore?
and how do you fix it?
|
|
|
|
gt_addict
|
|
March 27, 2019, 02:09:31 PM |
|
how do you know if it's damaged? there's green light but it doesn't work anymore?
and how do you fix it?
You need to provide a bit more information. What usb hub is it running on and have you tested the hub seperately? What voltage is the core? What freq was it running at? Has windows done any updates and changed the driver back again so may need to do zadig again? Any pictures of the back of the pcb to see any physical damage?
|
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
|