Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[quick1unc]

i've tried everything i can think of at this point minus, redoing windows. Doesn't make sense though considering I've been running it all day with each card for testing and after swapping out for the 4th card, the issue just appeared on the next boot up. nothing changed except the next 2 cards that I tried. running 16.9.1, and z170a gaming pro carbon. Same setup as the other machine I just built.

[AzzAz]

Hello my Claymore's v9.3 stop working after 3 days just turn off and when i try turn on it get frozen at Opencl intializing then windows show "program stop working" i have card msi rx 570 armor oc. what to do?
Thanks for help.

Reinstall the driver.

Reinstalling the drivers does not help, only restoring the system to a setting (after installation) allows you to start mining. But then again, after turning off Claymore again does not want to run. I am working on windows 10.

I REALLY NEED HELP

Can you try reducing the clock frequency? Or wait a bit longer after the Windows start and then start the mining.

is one thing more what i see when it work Claymore show my card have 4gb and when dont want work the Claymore show the card have 3gb and ged frozen

And it happend not only when i turn off windows is always when i turn off Claymore, in last night i had no power for 5 minutes, computer start alone but the program not, and later after 6h i try turn on it and it still dont wanted work. i dont know what to do

Help i want to run it before night

hey just set your clock and mclock values to normal. To default values. This must help and dont overclock much again.

i never OC it, i had the sam problem on windows 7 and 10

How much RAM you have?

mobo asus m2n68-am se2
CPU AMD ATHLON 64 X2 3800+
RAM ddr2 2gb
Used parts that I already had at home, can this be the reason? If so I will invest a little more or I will transfer the card to my PC

[quick1unc]

So i re-installed windows, installed fresh claymore and its still doing the same thing. As soon as the program starts to GPU buffer or starts to hash the screen goes blank blue or black and locks up. There are no errors showing up in the miner log. I'm installing minergate now to see if it does the same thing with that. Anyone have any ideas?

[funnyboy027]

Hi Claymore,
I can't use USB wireless adapter tp-link 722n with Claymore v9.3. Every time mining starts, the internet connection immediately stops.
How to fix this problem, thank you.

[quick1unc]

Hi Claymore,
I can't use USB wireless adapter tp-link 722n with Claymore v9.3. Every time mining starts, the internet connection immediately stops.
How to fix this problem, thank you.

I had that issue as well until i changed to 2.4ghz instead of 5ghz network. For some reason it seemed like the power draw was knocking the 5ghz out, but has been fine every since on 2.4.

[wizcap]

I get this error those three days

ETH: Stratum - Cannot connect to eth-eu.dwarfpool.com:8008
DevFee: ETH: Stratum - Failed to connect, retry in 20 sec...

and need to restart miner frequently

Any idea?
 

[funnyboy027]

Hi Claymore,
I can't use USB wireless adapter tp-link 722n with Claymore v9.3. Every time mining starts, the internet connection immediately stops.
How to fix this problem, thank you.

I had that issue as well until i changed to 2.4ghz instead of 5ghz network. For some reason it seemed like the power draw was knocking the 5ghz out, but has been fine every since on 2.4.

That's strange because my wifi dongle only support 2.4ghz IEEE 802.11/b/g/n and I connect it to my 2.4ghz router

[frostminer]

So i re-installed windows, installed fresh claymore and its still doing the same thing. As soon as the program starts to GPU buffer or starts to hash the screen goes blank blue or black and locks up. There are no errors showing up in the miner log. I'm installing minergate now to see if it does the same thing with that. Anyone have any ideas?

You probably have too weak psu or something.

Try running it with -ethi 1 in eth-mode.

[quick1unc]

Its definitely not a weak power supply. I've tried it on the solo 550w evga as well as the additional 1200w hp server psu for the single card and the result is the same. I re-installed windows again and updated to 17.4.1 drivers with  the patch and as soon as any gpu mining program starts and it starts hashing it crashes with no indication of what the issue is other than the occasional report that the driver has failed. At this point I don't know how to fix it since i've updated everything multiple times now. i'm gonna try running a synthetic gpu benchmark to see if it still crashes.

[Jamievs]

Its definitely not a weak power supply. I've tried it on the solo 550w evga as well as the additional 1200w hp server psu for the single card and the result is the same. I re-installed windows again and updated to 17.4.1 drivers with  the patch and as soon as any gpu mining program starts and it starts hashing it crashes with no indication of what the issue is other than the occasional report that the driver has failed. At this point I don't know how to fix it since i've updated everything multiple times now. i'm gonna try running a synthetic gpu benchmark to see if it still crashes.

You can try smOS and see if it still happens. If it still happens it will most likely be a hardware issue

[quick1unc]

whats that?

[Jamievs]

whats that?

https://bitcointalk.org/index.php?topic=1541084.0

[MinerosYV]

Stupid question here, got a few Dell Vostro 260 at work, 1155 socket, 4 PCIE, i3 Processor, 4 GB memory, for some reason there is no way they will even boot if I install a R9 380 on the mobo, not even blink.
Strangely enouhg we have some Dell Vostro 230, 775 socket, Dual Core, the work like a champ, any idea of what could be going on?

Any help would be appreciated, thanks

[frostminer]

Its definitely not a weak power supply. I've tried it on the solo 550w evga as well as the additional 1200w hp server psu for the single card and the result is the same. I re-installed windows again and updated to 17.4.1 drivers with  the patch and as soon as any gpu mining program starts and it starts hashing it crashes with no indication of what the issue is other than the occasional report that the driver has failed. At this point I don't know how to fix it since i've updated everything multiple times now. i'm gonna try running a synthetic gpu benchmark to see if it still crashes.

No difference with -ethi 1  ?

[quick1unc]

I didn't try that, but i tried 2 different miners and heaven benchmark and it still crashes. I am trying to do the simple mining program but I can't get it to recognize the usb image to boot from.

[Swimmer63]

Trying dual mode for the first time on one of my rigs.  Mining eth and pascal.  All seems to work but my eth speed dropped from 99Mh to 71Mh
I'm pretty sure that's not suppose to happen.  Mining with 4x RX 480's 8GB
Any thoughts as to why?  Not worth losing 30% of eth speed.

Here is my start.bat per Nanopool instructions.

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-us-west1.nanopool.org:9999 -ewal ETHWALLET.ADDRESS/Miner1/EMAIL -epsw x -dpool stratum+tcp://pasc-us-west1.nanopool.org:15555 -dwal PASCAL.WALLET.Miner1/EMAIL -dpsw x -dcoin pasc -etht 1000 -dcrt 1000 -ftime 10

[coinzoid]

Can someone share a valid bat file for mining EXP and DCR together? I've tried following format but it says disconnected for EXP.

start/high EthDcrMiner64.exe -epool exp-eu.dwarfpool.com:81 -ewal 0xc3434ddddsserer8ff916d61519539e9ed -eworker HomePC -epsw x -esm 3 -allpools 1 -allcoins exp -dpool stratum+tcp://dcr-eu.coinmine.pl:2222 -dwal bbcd.HomePC -dpsw BdQecswq4XK3fY -dcri 25 -mode 0 -asm 1 -wd 1 -tt 80 -ttdcr 76 -ttli 78 -tstop 85

[Gagana]

Sometime EthMan stops work properly - show all rigs offline and if i try close there are error message "Cannot terminate an externally created thread". Need kill and restart process via ProcessExplorer.

How many rigs in EthMan do you have?
Currently I'm rewriting some parts of EthMan, network routines too, probably it will help.

Confirm this bug from time to time. There were 25-50 nodes in the list.

[Gaglam]

Got a lil prob here.

GPU3 goes down after a while

ETH: 05/14/17-14:13:02 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 135.278 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00

ETH: GPU0 26.980 Mh/s, GPU1 27.059 Mh/s, GPU2 27.128 Mh/s, GPU3 27.021 Mh/s

ETH: GPU0 27.022 Mh/s, GPU1 27.099 Mh/s, GPU2 27.078 Mh/s, GPU3 20.505 Mh/s
ETH: GPU0 26.976 Mh/s, GPU1 27.099 Mh/s, GPU2 27.105 Mh/s, GPU3 15.076 Mh/s

down to 8 Mh/s...

Virtual Memory is set to 32GB... still no solution, anybody had the same prob?

[Cereberus]

Stupid question here, got a few Dell Vostro 260 at work, 1155 socket, 4 PCIE, i3 Processor, 4 GB memory, for some reason there is no way they will even boot if I install a R9 380 on the mobo, not even blink.
Strangely enouhg we have some Dell Vostro 230, 775 socket, Dual Core, the work like a champ, any idea of what could be going on?

Any help would be appreciated, thanks

Stupid enough question. How can you pretend to run a R9 380 which consumes 200-250 watt power from a dell vostro 260 psu which usually is 240-300 watt ? You risk to burn it down.