KanoPool since 2014 🐈 - PPLNS and Solo 0.5% fee - Worldwide - 2436 blocks

[thedreamer]

not a bad morning so far. waking up to 4 blocks and a steady 35PH.

When will those people learn that use kano for backup to make it their primary.

Ding ding ding.. 

[clgrissom3]

not a bad morning so far. waking up to 4 blocks and a steady 35PH.

When will those people learn that use kano for backup to make it their primary.

Ding ding ding..  

Love the sound of a new block!  This one is by hjry with 126THs...his 4th kano block!

[masterwolf]

Five with lots of time left

[Sierra8561]

Great day!!!

[firetreeactual]

I could definitely get used to this...the new S7 should ship Monday, so another little bit for the stew... 

do kindly update us on the "performance" of the B16 S7 . . .

more powah to the pool.

I will do that. I'm working on some low-cost cooling/noise mitigation logistics that may be of interest to "mini" miners who can't stuff their hardware in the garage (because they don't have a garage)...I'll post it on a more appropriate thread, though.

Yeah...it was nice to wake up to blocks. I'm making enough now that the third (and last...it will max out my power) S7 will likely be paid for by BTC from current production. That's for 1 May. The plan is to be at full capacity before the halving, as that will provide me with a decent base for future projection/planning. The info I glean here, and the new acquaintances/relationships generated, from the board is invaluable.

[citricut]

Hi all,

I thought I'd just say hello

I started mining a week ago with a new S7. Tried a day on AntPool then started reading this forum and came across this pool. I've been mining with Kano the last few days and I'm very happy with the rewards after my N Hashrate stabilized.

On the hardware side, I got caught by customs and they ripped me off so there's no way I will achieve ROI with this S7. I live in an apartment building and luckily enough have managed to have Internet in my basement cellar using a PLC adapter (I live on the 6th floor!!) so no annoyances whatsoever from the machine. Also, incredibly good ping and bandwidth, so very pleased with this PLC adapter.

I'm doing this more as a hobby but some future plans are:

* Get a second unit, this time second hand probably
* investigate about mounting some S7's into a U4 rack case and take them to a hosting place
* Join some friends to the project and look for a dedicated space to put some machines

I always keep an eye on this thread so I will probably come back with more questions. Pleasure to share the adventure with you!

Cheers

[not.you]

Would not mind to see the rules changed to track the highest share of a solved block for the month, hehe. Mine was a 8.56T

I thought the same thing when I hit a 3.98T share but there was a 13 or 14T share a page or two back.

[clgrissom3]

Hi all,

I thought I'd just say hello

I started mining a week ago with a new S7. Tried a day on AntPool then started reading this forum and came across this pool. I've been mining with Kano the last few days and I'm very happy with the rewards after my N Hashrate stabilized.

On the hardware side, I got caught by customs and they ripped me off so there's no way I will achieve ROI with this S7. I live in an apartment building and luckily enough have managed to have Internet in my basement cellar using a PLC adapter (I live on the 6th floor!!) so no annoyances whatsoever from the machine. Also, incredibly good ping and bandwidth, so very pleased with this PLC adapter.

I'm doing this more as a hobby but some future plans are:

* Get a second unit, this time second hand probably
* investigate about mounting some S7's into a U4 rack case and take them to a hosting place
* Join some friends to the project and look for a dedicated space to put some machines

I always keep an eye on this thread so I will probably come back with more questions. Pleasure to share the adventure with you!

Cheers

Welcome to the Kano CKPool!  We are a crazy bunch at times but the more, the merrier!  

You've made a good choice by pointing your machine here.  You will not find any better pool operators than kano and -ck (ckolivas), the developers of the CKPool software and the two main developers of cgminer which runs on practically every piece of hardware out there.  These guys have a special operation going here.

[Champion Of PvP Humb]

Excelent work and All good in this service?

[philipma1957]

19 hours and counting

(330.76%) 

 This could be the high block for the month of April

[citronick]

19 hours and counting

(330.76%) 

 This could be the high block for the month of April

all my rental BTCs is exhausted and ending soon, I hope the bunch of blocks will come soon....

[philipma1957]

(348.07%) 20h


well a good chance for the high to be done with right here and now.


I am going to cook up some eggs  and see if that works.

[Xircom]

Anyone here having the Firmware for Bitmain S5 with Cgminer 4.9.1c and 4.9.2 ?
Im doing a trial up against the 4.9.0 to see the difference at KANO.IS

[sorry2xs]

(348.07%) 20h


well a good chance for the high to be done with right here and now.


I am going to cook up some eggs  and see if that works.

eggs and grits with turkey bacon

[sorry2xs]

Anyone here having the Firmware for Bitmain S5 with Cgminer 4.9.1c and 4.9.2 ?
Im doing a trial up against the 4.9.0 to see the difference at KANO.IS

well i was not aware that there is a new kano S5 firmware

[Xircom]

Anyone here having the Firmware for Bitmain S5 with Cgminer 4.9.1c and 4.9.2 ?
Im doing a trial up against the 4.9.0 to see the difference at KANO.IS

well i was not aware that there is a new kano S5 firmware

Latest official Firmware from Bitmain is SD-S5-20150715.tar but with Cgminer 4.8.0 and a lot of hardware errors on the S5`s, but the 4.9.0 reduces the errors in general on the S5.
I know that Cgminer 4.9.1c and 4.9.2 are S5 ready, but I cant seem to find them anywhere.

[sorry2xs]

Anyone here having the Firmware for Bitmain S5 with Cgminer 4.9.1c and 4.9.2 ?
Im doing a trial up against the 4.9.0 to see the difference at KANO.IS

well i was not aware that there is a new kano S5 firmware

Latest official Firmware from Bitmain is SD-S5-20150715.tar but with Cgminer 4.8.0 and a lot of hardware errors on the S5`s, but the 4.9.0 reduces the errors in general on the S5.
I know that Cgminer 4.9.1c and 4.9.2 are S5 ready, but I cant seem to find them anywhere.

i believe the creators have not made it available for the S5 yet i could be wrong thou

[Xircom]

Those 2 firmwares are not official firmwares for the S5`s.
I need the unofficial build of S5 firmware, if any one got them ?

[zOU]

Those 2 firmwares are not official firmwares for the S5`s.
I need the unofficial build of S5 firmware, if any one got them ?

log in ssh (root/admin)

Code:

cd /usr/bin
mv cgminer cgminer.bak
wget http://ck.kolivas.org/apps/cgminer/antminer/s5/4.9.0-150105/cgminer
chmod +x cgminer
/etc/init.d/cgminer.sh restart

note this is not persistent and will revert to 4.8.0 (or whatever the S5 FW has) after a power outage

[Alehandros]

hope this isn't another block 402342