Bitcoin Forum
September 26, 2018, 02:11:15 AM *
News: ♦♦ New info! Bitcoin Core users absolutely must upgrade to previously-announced 0.16.3 [Torrent]. All Bitcoin users should temporarily trust confirmations slightly less. More info.
 
   Home   Help Search Donate Login Register  
Pages: « 1 ... 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 [74] 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 »
  Print  
Author Topic: GekkoScience 2Pac BM1384 Stickminer Official Support Thread  (Read 145961 times)
This is a self-moderated topic. If you do not want to be moderated by the person who started this topic, create a new topic.
a_troll_01
Newbie
*
Offline Offline

Activity: 5
Merit: 0


View Profile
January 20, 2018, 02:27:01 AM
 #1461

So I just purchased my first 2Pac miner, plugged it in and...nothing.  The LED on the back of the miner is green and the OS recognizes the device but it will not work with cgminer or BGMiner.  

The 1st thing I tried was purchasing a couple of powered hubs, both with output over 2.1a per port, and then I bought a HighRock cable.  Still nothing!  :-(

When running cgminer->USB management->L
Bus 1 Device 10 ID: 10c4:ea60 GekkoScience 2Pac BM1384 Bitcoin Miner inactive.  

Some specifics:
OS: Linux Mint 18.3 Cinnamon(3.6.7) 64 bit(fresh install)
CGMiner: v 4.10.8(fresh compile)
cmd line: ./cgminer -o {stuff} -u {myuserid} -p {gibberish} --gekko-2pac-freq 150

Any suggestions on things that I should try?

Thanks in advance!




You followed the instructions contained on the first post, right?

I believe I followed all of the instructions, including dumping Windows and install Linux.
- I downloaded the latest version of CGMiner & compiled it with the -enable-gekko parm
- I made sure that the Pac2 is receiving at least 2.1A(I now own 2 powered hubs and the HighRock cable)
- I started CGMiner with the -gekko-2pac-freq parm

Can I assume that the green led on the back of the 2Pac indicates that has enough power to operate properly?
1537927875
Hero Member
*
Offline Offline

Posts: 1537927875

View Profile Personal Message (Offline)

Ignore
1537927875
Reply with quote  #2

1537927875
Report to moderator
1537927875
Hero Member
*
Offline Offline

Posts: 1537927875

View Profile Personal Message (Offline)

Ignore
1537927875
Reply with quote  #2

1537927875
Report to moderator
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
1537927875
Hero Member
*
Offline Offline

Posts: 1537927875

View Profile Personal Message (Offline)

Ignore
1537927875
Reply with quote  #2

1537927875
Report to moderator
a_troll_01
Newbie
*
Offline Offline

Activity: 5
Merit: 0


View Profile
January 20, 2018, 02:39:01 AM
 #1462

So I just purchased my first 2Pac miner, plugged it in and...nothing.  The LED on the back of the miner is green and the OS recognizes the device but it will not work with cgminer or BGMiner.  

The 1st thing I tried was purchasing a couple of powered hubs, both with output over 2.1a per port, and then I bought a HighRock cable.  Still nothing!  :-(

When running cgminer->USB management->L
Bus 1 Device 10 ID: 10c4:ea60 GekkoScience 2Pac BM1384 Bitcoin Miner inactive.  

Some specifics:
OS: Linux Mint 18.3 Cinnamon(3.6.7) 64 bit(fresh install)
CGMiner: v 4.10.8(fresh compile)
cmd line: ./cgminer -o {stuff} -u {myuserid} -p {gibberish} --gekko-2pac-freq 150

Any suggestions on things that I should try?

Thanks in advance!




Have you tried adding the hotplug to the command line (--hotplug n [interval in seconds]),
restart cgminer & wait for it to initialize (hub plugged in, but no miners), then plug one stick in @ a time?  
This has worked for me with more than 2Pacs.

I just gave that a try and turned on the Verbose display setting.
There is a Device serial GS-10017626 not responding.  Is that the 2Pac?

Also, if I start cgminer with -n parameter, it lists the 2Pac as USB dev 0 but I can't enable it.  very strange

Thanks for your help.
goose1072
Full Member
***
Offline Offline

Activity: 236
Merit: 100


View Profile
January 20, 2018, 03:15:53 AM
 #1463


This is what you should be using for Windows:

cross-compiled cgminer.exe binaries

Apr 29, 2017 @ 495461c - cgminer-4.10.0-windows-gekko-495461c.7z

Install the zadig generic WinUSB drivers

http://zadig.akeo.ie


The USB drivers is probably what you are missing.
marousi
Newbie
*
Offline Offline

Activity: 129
Merit: 0


View Profile
January 20, 2018, 07:43:15 AM
 #1464

I also discovered that the powered usb hubs cannot be daisy chained. They must be plugged directly into the PC's usb ports.
der_wasi
Member
**
Offline Offline

Activity: 111
Merit: 10


View Profile WWW
January 20, 2018, 12:02:55 PM
 #1465

So I just purchased my first 2Pac miner, plugged it in and...nothing.  The LED on the back of the miner is green and the OS recognizes the device but it will not work with cgminer or BGMiner.  

The 1st thing I tried was purchasing a couple of powered hubs, both with output over 2.1a per port, and then I bought a HighRock cable.  Still nothing!  :-(

When running cgminer->USB management->L
Bus 1 Device 10 ID: 10c4:ea60 GekkoScience 2Pac BM1384 Bitcoin Miner inactive.  

Some specifics:
OS: Linux Mint 18.3 Cinnamon(3.6.7) 64 bit(fresh install)
CGMiner: v 4.10.8(fresh compile)
cmd line: ./cgminer -o {stuff} -u {myuserid} -p {gibberish} --gekko-2pac-freq 150

Any suggestions on things that I should try?

Thanks in advance!
On what positition is your voltage pot? There´s a flat side. Try turning it to 1 or 2 o´clock. 2.1 A is not very much. But usuallly it should start mining a little bit until it goes zombie. And better start with 100 MHz. If that works you can increase.
If that all doesn´t work try raspbian os with the exact commands from post #1. I´m not sure what llinux mint is built on. With a debian distribution like raspbian it definitely works.

a_troll_01
Newbie
*
Offline Offline

Activity: 5
Merit: 0


View Profile
January 20, 2018, 01:23:49 PM
 #1466


This is what you should be using for Windows:

cross-compiled cgminer.exe binaries

Apr 29, 2017 @ 495461c - cgminer-4.10.0-windows-gekko-495461c.7z

Install the zadig generic WinUSB drivers

http://zadig.akeo.ie


The USB drivers is probably what you are missing.

I had that as my original installation, including the zadig.akeo.ie USB driver utility, but I couldn't get it to work.  I read a post saying that if you are having issues switch to Linux which is what I did.
a_troll_01
Newbie
*
Offline Offline

Activity: 5
Merit: 0


View Profile
January 20, 2018, 01:33:41 PM
 #1467

So I just purchased my first 2Pac miner, plugged it in and...nothing.  The LED on the back of the miner is green and the OS recognizes the device but it will not work with cgminer or BGMiner.  

The 1st thing I tried was purchasing a couple of powered hubs, both with output over 2.1a per port, and then I bought a HighRock cable.  Still nothing!  :-(

When running cgminer->USB management->L
Bus 1 Device 10 ID: 10c4:ea60 GekkoScience 2Pac BM1384 Bitcoin Miner inactive.  

Some specifics:
OS: Linux Mint 18.3 Cinnamon(3.6.7) 64 bit(fresh install)
CGMiner: v 4.10.8(fresh compile)
cmd line: ./cgminer -o {stuff} -u {myuserid} -p {gibberish} --gekko-2pac-freq 150

Any suggestions on things that I should try?

Thanks in advance!
On what positition is your voltage pot? There´s a flat side. Try turning it to 1 or 2 o´clock. 2.1 A is not very much. But usuallly it should start mining a little bit until it goes zombie. And better start with 100 MHz. If that works you can increase.
If that all doesn´t work try raspbian os with the exact commands from post #1. I´m not sure what llinux mint is built on. With a debian distribution like raspbian it definitely works.

My voltage pot?  I'm not really sure how to determine that voltage setting but I assume it's whatever the factory default is.
der_wasi
Member
**
Offline Offline

Activity: 111
Merit: 10


View Profile WWW
January 20, 2018, 02:01:22 PM
 #1468

Like I said, it has a flat side. This side schould be set to about 3 o`clock. You can try turning it counter clockwise to 2 or 1 o´clock.
But I think the problem is your os. If you are mining on a raspberry pi, then use raspbian. There is a discription for that on post #1. Otherwise use ubuntu. There´s a discription, too. And use all commands exactly like written there. And of course use cgminer from the git folder on post #1 either.

paulus59
Newbie
*
Offline Offline

Activity: 215
Merit: 0


View Profile
January 20, 2018, 02:22:08 PM
 #1469

hello guys  i have also some troubles here,

first i read the whole post 1 ,

installed the latest cgminer windows version 4.10.0

installed zadig windows driver and installation went oke, i see my 2 pac, now in cg miner i use this line

-> cgminer.exe  -o stratum+tcp://eu.multipool.us:3337 -u kripau.1 -p x  


without the freq settings like : --gekko-2pac-freq 150  

si it is just standard but wen i start the miner all i see is this :   http://i63.tinypic.com/zmf9xu.jpg
and the cursus is just blinking upper left corner

i dont get any accepted? , what i see by others here on the forum posts

i have a powered hub 3 amp plus cooler
green light at the back of the 2 pac and sometimes flickering
could some one point me to the direction pls

[edit]
 
after some time i let cgminer run i see this : Accepted 0ccd5c51 Diff 5.12K/2048 BSD 0

so i see now 1 accepted is that correct ? that should go faster or do i miss here some things  in settings ? ;-)




vh
Hero Member
*****
Offline Offline

Activity: 605
Merit: 554


View Profile
January 20, 2018, 03:14:51 PM
 #1470


[edit]
 
after some time i let cgminer run i see this : Accepted 0ccd5c51 Diff 5.12K/2048 BSD 0

so i see now 1 accepted is that correct ? that should go faster or do i miss here some things  in settings ? ;-)



Most pools use manual and variable difficulty settings per worker.   
Sounds like this pools start off at 2048 for the miner.
If there is a manual setting on the interface, you can set the worker to their lowest value or about 32-ish.
With vardiff, the pool will sense the gap between your accepted shares and adjust it over time.

It doesn't make much difference mathematically since that 5120(5.12K) share there is like a 160 x 32 diff shares.
You just get to see the Accepted message more often.

lok8nusa
Member
**
Offline Offline

Activity: 252
Merit: 11

Call 811 before you dig


View Profile
January 20, 2018, 03:15:14 PM
 #1471


Quote
so i see now 1 accepted is that correct ? that should go faster or do i miss here some things  in settings ? ;-)


 You successfully started your miner with cgminer's default settings. That's what the screen output looks like.

Congratulations, and keep on mining!


Edit: Of course, now that it runs, you may want to experiment with various command-line settings or hardware adjustments (voltage).
All that info is in this forum, too.  Have fun!

Coining bits since 2017 
Avalon 741 x 2; BM S7 x 1, C1 x 1, S3 x 1; GekkoScience R808 x 2, 2Pac x 8
Kano Pool is the BEST BTC mining pool.
marousi
Newbie
*
Offline Offline

Activity: 129
Merit: 0


View Profile
January 20, 2018, 03:25:56 PM
 #1472

what does the "white light" mean on the 2pac? Burned out?
paulus59
Newbie
*
Offline Offline

Activity: 215
Merit: 0


View Profile
January 20, 2018, 06:35:36 PM
 #1473


[edit]
 
after some time i let cgminer run i see this : Accepted 0ccd5c51 Diff 5.12K/2048 BSD 0

so i see now 1 accepted is that correct ? that should go faster or do i miss here some things  in settings ? ;-)



Most pools use manual and variable difficulty settings per worker.  
Sounds like this pools start off at 2048 for the miner.
If there is a manual setting on the interface, you can set the worker to their lowest value or about 32-ish.
With vardiff, the pool will sense the gap between your accepted shares and adjust it over time.

It doesn't make much difference mathematically since that 5120(5.12K) share there is like a 160 x 32 diff shares.
You just get to see the Accepted message more often.


thank you for explanation , it is clear for me ,  i let it run for some time now about 2 ours at 150 mhz i did not alter the voltage on the 2pac after 2 ours i get 8 hw errors in cgminer , not bad right ?

sample screenshot after 2 ours running cgminer :  BSD 10014510: COMPAC-2 150.00MHz HW:10 | 14.38G / 16.58Gh/s WU:231.2/m

btw what is the green / white light on the 2 pac ?


sidehack
Legendary
*
Online Online

Activity: 1820
Merit: 1151

Curmudgeonly hardware guy


View Profile
January 20, 2018, 07:02:52 PM
 #1474

When testing, I try to shoot for fewer than 2 HW per hour at 100MHz and stock voltage. That's just my own standard for what I'm willing to ship. 4 an hour at 150MHz isn't bad. I forget the formula offhand for figuring percent errors, but as long as your hashrate is about what's expected you probably won't have any trouble.

The green light is tied directly to 5V. Basically just tells you the thing's getting power. The white is linked into the comm lines and flashes every time the chips respond with a nonce. So flashing means it's hashing away. Solid white generally indicates one of your chips is hosed up.

paulus59
Newbie
*
Offline Offline

Activity: 215
Merit: 0


View Profile
January 20, 2018, 07:18:22 PM
 #1475

When testing, I try to shoot for fewer than 2 HW per hour at 100MHz and stock voltage. That's just my own standard for what I'm willing to ship. 4 an hour at 150MHz isn't bad. I forget the formula offhand for figuring percent errors, but as long as your hashrate is about what's expected you probably won't have any trouble.

The green light is tied directly to 5V. Basically just tells you the thing's getting power. The white is linked into the comm lines and flashes every time the chips respond with a nonce. So flashing means it's hashing away. Solid white generally indicates one of your chips is hosed up.


thank you for this info ! ;-)
DeeMiner
Newbie
*
Offline Offline

Activity: 5
Merit: 1


View Profile
January 21, 2018, 01:59:59 AM
 #1476

Trying to get cgminer working on a Rock64 running Diet Pi.  Getting stuck when trying to run:

Code:
CFLAGS="-02" ./autogen.sh --enable-geko

Checking config.log gave me:
Code:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by cgminer configure 4.10.0, which was
generated by GNU Autoconf 2.69.  Invocation command line was

  $ /root/git/vthoang/cgminer/configure --enable-gekko

## --------- ##
## Platform. ##
## --------- ##

hostname = DietPi
uname -m = aarch64
uname -r = 4.4.77-rockchip-ayufan-118
uname -s = Linux
uname -v = #1 SMP Thu Sep 14 21:59:24 UTC 2017

/usr/bin/uname -p = unknown
/bin/uname -X     = unknown

/bin/arch              = unknown
/usr/bin/arch -k       = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo      = unknown
/bin/machine           = unknown
/usr/bin/oslevel       = unknown
/bin/universe          = unknown

PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin


## ----------- ##
## Core tests. ##
## ----------- ##

configure:2910: checking build system type
configure:2924: result: aarch64-unknown-linux-gnu
configure:2944: checking host system type
configure:2957: result: aarch64-unknown-linux-gnu
configure:2977: checking target system type
configure:2990: result: aarch64-unknown-linux-gnu
configure:3038: checking for a BSD-compatible install
configure:3106: result: /usr/bin/install -c
configure:3117: checking whether build environment is sane
configure:3172: result: yes
configure:3323: checking for a thread-safe mkdir -p
configure:3362: result: /bin/mkdir -p
configure:3370: checking for gawk
configure:3400: result: no
configure:3370: checking for mawk
configure:3386: found /usr/bin/mawk
configure:3397: result: mawk
configure:3408: checking whether make sets $(MAKE)
configure:3430: result: yes
configure:3459: checking whether make supports nested variables
configure:3476: result: yes
configure:3613: checking whether make supports nested variables
configure:3630: result: yes
configure:3653: checking for style of include used by make
configure:3681: result: GNU
configure:3752: checking for gcc
configure:3768: found /usr/bin/gcc
configure:3779: result: gcc
configure:4008: checking for C compiler version
configure:4017: gcc --version >&5
gcc (Debian 6.3.0-18) 6.3.0 20170516
Copyright (C) 2016 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

configure:4028: $? = 0
configure:4017: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/aarch64-linux-gnu/6/lto-wrapper
Target: aarch64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Debian 6.3.0-18' --with-bugurl=file:///usr/share/doc/gcc-6/README.Bugs --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-6 --program-prefix=aarch64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-libquadmath --enable-plugin --enable-default-pie --with-system-zlib --disable-browser-plugin --enable-java-awt=gtk --enable-gtk-cairo --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-6-arm64/jre --enable-java-home --with-jvm-root-dir=/usr/lib/jvm/java-1.5.0-gcj-6-arm64 --with-jvm-jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-6-arm64 --with-arch-directory=aarch64 --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-multiarch --enable-fix-cortex-a53-843419 --enable-checking=release --build=aarch64-linux-gnu --host=aarch64-linux-gnu --target=aarch64-linux-gnu
Thread model: posix
gcc version 6.3.0 20170516 (Debian 6.3.0-18)
configure:4028: $? = 0
configure:4017: gcc -V >&5
gcc: error: unrecognized command line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:4028: $? = 1
configure:4017: gcc -qversion >&5
gcc: error: unrecognized command line option '-qversion'; did you mean '--version'?
gcc: fatal error: no input files
compilation terminated.
configure:4028: $? = 1
configure:4048: checking whether the C compiler works
configure:4070: gcc -02   conftest.c  >&5
gcc: error: unrecognized command line option '-02'
configure:4074: $? = 1
configure:4112: result: no
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "cgminer"
| #define PACKAGE_TARNAME "cgminer"
| #define PACKAGE_VERSION "4.10.0"
| #define PACKAGE_STRING "cgminer 4.10.0"
| #define PACKAGE_BUGREPORT "kernel@kolivas.org"
| #define PACKAGE_URL ""
| #define PACKAGE "cgminer"
| #define VERSION "4.10.0"
| /* end confdefs.h.  */
|
| int
| main ()
| {
|
|   ;
|   return 0;
| }
configure:4117: error: in `/root/git/vthoang/cgminer':
configure:4119: error: C compiler cannot create executables
See `config.log' for more details

## ---------------- ##
## Cache variables. ##
## ---------------- ##

ac_cv_build=aarch64-unknown-linux-gnu
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value=-02
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_JANSSON_CFLAGS_set=
ac_cv_env_JANSSON_CFLAGS_value=
ac_cv_env_JANSSON_LIBS_set=
ac_cv_env_JANSSON_LIBS_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_LIBCURL_CFLAGS_set=
ac_cv_env_LIBCURL_CFLAGS_value=
ac_cv_env_LIBCURL_LIBS_set=
ac_cv_env_LIBCURL_LIBS_value=
ac_cv_env_LIBSYSTEMD_CFLAGS_set=
ac_cv_env_LIBSYSTEMD_CFLAGS_value=
ac_cv_env_LIBSYSTEMD_LIBS_set=
ac_cv_env_LIBSYSTEMD_LIBS_value=
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_LIBUSB_CFLAGS_set=
ac_cv_env_LIBUSB_CFLAGS_value=
ac_cv_env_LIBUSB_LIBS_set=
ac_cv_env_LIBUSB_LIBS_value=
ac_cv_env_PKG_CONFIG_LIBDIR_set=
ac_cv_env_PKG_CONFIG_LIBDIR_value=
ac_cv_env_PKG_CONFIG_PATH_set=
ac_cv_env_PKG_CONFIG_PATH_value=
ac_cv_env_PKG_CONFIG_set=
ac_cv_env_PKG_CONFIG_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_host=aarch64-unknown-linux-gnu
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/bin/mkdir
ac_cv_prog_AWK=mawk
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_make_make_set=yes
ac_cv_target=aarch64-unknown-linux-gnu
am_cv_make_support_nested_variables=yes

## ----------------- ##
## Output variables. ##
## ----------------- ##

ACLOCAL='${SHELL} /root/git/vthoang/cgminer/missing aclocal-1.15'
ALLOCA=''
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='$${TAR-tar}'
AM_BACKSLASH='\'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
AM_DEFAULT_VERBOSITY='0'
AM_V='$(V)'
APPLE_UNIVERSAL_BUILD=''
AUTOCONF='${SHELL} /root/git/vthoang/cgminer/missing autoconf'
AUTOHEADER='${SHELL} /root/git/vthoang/cgminer/missing autoheader'
AUTOMAKE='${SHELL} /root/git/vthoang/cgminer/missing automake-1.15'
AWK='mawk'
BITSIZEOF_PTRDIFF_T=''
BITSIZEOF_SIG_ATOMIC_T=''
BITSIZEOF_SIZE_T=''
BITSIZEOF_WCHAR_T=''
BITSIZEOF_WINT_T=''
CC='gcc'
CCDEPMODE=''
CFLAGS='-02'
CPP=''
CPPFLAGS=''
CYGPATH_W='echo'
DEFS=''
DEPDIR='.deps'
DLOPEN_FLAGS=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
EXEEXT=''
GL_COND_LIBTOOL_FALSE=''
GL_COND_LIBTOOL_TRUE=''
GL_GENERATE_STDDEF_H_FALSE=''
GL_GENERATE_STDDEF_H_TRUE=''
GL_GENERATE_STDINT_H_FALSE=''
GL_GENERATE_STDINT_H_TRUE=''
GNULIB_MBSCASECMP=''
GNULIB_MBSCASESTR=''
GNULIB_MBSCHR=''
GNULIB_MBSCSPN=''
GNULIB_MBSLEN=''
GNULIB_MBSNCASECMP=''
GNULIB_MBSNLEN=''
GNULIB_MBSPBRK=''
GNULIB_MBSPCASECMP=''
GNULIB_MBSRCHR=''
GNULIB_MBSSEP=''
GNULIB_MBSSPN=''
GNULIB_MBSSTR=''
GNULIB_MBSTOK_R=''
GNULIB_MEMCHR=''
GNULIB_MEMMEM=''
GNULIB_MEMPCPY=''
GNULIB_MEMRCHR=''
GNULIB_RAWMEMCHR=''
GNULIB_SIGACTION=''
GNULIB_SIGNAL_H_SIGPIPE=''
GNULIB_SIGPROCMASK=''
GNULIB_STPCPY=''
GNULIB_STPNCPY=''
GNULIB_STRCASESTR=''
GNULIB_STRCHRNUL=''
GNULIB_STRDUP=''
GNULIB_STRERROR=''
GNULIB_STRERROR_R=''
GNULIB_STRNCAT=''
GNULIB_STRNDUP=''
GNULIB_STRNLEN=''
GNULIB_STRPBRK=''
GNULIB_STRSEP=''
GNULIB_STRSIGNAL=''
GNULIB_STRSTR=''
GNULIB_STRTOK_R=''
GNULIB_STRVERSCMP=''
GREP=''
HAS_ANT_S1_FALSE=''
HAS_ANT_S1_TRUE=''
HAS_ANT_S2_FALSE=''
HAS_ANT_S2_TRUE=''
HAS_ANT_S3_FALSE=''
HAS_ANT_S3_TRUE=''
HAS_AVALON2_FALSE=''
HAS_AVALON2_TRUE=''
HAS_AVALON4_FALSE=''
HAS_AVALON4_TRUE=''
HAS_AVALON7_FALSE=''
HAS_AVALON7_TRUE=''
HAS_AVALON_FALSE=''
HAS_AVALON_MINER_FALSE=''
HAS_AVALON_MINER_TRUE=''
HAS_AVALON_TRUE=''
HAS_BAB_FALSE=''
HAS_BAB_TRUE=''
HAS_BFLSC_FALSE=''
HAS_BFLSC_TRUE=''
HAS_BITFORCE_FALSE=''
HAS_BITFORCE_TRUE=''
HAS_BITFURY16_FALSE=''
HAS_BITFURY16_TRUE=''
HAS_BITFURY_FALSE=''
HAS_BITFURY_TRUE=''
HAS_BITMINE_A1_FALSE=''
HAS_BITMINE_A1_TRUE=''
HAS_BLOCKERUPTER_FALSE=''
HAS_BLOCKERUPTER_TRUE=''
HAS_COINTERRA_FALSE=''
HAS_COINTERRA_TRUE=''
HAS_DRILLBIT_FALSE=''
HAS_DRILLBIT_TRUE=''
HAS_GEKKO_FALSE=''
HAS_GEKKO_TRUE=''
HAS_HASHFAST_FALSE=''
HAS_HASHFAST_TRUE=''
HAS_HASHRATIO_FALSE=''
HAS_HASHRATIO_TRUE=''
HAS_ICARUS_FALSE=''
HAS_ICARUS_TRUE=''
HAS_KLONDIKE_FALSE=''
HAS_KLONDIKE_TRUE=''
HAS_KNC_FALSE=''
HAS_KNC_TRUE=''
HAS_MINION_FALSE=''
HAS_MINION_TRUE=''
HAS_MODMINER_FALSE=''
HAS_MODMINER_TRUE=''
HAS_SP10_FALSE=''
HAS_SP10_TRUE=''
HAS_SP30_FALSE=''
HAS_SP30_TRUE=''
HAVE_CURSES_FALSE=''
HAVE_CURSES_TRUE=''
HAVE_DECL_MEMMEM=''
HAVE_DECL_MEMRCHR=''
HAVE_DECL_STRDUP=''
HAVE_DECL_STRERROR_R=''
HAVE_DECL_STRNDUP=''
HAVE_DECL_STRNLEN=''
HAVE_DECL_STRSIGNAL=''
HAVE_DECL_STRTOK_R=''
HAVE_INTTYPES_H=''
HAVE_LONG_LONG_INT=''
HAVE_MBSLEN=''
HAVE_MEMCHR=''
HAVE_MEMPCPY=''
HAVE_POSIX_SIGNALBLOCKING=''
HAVE_RAWMEMCHR=''
HAVE_SIGACTION=''
HAVE_SIGHANDLER_T=''
HAVE_SIGINFO_T=''
HAVE_SIGNED_SIG_ATOMIC_T=''
HAVE_SIGNED_WCHAR_T=''
HAVE_SIGNED_WINT_T=''
HAVE_SIGSET_T=''
HAVE_STDINT_H=''
HAVE_STPCPY=''
HAVE_STPNCPY=''
HAVE_STRCASESTR=''
HAVE_STRCHRNUL=''
HAVE_STRPBRK=''
HAVE_STRSEP=''
HAVE_STRUCT_SIGACTION_SA_SIGACTION=''
HAVE_STRVERSCMP=''
HAVE_SYS_BITYPES_H=''
HAVE_SYS_INTTYPES_H=''
HAVE_SYS_TYPES_H=''
HAVE_TYPE_VOLATILE_SIG_ATOMIC_T=''
HAVE_UNSIGNED_LONG_LONG_INT=''
HAVE_WCHAR_H=''
HAVE_WCHAR_T=''
HAVE_WINDOWS_FALSE=''
HAVE_WINDOWS_TRUE=''
HAVE_x86_64_FALSE=''
HAVE_x86_64_TRUE=''
INCLUDE_NEXT=''
INCLUDE_NEXT_AS_FIRST_DIRECTIVE=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
JANSSON_CFLAGS=''
JANSSON_LIBS=''
LDFLAGS=''
LIBCURL_CFLAGS=''
LIBCURL_LIBS=''
LIBGNU_LIBDEPS=''
LIBGNU_LTLIBDEPS=''
LIBOBJS=''
LIBS=''
LIBSYSTEMD_CFLAGS=''
LIBSYSTEMD_LIBS=''
LIBUSB_CFLAGS=''
LIBUSB_LIBS=''
LTLIBOBJS=''
MAINT=''
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE=''
MAKEINFO='${SHELL} /root/git/vthoang/cgminer/missing makeinfo'
MATH_LIBS=''
MKDIR_P='/bin/mkdir -p'
MM_LIBS=''
NCURSES_LIBS=''
NEED_FPGAUTILS_FALSE=''
NEED_FPGAUTILS_TRUE=''
NEED_I2C_CONTEXT_FALSE=''
NEED_I2C_CONTEXT_TRUE=''
NEXT_AS_FIRST_DIRECTIVE_SIGNAL_H=''
NEXT_AS_FIRST_DIRECTIVE_STDDEF_H=''
NEXT_AS_FIRST_DIRECTIVE_STDINT_H=''
NEXT_AS_FIRST_DIRECTIVE_STRING_H=''
NEXT_SIGNAL_H=''
NEXT_STDDEF_H=''
NEXT_STDINT_H=''
NEXT_STRING_H=''
OBJEXT=''
PACKAGE='cgminer'
PACKAGE_BUGREPORT='kernel@kolivas.org'
PACKAGE_NAME='cgminer'
PACKAGE_STRING='cgminer 4.10.0'
PACKAGE_TARNAME='cgminer'
PACKAGE_URL=''
PACKAGE_VERSION='4.10.0'
PATH_SEPARATOR=':'
PDCURSES_LIBS=''
PKG_CONFIG=''
PKG_CONFIG_LIBDIR=''
PKG_CONFIG_PATH=''
PRAGMA_COLUMNS=''
PRAGMA_SYSTEM_HEADER=''
PTHREAD_FLAGS=''
PTHREAD_LIBS=''
PTRDIFF_T_SUFFIX=''
RANLIB=''
REPLACE_MEMCHR=''
REPLACE_MEMMEM=''
REPLACE_NULL=''
REPLACE_STPNCPY=''
REPLACE_STRCASESTR=''
REPLACE_STRCHRNUL=''
REPLACE_STRDUP=''
REPLACE_STRERROR=''
REPLACE_STRERROR_R=''
REPLACE_STRNCAT=''
REPLACE_STRNDUP=''
REPLACE_STRNLEN=''
REPLACE_STRSIGNAL=''
REPLACE_STRSTR=''
REPLACE_STRTOK_R=''
RT_LIBS=''
SET_MAKE=''
SHELL='/bin/bash'
SIG_ATOMIC_T_SUFFIX=''
SIZE_T_SUFFIX=''
STATIC_CURL_FALSE=''
STATIC_CURL_TRUE=''
STDDEF_H=''
STDINT_H=''
STRIP=''
UNDEFINE_STRTOK_R=''
VERSION='4.10.0'
VMAJ=''
WANT_CRC16_FALSE=''
WANT_CRC16_TRUE=''
WANT_LIBBITFURY_FALSE=''
WANT_LIBBITFURY_TRUE=''
WANT_STATIC_JANSSON_FALSE=''
WANT_STATIC_JANSSON_TRUE=''
WANT_USBUTILS_FALSE=''
WANT_USBUTILS_TRUE=''
WCHAR_T_SUFFIX=''
WINT_T_SUFFIX=''
WS2_LIBS=''
ac_ct_CC='gcc'
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__include='include'
am__isrc=''
am__leading_dot='.'
am__nodep='_no'
am__quote=''
am__tar='$${TAR-tar} chof - "$$tardir"'
am__untar='$${TAR-tar} xf -'
bindir='${exec_prefix}/bin'
build='aarch64-unknown-linux-gnu'
build_alias=''
build_cpu='aarch64'
build_os='linux-gnu'
build_vendor='unknown'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
gl_LIBOBJS=''
gl_LTLIBOBJS=''
gltests_LIBOBJS=''
gltests_LTLIBOBJS=''
gltests_WITNESS=''
host='aarch64-unknown-linux-gnu'
host_alias=''
host_cpu='aarch64'
host_os='linux-gnu'
host_vendor='unknown'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /root/git/vthoang/cgminer/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='$(MKDIR_P)'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='NONE'
program_transform_name='s,x,x,'
psdir='${docdir}'
release_info=''
runstatedir='${localstatedir}/run'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
subdirs=''
sysconfdir='${prefix}/etc'
target='aarch64-unknown-linux-gnu'
target_alias=''
target_cpu='aarch64'
target_os='linux-gnu'
target_vendor='unknown'
version_info=''

## ----------- ##
## confdefs.h. ##
## ----------- ##

/* confdefs.h */
#define PACKAGE_NAME "cgminer"
#define PACKAGE_TARNAME "cgminer"
#define PACKAGE_VERSION "4.10.0"
#define PACKAGE_STRING "cgminer 4.10.0"
#define PACKAGE_BUGREPORT "kernel@kolivas.org"
#define PACKAGE_URL ""
#define PACKAGE "cgminer"
#define VERSION "4.10.0"

configure: exit 77

I'm quite noob so I don't really understand why I'm stuck.  May try a new OS later. Any help/input is appreciated
sidehack
Legendary
*
Online Online

Activity: 1820
Merit: 1151

Curmudgeonly hardware guy


View Profile
January 21, 2018, 02:08:11 AM
 #1477

Quote
gcc: error: unrecognized command line option '-02'

I'm gonna guess...

Just making sure it's being read correctly, the "-O2" is dash oh two, not dash zero two.

DeeMiner
Newbie
*
Offline Offline

Activity: 5
Merit: 1


View Profile
January 21, 2018, 03:13:22 AM
 #1478

That would be it, apparently need to go back and work on my abc's and 123's.

Thanks for the help !
sidehack
Legendary
*
Online Online

Activity: 1820
Merit: 1151

Curmudgeonly hardware guy


View Profile
January 21, 2018, 03:19:16 AM
 #1479

Yeah it's pretty common and easy to miss. I still make that error myself on occasion.

paulus59
Newbie
*
Offline Offline

Activity: 215
Merit: 0


View Profile
January 22, 2018, 08:33:16 AM
 #1480

hey guys,

litle update on my 2 pac the black one , europe

following is just as it arrived, without any adjustments made :

running now 1 1/2 day on 112.50 mhz  at 12.15Ghz without errors, look here http://i65.tinypic.com/2qjw09s.jpg

with this settings : cgminer -o stratum+tcp://eu.multipool.us:3343 -u myusername -p x  --suggest-diff 32 --gekko-2pac-freq 110

today i am want to adjust the voltage, how do i do that ? very little turning the voltage on the 2pac ?

btw after some resource and checking my USB devices and versions i saw that this 2pac is :

USB Version Supported: 1.10

USB Device Speed:  USB 1.1 Full-speed

i tough that this would be minimal v2.0 or even usb v3.0 ,

how ever, could i get some direction points how to set the voltage ;-)  


thanks in advanced




Pages: « 1 ... 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 [74] 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 »
  Print  
 
Jump to:  

Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!