|
Pennywis3
|
 |
April 28, 2018, 08:00:11 AM |
|
is this hynix mjr with 8gb? If yes mind to share your strap?
Yap, hynix MJR and the strap that Doktor83 posted. |
|
|
|
|
livada
Newbie
 Offline
Activity: 417
Merit: 0
|
|
April 28, 2018, 08:41:47 AM |
|
v1.4.9 all work fine - 3*vega56 "cryptonight_type" : "heavy", "double_threads" : true, "gpu_conf" : [ { "id" : 0, "intensity" :56, "worksize" : 8, "threads" : 2, "target_temperature" : 59}, { "id" : 1, "intensity" : 56, "worksize" : 8, "threads" : 2, "target_temperature" : 58}, { "id" : 2, "intensity" : 56, "worksize" : 8, "threads" : 2, "target_temperature" : 57}, https://image.prntscr.com/image/LbOnbAGJSR65QvOTuaZPGg.jpgYour can share OverClock with overdriveNtool. I'm mine with SRBMinerTool but hashrate not good Cryptonight V7 run with 1400, CryptoNight Heavy run 1200  OverDriveNTool https://ibb.co/dx6Pgxi not use overdrive. i use watman. on pictures see gpu mhz and i use 900mv for gpu and mem 1400for v7 and 1200 for heavy is to smal HR. HBB memory stack - when hbb not start i chg memory to 900mhz and gpu to -10% and start and start and start .and HR go on normal. when start ok i bask gpu and mem to normal. i try intensity 57 or 58 gor hevy and HR dovn to 1200 . 56 is max intensiti for me. try with 50 intensity and go up for 2 and see. in v7 my max intesitiy is 120. try with 114 -116 -118 - i have 1950Hr in v7 |
|
|
|
|
|
UnclWish
|
|
April 28, 2018, 08:52:48 AM
Last edit: April 28, 2018, 09:19:11 AM by UnclWish |
|
For H5GQ8H24MJR try this folks:
999000000000000022339D00CEDD6B4470551414B80D960B0040C400750314204A8900A00200000 018123745B92B3A16  Thank you so much. These are the best timings for my Asus RX 580 Dual OC. Now I get 1000 H/s in cryptonightV7 & more in heavy  Edit: GPU 1250 - Memory 2120 MHz (Stable for now, at 2130 I get artifacts on screen) "intensity" : 122, "worksize" : 8, "threads" : 2 Intensity 122 - Ohhh! Don't you recieve sometimes "nan H/S" on miner? Try to press the "h" key about minute and look. I think that you'll see that sometimes speed will be "nan H/s". This means that intensity is too high. |
|
|
|
|
Neophyte42
Newbie
Offline
Activity: 2
Merit: 0
|
|
April 28, 2018, 09:32:02 AM |
|
Someone can help me?
I need config for vega 56... I have only 1820 h/s (1485 core/920 mem)
What algo are you mining and what are your current settings? Easier to start from where you are to see if anyone can help. v7 - XMR. Gigabyte Vega 56. 1) BlockChain Drivers: 900/920 -100mV: intensity 106-112, worksize 8, threads 2 - 1800-1860 h/s and on 2) Adrenalin 18.3.4: 1500/920 intensity 106-112, worksize 8, threads 2 - 1800-1860 h/s  Errors appear on 920+ memory |
|
|
|
|
eduardooaz
Newbie
Offline
Activity: 24
Merit: 0
|
|
April 28, 2018, 09:34:58 AM |
|
What is the best intensity for RX 580 8GB you guys getting?
|
|
|
|
|
mk111
Jr. Member
Offline
Activity: 230
Merit: 1
|
|
April 28, 2018, 09:57:45 AM |
|
Any advice please? 4 x Vega 56 Reference cards with Vega 64 BIOS. Powerplay tables applied and settings applied with OverdriveNTool. Getting 2010H/s per card mining CryptonightV7 which is great but now I want to mine Haven (Heavy) and I am unable to get more than 1380H/s per card. SRB config when mining Haven: { "id" : 0, "intensity" : 56, "worksize" : 16, "threads" : 2}, { "id" : 1, "intensity" : 56, "worksize" : 16, "threads" : 2}, { "id" : 2, "intensity" : 56, "worksize" : 16, "threads" : 2}, { "id" : 3, "intensity" : 56, "worksize" : 16, "threads" : 2},  Thanks! |
|
|
|
|
Archangel9999
Newbie
Offline
Activity: 9
Merit: 0
|
|
April 28, 2018, 09:58:27 AM |
|
Hello, is it possible to add an option to disable/enable windows gpus before start mining ?
Thanks
|
|
|
|
|
lebuawu2
Jr. Member
Offline
Activity: 176
Merit: 2
|
|
April 28, 2018, 10:08:49 AM |
|
is this hynix mjr with 8gb? If yes mind to share your strap?
Yap, hynix MJR and the strap that Doktor83 posted. what's your intensity work size and thread ? max I can get is 995 h/s with your core clock and mem clock setting. I just realize that strap is different with strap from pimp my strap SRBPolaris. |
|
|
|
|
livada
Newbie
Offline
Activity: 417
Merit: 0
|
|
April 28, 2018, 10:12:46 AM |
|
Any advice please? 4 x Vega 56 Reference cards with Vega 64 BIOS. Powerplay tables applied and settings applied with OverdriveNTool. Getting 2010H/s per card mining CryptonightV7 which is great but now I want to mine Haven (Heavy) and I am unable to get more than 1380H/s per card. SRB config when mining Haven: { "id" : 0, "intensity" : 56, "worksize" : 16, "threads" : 2}, { "id" : 1, "intensity" : 56, "worksize" : 16, "threads" : 2}, { "id" : 2, "intensity" : 56, "worksize" : 16, "threads" : 2}, { "id" : 3, "intensity" : 56, "worksize" : 16, "threads" : 2}, https://www.upload.ee/image/8377665/Vega_Heavy.jpgThanks! try worksize" : 8 and start with 54 intensity if not work down gpu and mem 10% and start again . hbb memory not start corect. after start corect chg memory and gpu back. my v7 work1950 hevy 1500 but for heavy i must push down memory and gpu 2% i use ony 900mv for gpu and memory |
|
|
|
|
|
UnclWish
|
|
April 28, 2018, 10:43:30 AM |
|
is this hynix mjr with 8gb? If yes mind to share your strap?
Yap, hynix MJR and the strap that Doktor83 posted. what's your intensity work size and thread ? max I can get is 995 h/s with your core clock and mem clock setting. I just realize that strap is different with strap from pimp my strap SRBPolaris. Try intensity 104 worksize 8 threads 2 |
|
|
|
|
rednoW
Legendary
Offline
Activity: 1510
Merit: 1003
|
|
April 28, 2018, 11:09:08 AM |
|
Cast xmr works better for vega and heavy. Srbminer is best for v7
|
|
|
|
|
eduardooaz
Newbie
Offline
Activity: 24
Merit: 0
|
|
April 28, 2018, 11:24:15 AM |
|
I have a couple of questions:
1) Has doktor83 released the source code of SRBminer?
IMHO, it's crucial to have the source code of any possible improvements, so that we don't end up with a Claymore v9.7 situation (the author has even refused BTC/ETH donations to release the source code to the community).
2) How is it possible that Claymore v9.7 can use the entire memory with 15.7.1 Catalyst driver, but other miners cannot do the same? Is there any OpenCL hack that makes 14.4 drivers redundant?
I don't even know if it's possible to copy/paste the OpenCL dll file from 14.4 to 15.7.1 or something like that to detect the memory properly...
1. No, and won't do it. Why ? As soon as i release it, people will remove devfee, and upload that version to the forum and everywhere else. If that happens, i won't work on the miner anymore. Why ? Look at SRBPolaris, it's free, you know how much donation i got for it ? About 150$ maybe 200$. But of course lot of people use it. 2. Claymore is a magician, he probably worked at AMD and knows all the good insider stuff  I agree with your fee and i do belive you should force people for a fee, i just ask that you keep it down and low like you got now, we dont need greddy fees of 2%. Continue the good work, i left xrm because of the hight fees, about hash rate i am getting around same thing in heavy algo but the hasrate sometimes isnt the same when i start, sometimes i start hashing just after restarted pc and my 2 rx 580 8gb dual tread doing around 950, other times they only start doing 850 and stick with it, i basicaly am always restarting pc till they do 950 h/s and they will hold. Its strange, you know why i am having this problem? I got loads of virtual memory and 8gb ram. |
|
|
|
|
eduardooaz
Newbie
Offline
Activity: 24
Merit: 0
|
|
April 28, 2018, 11:36:10 AM |
|
my ASUS STRIX rx570 4gb cards, wouldn't go more than I=29, hashing at 500~600 H/s, no matter what clock and memory settings I put in AB. what can be the problem?
at the same time, some of my RX470 8gb nitro+ are hashing at I=50 and 850-950H/s on one rig, and I=41 and 750-800H/s on the other..
Contact Mattthev, he'll sort you out with some great memory straps to flash your GPUs with in case you haven't got decent ones. I assume you've set your intensity, worksize and amount ot threads properly? Is there better timmings then the ones of PolarisEditor? Like that give good boosts. |
|
|
|
|
ipe4enko
Newbie
Offline
Activity: 34
Merit: 0
|
|
April 28, 2018, 11:46:19 AM |
|
@doktor83 wtf
After connect to deffee pool no any more connect to user pool!!! I mine for you more than one hour!!
Need version with disable devfee, i not greed bustard but...
Version 1.4.8
[2018-04-28 13:08:33] Total: 3527.0 H/S
[2018-04-28 13:09:11] Pool accepted result 0x00004F90
[2018-04-28 13:10:01] Pool accepted result 0x00006EBA
[2018-04-28 13:10:17] Pool difficulty: 94920
[2018-04-28 13:10:17] Pool sent a new job (ID: gyiozdozVZLAhV25eCHd+cE1oFiv)
[2018-04-28 13:10:22] Pool accepted result 0x000013D3
[2018-04-28 13:10:25] Connected to devfee pool
[2018-04-28 13:10:35] GPU0: 509.0 H/S [T: 56c, RPM: 2181, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:10:35] GPU1: 510.0 H/S [T: 57c, RPM: 2191, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:10:35] GPU2: 509.0 H/S [T: 56c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
[2018-04-28 13:10:35] GPU3: 511.0 H/S [T: 57c, RPM: 2192, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:10:35] GPU4: 511.0 H/S [T: 57c, RPM: 2192, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:10:35] GPU5: 491.0 H/S [T: 64c, RPM: 2798, CC: 1230 MHz, MC: 1825 MHz]
[2018-04-28 13:10:35] GPU6: 491.0 H/S [T: 62c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
[2018-04-28 13:10:35] Total: 3532.0 H/S
[2018-04-28 13:12:36] GPU0: 510.0 H/S [T: 56c, RPM: 2187, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:12:36] GPU1: 510.0 H/S [T: 57c, RPM: 2198, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:12:36] GPU2: 509.0 H/S [T: 56c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
[2018-04-28 13:12:36] GPU3: 511.0 H/S [T: 57c, RPM: 2195, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:12:36] GPU4: 510.0 H/S [T: 57c, RPM: 2195, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:12:36] GPU5: 492.0 H/S [T: 64c, RPM: 2805, CC: 1230 MHz, MC: 1825 MHz]
[2018-04-28 13:12:36] GPU6: 498.0 H/S [T: 62c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
[2018-04-28 13:12:36] Total: 3540.0 H/S
[2018-04-28 13:14:38] GPU0: 510.0 H/S [T: 56c, RPM: 2192, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:14:38] GPU1: 510.0 H/S [T: 57c, RPM: 2196, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:14:38] GPU2: 509.0 H/S [T: 56c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
[2018-04-28 13:14:38] GPU3: 510.0 H/S [T: 57c, RPM: 2208, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:14:38] GPU4: 511.0 H/S [T: 57c, RPM: 2182, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:14:38] GPU5: 492.0 H/S [T: 64c, RPM: 2785, CC: 1230 MHz, MC: 1825 MHz]
[2018-04-28 13:14:38] GPU6: 483.0 H/S [T: 62c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
[2018-04-28 13:14:38] Total: 3525.0 H/S
[2018-04-28 13:16:40] GPU0: 510.0 H/S [T: 57c, RPM: 2185, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:16:40] GPU1: 510.0 H/S [T: 57c, RPM: 2188, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:16:40] GPU2: 509.0 H/S [T: 56c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
[2018-04-28 13:16:40] GPU3: 511.0 H/S [T: 57c, RPM: 2205, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:16:40] GPU4: 510.0 H/S [T: 57c, RPM: 2185, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:16:40] GPU5: 491.0 H/S [T: 64c, RPM: 2785, CC: 1230 MHz, MC: 1825 MHz]
[2018-04-28 13:16:40] GPU6: 495.0 H/S [T: 62c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
--------------
[2018-04-28 14:41:45] GPU0: 510.0 H/S [T: 56c, RPM: 2178, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 14:41:45] GPU1: 510.0 H/S [T: 57c, RPM: 2195, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 14:41:45] GPU2: 508.0 H/S [T: 56c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
[2018-04-28 14:41:45] GPU3: 511.0 H/S [T: 57c, RPM: 2195, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 14:41:45] GPU4: 510.0 H/S [T: 57c, RPM: 2192, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 14:41:45] GPU5: 492.0 H/S [T: 64c, RPM: 2798, CC: 1230 MHz, MC: 1825 MHz]
[2018-04-28 14:41:45] GPU6: 491.0 H/S [T: 62c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
[2018-04-28 14:41:45] Total: 3532.0 H/S
|
|
|
|
|
|
doktor83 (OP)
|
|
April 28, 2018, 11:50:45 AM |
|
@Doctor wtf
After connect to deffee pool no any more connect to user pool!!! I mine for you more than one hour!!
Need version with disable devfee, i not greed bustard but...
Version 1.4.8
[2018-04-28 13:08:33] Total: 3527.0 H/S
[2018-04-28 13:09:11] Pool accepted result 0x00004F90
[2018-04-28 13:10:01] Pool accepted result 0x00006EBA
[2018-04-28 13:10:17] Pool difficulty: 94920
[2018-04-28 13:10:17] Pool sent a new job (ID: gyiozdozVZLAhV25eCHd+cE1oFiv)
[2018-04-28 13:10:22] Pool accepted result 0x000013D3
[2018-04-28 13:10:25] Connected to devfee pool
[2018-04-28 13:10:35] GPU0: 509.0 H/S [T: 56c, RPM: 2181, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:10:35] GPU1: 510.0 H/S [T: 57c, RPM: 2191, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:10:35] GPU2: 509.0 H/S [T: 56c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
[2018-04-28 13:10:35] GPU3: 511.0 H/S [T: 57c, RPM: 2192, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:10:35] GPU4: 511.0 H/S [T: 57c, RPM: 2192, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:10:35] GPU5: 491.0 H/S [T: 64c, RPM: 2798, CC: 1230 MHz, MC: 1825 MHz]
[2018-04-28 13:10:35] GPU6: 491.0 H/S [T: 62c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
[2018-04-28 13:10:35] Total: 3532.0 H/S
[2018-04-28 13:12:36] GPU0: 510.0 H/S [T: 56c, RPM: 2187, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:12:36] GPU1: 510.0 H/S [T: 57c, RPM: 2198, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:12:36] GPU2: 509.0 H/S [T: 56c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
[2018-04-28 13:12:36] GPU3: 511.0 H/S [T: 57c, RPM: 2195, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:12:36] GPU4: 510.0 H/S [T: 57c, RPM: 2195, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:12:36] GPU5: 492.0 H/S [T: 64c, RPM: 2805, CC: 1230 MHz, MC: 1825 MHz]
[2018-04-28 13:12:36] GPU6: 498.0 H/S [T: 62c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
[2018-04-28 13:12:36] Total: 3540.0 H/S
[2018-04-28 13:14:38] GPU0: 510.0 H/S [T: 56c, RPM: 2192, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:14:38] GPU1: 510.0 H/S [T: 57c, RPM: 2196, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:14:38] GPU2: 509.0 H/S [T: 56c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
[2018-04-28 13:14:38] GPU3: 510.0 H/S [T: 57c, RPM: 2208, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:14:38] GPU4: 511.0 H/S [T: 57c, RPM: 2182, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:14:38] GPU5: 492.0 H/S [T: 64c, RPM: 2785, CC: 1230 MHz, MC: 1825 MHz]
[2018-04-28 13:14:38] GPU6: 483.0 H/S [T: 62c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
[2018-04-28 13:14:38] Total: 3525.0 H/S
[2018-04-28 13:16:40] GPU0: 510.0 H/S [T: 57c, RPM: 2185, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:16:40] GPU1: 510.0 H/S [T: 57c, RPM: 2188, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:16:40] GPU2: 509.0 H/S [T: 56c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
[2018-04-28 13:16:40] GPU3: 511.0 H/S [T: 57c, RPM: 2205, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:16:40] GPU4: 510.0 H/S [T: 57c, RPM: 2185, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:16:40] GPU5: 491.0 H/S [T: 64c, RPM: 2785, CC: 1230 MHz, MC: 1825 MHz]
[2018-04-28 13:16:40] GPU6: 495.0 H/S [T: 62c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
--------------
[2018-04-28 14:41:45] GPU0: 510.0 H/S [T: 56c, RPM: 2178, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 14:41:45] GPU1: 510.0 H/S [T: 57c, RPM: 2195, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 14:41:45] GPU2: 508.0 H/S [T: 56c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
[2018-04-28 14:41:45] GPU3: 511.0 H/S [T: 57c, RPM: 2195, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 14:41:45] GPU4: 510.0 H/S [T: 57c, RPM: 2192, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 14:41:45] GPU5: 492.0 H/S [T: 64c, RPM: 2798, CC: 1230 MHz, MC: 1825 MHz]
[2018-04-28 14:41:45] GPU6: 491.0 H/S [T: 62c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
[2018-04-28 14:41:45] Total: 3532.0 H/S
you need to read the first page too, there is always fresh info about version updates. Also it wasn't mining for me, it got stuck at pool change, so basically it wasn't doing anything. |
|
|
|
|
doktor83 (OP)
|
|
April 28, 2018, 11:52:31 AM |
|
Hello, is it possible to add an option to disable/enable windows gpus before start mining ?
Thanks
this is something i am already working on for the next version |
|
|
|
|
Pennywis3
|
|
April 28, 2018, 11:52:46 AM |
|
is this hynix mjr with 8gb? If yes mind to share your strap?
Yap, hynix MJR and the strap that Doktor83 posted. what's your intensity work size and thread ? max I can get is 995 h/s with your core clock and mem clock setting. I just realize that strap is different with strap from pimp my strap SRBPolaris. What Int are you using? the one i posted is on Int 104, but after testing Int 112 gives even more, about 1025-1030h/s. Still have to test things further, i have a feeling there is still room for improvement. |
|
|
|
|
ipe4enko
Newbie
Offline
Activity: 34
Merit: 0
|
|
April 28, 2018, 11:57:15 AM |
|
@Doctor wtf
After connect to deffee pool no any more connect to user pool!!! I mine for you more than one hour!!
Need version with disable devfee, i not greed bustard but...
Version 1.4.8
[2018-04-28 13:08:33] Total: 3527.0 H/S
[2018-04-28 13:09:11] Pool accepted result 0x00004F90
[2018-04-28 13:10:01] Pool accepted result 0x00006EBA
[2018-04-28 13:10:17] Pool difficulty: 94920
[2018-04-28 13:10:17] Pool sent a new job (ID: gyiozdozVZLAhV25eCHd+cE1oFiv)
[2018-04-28 13:10:22] Pool accepted result 0x000013D3
[2018-04-28 13:10:25] Connected to devfee pool
[2018-04-28 13:10:35] GPU0: 509.0 H/S [T: 56c, RPM: 2181, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:10:35] GPU1: 510.0 H/S [T: 57c, RPM: 2191, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:10:35] GPU2: 509.0 H/S [T: 56c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
[2018-04-28 13:10:35] GPU3: 511.0 H/S [T: 57c, RPM: 2192, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:10:35] GPU4: 511.0 H/S [T: 57c, RPM: 2192, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:10:35] GPU5: 491.0 H/S [T: 64c, RPM: 2798, CC: 1230 MHz, MC: 1825 MHz]
[2018-04-28 13:10:35] GPU6: 491.0 H/S [T: 62c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
[2018-04-28 13:10:35] Total: 3532.0 H/S
[2018-04-28 13:12:36] GPU0: 510.0 H/S [T: 56c, RPM: 2187, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:12:36] GPU1: 510.0 H/S [T: 57c, RPM: 2198, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:12:36] GPU2: 509.0 H/S [T: 56c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
[2018-04-28 13:12:36] GPU3: 511.0 H/S [T: 57c, RPM: 2195, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:12:36] GPU4: 510.0 H/S [T: 57c, RPM: 2195, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:12:36] GPU5: 492.0 H/S [T: 64c, RPM: 2805, CC: 1230 MHz, MC: 1825 MHz]
[2018-04-28 13:12:36] GPU6: 498.0 H/S [T: 62c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
[2018-04-28 13:12:36] Total: 3540.0 H/S
[2018-04-28 13:14:38] GPU0: 510.0 H/S [T: 56c, RPM: 2192, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:14:38] GPU1: 510.0 H/S [T: 57c, RPM: 2196, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:14:38] GPU2: 509.0 H/S [T: 56c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
[2018-04-28 13:14:38] GPU3: 510.0 H/S [T: 57c, RPM: 2208, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:14:38] GPU4: 511.0 H/S [T: 57c, RPM: 2182, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:14:38] GPU5: 492.0 H/S [T: 64c, RPM: 2785, CC: 1230 MHz, MC: 1825 MHz]
[2018-04-28 13:14:38] GPU6: 483.0 H/S [T: 62c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
[2018-04-28 13:14:38] Total: 3525.0 H/S
[2018-04-28 13:16:40] GPU0: 510.0 H/S [T: 57c, RPM: 2185, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:16:40] GPU1: 510.0 H/S [T: 57c, RPM: 2188, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:16:40] GPU2: 509.0 H/S [T: 56c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
[2018-04-28 13:16:40] GPU3: 511.0 H/S [T: 57c, RPM: 2205, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:16:40] GPU4: 510.0 H/S [T: 57c, RPM: 2185, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 13:16:40] GPU5: 491.0 H/S [T: 64c, RPM: 2785, CC: 1230 MHz, MC: 1825 MHz]
[2018-04-28 13:16:40] GPU6: 495.0 H/S [T: 62c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
--------------
[2018-04-28 14:41:45] GPU0: 510.0 H/S [T: 56c, RPM: 2178, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 14:41:45] GPU1: 510.0 H/S [T: 57c, RPM: 2195, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 14:41:45] GPU2: 508.0 H/S [T: 56c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
[2018-04-28 14:41:45] GPU3: 511.0 H/S [T: 57c, RPM: 2195, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 14:41:45] GPU4: 510.0 H/S [T: 57c, RPM: 2192, CC: 1230 MHz, MC: 1960 MHz]
[2018-04-28 14:41:45] GPU5: 492.0 H/S [T: 64c, RPM: 2798, CC: 1230 MHz, MC: 1825 MHz]
[2018-04-28 14:41:45] GPU6: 491.0 H/S [T: 62c, RPM: 0, CC: 1230 MHz, MC: 1920 MHz]
[2018-04-28 14:41:45] Total: 3532.0 H/S
you need to read the first page too, there is always fresh info about version updates. Also it wasn't mining for me, it got stuck at pool change, so basically it wasn't doing anything. In log file i see only this [2018-04-28 13:10:22] miner_result: Sending user result to pool [2018-04-28 13:10:22] json_send: {"method":"submit","params":{"id":"174cf176-de76-48d7-b5da-acd2ed4e3442","job_id":"gyiozdozVZLAhV25eCHd+cE1oFiv","nonce":"a79524c9","result":"31c0f025ec9ea375dd3b00a4b117d5b3a5f8061379a6f194267ae156d3130000"},"id":1} [2018-04-28 13:10:22] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}} [2018-04-28 13:10:22] miner_result: Pool accepted result 0x000013D3 [2018-04-28 13:10:25] switch_pool: Connected to devfee pool [2018-04-28 14:46:26] Stopping miner process |
|
|
|
|
bovineplane
Jr. Member
Offline
Activity: 153
Merit: 2
|
|
April 28, 2018, 12:09:12 PM |
|
Someone can help me?
I need config for vega 56... I have only 1820 h/s (1485 core/920 mem)
What algo are you mining and what are your current settings? Easier to start from where you are to see if anyone can help. v7 - XMR. Gigabyte Vega 56. 1) BlockChain Drivers: 900/920 -100mV: intensity 106-112, worksize 8, threads 2 - 1800-1860 h/s and on 2) Adrenalin 18.3.4: 1500/920 intensity 106-112, worksize 8, threads 2 - 1800-1860 h/s Errors appear on 920+ memory I am running a reference 56 with stock BIOS. 950 mem clock. My best setting is below. I posted it earlier in this thread for people to try. 110.5/16 worksize/2 thread. Should get ~1920 h/s. Maybe a bit less on your mem clock. Try it and post results. |
|
|
|
|
lebuawu2
Jr. Member
Offline
Activity: 176
Merit: 2
|
|
April 28, 2018, 12:14:45 PM |
|
is this hynix mjr with 8gb? If yes mind to share your strap?
Yap, hynix MJR and the strap that Doktor83 posted. what's your intensity work size and thread ? max I can get is 995 h/s with your core clock and mem clock setting. I just realize that strap is different with strap from pimp my strap SRBPolaris. Try intensity 104 worksize 8 threads 2 wow i never though intensity will be that high. thanks man. |
|
|
|
|
|
