[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs

[philipma1957]

waiting for the


"sold out" sign on curent batches 

I want 1 more wait for me!!

[1713870328]

1713870328

[1713870328]

1713870328

[1713870328]

1713870328

[1713870328]

1713870328

[1713870328]

1713870328

[raskul]

waiting for the


"sold out" sign on curent batches 

I want 1 more wait for me!!

i can't until mmpool hits a block.

 

[philipma1957]

waiting for the


"sold out" sign on curent batches  

I want 1 more wait for me!!

i can't until mmpool hits a block.

 

I got one more with your link.  here is transaction id!

https://blockchain.info/tx/d331c82ad197ae0f3ecb0884dcaeb86233fb6e78a12752b2a7f2a1cdab45e1ce

I may buy 1 more tomorrow!


oh I am shooting 20 th at mmpool as I type for  a few more hours.

[wpgdeez]

I was specifically referring to barabara, who in the emails where i asked for a discount neglected to mention any sale and in fact advised me to buy asap...

would it not THEN have been logical to mention there is a sale starting imminently...?




OK, so will you (SPT) honor the 100USD discount seeing as my order is still    'pending & unfulfilled'   $940.00   ?





Yes, we will honor the $100. Please e-mail me at sales@spondoolies-tech.com.  Barbara

Barbara, I have a support ticket open with you. Why are you not replying to my emails, it has been 5 days now since your last and only reply advising me to try the SP20 firmware on my SP10?

[raskul]

waiting for the


"sold out" sign on curent batches  

I want 1 more wait for me!!

i can't until mmpool hits a block.

 

I got one more with your link.  here is transaction id!

https://blockchain.info/tx/d331c82ad197ae0f3ecb0884dcaeb86233fb6e78a12752b2a7f2a1cdab45e1ce

I may buy 1 more tomorrow!


oh I am shooting 20 th at mmpool as I type for  a few more hours.

thank you Mr Ph. it has been recorded in my control panel, i see.
I think we muse be close to this month's block now. I'm on tickover so the sooner the better!

[philipma1957]

waiting for the


"sold out" sign on curent batches  

I want 1 more wait for me!!

i can't until mmpool hits a block.

 

I got one more with your link.  here is transaction id!

https://blockchain.info/tx/d331c82ad197ae0f3ecb0884dcaeb86233fb6e78a12752b2a7f2a1cdab45e1ce

I may buy 1 more tomorrow!


oh I am shooting 20 th at mmpool as I type for  a few more hours.

thank you Mr Ph. it has been recorded in my control panel, i see.
I think we muse be close to this month's block now. I'm on tickover so the sooner the better!

I would like to hit that block on mmpool today!

With this order I am at 3 sp20's and 9 s-3's.  2 s-3's are at a friends office.  (big power discount 2.5 cents a kwatt vs 15 cents)

 I want to pull the 2 s-3's and put in 1 of the sp20's.

If I do this that sp20 will run all of 2015  and some of 2016 at 750 watts and 1300gh.

 It will earn over power costs until diff = 500g  and I don't know if that will ever happen as the network would need to grow over 12x its current size.

It would be nice if this  office setup could do more then 800 watts but he limits me to 800-850 watts.

[edgar]

ugh. sp20 offline again!!

and now myminer.io displays sp30 & sp20 are on the same IP, when they 100% are NOT.

talk about babysitting!

[raskul]

Code:

[quote author=raskul link=topic=521520.msg9698732#msg9698732 date=1417359441]
[quote author=philipma1957 link=topic=521520.msg9698697#msg9698697 date=1417359197]
[quote author=raskul link=topic=521520.msg9698617#msg9698617 date=1417358769]
[quote author=philipma1957 link=topic=521520.msg9698610#msg9698610 date=1417358746]
[quote author=raskul link=topic=521520.msg9698523#msg9698523 date=1417358060]
waiting for the 


"sold out" sign on curent batches  :-X
[/quote] 

I want 1 more wait for me!!
[/quote]

i can't until mmpool hits a block.

 >:(
[/quote]

I got one more with your link.  here is transaction id!

https://blockchain.info/tx/d331c82ad197ae0f3ecb0884dcaeb86233fb6e78a12752b2a7f2a1cdab45e1ce

I may buy 1 more tomorrow!


oh I am shooting 20 th at mmpool as I type for  a few more hours.
[/quote]

thank you Mr Ph. it has been recorded in my control panel, i see.
I think we muse be close to this month's block now. I'm on tickover so the sooner the better!
[/quote]

I would like to hit that block on mmpool today!

With this order I am at 3 sp20's and 9 s-3's.  2 s-3's are at a friends office.  (big power discount 2.5 cents a kwatt vs 15 cents)

 I want to pull the 2 s-3's and put in 1 of the sp20's.

If I do this that sp20 will run all of 2015  and some of 2016 at 750 watts and 1300gh.

 It will earn over power costs until diff = 500g  and I don't know if that will ever happen as the network would need to grow over 12x its current size.

It would be nice if this  office setup could do more then 800 watts but he limits me to 800-850 watts.

my sp10's are in a secret location on the planet Dawson, where I get free electric. They are currently underclocked as the unit they are in is limited in power draw, but at some point over the next two weeks or so, we are getting an extra fusebox so that the miners can run on their own power phase.  I have the option of sending my s3's and the SP20 too but i like to have something at home, and as long as the SP20 is profitable vs electric costs, i'm quite happy with that.

hoping to be able to get myself one of those 5.5TH/s beasts and have that mining to the kids' wallet for the future.
currently i'm only at ~5TH/s so i doubt it'll be me that find that mmpool block. If it goes to a long round and some of the weak impatient hands drop out, i should be looking at ~2.5BTC for the round. However if you keep pushing 20TH/s rentals, i'll be lucky if I see the best part of 2BTC!

haha, all in good banter.

[Tupsu]

Please follow the following instructions in the same way you followed them last time:

1) ssh into the unit
2) echo SP2x > /model_id; echo SP20 > /model_name;
3) Do FW upgrade using Web

It worked. Now I have  2x SP20E Jackson
Thanks

[Deagle21]

waiting for the


"sold out" sign on curent batches 

Almost pulled the trigger but saw they wanted $119 for shipping.  I hit the little red x.

[raskul]

waiting for the


"sold out" sign on curent batches 

Almost pulled the trigger but saw they wanted $119 for shipping.  I hit the little red x.

that is actual cost, they don't add on any premium to the shipping costs.

[jackbox]

waiting for the


"sold out" sign on curent batches 

Almost pulled the trigger but saw they wanted $119 for shipping.  I hit the little red x.

I hear you. They want $160 for shipping to Bangkok, Thailand. That is very steep indeed.

[philipma1957]

waiting for the


"sold out" sign on curent batches 

Almost pulled the trigger but saw they wanted $119 for shipping.  I hit the little red x.

yeah it comes to 814 .    if you have a psu that will work these are pretty good

if you do not have a psu the s-4's may be a better deal for you.

an s-4 comes to 930  .

 I have a house full of s-3's and psu's.  the sp20 is a good upgrade for me.

 
my goal is sell 6 s-3's   they use 2200 watts and 2 evga's  1300 g2  to hash  2760gh


I should be able to run 3 sp20's use 2280 watts and the same 2 evga's    to hash 4000gh  



I save :
1)room
2)wires
3)power  efficiency

plus   I get 1.2th more hash

with the sale of the 6 s-3's  my cost to upgrade is okay  say 3 x sp20's  = 2500 - 1200 for the  6 s-3's =  an outlay of 1300.
If I mine the sp20's for 3 months I get back the 1300.   but i had the psu's on hand

[mdude77]

waiting for the


"sold out" sign on curent batches  

Almost pulled the trigger but saw they wanted $119 for shipping.  I hit the little red x.

yeah it comes to 814 .    if you have a psu that will work these are pretty good

if you do not have a psu the s-4's may be a better deal for you.

an s-4 comes to 930  .

An S4 comes to 930 where?  You mean if you buy a set of 16?

I'm seeing $1200 + shipping..

M

EDIT: Duh, $400 coupon.  <face palm>

[jackbox]

waiting for the


"sold out" sign on curent batches 

Almost pulled the trigger but saw they wanted $119 for shipping.  I hit the little red x.

yeah it comes to 814 .    if you have a psu that will work these are pretty good

if you do not have a psu the s-4's may be a better deal for you.

an s-4 comes to 930  .

An S4 comes to 930 where?  You mean if you buy a set of 16?

I'm seeing $1200 + shipping..

M

All current customers got $400 off S4 coupons. You want to buy one I will give you a free coupon.

[raskul]

Code:

[quote author=mdude77 link=topic=521520.msg9699404#msg9699404 date=1417364866]
[quote author=philipma1957 link=topic=521520.msg9699376#msg9699376 date=1417364640]
[quote author=Deagle21 link=topic=521520.msg9699251#msg9699251 date=1417363458]
[quote author=raskul link=topic=521520.msg9698523#msg9698523 date=1417358060]
waiting for the 


"sold out" sign on curent batches  :-X
[/quote]

Almost pulled the trigger but saw they wanted $119 for shipping.  I hit the little red x.
[/quote]

yeah it comes to 814 .    if you have a psu that will work these are pretty good

if you do not have a psu the s-4's may be a better deal for you.

an s-4 comes to 930  . 
[/quote]

An S4 comes to 930 where?  You mean if you buy a set of 16?

I'm seeing $1200 + shipping..

M
[/quote]

All current customers got $400 off S4 coupons. You want to buy one I will give you a free coupon.

i despair.

complaints about spondoolies shipping costs being $119 reverts to the fact that bitmain charge $130 shipping

and that's a better deal, how?
please keep the thread on topic.

[Biodom]

waiting for the


"sold out" sign on curent batches  

Almost pulled the trigger but saw they wanted $119 for shipping.  I hit the little red x.

yeah it comes to 814 .    if you have a psu that will work these are pretty good

if you do not have a psu the s-4's may be a better deal for you.

an s-4 comes to 930  .

 I have a house full of s-3's and psu's.  the sp20 is a good upgrade for me.

 
my goal is sell 6 s-3's   they use 2200 watts and 2 evga's  1300 g2  to hash  2760gh


I should be able to run 3 sp20's use 2280 watts and the same 2 evga's    to hash 4000gh  



I save :
1)room
2)wires
3)power  efficiency

plus   I get 1.2th more hash

with the sale of the 6 s-3's  my cost to upgrade is okay  say 3 x sp20's  = 2500 - 1200 for the  6 s-3's =  an outlay of 1300.
If I mine the sp20's for 3 months I get back the 1300.   but i had the psu's on hand

You just want to play with new tech-totally understandable.
Otherwise, what prevents you from just keeping your 6 S3-you said that they already paid for themselves and they are very-very profitable (with zero cost and 10c/kw electricity), especially considering the heat. I calculated that if you include heat savings, each S3 uses just $20-21/mo and produces ~$55-61/mo right now.

That said, I am salivating at Sp-20 deal just because I want something new, maybe will pull the trigger anyway.
I am thinking of putting Sp-20 possibly in upstairs attic that is not air conditioned.
Has anybody done this (Sp-20 at wildly fluctuating temperatures)?

[philipma1957]

waiting for the


"sold out" sign on curent batches 

Almost pulled the trigger but saw they wanted $119 for shipping.  I hit the little red x.

yeah it comes to 814 .    if you have a psu that will work these are pretty good

if you do not have a psu the s-4's may be a better deal for you.

an s-4 comes to 930  .

 I have a house full of s-3's and psu's.  the sp20 is a good upgrade for me.

 
my goal is sell 6 s-3's   they use 2200 watts and 2 evga's  1300 g2  to hash  2760gh


I should be able to run 3 sp20's use 2280 watts and the same 2 evga's    to hash 4000gh  



I save :
1)room
2)wires
3)power  efficiency

plus   I get 1.2th more hash

with the sale of the 6 s-3's  my cost to upgrade is okay  say 3 x sp20's  = 2500 - 1200 for the  6 s-3's =  an outlay of 1300.
If I mine the sp20's for 3 months I get back the 1300.   but i had the psu's on hand

You just want to play with new tech-totally understandable.
Otherwise, what prevents you from just keeping your 6 S3-you said that they already paid for themselves and they are very-very profitable (with zero cost and 10c/kw electricity), especially considering the heat. I calculated that if you include heat savings, each S3 uses just $20-21/mo and produces ~$55-61/mo right now.

That said, I am greatly salivating at Sp-20 just because I want something new, maybe will pull the trigger anyway.
I am thinking of putting Sp-20 possibly in upstairs attic that is not air conditioned.
Have anybody done this (Sp-20 at wildly fluctuating temperatures)?

well remember I had 12 s-3's moved 3 out down to 9 s-3's  moving 3 more out drops me to 6 s-3's.

and now the 3 sp20's .

     so I will have 9 pieces of gear not 12.

  my space and my power is limited.  I can  fit 12 s-3's

  Actually I can 15 s-3's in my garage and 2 in my friends office  in terms of space.

 in terms of power I can run 12 s-3's in my garage and 2  s-3's in my friends office.  this would be realistic for the winter and doable. max of 6.5th

 having 4 sp20's   and 6 s-3's  max of 8.6th   

better yet 7 sp20's no s-3's  works better. 9.1th max  .

 my issue is power cost is high in NJ :

16 cents JUNE 1 to Sept 30 
10 cents OCT 1 to May 31--------------with the bonus heat savings factored in.

I get .55-.57  watts   with the sp20 underclocked 

The s-3's go down to .74 watts   maybe .68 with the pencil mod. 

     The extra efficiency means a lot.  So for me the change over from s-3 to sp20 makes sense.  I stay in the game longer and this gives me more time for the bull runs like  March-April 2013 or Oct- Nov 2013.

Those 4 months  made more for me then the other 25 months of mining I have done.

[s1gs3gv]

I stay in the game longer and this gives me more time for the bull runs like  March-April 2013 or Oct- Nov 2013.

Those 4 months  made more for me then the other 25 months of mining I have done.

So you're expecting another bull run huh ?

~L)L~

[stan258]

I bought another. I just can't help it.