raskul
|
|
December 04, 2014, 07:07:30 PM |
|
Gutted mine didn't arrive today, DHL gave some crap on the web site: Further Detail: The shipment could not be delivered immediately Next Step: The shipment will be allocated to a courier for delivery in the following delivery cycle So rang them up and the nice lass on the phone read out that the log said that it wasn't accepted. Why don't they just tell the truth and say "couldn't be arsed" when i got similar with an SP10, i called and told them i'd be there in 30 mins to collect it, complete with a copy of the waybill/invoice. i collected it, when it would have been 3 days delay due to a bank holiday.
|
tips 1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
|
|
|
|
|
|
|
|
Transactions must be included in a block to be properly completed. When you send a transaction, it is broadcast to miners. Miners can then optionally include it in their next blocks. Miners will be more inclined to include your transaction if it has a higher transaction fee.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
wpgdeez
|
|
December 04, 2014, 07:48:00 PM |
|
Gutted mine didn't arrive today, DHL gave some crap on the web site: Further Detail: The shipment could not be delivered immediately Next Step: The shipment will be allocated to a courier for delivery in the following delivery cycle So rang them up and the nice lass on the phone read out that the log said that it wasn't accepted. Why don't they just tell the truth and say "couldn't be arsed" when i got similar with an SP10, i called and told them i'd be there in 30 mins to collect it, complete with a copy of the waybill/invoice. i collected it, when it would have been 3 days delay due to a bank holiday. I did the same and was able to hash 3 days earlier
|
|
|
|
|
raskul
|
|
December 04, 2014, 08:31:15 PM |
|
my wife would have a flappy fit.
|
tips 1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
|
|
|
Hunger
Member
Offline
Activity: 85
Merit: 10
|
|
December 04, 2014, 08:33:11 PM |
|
philipma1957: what is the temperature do you have on the sp20?
|
|
|
|
bobsmoke
|
|
December 04, 2014, 08:33:55 PM |
|
Hello - Is 2.5.12 a stable version? did you encounter any issues upgrading from 2.4.x to it on SP3x?
thx
|
|
|
|
Hunger
Member
Offline
Activity: 85
Merit: 10
|
|
December 04, 2014, 09:41:10 PM |
|
Hello - Is 2.5.12 a stable version? did you encounter any issues upgrading from 2.4.x to it on SP3x?
thx
I´m asking the same
|
|
|
|
PatMan
|
|
December 04, 2014, 09:41:39 PM |
|
Hi guys, SP20 runner here. My firmware tab has changed to: Current firmware version: 2.5.27 Latest available firmware version: 2.5.12 ? Seems my current firmware has gone from the list, is the latest firmware a downgrade or an upgrade? Peace
|
|
|
|
nexus99
Legendary
Offline
Activity: 910
Merit: 1000
|
|
December 04, 2014, 09:42:23 PM |
|
Hi guys, SP20 runner here. My firmware tab has changed to: Current firmware version: 2.5.27 Latest available firmware version: 2.5.12 ? Seems my current firmware has gone from the list, is the latest firmware a downgrade or an upgrade? Peace I never got the option for anything higher than .12 on mine.
|
|
|
|
DevonMiner
|
|
December 04, 2014, 09:49:50 PM |
|
Hi guys, SP20 runner here. My firmware tab has changed to: Current firmware version: 2.5.27 Latest available firmware version: 2.5.12 ? Seems my current firmware has gone from the list, is the latest firmware a downgrade or an upgrade? Peace Odd, I'm not near my SP20s right now, but the Sponds Technical blog says (dated 11th November, which is a good few days ago): Version 2.5.12Version 2.5.12 became the official, 2.5.6 removed and 2.5.13 is the latest experimental. 2.5.12 - different handling of BIST and Murata flow - improves stability. 2.5.13 - sets default (after factory reset) values to 1275/288 in SP3x/SP2x. Redirection bug fixed. Handling of ambient temperatures lower then 0c added. How you got to .27 I don't know
|
|
|
|
PatMan
|
|
December 04, 2014, 09:55:51 PM |
|
How you got to .27 I don't know Yeah, it's strange. I only upgraded it a few days ago too.......
|
|
|
|
ElGabo
|
|
December 04, 2014, 09:58:33 PM |
|
got my sp20E today.
dhl tried stinging me for 100usd more than the 200usd they did last time....
so far so good with the rig.
how many rigs does one need to purchase to qualify for a t-shirt
Buy another one and contact sales@ before. We'll ship a t-shirt. Guy Maaannnnn...... I just bought a half pallet and didn't got a shirt.....
|
" I'm waiting for my punishment, I know it's on my way So cut, cut, cut me up and fuck, fuck, fuck me up"
|
|
|
ElGabo
|
|
December 04, 2014, 10:02:50 PM |
|
Just a small update.
I fired up the whole lot.
Average between 1600-1710Ghs.
Running on firmware 2.5.33 test.
|
" I'm waiting for my punishment, I know it's on my way So cut, cut, cut me up and fuck, fuck, fuck me up"
|
|
|
Hunger
Member
Offline
Activity: 85
Merit: 10
|
|
December 04, 2014, 10:13:49 PM |
|
Is SP20 only capable mining bitcoin?
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4116
Merit: 7862
'The right to privacy matters'
|
|
December 04, 2014, 10:31:45 PM Last edit: December 04, 2014, 10:41:50 PM by philipma1957 |
|
philipma1957: what is the temperature do you have on the sp20?
give me a minute to do screen shots here are all 4 units. now with underclock I leave 4 x 300 = 1.2th or maybe 4 x 250 = 1th but I can manage the heat the sound and power use better. A hundred or less in parts and this can run 5 months maybe 6 months before it is too hot in the Garage.
|
|
|
|
Hunger
Member
Offline
Activity: 85
Merit: 10
|
|
December 04, 2014, 10:52:07 PM |
|
Ok i have no idea how to insert picture, but mine is
Temp: 23c / 72.66 Fan speed: 90 Start Voltage 0.69 / 0.69 / 0.69 / 0.69 Max Voltage 0.75 Max Watts 288 / 288 / 288 / 288
Mining rate atm 1598.04Ghs
i think i will need to find a good idea to cool the room more when i have my other units running.
|
|
|
|
wh00per
|
|
December 04, 2014, 11:01:24 PM |
|
Hello - Is 2.5.12 a stable version? did you encounter any issues upgrading from 2.4.x to it on SP3x?
thx
Bobsmoke, I was speaking with SPT support about one of my power supplies which failed. Michael first updated the firmware to 2.5.12 then we started to debug the issue. Since then (3 days ago) the miner is running stable (with a bad power supply) at half a hashrate .. but I could not see anything wrong with the update. 2.5.12 is as good as 2.5.6 which was the first firmware making my SP30 to run stable. Way better than those before which, in my opinion were pushing the SP30 above the stability limits. The main update in 2.5.x is CGminer .. which is upgraded to V4.7.0, being optimized for the SP3x units by ckolivas. It has a lower size on disk and eats less processor time. There is also a power supply limitation to 1250W output, but with different engine settings it gives out the same hashrate as before, when running the 1330W configuration. The unit likes to run a bit hotter, make sure you still have the fans to 80% after the update (2.5.6 had them set at 70% by default, 2.5.12 preserved the existing 80% settings). Else, I'm still waiting for an email from Barbara with respect to the PSU RMA which is not happening as quickly as one would imagine. However the unit is running decently flat .. http://powerprice.info/SPT/graphic.php with rather significant deltaT at input over the day.
|
CSA/cUL Certified Power Distribution Panels - Basic, Switched, Metered. 1-3 phases. Up to 600V. NMC:N4F9qvHz11BHcc4nh1LCJFsrZhA1EWgVwj
|
|
|
edgar
Legendary
Offline
Activity: 1848
Merit: 1001
|
|
December 04, 2014, 11:50:16 PM |
|
Hello - Is 2.5.12 a stable version? did you encounter any issues upgrading from 2.4.x to it on SP3x?
thx
I´m asking the same since upgrading from 2.3.46 to 2.5.12 my sp30 is unable to tolerate the previously acceptable ambient temps - even though its now december and considerably cooler! i repeatedly requested a FW downgrade but after days of asking i simply lowered max watts and now get 4.1 instead of 4.5-4.6 if i push any higher i get thermal instability until sunset YMMV
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4116
Merit: 7862
'The right to privacy matters'
|
|
December 04, 2014, 11:52:10 PM |
|
Ok i have no idea how to insert picture, but mine is
Temp: 23c / 72.66 Fan speed: 90 Start Voltage 0.69 / 0.69 / 0.69 / 0.69 Max Voltage 0.75 Max Watts 288 / 288 / 288 / 288
Mining rate atm 1598.04Ghs
i think i will need to find a good idea to cool the room more when i have my other units running.
drop those settings fan 90 try 0.69/ 0.69 / 0.68 / 0.68 max voltage 0.72 max watts 240/240/240/240 see what you hash with that.
|
|
|
|
Biffa
Legendary
Offline
Activity: 3220
Merit: 1220
|
|
December 05, 2014, 01:19:54 AM |
|
How you got to .27 I don't know Yeah, it's strange. I only upgraded it a few days ago too....... I've got 2.5.27 on mine
|
|
|
|
|