Yesterday i mod my new card from type AMD Radeon RX 570 Pulse 4GB but the tool mean it is a unknow card.
i copy the 1500 strap and it works.

Did you need the org. bios to add the type in your program?

Best Regards
Willi

Hi Doctor, getting the "uknown bios message" Here is the link to bios. Would you mind updating the SRBPolaris?

https://mega.nz/#!dbJ1EYbQ!u-L3svsavwgZJ3FpyRG_CB2W7ujbk-J4BK1-XI-wPKg

Thanks very much!

I have a new MSI RX 560 Aero ITX 4GB that I received as an RMA from MSI. I seems different from all the others I have and will not honor the GPU or MEM clock settings. Strap changes work fine however. Below are some screen shots from SRB and the ROM. Are there some changes you could add to allow clock settings that will not be ignored?





https://mega.nz/#!oyp2laCL!6NqA8f_4kNYezDRUNz7DT7srfBXoZztAMVuLMwDeBgY

Any chance for a XZC (ZCoin) version?

can you add support to this bios?
https://mega.nz/#!ZeBUELSa!UdCccvmL97_Xhp1n7n8p1H_1Nqu8MsBD45snPHQt6wk

MSI RX 580 8G V1

Thank you very much!

firewall Comodo 10 reports about the hook installation 

Oh sorry.

https://mega.nz/#!0mw0QZxL!7Jlbi_FFeb646vFAZ5L5hE9EczNLQlNObPyWx0URjIk

Hi, please add this new type of ROM AMD HIS rx 580 4gb Elpida.
thanks

HI doktor83, I tried the new version but it seems its braking VRM voltage settings. There are 3 profiles and after seeting core voltage using offset, i found the setting also in second profile of VRM.

Example:
In SRBPolaris:
1) I changed 1750 strap, saved.
2) Opened again and set mem freq to 2125 and saved
3) opened and set GPU voltage to 65286 and saved.
... noticed, that VRM voltage was 1000mV at all profiles.

flashed and run. OverDriveNTool shows following default card settings now:
GPU: P1-P4, 800-1025, P5-P7 is 1125mV
VRM: P1 - 800mV, P2-1125, P3-950

The VRM voltage is totally different than spotted in SRBPolaris tool and P2 seems to be broken (set to core voltage).

doktor83 would you mind to take a look again if there is everything ok with SRBPolaris VRM voltage and bios I pasted few days ago please ?

Thanks...