[XMR] Monero - A secure, private, untraceable cryptocurrency

[anubizz]

You said that the „—prune blockchain“ option needs to be includet every time the daemon is started, right!?
My problem:
To be safe i deleted the old blockchain database and started a fully new sync. The daemon was running till 66% and then he stoped and shut down. I don‘t know why..
When i start monerod  again with „--prune blockchain“ i get the error „could not start sync- to many dirty blocks“. When i do the same with „-db salve“ instead of „-prune blockchain“ it starts to sync again but also shuts down some hours later.

The last version of the daemon was slower but worked constant. What could be the problem?

[1714005823]

1714005823

[1714005823]

1714005823

[1714005823]

1714005823

[dEBRUYNE]

You said that the „—prune blockchain“ option needs to be includet every time the daemon is started, right!?
My problem:
To be safe i deleted the old blockchain database and started a fully new sync. The daemon was running till 66% and then he stoped and shut down. I don‘t know why..
When i start monerod  again with „--prune blockchain“ i get the error „could not start sync- to many dirty blocks“. When i do the same with „-db salve“ instead of „-prune blockchain“ it starts to sync again but also shuts down some hours later.

The last version of the daemon was slower but worked constant. What could be the problem?

You may have accidentally corrupted the blockchain. There's also a bug in v0.14.1.0 due to which pruning on a sync from scratch does not function properly. I'd suggest to perform a normal resync from scratch and thereafter utilize the pruning tool.

[bitcoin_age]

Monero market cap with new updates gonna make it sky rocketing perhaps leading to new ath as supply gets short the demand for it keep increasing i think by 2020 we will see some great upgrades and nice adoption 

[Grandmaster Nitemare]

Monero is now @ -12% from the swing high! Are there any bad news or is this a normal correction? Because this would be a good price to start accumulate now!

[joll_88]

Haven't heard anything. Must be people selling XMR and moving into ETH and BTC while the run is on.

[Grandmaster Nitemare]

Haven't heard anything. Must be people selling XMR and moving into ETH and BTC while the run is on.

Yes, I think so too!
BTC is up like crazy and the Altcoins are flat. Only a few exceptions like NEO, QTUM, Omise ...
Have bought some Monero. Good time now I think.

[Swordsoffreedom]

Haven't heard anything. Must be people selling XMR and moving into ETH and BTC while the run is on.

Yes, I think so too!
BTC is up like crazy and the Altcoins are flat. Only a few exceptions like NEO, QTUM, Omise ...
Have bought some Monero. Good time now I think.

I didn't want to miss that chance too. And I really am a fan of Bitcoin. But at 0.0083 I think Monero is undervalued.
I couldn't find any bad news and there was big Monero conference few days ago which shows the community is active so my decision was easy. I will sell half at 0.011 and half at 0.015.

[Globb0]

Hmm might send my bit of BTC to an exchange, opportunities.

I like the RSI we are at a bottom btc is at a top.

Flip Flip?

[tranthidung]

Hmm might send my bit of BTC to an exchange, opportunities.

I like the RSI we are at a bottom btc is at a top.

Flip Flip?

It is true that altcoins hit their bottoms with support from bitcoin rises. Monero, surely, hit its bottom, and within next 4 or 8 hours, or later in coming days, the coin will rally considerably. IMO. Buy at the dips, and wait for recoveries.

[gembitz]

Hmm might send my bit of BTC to an exchange, opportunities.

I like the RSI we are at a bottom btc is at a top.

Flip Flip?

It is true that altcoins hit their bottoms with support from bitcoin rises. Monero, surely, hit its bottom, and within next 4 or 8 hours, or later in coming days, the coin will rally considerably. IMO. Buy at the dips, and wait for recoveries.

bottom is like 1 satoshi no one wants botnets running around in drones lmfaoooo    lel

[mindrust]

Deleting soon.

[Globb0]

Manipulated as ever

Ouch though (still top volume coin there)

[Mek]

Hi,
I upgraded my wallet from v12 to v14. But I am having an issue: monero-wallet-gui.exe does not work. It only appears in Task Manager for a second, and then immediately exits. No log file is created so I am at a loss what happens. Previous version worked OK.
I downloaded the archive from official website (not the installer) and replaced all files in my Monero folder as usual. Since then, monero-wallet-gui.exe did not work.
I then ran monerod.exe, which worked OK. At first it upgraded blockchain database from version 1 to version 2, then 3, then 4 (if I remember correctly). It is synchronizing blocks as I write this post. So my blockchain db is not corrupt. I tried running the GUI wallet while monerod.exe is running, same result. And turned off Avast antivirus temporarily, same result.
Can anyone advise what to do, please?

[Swordsoffreedom]

This looks very painful to watch. It is very clear where this is heading for.

How is pre-2017 time relevant? If you look at the chart since 2017 it doesn't look so pessimistic. I don't think 2015 and 2016 are relevant - at that time, the only users of Monero were dark web users and some small scale home miners.

By this logic ETH is going towards 0.005 as well ($60). Not a chance!

I might be trying to contort myself because I didn't catch a falling knife. But even looking from a distance I can't imagine XMR below 0.005 BTC.
You think it's realistically possible?

[Andretti83]

We still have Monero Speculation topic for price discussions.

https://bitcointalk.org/index.php?topic=753252.new#new

[mindrust]

We still have Monero Speculation topic for price discussions.

https://bitcointalk.org/index.php?topic=753252.new#new

Sorry about that moving my bullshit there now. 

[dEBRUYNE]

Hi,
I upgraded my wallet from v12 to v14. But I am having an issue: monero-wallet-gui.exe does not work. It only appears in Task Manager for a second, and then immediately exits. No log file is created so I am at a loss what happens. Previous version worked OK.
I downloaded the archive from official website (not the installer) and replaced all files in my Monero folder as usual. Since then, monero-wallet-gui.exe did not work.
I then ran monerod.exe, which worked OK. At first it upgraded blockchain database from version 1 to version 2, then 3, then 4 (if I remember correctly). It is synchronizing blocks as I write this post. So my blockchain db is not corrupt. I tried running the GUI wallet while monerod.exe is running, same result. And turned off Avast antivirus temporarily, same result.
Can anyone advise what to do, please?

Do you have active AV (AntiVirus) software on that system?

[anubizz]

You said that the „—prune blockchain“ option needs to be includet every time the daemon is started, right!?
My problem:
To be safe i deleted the old blockchain database and started a fully new sync. The daemon was running till 66% and then he stoped and shut down. I don‘t know why..
When i start monerod  again with „--prune blockchain“ i get the error „could not start sync- to many dirty blocks“. When i do the same with „-db salve“ instead of „-prune blockchain“ it starts to sync again but also shuts down some hours later.

The last version of the daemon was slower but worked constant. What could be the problem?

You may have accidentally corrupted the blockchain. There's also a bug in v0.14.1.0 due to which pruning on a sync from scratch does not function properly. I'd suggest to perform a normal resync from scratch and thereafter utilize the pruning tool.

A very interresting update on my situation:
I deleted the whole .bitmonero folder, cleaned up and started from scratch without the prune-tool-> same issue! At 66% the sync stops for reasons i can not find.

So just to have all tried, i created a completely new node on a different device (bananapi pro) and started sync from beginning. As i checked the logs some minutes ago i see the same problem at 66% as on the other device:
"

2019-06-27 03:24:22.495   [P2P9]   INFO   global   src/cryptonote_protocol/cryptonote_protocol_handler.inl:1390   Synced 1237971/1865802 (66%, 627831 left)
2019-06-27 15:49:30.527           b6f14210   INFO   logging   contrib/epee/src/mlog.cpp:273   New log categories: *:WARNING,net:FATAL,net.http:FATAL,net.ssl:FATAL,net.p2p:FATAL,net.cn:FATAL,global:INFO,verify:FATAL,serialization:FATAL,stacktrace:INFO,logging:INFO,msgwriter:INFO
2019-06-27 15:49:30.529           b6f14210   INFO   global   src/daemon/main.cpp:281   Monero 'Boron Butterfly' (v0.14.1.0-release)
2019-06-27 15:49:30.532           b6f14210   INFO   global   contrib/epee/src/net_ssl.cpp:124   Generating SSL certificate
2019-06-27 15:49:46.772           b6f14210   ERROR   msgwriter   src/common/scoped_message_writer.h:102   Error: Couldn't connect to daemon: 192.168.0.171:18088

"
 Whats the problem

------
Edit:

I started the sync again and watched it . After about 100 blocks it stopped with comment Segmentation fault

[dEBRUYNE]

You said that the „—prune blockchain“ option needs to be includet every time the daemon is started, right!?
My problem:
To be safe i deleted the old blockchain database and started a fully new sync. The daemon was running till 66% and then he stoped and shut down. I don‘t know why..
When i start monerod  again with „--prune blockchain“ i get the error „could not start sync- to many dirty blocks“. When i do the same with „-db salve“ instead of „-prune blockchain“ it starts to sync again but also shuts down some hours later.

The last version of the daemon was slower but worked constant. What could be the problem?

You may have accidentally corrupted the blockchain. There's also a bug in v0.14.1.0 due to which pruning on a sync from scratch does not function properly. I'd suggest to perform a normal resync from scratch and thereafter utilize the pruning tool.

A very interresting update on my situation:
I deleted the whole .bitmonero folder, cleaned up and started from scratch without the prune-tool-> same issue! At 66% the sync stops for reasons i can not find.

So just to have all tried, i created a completely new node on a different device (bananapi pro) and started sync from beginning. As i checked the logs some minutes ago i see the same problem at 66% as on the other device:
"

2019-06-27 03:24:22.495   [P2P9]   INFO   global   src/cryptonote_protocol/cryptonote_protocol_handler.inl:1390   Synced 1237971/1865802 (66%, 627831 left)
2019-06-27 15:49:30.527           b6f14210   INFO   logging   contrib/epee/src/mlog.cpp:273   New log categories: *:WARNING,net:FATAL,net.http:FATAL,net.ssl:FATAL,net.p2p:FATAL,net.cn:FATAL,global:INFO,verify:FATAL,serialization:FATAL,stacktrace:INFO,logging:INFO,msgwriter:INFO
2019-06-27 15:49:30.529           b6f14210   INFO   global   src/daemon/main.cpp:281   Monero 'Boron Butterfly' (v0.14.1.0-release)
2019-06-27 15:49:30.532           b6f14210   INFO   global   contrib/epee/src/net_ssl.cpp:124   Generating SSL certificate
2019-06-27 15:49:46.772           b6f14210   ERROR   msgwriter   src/common/scoped_message_writer.h:102   Error: Couldn't connect to daemon: 192.168.0.171:18088

"
 Whats the problem

------
Edit:

I started the sync again and watched it . After about 100 blocks it stopped with comment Segmentation fault

Do you have sufficient free disk space on both systems? Also, why are you using a non default port?

[Mek]

Hi,
I upgraded my wallet from v12 to v14. But I am having an issue: monero-wallet-gui.exe does not work. It only appears in Task Manager for a second, and then immediately exits. No log file is created so I am at a loss what happens. Previous version worked OK.
I downloaded the archive from official website (not the installer) and replaced all files in my Monero folder as usual. Since then, monero-wallet-gui.exe did not work.
I then ran monerod.exe, which worked OK. At first it upgraded blockchain database from version 1 to version 2, then 3, then 4 (if I remember correctly). It is synchronizing blocks as I write this post. So my blockchain db is not corrupt. I tried running the GUI wallet while monerod.exe is running, same result. And turned off Avast antivirus temporarily, same result.
Can anyone advise what to do, please?

Do you have active AV (AntiVirus) software on that system?

Yes and Monero folder is under exclusions. And disabling AV makes no difference. Previous version (v12) worked without problems.