Pictures of your mining rigs!

[EpicBacon]

wtf man? is this tape, to fix the fan?  

I use masking tape all day every day. (It's holding the fan in place above the cards that are close together to keep them cool)

this is cheaper and will run 4 with the right extenders/adapters
http://www.newegg.com/Product/Product.aspx?Item=N82E16813138318

That is the exact mobo I am using in my caseless rig I posted above with 4 5830's.

I have to ask, Bacon. What do you use the hammer for, to turn it on/off? ;-)

That was to nail the mobo down...duh.

I actually use the screwdriver right beside the hammer to turn it on (no joke). I was using the reverse side of the hammer to open delicious cans of sprite while working on my rigs. (I fail at opening them with my fingers)

Obviously Bacon is not worrying about short circuits ...

What's a short circuit?

This is one of my rather boring caseless rigs.

[1714209114]

1714209114

[1714209114]

1714209114

[1714209114]

1714209114

[Nilarium]

[Detritus]

IM IN UR RIG, MININ UR BTC!

[Yannick]

IM IN UR RIG, MININ UR BTC!

LOL

[CYPER]

[Sideways]

http://s50.radikal.ru/i130/1107/24/305e149051c7.jpg

Do you get better temps with the plastic off the Gfx card? I've been wondering if that will help, or hinder since I would think the designers meant for it to channel the ait thu the heatsinks..

[Nilarium]

Do you get better temps with the plastic off the Gfx card? I've been wondering if that will help, or hinder since I would think the designers meant for it to channel the ait thu the heatsinks..

no i didnt
temp on memory higher
on gpu same temp
temp on VRM i think increased also
so i didnt get better temps

[Crazy rider89]

Do you get better temps with the plastic off the Gfx card? I've been wondering if that will help, or hinder since I would think the designers meant for it to channel the ait thu the heatsinks..

no i didnt
temp on memory higher
on gpu same temp
temp on vddc i think increased also
so i didnt get better temps

remove a bit of dust! 

[onis_uk]

2x HD6950 760 Mhash/s...

[stellan0r]

2x HD6950 760 Mhash/s...

nice cooler! how well does it work?

[onis_uk]

2x HD6950 760 Mhash/s...

nice cooler! how well does it work?

very well ! i7 @ 3.8ghz 100% cpu= about 70c 

[karbonxx]

http://img840.imageshack.us/img840/3094/img0511d.jpg

http://img198.imageshack.us/img198/2425/img0512aq.jpg

My octopus A/C provides cool air directly to the Graphic Cards. I have 6 rigs currently.

[MaGNeT]

this is cheaper and will run 4 with the right extenders/adapters
http://www.newegg.com/Product/Product.aspx?Item=N82E16813138318

Some ferret is sucking your nipple; how can I take you seriously?

My girlfriends ferret is sleeping on my lap now... I love this clown...

[Detritus]

[shotgun]

It's not a pic of tits, but it's almost as nice. Here's the current state of my rack. Monitor on left. Boxes listed top to bottom.



Ultra40 #1 (2x 6870 (MSI and ASUS))
Ultra40 #2 (2x 6870 (MSI and ASUS))
Quad0 box (Currently 2x6950 MSI, room for two more 5770 single slot versions). Running a Sapphire Pure-Black MB with 4xPCIe slots.
Sun X4600-M2 not running
Sun X2100 #1 not running but maybe it will provide H/A for the next box...
Sun X2100 #2 running BTC-Mining-Proxy, apache/mysql, monitoring apps
Tres0 (2x 6870 MSI Hawk, 1x XFX 5770) room for one more single slot 5770. Running a Sapphire Pure-Black MB with 4xPCIe slots.
Tres1 (2x 6870 MSI Hawk, 1x XFX 5770) room for one more single slot 5770. Running a Sapphire Pure-Black MB with 4xPCIe slots.
APC-SmartUPS-1500VA

 I'm planning on removing the ultra40 boxes and replacing them with duplicates of the custom builds (the tres0 and tres1 boxes). And of course I'll be removing the X4600M2 box since it's taking up space and I'm not utilizing it... so that and the rest of the empty space will be filled with more boxes like the tres0.

I have more delta fans coming this week that will push 240cfm each (120mm) and those are going into quad0, tres0, and tres1.

You like? 

[Detritus]

It's not a pic of tits, but it's almost as nice. Here's the current state of my rack. Monitor on left. Boxes listed top to bottom.
.
.
.
You like? 

Now that's a clean build!

I am so jelly of the SUN rack.

[stella]

http://www.flickr.com/photos/65443894@N04/5956994245/

Above is the link to my rig with 3 x 5850s @ 1000 MH/s

Below is for my gaming rig turned mining rig with 2 x 6870 @ 600 MH/s

http://www.flickr.com/photos/65443894@N04/5956992731/in/photostream/


The 5850s need some additional fans to cool them down. One of them running above 90'C which is a bit worrying. 

[mikeo]

http://www.flickr.com/photos/65443894@N04/5956994245/

Above is the link to my rig with 3 x 5850s @ 1000 MH/s

Below is for my gaming rig turned mining rig with 2 x 6870 @ 600 MH/s

http://www.flickr.com/photos/65443894@N04/5956992731/in/photostream/


The 5850s need some additional fans to cool them down. One of them running above 90'C which is a bit worrying. 

Let me guess... it's the top 5850 that's running hot. Get them out of the case for a cooler existence.

[airdata]

Here's my latest addition : GD70,Sempron140,2GB,1000w Cougar psu,150gb raptor x , 4x5830






The raptor was the only spare drive I had at home.

[CanaryInTheMine]

It's not a pic of tits, but it's almost as nice. Here's the current state of my rack. Monitor on left. Boxes listed top to bottom.



Ultra40 #1 (2x 6870 (MSI and ASUS))
Ultra40 #2 (2x 6870 (MSI and ASUS))
Quad0 box (Currently 2x6950 MSI, room for two more 5770 single slot versions). Running a Sapphire Pure-Black MB with 4xPCIe slots.
Sun X4600-M2 not running
Sun X2100 #1 not running but maybe it will provide H/A for the next box...
Sun X2100 #2 running BTC-Mining-Proxy, apache/mysql, monitoring apps
Tres0 (2x 6870 MSI Hawk, 1x XFX 5770) room for one more single slot 5770. Running a Sapphire Pure-Black MB with 4xPCIe slots.
Tres1 (2x 6870 MSI Hawk, 1x XFX 5770) room for one more single slot 5770. Running a Sapphire Pure-Black MB with 4xPCIe slots.
APC-SmartUPS-1500VA

 I'm planning on removing the ultra40 boxes and replacing them with duplicates of the custom builds (the tres0 and tres1 boxes). And of course I'll be removing the X4600M2 box since it's taking up space and I'm not utilizing it... so that and the rest of the empty space will be filled with more boxes like the tres0.

I have more delta fans coming this week that will push 240cfm each (120mm) and those are going into quad0, tres0, and tres1.

You like? 

I like!  I assume most of this didn't cost you much at all...

You might also want to consider this card for the single slot version:
http://www.newegg.com/Product/Product.aspx?Item=N82E16814131433