michelem (OP)
Legendary
Offline
Activity: 1015
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 22, 2014, 10:19:03 AM |
|
I have one gridseed 5 chip miner and one gridseed g-blade. Can I run both of these miners off the same raspberry pi running minera?
yes you can Do I need to use a powered usb hub? I tried a non powered hub and I got some wonky hashrates. Is that the cause? Yes you need a good powered hub, I mean neither the cheap one want work. This is very good if you don't need lot of ports: http://www.amazon.com/D-Link-Hi-Speed-7-Port-Powered-DUB-H7/dp/B00008VFAF
|
|
|
|
n00bminer
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 104
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 22, 2014, 11:25:39 AM Last edit: May 22, 2014, 11:51:41 AM by n00bminer |
|
Does anyone's screen -ls, or screen -r work with minera? If I launch the code: /usr/bin/screen -dmS cpuminer /var/www/minera/minera-bin/minerd --gc3355=/dev/ttyACM0,/dev/ttyACM1,/dev/ttyACM2,/dev/ttyACM3 -c /var/www/minera/conf/miner_conf.json from command line, it works. However, the default launching from /etc/rc.local version with miner -c "<command from above>" does not su - minera -c "/usr/bin/screen -dmS cpuminer /var/www/minera/minera-bin/minerd --gc3355=/dev/ttyACM0,/dev/ttyACM1,/dev/ttyACM2,/dev/ttyACM3 -c /var/www/minera/conf/miner_conf.json" No Sockets found
|
|
|
|
Ajeto
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 97
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 22, 2014, 11:52:02 AM |
|
my issue now can't fix. " I can't get the stats from your minerd. Please try to refresh the page or check your settings (minerd API must listen on 127.0.0.1:4028). "
use code :http://<ip>/minera/index.php/app/stats
webbrowes shows {"error":true}
How many G-Blades have you connected? I have the same problem. I have 5 blades on 1 RPi. Problem is only on this RPi, which has the latest Minera version. Other RPis with 0.1.8b work fine. You could try this on one with latest Minera version: Look at this file /var/www/minera/application/models/cpuminer_model.php Look at line 36: $out = stream_get_contents($fp); Comment out that line and replace it with this: while(!feof($fp)) { if(!($str = fread($fp, 8192))) break; $out .= $str; } Save and look at the dashboard/stats Unfortunately this did not work I did the upgrade on Rasp1 and Rasp2 (let's call them that way). Neither is showing stats. Rasp1 started to show stats for a while after i updated Linux on Raspberry too, but not anymore after i restarted the miners. Both Rasps are mining, but showing I can't get the stats from your minerd. Please try to refresh the page or check your settings (minerd API must listen on 127.0.0.1:4028.I can't upgrade the rest of the Rasps until I find a solution to this, because it's quite hard to supervise individual blades ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Do i need to use less than 5 blades per Rasp?
|
|
|
|
Ajeto
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 97
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 22, 2014, 11:55:58 AM |
|
Is it normal to get so many HW even at 838MHz? ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2F6YwiXa9.jpg&t=665&c=A9lvVF7LrgF4eQ)
|
|
|
|
n00bminer
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 104
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 22, 2014, 12:39:58 PM |
|
might be power supply issue?
I would run at 800 and see if you get HW errors like that. With cpuminer, I have less HW errors on the blades than cgminer/bfgminer at any freq.
|
|
|
|
FullBoat
Newbie
Offline
Activity: 15
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 22, 2014, 12:47:05 PM |
|
I'm running into an issue. I've upgraded to the latest version, and I don't see the save freq button anymore. Or have you changed it so it only shows after it's done autotuning?
|
|
|
|
michelem (OP)
Legendary
Offline
Activity: 1015
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 22, 2014, 12:48:27 PM |
|
Does anyone's screen -ls, or screen -r work with minera? If I launch the code: /usr/bin/screen -dmS cpuminer /var/www/minera/minera-bin/minerd --gc3355=/dev/ttyACM0,/dev/ttyACM1,/dev/ttyACM2,/dev/ttyACM3 -c /var/www/minera/conf/miner_conf.json from command line, it works. However, the default launching from /etc/rc.local version with miner -c "<command from above>" does not su - minera -c "/usr/bin/screen -dmS cpuminer /var/www/minera/minera-bin/minerd --gc3355=/dev/ttyACM0,/dev/ttyACM1,/dev/ttyACM2,/dev/ttyACM3 -c /var/www/minera/conf/miner_conf.json" No Sockets found Are you minera user when you try to attach the screen session with "screen -r"? Try:
|
|
|
|
n00bminer
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 104
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 22, 2014, 12:53:43 PM |
|
Does anyone's screen -ls, or screen -r work with minera? If I launch the code: /usr/bin/screen -dmS cpuminer /var/www/minera/minera-bin/minerd --gc3355=/dev/ttyACM0,/dev/ttyACM1,/dev/ttyACM2,/dev/ttyACM3 -c /var/www/minera/conf/miner_conf.json from command line, it works. However, the default launching from /etc/rc.local version with miner -c "<command from above>" does not su - minera -c "/usr/bin/screen -dmS cpuminer /var/www/minera/minera-bin/minerd --gc3355=/dev/ttyACM0,/dev/ttyACM1,/dev/ttyACM2,/dev/ttyACM3 -c /var/www/minera/conf/miner_conf.json" No Sockets found Are you minera user when you try to attach the screen session with "screen -r"? Try: That was it. I usually login to my raspberries as root or pi (they are not exposed). Thanks!!
|
|
|
|
SilentH
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 65
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 22, 2014, 02:00:41 PM |
|
I have one gridseed 5 chip miner and one gridseed g-blade. Can I run both of these miners off the same raspberry pi running minera?
Yes you can but keep in mind that auto freq does not work for the blades so you'll have to skip that option.
|
|
|
|
LexMine
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 84
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 22, 2014, 02:12:52 PM |
|
I'm running into an issue. I've upgraded to the latest version, and I don't see the save freq button anymore. Or have you changed it so it only shows after it's done autotuning?
It´s on the right side above the list of devices and looks like a pencil
|
|
|
|
FullBoat
Newbie
Offline
Activity: 15
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 22, 2014, 02:32:02 PM |
|
It´s on the right side above the list of devices and looks like a pencil
Doh, ok, face palm time. Now that you said that I remember.
|
|
|
|
Ajeto
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 97
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 22, 2014, 02:42:59 PM |
|
Are there really only 2 or 3 guys who have Dashboard problem after upgrading to latest version of Minera?
I'm talking about this message: I can't get the stats from your minerd. Please try to refresh the page or check your settings (minerd API must listen on 127.0.0.1:4028).
|
|
|
|
SilentH
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 65
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 22, 2014, 02:49:27 PM |
|
3 separate Pi's all working great on the latest version
|
|
|
|
LexMine
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 84
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 22, 2014, 02:57:20 PM |
|
3 separate Pi's all working great on the latest version
mine too, perfect
|
|
|
|
gbyg
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 71
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 22, 2014, 02:57:52 PM |
|
Are there really only 2 or 3 guys who have Dashboard problem after upgrading to latest version of Minera?
I'm talking about this message: I can't get the stats from your minerd. Please try to refresh the page or check your settings (minerd API must listen on 127.0.0.1:4028).
I m having same problem. RPI with latest commit
|
|
|
|
Ajeto
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 97
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 22, 2014, 02:59:00 PM |
|
Are there really only 2 or 3 guys who have Dashboard problem after upgrading to latest version of Minera?
I'm talking about this message: I can't get the stats from your minerd. Please try to refresh the page or check your settings (minerd API must listen on 127.0.0.1:4028).
I m having same problem. RPI with latest commit Is it possible to roll-back to previous version?
|
|
|
|
Ajeto
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 97
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 22, 2014, 03:06:14 PM |
|
might be power supply issue?
I would run at 800 and see if you get HW errors like that. With cpuminer, I have less HW errors on the blades than cgminer/bfgminer at any freq.
Looks like you are right. I'm using GS original industrial PSU. 1 PSU for 2 blades. With 800Mhz no HW. So i gurss i need more PSUs for higher fq.
|
|
|
|
chinatom
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 71
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 22, 2014, 03:16:03 PM |
|
|
|
|
|
chinatom
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 71
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 22, 2014, 03:17:29 PM |
|
might be power supply issue?
I would run at 800 and see if you get HW errors like that. With cpuminer, I have less HW errors on the blades than cgminer/bfgminer at any freq.
Looks like you are right. I'm using GS original industrial PSU. 1 PSU for 2 blades. With 800Mhz no HW. So i gurss i need more PSUs for higher fq. YES 800 is hw less.
|
|
|
|
LexMine
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 84
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 22, 2014, 03:48:38 PM |
|
@michelem ... by the way. you should add a few more seconds for the reboot countdown. it always ends up, that minera couldn´t be found. My Pi need two seconds more for booting.
|
|
|
|
|