minerstat: mining OS + ASIC monitoring + Windows mining

[VyprBTC]

coinscrow i know you're trying to make the site look cool but my suggestion is take the floating images that just float around. it was cool for about 5 seconds 20 years ago, not so much any more. i actually thought i had dirt or something crawling on my screen for a second till i realized i was in a time warp back to the 90's

i just tired, i found cool for few minutes after i realised it's very drop the performance of the site.. so no more bg effect 

yes, page loads noticeably faster without it!

[br2459]

Anyone else having a connectivity issue to the website?

[FFI2013]

Anyone else having a connectivity issue to the website?

yes having trouble

[npittas]

Yeah page is down...as I was trying to set up dual mining...

An ETA would be nice

[magnoman]

Yeah page is down...as I was trying to set up dual mining...

An ETA would be nice

It's the middle of the night where Coinscrow is.  Might be a few hours unless he's awake.

[cryptominer420]

Would be nice to have a local Master Node type setup were we load a local master node which our individual rigs connect to.
Setup would be like

Master node
Web interface for changing rig setting like there is currently on the website
and it will sync settings to the website
It also has a sync from web function were we can configure a new node on the website and then sync it's settings to the master node.
Syncs rig statistics to the website

Slave node
Receives configs, Profitability Etc from the master node
Runs miners

This type of setup could prevent many issues in the case were the website is down or under DDOS ETC. It would also reduce bandwidth usage for the webserver.

[coinscrow]

Yeah page is down...as I was trying to set up dual mining...

An ETA would be nice

It's the middle of the night where Coinscrow is.  Might be a few hours unless he's awake.

i was avake, but i didn't notice it.. i need to troubleshoot what happend

@cryptominer420 like it

[Jamievs]

I have a question regagarding DCR. I have been using stratum+tcp://yiimp.ccminer.org:3252 and my wallet address and been happily mining on and off using the ALGO. Lately more and more the pool is full and my workers wont connect. So I want to swap to https://dcr.suprnova.cc. But they say they need a weblogin.worker. What do I enter in the Payout Address on the adresseditor here; https://minerstat.com/addresseditor.html ? Do I do weblogin.(worker) as payout adress and make workers in the suprnova portal which are equal to the (worker)'s I have?

[coinscrow]

I have a question regagarding DCR. I have been using stratum+tcp://yiimp.ccminer.org:3252 and my wallet address and been happily mining on and off using the ALGO. Lately more and more the pool is full and my workers wont connect. So I want to swap to https://dcr.suprnova.cc. But they say they need a weblogin.worker. What do I enter in the Payout Address on the adresseditor here; https://minerstat.com/addresseditor.html ? Do I do weblogin.(worker) as payout adress and make workers in the suprnova portal which are equal to the (worker)'s I have?

YEs the yiimp is always full, the suprnova is a good alternative.

weblogin.(WORKER)

and in the supernova add your workername same as on the minerstat dashboard.

[FFI2013]

I have a question regagarding DCR. I have been using stratum+tcp://yiimp.ccminer.org:3252 and my wallet address and been happily mining on and off using the ALGO. Lately more and more the pool is full and my workers wont connect. So I want to swap to https://dcr.suprnova.cc. But they say they need a weblogin.worker. What do I enter in the Payout Address on the adresseditor here; https://minerstat.com/addresseditor.html ? Do I do weblogin.(worker) as payout adress and make workers in the suprnova portal which are equal to the (worker)'s I have?

YEs the yiimp is always full, the suprnova is a good alternative.

weblogin.(WORKER)

and in the supernova add your workername same as on the minerstat dashboard.

I'm dual mining and just switched from Eth to etc on miningpoolhub now the dashboard is saying I'm mining Eth and etc and sia stats are missing the pool is showing my sia miners but not the dashboard

[Jamievs]

I have a question regagarding DCR. I have been using stratum+tcp://yiimp.ccminer.org:3252 and my wallet address and been happily mining on and off using the ALGO. Lately more and more the pool is full and my workers wont connect. So I want to swap to https://dcr.suprnova.cc. But they say they need a weblogin.worker. What do I enter in the Payout Address on the adresseditor here; https://minerstat.com/addresseditor.html ? Do I do weblogin.(worker) as payout adress and make workers in the suprnova portal which are equal to the (worker)'s I have?

YEs the yiimp is always full, the suprnova is a good alternative.

weblogin.(WORKER)

and in the supernova add your workername same as on the minerstat dashboard.

Thanks, that's working 

[coinscrow]

I have a question regagarding DCR. I have been using stratum+tcp://yiimp.ccminer.org:3252 and my wallet address and been happily mining on and off using the ALGO. Lately more and more the pool is full and my workers wont connect. So I want to swap to https://dcr.suprnova.cc. But they say they need a weblogin.worker. What do I enter in the Payout Address on the adresseditor here; https://minerstat.com/addresseditor.html ? Do I do weblogin.(worker) as payout adress and make workers in the suprnova portal which are equal to the (worker)'s I have?

YEs the yiimp is always full, the suprnova is a good alternative.

weblogin.(WORKER)

and in the supernova add your workername same as on the minerstat dashboard.

I'm dual mining and just switched from Eth to etc on miningpoolhub now the dashboard is saying I'm mining Eth and etc and sia stats are missing the pool is showing my sia miners but not the dashboard

send me your accesskey to i can check it

[coinscrow]

⚠️ v3 - 003 released for testers

https://github.com/coinscrow/minerstat-windows/releases/tag/3.0-pre

Code:

Corrects an issue when the cpu miner closed after a miner switch.
Corrects an issue when the node crashed randomly.
Corrects an issue when the node crashed at startup.
Claymore-Dual Updated to v9.6
New miner: ccminer-alexis
New miner: genoil-eth (only hashrate sync)

bug report: report[ @ ]minerstat.com

[VyprBTC]

⚠️ v3 - 003 released for testers

https://github.com/coinscrow/minerstat-windows/releases/tag/3.0-pre

Code:

Corrects an issue when the cpu miner closed after a miner switch.
Corrects an issue when the node crashed randomly.
Corrects an issue when the node crashed at startup.
Claymore-Dual Updated to v9.6
New miner: ccminer-alexis
New miner: genoil-eth (only hashrate sync)

bug report: report[ @ ]minerstat.com

Is there a way to manually adjust the earnings because stats for DGB is way off -

https://dgb-skein.theblocksfactory.com/

[coinscrow]

⚠️ v3 - 003 released for testers

https://github.com/coinscrow/minerstat-windows/releases/tag/3.0-pre

Code:

Corrects an issue when the cpu miner closed after a miner switch.
Corrects an issue when the node crashed randomly.
Corrects an issue when the node crashed at startup.
Claymore-Dual Updated to v9.6
New miner: ccminer-alexis
New miner: genoil-eth (only hashrate sync)

bug report: report[ @ ]minerstat.com

Is there a way to manually adjust the earnings because stats for DGB is way off -

https://dgb-skein.theblocksfactory.com/

i think it should work with that pool now

[FFI2013]

I have a question regagarding DCR. I have been using stratum+tcp://yiimp.ccminer.org:3252 and my wallet address and been happily mining on and off using the ALGO. Lately more and more the pool is full and my workers wont connect. So I want to swap to https://dcr.suprnova.cc. But they say they need a weblogin.worker. What do I enter in the Payout Address on the adresseditor here; https://minerstat.com/addresseditor.html ? Do I do weblogin.(worker) as payout adress and make workers in the suprnova portal which are equal to the (worker)'s I have?

YEs the yiimp is always full, the suprnova is a good alternative.

weblogin.(WORKER)

and in the supernova add your workername same as on the minerstat dashboard.

I'm dual mining and just switched from Eth to etc on miningpoolhub now the dashboard is saying I'm mining Eth and etc and sia stats are missing the pool is showing my sia miners but not the dashboard

send me your accesskey to i can check it

just checking you want me to send you my access key and pm it I've been working all day so just seen this

I don't think I have the settings messed up im mining etc on mining pool hub yesterday when I tried to setup musicoin on my one rig with miningpoolhub it did the same thing as soon as I changed to a different musicoin pool it was back to normal showing music and sia on miningpoolhub it shows Eth and the real coin I'm mining

[VyprBTC]

⚠️ v3 - 003 released for testers

https://github.com/coinscrow/minerstat-windows/releases/tag/3.0-pre

Code:

Corrects an issue when the cpu miner closed after a miner switch.
Corrects an issue when the node crashed randomly.
Corrects an issue when the node crashed at startup.
Claymore-Dual Updated to v9.6
New miner: ccminer-alexis
New miner: genoil-eth (only hashrate sync)

bug report: report[ @ ]minerstat.com

Is there a way to manually adjust the earnings because stats for DGB is way off -

https://dgb-skein.theblocksfactory.com/

i think it should work with that pool now

Nope. Still says the 1 rig is making $200 a day. I do wish that were true lol

[Jamievs]

Hi Coinscrow,

I am working on builing my own statistics database based on the API. Can you please add versioning to your endpoint? Thanks

[killerelite]

Pls fix Dgb profitibility , It is showing too much

skein or groestl algo?
pool?
send me you accesskey in private

Was away for a few days , Anyways It was Skein algo and now its fixed , Thanks a Lot , This is an amazing tool , Waiting for nvidia Algo then i will be perfect

[Snipzz]

Iam using "cgminer" for mining DGB-Skein with AMD, can you add it, pls?