Clumpco
Newbie
Offline
Activity: 16
Merit: 0
|
|
August 07, 2014, 08:53:16 AM |
|
Neil,
Is there any way that Minepeon could support mining both BTC and LTC at the same time? (like Multiminer). I suspect that I can manually start a second instance of bfgminer with the --scrypt option, but it would be cool to be able to manage it all at once via Minepeon.
Again congratulations for your excellent work!
|
|
|
|
ct1aic
|
|
August 07, 2014, 09:59:17 AM |
|
Just working on a new test image that should fix most of those issues... No donate as of yet but both the status and pools page are fully functional. The settings page is 90% complete and the plugins page loads (no test past that). It will be called MPRPI20140804.img.gz and will be available in the test area ( http://minepeon.com/img/testing/). Just as a warning, the server code is starting to make it's appearance in this release. The eventual outcome of this is that you will be able to go to https://mineforeman.io/ to manage your mining... at present all it does is erroneously tell you your mining rig is out of date though . Neil As usual, I don't know what to do with the image. As a nullity in Linux, I tried to use Win32DiskImager.exe with the .img of last version, but of course the RPI doesn't start... Not a full SD image...
|
Rui Costa, Portugal - BTC : 1ct1aicGoUVpZeovsw3cCcPJZJHV5JXtW
|
|
|
Clumpco
Newbie
Offline
Activity: 16
Merit: 0
|
|
August 07, 2014, 11:36:43 AM |
|
As usual, I don't know what to do with the image. As a nullity in Linux, I tried to use Win32DiskImager.exe with the .img of last version, but of course the RPI doesn't start... Not a full SD image...
Did you run SDFormatter on the card before writing the image with Win32DiskImager? Have you got the latest stable version of Win32DiskImager? I used version 0.9.5 and it worked fine for me. However the RPI did not start on the first try, so I unplugged it, removed/resinserted the SDcard and then it started just fine. Beware that your RPI might change its IP address when you change to a new version, it is best to give it a reserved address in your router so that it always uses the same IP.
|
|
|
|
ct1aic
|
|
August 07, 2014, 11:49:23 PM |
|
As usual, I don't know what to do with the image. As a nullity in Linux, I tried to use Win32DiskImager.exe with the .img of last version, but of course the RPI doesn't start... Not a full SD image...
Did you run SDFormatter on the card before writing the image with Win32DiskImager? Have you got the latest stable version of Win32DiskImager? I used version 0.9.5 and it worked fine for me. However the RPI did not start on the first try, so I unplugged it, removed/resinserted the SDcard and then it started just fine. Beware that your RPI might change its IP address when you change to a new version, it is best to give it a reserved address in your router so that it always uses the same IP. Thanks, Clumpco. Ok, with SDFormat and then Win32DiskImager, I could do it and I have now my RPI+ working with 15 BFL's and 3 USB BlueFury, using the 4 USB ports.
|
Rui Costa, Portugal - BTC : 1ct1aicGoUVpZeovsw3cCcPJZJHV5JXtW
|
|
|
MineForeman.com (OP)
Legendary
Offline
Activity: 896
Merit: 1000
|
|
August 08, 2014, 12:41:56 AM |
|
Neil,
Is there any way that Minepeon could support mining both BTC and LTC at the same time? (like Multiminer). I suspect that I can manually start a second instance of bfgminer with the --scrypt option, but it would be cool to be able to manage it all at once via Minepeon.
Again congratulations for your excellent work!
At the same time? eek! These low power devices are cool but there is just not enough CPU resources to host too many mining instances. Each mining instance can host nearly unlimited hashrate though, but that is if you keep it to only 1 mining instance. My solution would be to spend another $35 to upgrade your rig's cpu and memory (i.e. buy another one) and have that run your SCRYPT miners. No point putting all of your egg's in one basket and all. Neil
|
|
|
|
tr54
Newbie
Offline
Activity: 7
Merit: 0
|
|
August 08, 2014, 11:36:29 PM |
|
The August version works just fine on the PI B+. I keep getting conflicted reports about this... I have one now I just need the time to set it up with a miner. I meant, that it does what it was designed for, however this hash rate under devices really annoys my eyes.
|
|
|
|
tdcooper99
|
|
August 12, 2014, 12:24:52 PM |
|
I gave up trying to get my single Pi to run 2 different models of Zeusminers.... I bought a new B+ and ended up updating the firmware of MinePeon 0.2.4.6 using rpi-update, then cloning my B image. It runs perfectly on a B+!
|
|
|
|
starsoccer9
Legendary
Offline
Activity: 1630
Merit: 1000
|
|
August 12, 2014, 02:21:33 PM |
|
I personally gave up on getting it to work with my hashfast unit and gave up trying to get the beaglebone black version to work.
|
|
|
|
nwoolls
|
|
August 17, 2014, 02:34:46 AM |
|
Just as a warning, the server code is starting to make it's appearance in this release. The eventual outcome of this is that you will be able to go to https://mineforeman.io/ to manage your mining... at present all it does is erroneously tell you your mining rig is out of date though . Any reason you are going this route instead of improving your already existing MobileMiner support? There are many features MinePeon could be using (easily), but is not (such as switching pools, switching coins, etc). What I am doing is just an alternative to MobileMiner. Having said that, I would love to have MobileMiner support for pool switching etc but the author of the MobileMiner plugin does not support it (yet). I also still have a wired idea that one day MinePeon will become my full time job. At the moment, with the current feature set, the public have spoken and it seems I must do better ! (I will never make donations compulsory though) I'd be happy to give any and all assistance. I'm not a PHP developer but the MobileMiner API is super simple REST calls (documented at http://www.mobileminerapp.com/#api). If you or anyone else wants to pick up the PHP addon I'd be happy to assist. There's also some Python implementations available as well that have been updated recently. They may be an easier starting point? There's several scripts available at http://www.mobileminerapp.com/#minersAgain - always happy to help if there are any questions. Just give a shout.
|
MultiMiner: Any Miner, Any Where, on Any Device | Xgminer: Mine with popular miners on Mac OS X
|
|
|
MineForeman.com (OP)
Legendary
Offline
Activity: 896
Merit: 1000
|
|
August 17, 2014, 03:22:17 AM |
|
I'd be happy to give any and all assistance. I'm not a PHP developer but the MobileMiner API is super simple REST calls (documented at http://www.mobileminerapp.com/#api). If you or anyone else wants to pick up the PHP addon I'd be happy to assist. There's also some Python implementations available as well that have been updated recently. They may be an easier starting point? There's several scripts available at http://www.mobileminerapp.com/#minersAgain - always happy to help if there are any questions. Just give a shout. That would be cool, I am not there yet but I will diffidently be hitting you up for assistance. I should explain a bit better what I am hoping to achieve with the mineforeman.io api. It is not so much of a "Fully fledged cloud mining platform" but more of an api. It will do basic things like adding/removing pools and switching and stuff but what I am heading for is more something that people can use to control their devices programmatically. I was kind of hoping that it would enable OTHER people to develop the value added pay for stuff like mobile miner, I was just making it possible to work. Anyway, if anyone is interested, a new version was squeezed out a few days ago and you can download if for the Raspberry Pi or Beagle Bone Black from;- http://minepeon.com/img/testing/ It is 'almost there'. Authentication is working, donations are 100%, and it talks to the api quite nicely (go to https://mineforeman.io/ to have a sneak preview, basic graphing to come when I settle on a graphing library). API writes disabled and not implemented yet. As always, donations and the api can be turned off on the settings page but if people can at least leave the api on it will really help with development/testing. Neil
|
|
|
|
tr54
Newbie
Offline
Activity: 7
Merit: 0
|
|
August 18, 2014, 11:52:58 AM |
|
So, version "MPBBB20140815-B-0.3.0-PR2.img.zip" doesn't boot up on my PI. However "MPRPI20140815-R-0.3.0-PR2.img.zip" works superb. Only hash rate column shows 30% for my AMU devices, all BFL is 100% correct. If I check average speed on pool's website in 1h intervals, whole my set up works on 100%. I left donation tuned on and will check tomorrow if it worked and switched back to my workers. Thank you MineForeman.com
|
|
|
|
Clumpco
Newbie
Offline
Activity: 16
Merit: 0
|
|
August 18, 2014, 03:20:19 PM Last edit: August 18, 2014, 04:07:36 PM by Clumpco |
|
<snip> Anyway, if anyone is interested, a new version was squeezed out a few days ago and you can download if for the Raspberry Pi or Beagle Bone Black from;- http://minepeon.com/img/testing/ It is 'almost there'. Authentication is working, donations are 100%, and it talks to the api quite nicely (go to https://mineforeman.io/ to have a sneak preview, basic graphing to come when I settle on a graphing library). API writes disabled and not implemented yet. As always, donations and the api can be turned off on the settings page but if people can at least leave the api on it will really help with development/testing. Neil Now testing MPRPI20140815-R-0.3.0-PR2 - api looks to be working fine and I will leave it turned on. Weekly, Monthly and Yearly hashrates just show the png file name, maybe they need to have at least one data point before they show? Donations turned on, how can I tell if they are working? Great work dude! [ETA] After about half an hour I got a point on the weekly chart and the others appeared! Question answered...
|
|
|
|
MineForeman.com (OP)
Legendary
Offline
Activity: 896
Merit: 1000
|
|
August 18, 2014, 09:57:32 PM |
|
So, version "MPBBB20140815-B-0.3.0-PR2.img.zip" doesn't boot up on my PI. However "MPRPI20140815-R-0.3.0-PR2.img.zip" works superb. Only hash rate column shows 30% for my AMU devices, all BFL is 100% correct. If I check average speed on pool's website in 1h intervals, whole my set up works on 100%. I left donation tuned on and will check tomorrow if it worked and switched back to my workers. Thank you MineForeman.com No one ever reads instructions (I certainly don't)... on the bottom of the download page!!!;- MPBBB = BeagleBone Black MPRPI = Raspberry Pi I just had a brain flash though and move them into separate directories . I hope that helps. Neil
|
|
|
|
MineForeman.com (OP)
Legendary
Offline
Activity: 896
Merit: 1000
|
|
August 18, 2014, 10:08:18 PM |
|
Now testing MPRPI20140815-R-0.3.0-PR2 - api looks to be working fine and I will leave it turned on. Thanks for that, keep an eye on https://mineforeman.io/ and you will start to see information populate (as well as graphs) as I add it. The security is rather brutal though it will only allow you see anything if you are in the same location as your miner. 2 factor authentication will be required if you want to see anything while not in the same physical location but it is not implemented yet. Neil
|
|
|
|
Clumpco
Newbie
Offline
Activity: 16
Merit: 0
|
|
August 19, 2014, 05:36:57 AM |
|
The security is rather brutal though it will only allow you see anything if you are in the same location as your miner. 2 factor authentication will be required if you want to see anything while not in the same physical location but it is not implemented yet.
Neil
Brutal security is far better than weak security! Still don't know if the donation works, (currently set for 13 minutes at 18:00 CEST).
|
|
|
|
MineForeman.com (OP)
Legendary
Offline
Activity: 896
Merit: 1000
|
|
August 19, 2014, 10:56:52 PM |
|
Brutal security is far better than weak security! True, very much defeats the purpose of "Remote Access" if you have to be sitting beside the device though . Still don't know if the donation works, (currently set for 13 minutes at 18:00 CEST).
Working 100%, if you want to test it add add this pool;- Address = stratum+tcp://stratum.btcguild.com:3333 User = MinePeon_Donate Pass = MinePeon_Donate Within a minute the MinePeon will realize it should not be there and delete it! Charting is proving to be a problem, I have highstock working and it looks great but the developer license is $780.00 USD. Still, from what I am reading it will allow anyone who used the MineForeman.IO code to use it, no matter what server they are running it on. I will think about it as I do some other stuff. Neil
|
|
|
|
Clumpco
Newbie
Offline
Activity: 16
Merit: 0
|
|
August 20, 2014, 07:17:45 AM |
|
Still don't know if the donation works, (currently set for 13 minutes at 18:00 CEST).
Working 100%, if you want to test it add add this pool;- Address = stratum+tcp://stratum.btcguild.com:3333 User = MinePeon_Donate Pass = MinePeon_Donate Within a minute the MinePeon will realize it should not be there and delete it! Yes, it was deleted so apparently it works. Charting is proving to be a problem, I have highstock working and it looks great but the developer license is $780.00 USD. Still, from what I am reading it will allow anyone who used the MineForeman.IO code to use it, no matter what server they are running it on.
I will think about it as I do some other stuff.
Neil
As far as the graphs are concerned I was going to suggest the Google Charts Api since the simpler Google Chart Tools look like they are going to be retired in 2015. If I were you I would contact Highstock and ask about the Hichchart license, it appears to be only $80 for a single web page that is not considered as a "web application".
|
|
|
|
tdcooper99
|
|
August 20, 2014, 10:26:28 AM |
|
I'm struggling to solo mine pointing my MinePeons to my remote wallet... won't go into it, but I've tried a lot of things without success. I'd like my next attempt be to actually compile a wallet on MinePeon and try soloing from the same machine instead of remotely.... anyone done this? Anyone know the dependencies for a standard coinname-qt build?
|
|
|
|
MineForeman.com (OP)
Legendary
Offline
Activity: 896
Merit: 1000
|
|
August 20, 2014, 10:02:24 PM |
|
As far as the graphs are concerned I was going to suggest the Google Charts Api since the simpler Google Chart Tools look like they are going to be retired in 2015. They are surprisingly kludge to work with as well, for an application like this I have two requirements;- * Good support for a timestamp series. * Dynamic amount of series. Timestamping is not too bad, you do have to do a bit of working around it bit it does the job but in order to add a series you need to redo the javascript part. Not ideal, with highcharts if you point it at data with multiple series (mining devices in this case) it just displays multiple lines. If I were you I would contact Highstock and ask about the Hichchart license, it appears to be only $80 for a single web page that is not considered as a "web application". To get all the features I would want to use I would need the Highstock license and not the Highchart one. And because it displays "customer data" it would be the expensive license. Neil
|
|
|
|
ct1aic
|
|
August 21, 2014, 08:17:26 PM Last edit: August 21, 2014, 08:37:07 PM by ct1aic |
|
With last version of 0.3.0, the old date problem is there again. After 1 minute, the RPI still doesn't have the correct date. # date Thu Jan 1 00:01:14 UTC 1970 # date Thu Aug 21 20:02:22 UTC 2014 #
Also, if we select the default bfgminer option and save, bfgminer will never start again, as it isn't at the location of the command: #!/bin/bash sleep 10 /usr/bin/screen -dmS miner /opt/minepeon/bin/bfgminer -S all -c /opt/minepeon/etc/miner.conf Can someone please post here the Miner Startup Settings that comes with the image? I can't find where bfgminer is... UPDATE: Forget... I reinstalled the image in the SD. The new location is... /usr/bin/bfgminer
|
Rui Costa, Portugal - BTC : 1ct1aicGoUVpZeovsw3cCcPJZJHV5JXtW
|
|
|
|