old bug on old drivers. On blockchain and newer (18.3.4) its working as its supposed to. The easiest fix is to update your drivers will try today ) i hope it helps, if not i will look into it. checked 18.3.4 today. [2018-04-29 17:41:59] GPU0: 465.0 H/S [T: 52c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz] [2018-04-29 17:41:59] GPU1: 435.0 H/S [T: 62c, RPM: 904, CC: 1150 MHz, MC: 1800 MHz] [2018-04-29 17:41:59] GPU2: 499.0 H/S [T: 60c, RPM: 860, CC: 1150 MHz, MC: 1900 MHz] [2018-04-29 17:41:59] GPU3: 499.0 H/S [T: 59c, RPM: 813, CC: 1150 MHz, MC: 1900 MHz] [2018-04-29 17:41:59] GPU4: 460.0 H/S [T: 60c, RPM: 870, CC: 1150 MHz, MC: 1900 MHz] [2018-04-29 17:41:59] GPU5: 449.0 H/S [T: 53c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz] [2018-04-29 17:41:59] GPU6: 397.0 H/S [T: 61c, RPM: 863, CC: 1150 MHz, MC: 1900 MHz] [2018-04-29 17:41:59] GPU7: 437.0 H/S [T: 62c, RPM: 815, CC: 1150 MHz, MC: 1900 MHz] [2018-04-29 17:41:59] GPU8: 496.0 H/S [T: 59c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz] [2018-04-29 17:41:59] GPU9: 492.0 H/S [T: 61c, RPM: 1061, CC: 1150 MHz, MC: 1900 MHz] [2018-04-29 17:41:59] GPU10: 452.0 H/S [T: 52c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz] [2018-04-29 17:41:59] GPU11: 499.0 H/S [T: 62c, RPM: 924, CC: 1150 MHz, MC: 1900 MHz]
however config includes following: "target_temperature" : 55, "target_fan_speed" : 3300, in general section target fan speed basically not set? here is the same drivers w your miner, but with 3-rd party overdrive util: [2018-04-29 17:49:59] GPU0: 495.0 H/S [T: 49c, RPM: 3083, CC: 1150 MHz, MC: 1900 MHz] [2018-04-29 17:49:59] GPU1: 457.0 H/S [T: 52c, RPM: 3196, CC: 1150 MHz, MC: 1800 MHz] [2018-04-29 17:49:59] GPU2: 411.0 H/S [T: 49c, RPM: 3297, CC: 1150 MHz, MC: 1900 MHz] [2018-04-29 17:49:59] GPU3: 464.0 H/S [T: 50c, RPM: 3384, CC: 1150 MHz, MC: 1900 MHz] [2018-04-29 17:49:59] GPU4: 461.0 H/S [T: 51c, RPM: 3305, CC: 1150 MHz, MC: 1900 MHz] [2018-04-29 17:49:59] GPU5: 494.0 H/S [T: 52c, RPM: 3378, CC: 1150 MHz, MC: 1900 MHz] [2018-04-29 17:49:59] GPU6: 494.0 H/S [T: 52c, RPM: 3354, CC: 1150 MHz, MC: 1900 MHz] [2018-04-29 17:49:59] GPU7: 458.0 H/S [T: 53c, RPM: 3229, CC: 1150 MHz, MC: 1900 MHz] [2018-04-29 17:49:59] GPU8: 499.0 H/S [T: 50c, RPM: 3393, CC: 1150 MHz, MC: 1900 MHz] [2018-04-29 17:49:59] GPU9: 499.0 H/S [T: 53c, RPM: 3234, CC: 1150 MHz, MC: 1900 MHz] [2018-04-29 17:49:59] GPU10: 493.0 H/S [T: 50c, RPM: 3116, CC: 1150 MHz, MC: 1900 MHz] [2018-04-29 17:49:59] GPU11: 461.0 H/S [T: 52c, RPM: 3295, CC: 1150 MHz, MC: 1900 MHz] [2018-04-29 17:49:59] Total: 5686.0 H/S
From the first page : V1.4.8- Added support for new ArtoCash algo - Added fast pool switching when pressing P - Added target_temperature setting to gpu_conf too, if this option is used on top of config (value is > 0), gpu_conf setting is IGNORED- Added target_fan_speed setting to gpu_conf, atm must set it in RPM, not in percent, sorry Smiley - Minor bug fixes
|
|
|
How i use other pool and config file in 1 dir?
i wont in 1 folder where is SRBminer.exe put 1.bat 2.bat 3.bat and all bat start other pool coin with other pool and other config. Now i must use 10 folder for 10 coin. in sgminer i put in bat file this: sgminer -c sgminer.conf --gpu-reorder sgminer -c sgmine2.conf --gpu-reorder sgminer -c sgminer3.conf --gpu-reorder
and 1 bat = 1 pool = 1 coin
in 1 folder = 1 srbminer.exe and 10 start.bat and 10 pool.txt and 10 config.txt
%EXE% -c config-haven.txt --pools pools-haven.txt --logfile log-haven.txt %EXE% -c config-graft.txt --pools pools-graft.txt --logfile log-graft.txt etc etc All in one dir. Thx but you are right, i will make it so you can put pools too in the config file, just have a few more options in my head before that to do
|
|
|
hello when i run it om my rigs
all time the program close
i try to underclock and do all things but all time the program close
what i can do for that ??
need much more info, if you want help.
|
|
|
Hello, there any plan to release linux version ?
not soon
|
|
|
How i use other pool and config file in 1 dir?
i wont in 1 folder where is SRBminer.exe put 1.bat 2.bat 3.bat and all bat start other pool coin with other pool and other config. Now i must use 10 folder for 10 coin. in sgminer i put in bat file this: sgminer -c sgminer.conf --gpu-reorder sgminer -c sgmine2.conf --gpu-reorder sgminer -c sgminer3.conf --gpu-reorder
and 1 bat = 1 pool = 1 coin
in 1 folder = 1 srbminer.exe and 10 start.bat and 10 pool.txt and 10 config.txt
%EXE% -c config-haven.txt --pools pools-haven.txt --logfile log-haven.txt %EXE% -c config-graft.txt --pools pools-graft.txt --logfile log-graft.txt etc etc All in one dir.
|
|
|
hi i have a question when i launch srbminer after a reboot i get 1350 hs per card and when i kill the process and relaunch it, i get 1500 - 1550 h per card do u know why ? the intensity is always 56 and i have reference vega 56 with stock bios thats not just on vegas, to be honest i don't know the reason
|
|
|
For H5GQ8H24MJR try this folks:
999000000000000022339D00CEDD6B4470551414B80D960B0040C400750314204A8900A00200000 018123745B92B3A16 Wowww!!! Amazing strap for 580 Hynix. I can get 1030 average (cryptonight-heavy), core clock 1200 and mem clock 2100. Thank you, Dok! Someone perhaps has great strap for 580 micron (cryptonight-heavy) that can be shared here? I hope you are using it with SRBMiner Hi Dok, indeed! I am using 1.4.6 at the moment as it is the most stable version for my rigs. Have you tried 1.4.9 ? If you have pool switching issues (from user to dev pool), this version fixes that.
|
|
|
doktor83 is there a way to preserve the openCL device order detection according to the HWinfo/atiflash/gpu-z order?
possibly yes, i think they order by busid, i will check that, just to finish up a few things first.
|
|
|
hi i have a question when i launch srbminer after a reboot i get 1350 hs per card and when i kill the process and relaunch it, i get 1500 - 1550 h per card do u know why ? the intensity is always 56 and i have reference vega 56 with stock bios is that on heavy algo?
|
|
|
https://bitcointalk.org/index.php?topic=2079202.new#newSet the static complexity, the cards are simply idle at a complexity of 1200 000
Will repost my reply from the sumo thread. Are you using SRBMiner, right?
I monitored the network traffic for a while and i'm sure your problem is caused by the bug in the mining software and is not related to the FairPool somehow. FairPool's stratum code utilizes sophisticated variable diff algorithm and it actually does its job quite well.
Just use opensource xmr-stak or xmrig.
Как-то прокомментируете? Somehow comment? i don't really understand what we are talking about here? Is the problem that the pool sets too high diff ? I myself am mining sumo at https://pool.sumokoin.com and it works great . sumo.fairpool.cloud (here all the powers) A person, to talk about not working, was not, he automatically raises the difficulty up to, say, 1200 000, and the cards are beaten empty or nothing until the pool changes complexity, much is lost !!!!! And in the post above, the creators of the pool say that the SRBMiner-CN error and it is necessary to use the other software !!!! Well did you try other software ? There is nothing special here, miner receives target from pool and does its hashing... it looks like their diff algo is too sophisticated The miner itself does not 'raise difficulty', it's something that the pool dictates.
|
|
|
https://bitcointalk.org/index.php?topic=2079202.new#newSet the static complexity, the cards are simply idle at a complexity of 1200 000
Will repost my reply from the sumo thread. Are you using SRBMiner, right?
I monitored the network traffic for a while and i'm sure your problem is caused by the bug in the mining software and is not related to the FairPool somehow. FairPool's stratum code utilizes sophisticated variable diff algorithm and it actually does its job quite well.
Just use opensource xmr-stak or xmrig.
Как-то прокомментируете? Somehow comment? i don't really understand what we are talking about here? Is the problem that the pool sets too high diff ? I myself am mining sumo at https://pool.sumokoin.com and it works great .
|
|
|
For H5GQ8H24MJR try this folks:
999000000000000022339D00CEDD6B4470551414B80D960B0040C400750314204A8900A00200000 018123745B92B3A16 Wowww!!! Amazing strap for 580 Hynix. I can get 1030 average (cryptonight-heavy), core clock 1200 and mem clock 2100. Thank you, Dok! Someone perhaps has great strap for 580 micron (cryptonight-heavy) that can be shared here? I hope you are using it with SRBMiner
|
|
|
Hello, is it possible to add an option to disable/enable windows gpus before start mining ?
Thanks
this is something i am already working on for the next version
|
|
|
@Doctor wtf
After connect to deffee pool no any more connect to user pool!!! I mine for you more than one hour!! Need version with disable devfee, i not greed bustard but...
Version 1.4.8
[2018-04-28 13:08:33] Total: 3527.0 H/S [2018-04-28 13:09:11] Pool accepted result 0x00004F90 [2018-04-28 13:10:01] Pool accepted result 0x00006EBA [2018-04-28 13:10:17] Pool difficulty: 94920 [2018-04-28 13:10:17] Pool sent a new job (ID: gyiozdozVZLAhV25eCHd+cE1oFiv) [2018-04-28 13:10:22] Pool accepted result 0x000013D3 [2018-04-28 13:10:25] Connected to devfee pool [2018-04-28 13:10:35] GPU0: 509.0 H/S [T: 56c, RPM: 2181, CC: 1230 MHz, MC: 1960 MHz] [2018-04-28 13:10:35] GPU1: 510.0 H/S [T: 57c, RPM: 2191, CC: 1230 MHz, MC: 1960 MHz] [2018-04-28 13:10:35] GPU2: 509.0 H/S [T: 56c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz] [2018-04-28 13:10:35] GPU3: 511.0 H/S [T: 57c, RPM: 2192, CC: 1230 MHz, MC: 1960 MHz] [2018-04-28 13:10:35] GPU4: 511.0 H/S [T: 57c, RPM: 2192, CC: 1230 MHz, MC: 1960 MHz] [2018-04-28 13:10:35] GPU5: 491.0 H/S [T: 64c, RPM: 2798, CC: 1230 MHz, MC: 1825 MHz] [2018-04-28 13:10:35] GPU6: 491.0 H/S [T: 62c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz] [2018-04-28 13:10:35] Total: 3532.0 H/S [2018-04-28 13:12:36] GPU0: 510.0 H/S [T: 56c, RPM: 2187, CC: 1230 MHz, MC: 1960 MHz] [2018-04-28 13:12:36] GPU1: 510.0 H/S [T: 57c, RPM: 2198, CC: 1230 MHz, MC: 1960 MHz] [2018-04-28 13:12:36] GPU2: 509.0 H/S [T: 56c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz] [2018-04-28 13:12:36] GPU3: 511.0 H/S [T: 57c, RPM: 2195, CC: 1230 MHz, MC: 1960 MHz] [2018-04-28 13:12:36] GPU4: 510.0 H/S [T: 57c, RPM: 2195, CC: 1230 MHz, MC: 1960 MHz] [2018-04-28 13:12:36] GPU5: 492.0 H/S [T: 64c, RPM: 2805, CC: 1230 MHz, MC: 1825 MHz] [2018-04-28 13:12:36] GPU6: 498.0 H/S [T: 62c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz] [2018-04-28 13:12:36] Total: 3540.0 H/S [2018-04-28 13:14:38] GPU0: 510.0 H/S [T: 56c, RPM: 2192, CC: 1230 MHz, MC: 1960 MHz] [2018-04-28 13:14:38] GPU1: 510.0 H/S [T: 57c, RPM: 2196, CC: 1230 MHz, MC: 1960 MHz] [2018-04-28 13:14:38] GPU2: 509.0 H/S [T: 56c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz] [2018-04-28 13:14:38] GPU3: 510.0 H/S [T: 57c, RPM: 2208, CC: 1230 MHz, MC: 1960 MHz] [2018-04-28 13:14:38] GPU4: 511.0 H/S [T: 57c, RPM: 2182, CC: 1230 MHz, MC: 1960 MHz] [2018-04-28 13:14:38] GPU5: 492.0 H/S [T: 64c, RPM: 2785, CC: 1230 MHz, MC: 1825 MHz] [2018-04-28 13:14:38] GPU6: 483.0 H/S [T: 62c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz] [2018-04-28 13:14:38] Total: 3525.0 H/S [2018-04-28 13:16:40] GPU0: 510.0 H/S [T: 57c, RPM: 2185, CC: 1230 MHz, MC: 1960 MHz] [2018-04-28 13:16:40] GPU1: 510.0 H/S [T: 57c, RPM: 2188, CC: 1230 MHz, MC: 1960 MHz] [2018-04-28 13:16:40] GPU2: 509.0 H/S [T: 56c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz] [2018-04-28 13:16:40] GPU3: 511.0 H/S [T: 57c, RPM: 2205, CC: 1230 MHz, MC: 1960 MHz] [2018-04-28 13:16:40] GPU4: 510.0 H/S [T: 57c, RPM: 2185, CC: 1230 MHz, MC: 1960 MHz] [2018-04-28 13:16:40] GPU5: 491.0 H/S [T: 64c, RPM: 2785, CC: 1230 MHz, MC: 1825 MHz] [2018-04-28 13:16:40] GPU6: 495.0 H/S [T: 62c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
--------------
[2018-04-28 14:41:45] GPU0: 510.0 H/S [T: 56c, RPM: 2178, CC: 1230 MHz, MC: 1960 MHz] [2018-04-28 14:41:45] GPU1: 510.0 H/S [T: 57c, RPM: 2195, CC: 1230 MHz, MC: 1960 MHz] [2018-04-28 14:41:45] GPU2: 508.0 H/S [T: 56c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz] [2018-04-28 14:41:45] GPU3: 511.0 H/S [T: 57c, RPM: 2195, CC: 1230 MHz, MC: 1960 MHz] [2018-04-28 14:41:45] GPU4: 510.0 H/S [T: 57c, RPM: 2192, CC: 1230 MHz, MC: 1960 MHz] [2018-04-28 14:41:45] GPU5: 492.0 H/S [T: 64c, RPM: 2798, CC: 1230 MHz, MC: 1825 MHz] [2018-04-28 14:41:45] GPU6: 491.0 H/S [T: 62c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz] [2018-04-28 14:41:45] Total: 3532.0 H/S
you need to read the first page too, there is always fresh info about version updates. Also it wasn't mining for me, it got stuck at pool change, so basically it wasn't doing anything.
|
|
|
Dok I am having kinda of an issue with my rig when I remotely connect to it via TeamViewer. After 30-40 seconds one of my card crashes and the miner restarts. Could this issue be with the miner or with my rig in general? I have never had such problem before and I have tried many different miners so far.
I have noticed also the same problem, but I experience it with another miners too. The problem may be with your GPU itself. don't know really what could cause this issue, is the card that is crashing the main one, that has a dongle or monitor plugged in ?
|
|
|
Running O.K. on RX 570's. Speed is not quite there yet ( NormalV7 ) because of the straps, but at least its stable. Keep up the good work sir You must point that 570 is Sapphire Nitro+. It's good quality cards. On not so good cards like MSI Gaming X (not plus) 2100MHz isn't stable on doctor's strap. Max 2075-2085MHz and it's only 950-960 h/s gives. On 2100MHz comp hangs after few minutes same as 2150, wich hang comp nearly after launch of miner. Must say - anyway doctor's strap "999..." is a little better than "777..." strap. It gives max 930 h/s on 2100-2125MHz. P.S. I think that doctor's strap can be improved for stability to reach more memory speed on not good quality cards, but it'll lower hashrate... It's need to work on it and test. Doctor, can you modify your strap a little for improve stability? At least say what it's need to change and I can test it on MSI. as you said, it needs a lot of trial and test. I don't have time to play with it. You got the strap, now its on you to modify it to work as you want. And don't be sad that SRBminer is faster than GGS, Zawawa will probably tune it more. Maybe you can ask him to help you modify the strap to make it work better on MSI.
|
|
|
old bug on old drivers. On blockchain and newer (18.3.4) its working as its supposed to. The easiest fix is to update your drivers will try today ) i hope it helps, if not i will look into it.
|
|
|
old bug on old drivers. On blockchain and newer (18.3.4) its working as its supposed to. The easiest fix is to update your drivers
|
|
|
Hi guys,
I'm mining with two AMD R9 270. They both show the same hashrate, but when I press 's' for stats it says there is a hardware error on GPU 0. It's been a long time since I mined so I dont remember if this error is regarding packets/mining or if there is an error with my card? I haven't tweeked anything yet so they are not running at full capacity yet.
it displays the number of badly computed results. If that number is too high, try lowering the intensity.
|
|
|
ARTOCASH Hard fork at block 70000 (possibly tomorrow) config.txt :{ "cryptonight_type" : "artocash", "intensity" : 0, "double_threads" : true } pools.txt:{ "pools" : [ {"pool_use_tls" : false, "keepalive" : true, "pool" : "pool.arto.cash:3333", "wallet" : "YOUR-WALLET", "password" : "x"} ] }
|
|
|
|