jtoomim
|
|
December 07, 2014, 10:57:35 PM |
|
Hey, does anybody have the same problem when sending email to sales@ ? "Delivery to the following recipient failed permanently: sales@spondoolies-tech.comTechnical details of permanent failure: Message rejected by Google Groups. Please visit http://mail.google.com/support/bin/answer.py?hl=en&answer=188131 to review our Bulk Email Senders Guidelines." Edit: cc of the same email sent to a person at spond seems to go through fine, so problem seems to be at sales@ address I've gotten this problem a lot in the past too. I think if you send the same message from different email addresses, then Google will just think you've got several email addresses that are working in collusion to send spam. Try sending an email to a specific person at Spondoolies (e.g. katyap@spondoolies-tech.com or barbara@) instead of one of their shared email addresses, as the individuals' addresses aren't mediated by Google Groups. You should also forward the error along to stas@, as AFAIK it's his job to make sure this works.
|
Hosting bitcoin miners for $65 to $80/kW/month on clean, cheap hydro power. http://Toom.im
|
|
|
philipma1957
Legendary
Offline
Activity: 4284
Merit: 8755
'The right to privacy matters'
|
|
December 08, 2014, 12:01:55 AM |
|
philipma1957: Units are running fine now thank you, around 33 degree and getting 1.28th/z mining rate, i use EVGA 1300 do you use SATA inputs on the psu or VGA? i will work on getting those units work 100% as i bought them for that reason, i like your garage! hope you have good neighbours that tolerate the noises! I am picking up a EVHC Supernova G2 1300 for my SP20. I'll send in my results when Amazon drops off the PSU next week! Thanks! I use the pcie or as you say vga. here are my 4 running as I type
|
|
|
|
Biffa
Legendary
Offline
Activity: 3234
Merit: 1220
|
|
December 08, 2014, 12:13:30 AM |
|
I understand the limits etc but why is one PSU going to 1360 and the other stuck at 1250?
Without voltages on the two power supplies no one can say for sure. if one power supply has 217V and the other 218V they can behave like that. An 1-2V between power supplies can happen due to bad contacts (i.e. higher resistance), loose plug etc. What voltages are on your dashboard? 209/210
|
|
|
|
miner454
Newbie
Offline
Activity: 50
Merit: 0
|
|
December 08, 2014, 01:48:46 AM |
|
Hey, does anybody have the same problem when sending email to sales@ ? "Delivery to the following recipient failed permanently: sales@spondoolies-tech.comTechnical details of permanent failure: Message rejected by Google Groups. Please visit http://mail.google.com/support/bin/answer.py?hl=en&answer=188131 to review our Bulk Email Senders Guidelines." Edit: cc of the same email sent to a person at spond seems to go through fine, so problem seems to be at sales@ address I've gotten this problem a lot in the past too. I think if you send the same message from different email addresses, then Google will just think you've got several email addresses that are working in collusion to send spam. Try sending an email to a specific person at Spondoolies (e.g. katyap@spondoolies-tech.com or barbara@) instead of one of their shared email addresses, as the individuals' addresses aren't mediated by Google Groups. You should also forward the error along to stas@, as AFAIK it's his job to make sure this works. I got this to work by clearing out the included message history. Start with a blank slate and include just the last two message history.
|
|
|
|
Biodom
Legendary
Offline
Activity: 3920
Merit: 4434
|
|
December 08, 2014, 05:07:29 AM Last edit: December 08, 2014, 06:37:27 AM by Biodom |
|
Hey, does anybody have the same problem when sending email to sales@ ? "Delivery to the following recipient failed permanently: sales@spondoolies-tech.comTechnical details of permanent failure: Message rejected by Google Groups. Please visit http://mail.google.com/support/bin/answer.py?hl=en&answer=188131 to review our Bulk Email Senders Guidelines." Edit: cc of the same email sent to a person at spond seems to go through fine, so problem seems to be at sales@ address I've gotten this problem a lot in the past too. I think if you send the same message from different email addresses, then Google will just think you've got several email addresses that are working in collusion to send spam. Try sending an email to a specific person at Spondoolies (e.g. katyap@spondoolies-tech.com or barbara@) instead of one of their shared email addresses, as the individuals' addresses aren't mediated by Google Groups. You should also forward the error along to stas@, as AFAIK it's his job to make sure this works. I got this to work by clearing out the included message history. Start with a blank slate and include just the last two message history. I included only one prior message. It must be something in the header that gets messed up. The header that came with an error was super complicated. Ahem, if I was spond's staff member responsible for this, I would worry about messages to sales NOT going through, but...
|
|
|
|
mdude77
Legendary
Offline
Activity: 1540
Merit: 1001
|
|
December 08, 2014, 12:19:53 PM |
|
FYI, I have basic monitoring capabilities added to my miner monitoring app for SP20s with more feature functionality coming. It'd be great if folks with other SP models can give it a whirl as well and let me know how it works. This is a Windows .net app. See: https://bitcointalk.org/index.php?topic=596178.msg9772660#msg9772660Thank you. M
|
I mine at Kano's Pool because it pays the best and is completely transparent! Come join me!
|
|
|
raskul
|
|
December 08, 2014, 12:23:21 PM |
|
great work as ever mdude77, i'll install it on my win machine now and let you know EDIT. doh. scrap that. miners are not on the same network.
|
tips 1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
|
|
|
lemonte
|
|
December 08, 2014, 12:25:27 PM |
|
Amazing service from Spondoolies!
Ordered Thursday and the SP31 showed up in the UK on Friday. If it hadn't been for DHL needing to wait 24 hours after paying the customs fee I'd have been hashing within 24 hours, that must be a record!
|
|
|
|
raskul
|
|
December 08, 2014, 12:30:28 PM |
|
Amazing service from Spondoolies!
Ordered Thursday and the SP31 showed up in the UK on Friday. If it hadn't been for DHL needing to wait 24 hours after paying the customs fee I'd have been hashing within 24 hours, that must be a record!
i had similar last SP20 i received. And you can pick up the shipment from the DHL depot prior to 24hrs clearance (if it gets to depot in that time).
|
tips 1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
|
|
|
mdude77
Legendary
Offline
Activity: 1540
Merit: 1001
|
|
December 08, 2014, 12:47:34 PM |
|
great work as ever mdude77, i'll install it on my win machine now and let you know EDIT. doh. scrap that. miners are not on the same network. If you can reach it through your browser it should be reachable via my app. M
|
I mine at Kano's Pool because it pays the best and is completely transparent! Come join me!
|
|
|
Hunger
Member
Offline
Activity: 85
Merit: 10
|
|
December 08, 2014, 12:47:47 PM |
|
philipma1957: ok then i´m doing it correctly, i´m doing a expirement now and getting good results Mining Rate: 1728.32Ghs Temp Front / Back T,B 11 °C / 65,59 °C Fan Speed 40 Start Voltage 0.69 / 0.69 / 0.69 / 0.69 Max Voltage 0.75 Max Watts 288 / 288 / 288 / 288 This has been running stable for 2 hours, as you can see the fan is 40, love that "silent"
|
|
|
|
Biffa
Legendary
Offline
Activity: 3234
Merit: 1220
|
|
December 08, 2014, 01:23:09 PM |
|
great work as ever mdude77, i'll install it on my win machine now and let you know EDIT. doh. scrap that. miners are not on the same network. If you can reach it through your browser it should be reachable via my app. M Trying SP20 via API on my LAN, set the allowed IP address in cgminer but not seeing anything on the app. Tried via HTTP as well, nothing showing, however it did reboot my miner via ssh!
|
|
|
|
Hunger
Member
Offline
Activity: 85
Merit: 10
|
|
December 08, 2014, 01:26:19 PM |
|
great work as ever mdude77, i'll install it on my win machine now and let you know EDIT. doh. scrap that. miners are not on the same network. If you can reach it through your browser it should be reachable via my app. M Trying SP20 via API on my LAN, set the allowed IP address in cgminer but not seeing anything on the app. Tried via HTTP as well, nothing showing, however it did reboot my miner via ssh! I´m wondering if anyone has been able to put up Wifi with dongle?
|
|
|
|
Biffa
Legendary
Offline
Activity: 3234
Merit: 1220
|
|
December 08, 2014, 01:29:04 PM |
|
great work as ever mdude77, i'll install it on my win machine now and let you know EDIT. doh. scrap that. miners are not on the same network. If you can reach it through your browser it should be reachable via my app. M Trying SP20 via API on my LAN, set the allowed IP address in cgminer but not seeing anything on the app. Tried via HTTP as well, nothing showing, however it did reboot my miner via ssh! I´m wondering if anyone has been able to put up Wifi with dongle? The OS is very stripped back, they remove everything not needed, I would think that you are better using a lan to wifi adapter. http://www.amazon.com/NETGEAR-Universal-Ethernet-Adapter-WNCE2001/dp/B003KPBRRW
|
|
|
|
raskul
|
|
December 08, 2014, 01:40:34 PM |
|
great work as ever mdude77, i'll install it on my win machine now and let you know EDIT. doh. scrap that. miners are not on the same network. If you can reach it through your browser it should be reachable via my app. M i use teamviewer to log into them at remote locations. 3 rigs are in a secure unit and i don't have admin rights to install software and the others are in my mums garage up the road; where they use macs
|
tips 1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
|
|
|
mdude77
Legendary
Offline
Activity: 1540
Merit: 1001
|
|
December 08, 2014, 02:18:54 PM |
|
great work as ever mdude77, i'll install it on my win machine now and let you know EDIT. doh. scrap that. miners are not on the same network. If you can reach it through your browser it should be reachable via my app. M Trying SP20 via API on my LAN, set the allowed IP address in cgminer but not seeing anything on the app. Tried via HTTP as well, nothing showing, however it did reboot my miner via ssh! Did you restart cgminer from the web console for the SP20? Otherwise the allowed IP won't take effect. As for the reboot.. by the way you said that, I guess you didn't request it? I don't have any sorts of alerts or auto reboots on the SPs yet. The log should indicate why it was rebooted as well. M
|
I mine at Kano's Pool because it pays the best and is completely transparent! Come join me!
|
|
|
Guy Corem (OP)
Donator
Legendary
Offline
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
|
|
December 08, 2014, 02:26:36 PM |
|
great work as ever mdude77, i'll install it on my win machine now and let you know EDIT. doh. scrap that. miners are not on the same network. If you can reach it through your browser it should be reachable via my app. M Trying SP20 via API on my LAN, set the allowed IP address in cgminer but not seeing anything on the app. Tried via HTTP as well, nothing showing, however it did reboot my miner via ssh! I´m wondering if anyone has been able to put up Wifi with dongle? The support is experimental: http://www.spondoolies-tech.com/blogs/technical-blog/14142985-development-version-1-3-18-with-experimental-wifi-support
|
|
|
|
Biffa
Legendary
Offline
Activity: 3234
Merit: 1220
|
|
December 08, 2014, 02:38:12 PM |
|
Trying SP20 via API on my LAN, set the allowed IP address in cgminer but not seeing anything on the app. Tried via HTTP as well, nothing showing, however it did reboot my miner via ssh! Did you restart cgminer from the web console for the SP20? Otherwise the allowed IP won't take effect. As for the reboot.. by the way you said that, I guess you didn't request it? I don't have any sorts of alerts or auto reboots on the SPs yet. The log should indicate why it was rebooted as well. M Yes restarted from the web console. Not sure why it rebooted via SSH but the log did mention that it had rebooted via SSH which is how I knew. Unfortunately I closed it and it doesn't seem to keep any archive of log files, otherwise I'd be more help, sorry. Either way it should have picked up the allowed IP after it rebooted, and I tried for a while to get it to connect after.
|
|
|
|
Hunger
Member
Offline
Activity: 85
Merit: 10
|
|
December 08, 2014, 02:43:21 PM |
|
Temp Front / Back T,B 13 °C / 69,67 °C Fan Speed 40 Start Voltage 0.69 / 0.69 / 0.69 / 0.69 Max Voltage 0.75 Max Watts 288 / 288 / 288 / 288
This must be a good number right? am i in a position to overclock?
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4284
Merit: 8755
'The right to privacy matters'
|
|
December 08, 2014, 03:20:48 PM |
|
Temp Front / Back T,B 13 °C / 69,67 °C Fan Speed 40 Start Voltage 0.69 / 0.69 / 0.69 / 0.69 Max Voltage 0.75 Max Watts 288 / 288 / 288 / 288
This must be a good number right? am i in a position to overclock?
no no no fan is too low set fan to 80 set watts to 240
|
|
|
|
|