Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[mewhoyou]

Guys,

I have all ways been using single miner and read somewhere that dual mining would not affect the ETH mining. I have been trying but it does. Is there any specific command? I have tried -ASM 2 but it still the same when I mine ETH and SC. ETH still goes down when i dual mine.

[cashen]

Is this normal?

Effective Hash Rate / Reported is right at 95%

[sp00lin9]

Is this normal?

Effective Hash Rate / Reported is right at 95%

My effective hashrate can get erratic like that too sometimes..

[alucard20724]

Hi guys, girls and Claymore.

I was wondering if Claymore will release a version that allow to mine with 9 gpu. MOBOs are heading to the point where mining with 9 gpus is possible. Any information related to this point?

Thank you.

It's the operating system and motherboard that needs to support more gpu,  not the application.

[manotroll]

How do I know if the devfell is being mined in the poll I'm using?
miningpoolhub.com

[TechPark]

-epool eu1.ethermine.org:4444
-ewal 0xeb2B1dEefb10DfB8093725Ce383cD7aa517c73a9
-epsw x
-esm 0
-mode 0
-tt 80,80,80,80
-asm 0

all gpu works in single, more gpus the other says Cannot create dag

Try this key with value 1.

-eres   this setting is related to Ethereum mining stability. Every next Ethereum epoch requires a bit more GPU memory, miner can crash during reallocating GPU buffer for new DAG.
   To avoid it, miner reserves a bit larger GPU buffer at startup, so it can process several epochs without buffer reallocation.
   This setting defines how many epochs miner must foresee when it reserves GPU buffer, i.e. how many epochs will be processed without buffer reallocation. Default value is 2.

[TechPark]

Guys, I am really really often facing this hangs and miner stuck on my cards. -gser 2 did not solve this issue. Any ideas?

29,4 Mh/s - is the first idea.
Read the first page of this thread thoroughly - is the second idea.

[TechPark]

The lastest version is 9.4? but everyone uses 9.2?

why?

What is your source? I am using 9.4

[TechPark]

Is this normal?

Effective Hash Rate / Reported is right at 95%

I would say that 95% is a good result. I am getting 90%. Impressive hash rates from 4 workes. Is it 31 Mhs from 1 card? What make and model and settings on them?

[doktor83]

Can the default job timeout detecion be changed from 15 minutes to less?

[bitcoinmining123456]

I have 3 Sapphire RX 470 4gb and 2 sapphire 570 4gb in one rig but display adapter showing {This device cannot find enough free resources that it can use. (Code 12)If you want to use this device, you will need to disable one of the other devices on this system.} only 2 GPUs other 3 GPUs are not showing. I use z170a xpower gaming titanium motherboard, windows 10 64 bit, latest version AMD drivers 17.5.2 and I updated bios.

now, what do I now? anyone help me please to solve my problem. Thanks in advance

Can anyone fix my problems? please

[notbatman]

Hey claymore, moving smaller chunks around is quicker and results in faster hashing right? What if you compress the DAG?

[jeremyf327]

Why do I only get 22 mh/s with each of my RX 580's 8gb? I figured these guys would get at least 26+. What am I doing wrong? Here is my batch file...

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool us2.ethermine.org14444 -ewal 0x0c62Ff143f51f4320F9408ED86f0B01128EE764A.rig3 -epsw x -dpool stratum+tcpsiamining.com7777  -dwal 3896d72f4860695c165692a06cd46f035d438d034d2c9b32e3bdf879a5174d55ec40bc51d80f.ri g3 -dpsw x -dcoin sia

[Andrey123]

Guys help please !!!
I launched the mining on the two while the cards.
Created a config file with these parameters:

-epool eu1-etc.ethermine.org:4444
-ewal 0xAD61Cc52a630f6D8697f795163a4DB342543C059
-epsw x
-dpool dcr.coinmine.pl:2222
-dwal name when registering the name of the clerk
-dpsw password of a clerk
-esm 2
-mode 0
-tt 70
-asm 2
-etha 0.0
-ethi 11.11

I ran the ethdcrminer64 file and produced this screen.
http://savepic.ru/14211059.png

What for FAILOVER 1 ?? Why are there other pools shown?
The cards in the dual are buzzing, everything is cut off for now (

Maybe because when you run ethdcrminer64, the default miner refers to something?
Then he launched a batch file for the Classic air, on Nanopoula.
http://savepic.ru/14201843.jpg

The temperature of the Power Supply program showed this:
http://savepic.ru/14192627.jpg

Hash on the first map (to which the monik is connected), fell a couple of times to 10, then equalized. And she was hot somehow.
Later he left for a couple of minutes, returned, but the monik does not burn, the first card does not spin, the second one threshes.
Monique turned off, then turned on, wrote there is no video adapter. It rebooted, did not help, poked the adapters from VGA to HDMI, again it was loaded, the card spun, the system got stuck.

But the batch file from the Claymore folder disappeared, did not find it and was upset (
Firewood version 16.9.1, auto-update disabled, Windows 7 64 bit.

Maps Sapphire RX480 8 GB, memory Mikron, while nothing sewed, did not disperse anything.
The food is served until 2 cards, two cards are in the rig, but the power wires are not connected yet.
Raisers on the mallekus feed, on two cards one wire.

Power Supply Corsair PM1000i, it does not rotate by the way.

What now?
Who can help properly configure these batars? There is a suspicion that in the batnik the speed of the fans is incorrectly specified and they are heated and rotate a little, and the dual is generally hard (probably wrong did something (

The first farm already does not work stably (

[chohav]

Is this normal?

Effective Hash Rate / Reported is right at 95%

My effective hashrate can get erratic like that too sometimes..

Same with me, around 5-6% lower 24h average than reported. Any ideas?

[TechPark]

Guys help please !!!
I launched the mining on the two while the cards.
Created a config file with these parameters:

-epool eu1-etc.ethermine.org:4444
-ewal 0xAD61Cc52a630f6D8697f795163a4DB342543C059
-epsw x
-dpool dcr.coinmine.pl:2222
-dwal name when registering the name of the clerk
-dpsw password of a clerk
-esm 2
-mode 0
-tt 70
-asm 2
-etha 0.0
-ethi 11.11

I ran the ethdcrminer64 file and produced this screen.
http://savepic.ru/14211059.png

What for FAILOVER 1 ?? Why are there other pools shown?
The cards in the dual are buzzing, everything is cut off for now (

Maybe because when you run ethdcrminer64, the default miner refers to something?
Then he launched a batch file for the Classic air, on Nanopoula.
http://savepic.ru/14201843.jpg

The temperature of the Power Supply program showed this:
http://savepic.ru/14192627.jpg

Hash on the first map (to which the monik is connected), fell a couple of times to 10, then equalized. And she was hot somehow.
Later he left for a couple of minutes, returned, but the monik does not burn, the first card does not spin, the second one threshes.
Monique turned off, then turned on, wrote there is no video adapter. It rebooted, did not help, poked the adapters from VGA to HDMI, again it was loaded, the card spun, the system got stuck.

But the batch file from the Claymore folder disappeared, did not find it and was upset (
Firewood version 16.9.1, auto-update disabled, Windows 7 64 bit.

Maps Sapphire RX480 8 GB, memory Mikron, while nothing sewed, did not disperse anything.
The food is served until 2 cards, two cards are in the rig, but the power wires are not connected yet.
Raisers on the mallekus feed, on two cards one wire.

Power Supply Corsair PM1000i, it does not rotate by the way.

What now?
Who can help properly configure these batars? There is a suspicion that in the batnik the speed of the fans is incorrectly specified and they are heated and rotate a little, and the dual is generally hard (probably wrong did something (

The first farm already does not work stably (

RUS: Aндpeй, пepeвoд пoлyчилcя нe oчeнь, тeбe вpядли тyт oтвeтят. Ha этoм фopyмe ecть pyccкaя вeткe, нaпиши тyдa пo pyccки. B кpaинeм cлyчae, нaпиши мнe КOPOTКO пo pyccки в личкy, я пepeвeдy нa aнглийcкий. Укaжи пoдpoбнo кoнфигypaцию и пapaмeтpы.

ENG: Hi, Andrej. I believe that auto-translate did not do a great job here. I doubt that anyone will answer. Send me a private message on Russian and i will translate it into English. Describe your configuration in details.

[Gaglam]

anyone got some 1070's hashrates for me?

[XManiac]

anyone got some 1070's hashrates for me?

Asus Strix 1070 ~30mh/s

[cavoisathu]

Hello guys, have a nice day !

Can I disable the statist of the Dcr mining?? (Dual mining is must working, hide the yellow line in Claymore cmd window)
Thanks !

[vince212]

anyone got some 1070's hashrates for me?

Asus Strix 1070 ~30mh/s

Is that in dual mining? I only get 25mh/s galax 1070 exoc