|
Kartojal
|
 |
February 15, 2015, 11:06:54 AM |
|
If you will run 4x 3TB drives, what's the cheapest cpu would you suggest? -- I'm asking these because my ATOM 4GB (max) wasn't able to catch up (130sec+) before new block comes in, and my i7 x79 is a bit overkill for 24/7.
Athlon X4? Core2Duo / Pentium 2core?
Thanks
I have an older core2duo e6600 with 4gb ram running 2 x 4.5Tb usb drives but it takes 120+ seconds to scan them. I have a similar setup with amd apu a4-4000 and that takes a about 180+ seconds. I think a budget Intel Pentium G3258 3.2Ghz would be good, my next miner will have that cpu  |
|
|
|
|
|
|
|
|
The trust scores you see are subjective; they will change depending on who you have in your trust list. |
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
|
|
|
lagur
|
|
February 15, 2015, 01:02:55 PM |
|
If you will run 4x 3TB drives, what's the cheapest cpu would you suggest? -- I'm asking these because my ATOM 4GB (max) wasn't able to catch up (130sec+) before new block comes in, and my i7 x79 is a bit overkill for 24/7.
Athlon X4? Core2Duo / Pentium 2core?
Thanks
I have an older core2duo e6600 with 4gb ram running 2 x 4.5Tb usb drives but it takes 120+ seconds to scan them. I have a similar setup with amd apu a4-4000 and that takes a about 180+ seconds. I think a budget Intel Pentium G3258 3.2Ghz would be good, my next miner will have that cpu Wow thanks for the inputs... interesting results. |
|
|
|
|
|
|
|
Elmit
|
|
February 15, 2015, 01:07:16 PM |
|
I have sent a message from one burst account to another. It got never confirmed and after about one hour the deducted fee was returned. I tried three times, then I started to reduce the message size and at one point it succeeded.
That suggests that the size of the message may only have a certain character size.
If so, what is the size?
If so, could we suggest to the developer (whoever they are) that the message sending screen would show a count down.
|
|
|
|
|
mmmaybe
|
|
February 15, 2015, 01:17:33 PM
Last edit: February 15, 2015, 02:13:58 PM by mmmaybe |
|
Please explain in detail: 1. The CREATOR creates a new ATcrowdfunding case. 2. The general public can "donate" via this form which "at a certain block in the future", if "enough funds are collected" will be paid to XXX Please name XXX. IF XXX is the creator, then you can donate ANY time to the creator's address IF XXX is not the creator, then who is XXX  ? And how does the creator get access to the fund? XXX is the creator. However, the crowdfund has its own account YYY which holds the funds untill they are either payed out or returned to donators. When you use the html form, your donation goes to this YYY account. Therefore if you just donate to creator, you will not get the funds back if the CF does not reach the amount needed. Nor will the funds sent directly to the creator count towards fulfilling the CF goal (as they are not sent to CF's own account YYY). Is this a sufficient explanation? Therefore you can DONATE ANYTIME to the Creator! Thanks for confirming that! Please Elmit, can you stop with this nonsense...? Use the guides as recommended! |
|
|
|
|
mmmaybe
|
|
February 15, 2015, 01:24:04 PM
Last edit: February 15, 2015, 02:14:24 PM by mmmaybe |
|
Then you have done something wrong. If atcrowdfund.html is in /[wallet]/html/ui/ it will show. Perhaps check a guide again...? |
|
|
|
catbref
Member
 Offline
Activity: 106
Merit: 10
|
|
February 15, 2015, 01:28:46 PM |
|
I have sent a message from one burst account to another. It got never confirmed and after about one hour the deducted fee was returned. I tried three times, then I started to reduce the message size and at one point it succeeded.
That suggests that the size of the message may only have a certain character size.
If so, what is the size?
If so, could we suggest to the developer (whoever they are) that the message sending screen would show a count down.
I think I hit a similar issue where messages that ended with LF (unix linebreak) would get accepted by the API endpoint but not get transmitted over the network and so time out. These were messages sent with payments btw. |
|
|
|
|
|
mmmaybe
|
|
February 15, 2015, 01:30:24 PM
Last edit: February 15, 2015, 02:15:18 PM by mmmaybe |
|
Can someone explain in non-technical terms how I can go about donating to this cause? I don't have much to spare right now but I would love to at least give something.
Nice, thank you 1. Click here: http://burstcoin.info/d/cf and download the zip. 2. Open the zip and extract the html file (atcrowdfund.html). 3. Place atcrowdfund.html in your wallet, inside folder /[wallet]/html/ ui/ 4. Open your wallet with your password. 5. Copy/paste, or write, atcrowdfund.html at the end of the wallet's URL; it should look like this: - http://localhost:8125/atcrowdfund.htmlor - http://127.0.0.1:8125/atcrowdfund.html6. On the page opened, you will see the crowdfunding cases running now. 7. Chose the one you want to support and click "Pledge", and enter the sum you want to contribute with and click "Send". 8. Done! Remember that it will take awhile for you contribution to show up in the statistics, but it will be added eventually. Also: would not the pledged sum be reached, your contribution will be sent back to your wallet after the block seen at the page So it's "all-or-nothing" in a way, hence making it important to reach the goals. Please let me know if anything is unclear (Btw, the same steps goes for LuckyAT, the decentralized lottery running independent on BURST's blockchain. The html file for the LuckyAT is found in a .zip at http://burstcoin.info/d/lo/) Thanks! Sent you 100K Thanks a lot! That is a very nice amount I followed your instructions but the BURST did not come out of my account yet. Still not...? If you trust me, I can send it for you (and you sending me after it's confirmed). Will create a separate account, where possible the refund will end up and giving you the password. Lemme know. PM |
|
|
|
|
mmmaybe
|
|
February 15, 2015, 01:33:40 PM |
|
Elmit is now, along with tim, the only two ignored by me in this thread.
|
|
|
|
|
Elmit
|
|
February 15, 2015, 01:42:03 PM |
|
Then you have done something wrong. If atcrowdfund.html in /[wallet]/html/ui/ it will show. Perhaps check a guide again...? I have not changed anything! I have reloaded the page and now ALL Projects are gone! However, it still does show "powered by Automated Transactions and Burst." |
|
|
|
ltcnim
Legendary
Offline
Activity: 914
Merit: 1001
|
|
February 15, 2015, 01:46:01 PM |
|
burst.ga:
sorry guys - the pool wedged overnight (actually a 3rd-party library wedged due a thread deadlock)
I've put a new fix in place that avoids that chunk of mutex-locking code.
I know it's frustrating that the pool goes down - I feel your pain.
was running for a few minutes, now it's down again... |
|
|
|
|
Elmit
|
|
February 15, 2015, 01:47:28 PM |
|
Elmit is now, along with tim, the only two ignored by me in this thread.
Not to answer correctly shows your knowledge! Since mmmaybe ignore me, I am sure somebody with knowledge will answer! Recap of open questions: 1. How to get a node in Burst running? 2. Why no projects are any more shown in ATcrowdfunding.html? 3. When the Donation button will we included in ATcrowdfunding.html? 4. Who are the developer of Burst? |
|
|
|
|
Elmit
|
|
February 15, 2015, 01:49:17 PM |
|
burst.ga:
sorry guys - the pool wedged overnight (actually a 3rd-party library wedged due a thread deadlock)
I've put a new fix in place that avoids that chunk of mutex-locking code.
I know it's frustrating that the pool goes down - I feel your pain.
was running for a few minutes, now it's down again... Maybe Windows is not the right platform for that kind of task.  |
|
|
|
|
twats
|
|
February 15, 2015, 01:50:35 PM |
|
i cant open wallet it gives me an error that is java isnt installed at your pc please go java site and download it i want to help so |
|
|
|
|
|
seasonw
|
|
February 15, 2015, 01:53:34 PM |
|
If you will run 4x 3TB drives, what's the cheapest cpu would you suggest? -- I'm asking these because my ATOM 4GB (max) wasn't able to catch up (130sec+) before new block comes in, and my i7 x79 is a bit overkill for 24/7.
Athlon X4? Core2Duo / Pentium 2core?
Thanks
I have an older core2duo e6600 with 4gb ram running 2 x 4.5Tb usb drives but it takes 120+ seconds to scan them. I have a similar setup with amd apu a4-4000 and that takes a about 180+ seconds. I think a budget Intel Pentium G3258 3.2Ghz would be good, my next miner will have that cpu Wow thanks for the inputs... interesting results. Thanks lagur and riskyfire for sharing the results. This is very important that I think raspberry pi B+ (that we wanted to try) should not work great. A budget PC will be the only option for burst mining machine. |
|
|
|
|
vbcs
Full Member
Offline
Activity: 137
Merit: 100
AT - Automated Transactions - CIYAM Developer
|
|
February 15, 2015, 01:53:40 PM |
|
Then you have done something wrong. If atcrowdfund.html in /[wallet]/html/ui/ it will show. Perhaps check a guide again...? I have not changed anything! I have reloaded the page and now ALL Projects are gone! However, it still does show "powered by Automated Transactions and Burst." It happens to me also sometimes. If you stop and start burst it will be ok. |
1ELCU3hahFLMPPqsoHS2Mg2Rqjya6VXjAW
|
|
|
|
twats
|
|
February 15, 2015, 01:55:14 PM |
|
i cant open wallet it gives me an error that is java isnt installed at your pc please go java site and download it i want to help so any helpp ?  |
|
|
|
|
|
Elmit
|
|
February 15, 2015, 02:00:37 PM |
|
Then you have done something wrong. If atcrowdfund.html in /[wallet]/html/ui/ it will show. Perhaps check a guide again...? I have not changed anything! I have reloaded the page and now ALL Projects are gone! However, it still does show "powered by Automated Transactions and Burst." It happens to me also sometimes. If you stop and start burst it will be ok. I tried this just now and indeed that solved the problem. The last lines I saw in the log file was: burst_1.2.2$ tail -f nohup.out at org.eclipse.jetty.servlet.ServletHandler.doScope(ServletHandler.java:517) at org.eclipse.jetty.server.handler.ScopedHandler.handle(ScopedHandler.java:141) at org.eclipse.jetty.server.handler.HandlerWrapper.handle(HandlerWrapper.java:97) at org.eclipse.jetty.server.Server.handle(Server.java:497) at org.eclipse.jetty.server.HttpChannel.handle(HttpChannel.java:311) at org.eclipse.jetty.server.HttpConnection.onFillable(HttpConnection.java:248) at org.eclipse.jetty.io.AbstractConnection$2.run(AbstractConnection.java:540) at org.eclipse.jetty.util.thread.QueuedThreadPool.runJob(QueuedThreadPool.java:610) at org.eclipse.jetty.util.thread.QueuedThreadPool$3.run(QueuedThreadPool.java:539) at java.lang.Thread.run(Thread.java:745) I am not sure if that can help to catch such situations. |
|
|
|
|
Elmit
|
|
February 15, 2015, 02:06:21 PM |
|
i cant open wallet it gives me an error that is java isnt installed at your pc please go java site and download it i want to help so Do you have java installed? Did you follow the instruction to install java? Maybe you need to re-install java, maybe your Virus utility disabled java (happened to my notebook once) |
|
|
|
|
twats
|
|
February 15, 2015, 02:09:54 PM |
|
i cant open wallet it gives me an error that is java isnt installed at your pc please go java site and download it i want to help so Do you have java installed? Did you follow the instruction to install java? Maybe you need to re-install java, maybe your Virus utility disabled java (happened to my notebook once) i did reinstall after error and everything is same and instructions what did you mean with it its simple dl installer and install it. |
|
|
|
|
|
