Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[dragonmike]

How much more heat is being generated by dual-mining sia? I'm a bit concerned about that aspect now that summer is coming...

Anyone dual mining eth + Siacoin on RX 570 cards?

My asus model only gets about 22MH on eth and 660MH on sia. Card is modded and OC'ed. Any help would be appreciated

Ditto.

EDIT: Actually, playing with the -dcri does indeed help you the right balance.
It does however hit your hardware quite hard and both my miners crashed a few minutes in, so reverting to ETH-only for now.

[Era_666]

Is there a port I have to set for the Miner? My W-lan hase no connection to the internet when miner is running. Any other ideas what the problem could be?

[Errandil]

Hi All,

I'm new here. I have a problem with configuration by dual mining: ETC + PASC. I'm mining just ETC, can someone take a look and find what is wrong here? Eventually what is better for dual mining?


start WattTool-0.92.exe 0.ini 6.ini 12.ini 18.ini 24.ini

timeout /t 10
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe  -epool etc-eu1.nanopool.org:19999 -ewal 0x5596703cfc89215f2a211d9d55bb1c0be803a48d
.AL -epsw x -dpool stratum+tcp://pasc-eu1.nanopool.org:15555 -dwal 86646-64.563040a3da5d1068.AL -dbg 1 -tt 70 -dcri 20 -allpools 1 -mode 0 -mport 0 -ethi 8 -dcoin pasc -gser 1 -allcoins -1 -etha 1 -r 1

[qqqq]

Can anyone confirm that 9.3 finds a blocks in SOLO ? 650 MH\s and 11 days still no block. Bad luck ?

[arbenowskee]

I've configured miner to dual mine ETH + SIA, both on pool. How do I configure so I mine ETH on pool, but SIA SOLO?

[Gunntha]

Im curious as to why the DCR authentication fails. Is it buried somewhere here in these 500+ pages?

Same problem here. Using windows7/64bit with claymore 9.3 on decredpool.org

[Eleventy5]

Im curious as to why the DCR authentication fails. Is it buried somewhere here in these 500+ pages?

Same problem here. Using windows7/64bit with claymore 9.3 on decredpool.org

Have you created your worker??

[jeremyf327]

Looks like its time to mine siacoin instead of decred.  Anyone made the switch or currently mine SC and have a recommendation on which pool is the best to use?

Yes, Sia is very profitable right now. Jump on over to Sia guys. I use https://siamining.com

[xanx]

Hi all, I had a power failure today and claymores miner was saying one of my gpus had failed when my rig restarted. I restarted again and I get 0mhz on the gpu that had failed. The card is detected in device manager but does not seem to be working. Any ideas what I should do?

[vapourminer]

Hi all, I had a power failure today and claymores miner was saying one of my gpus had failed when my rig restarted. I restarted again and I get 0mhz on the gpu that had failed. The card is detected in device manager but does not seem to be working. Any ideas what I should do?

pull and reseat the card. reseat the power plugs. change the riser if its on one.

unfortunately power outages can be brutal on electronics, especially when it comes back on as its unstable as thousands of appliances come on at the same time.. its possible you card is dead.

[xanx]

Hi all, I had a power failure today and claymores miner was saying one of my gpus had failed when my rig restarted. I restarted again and I get 0mhz on the gpu that had failed. The card is detected in device manager but does not seem to be working. Any ideas what I should do?

pull and reseat the card. reseat the power plugs. change the riser if its on one.

unfortunately power outages can be brutal on electronics, especially when it comes back on as its unstable as thousands of appliances come on at the same time.. its possible you card is dead.

this worked after a few tries! Thanks, card was not damaged but should probably invest in a high end surge protector in the near future.

[djazher]

Hey !

Anyone having this error ?

GPU 1, GpuMiner cu_k02 failed 73 an illegal instruction was encountered
GPU 1, GpuMiner kx failed 1
GPU 1 failed
GPU 0, GpuMiner cu_k02 failed 73 an illegal instruction was encountered
GPU 0, GpuMiner kx failed 1
GPU 0 failed
GPU 1, GpuMiner cu_k02 failed 73 an illegal instruction was encountered
GPU 1, GpuMiner kx failed 1
GPU 1 failed
GPU 0, GpuMiner cu_k02 failed 73 an illegal instruction was encountered
GPU 0, GpuMiner kx failed 1
GPU 0 failed

I'm running tests on a brand new EVGA GTX 1070 SC, alongside an ASUS GTX 970 Strix Both are OC's, but I get this message even running on normal setup. Driver is 382.05, OS is W7. I was mining with 2 x GTX 970, and never had this issue before.

[edit] Tried the 9.2 version, and 372.54 driver as well, same error message popping up.

[edit 2] OK, sounds like a performance problem. I reseted the whole OC settings, and it seems to be running nicely since then.

[vapourminer]

Hi all, I had a power failure today and claymores miner was saying one of my gpus had failed when my rig restarted. I restarted again and I get 0mhz on the gpu that had failed. The card is detected in device manager but does not seem to be working. Any ideas what I should do?

pull and reseat the card. reseat the power plugs. change the riser if its on one.

unfortunately power outages can be brutal on electronics, especially when it comes back on as its unstable as thousands of appliances come on at the same time.. its possible you card is dead.

this worked after a few tries! Thanks, card was not damaged but should probably invest in a high end surge protector in the near future.

yeah surge suppressors are more or less a must have, but only use quality ones. cheap ones have been known to catch fire.

if you can swing it get a whole house unit that mounts at the breaker panel.

[xanx]

Hi all, I had a power failure today and claymores miner was saying one of my gpus had failed when my rig restarted. I restarted again and I get 0mhz on the gpu that had failed. The card is detected in device manager but does not seem to be working. Any ideas what I should do?

pull and reseat the card. reseat the power plugs. change the riser if its on one.

unfortunately power outages can be brutal on electronics, especially when it comes back on as its unstable as thousands of appliances come on at the same time.. its possible you card is dead.

this worked after a few tries! Thanks, card was not damaged but should probably invest in a high end surge protector in the near future.

yeah surge suppressors are more or less a must have, but only use quality ones. cheap ones have been known to catch fire.

if you can swing it get a whole house unit that mounts at the breaker panel.

what is that exactly?

Also the problem seems to have come back even though the GPU was hashing, now its hanging again after re-doing what you just told me to do :/

[vapourminer]

Hi all, I had a power failure today and claymores miner was saying one of my gpus had failed when my rig restarted. I restarted again and I get 0mhz on the gpu that had failed. The card is detected in device manager but does not seem to be working. Any ideas what I should do?

pull and reseat the card. reseat the power plugs. change the riser if its on one.

unfortunately power outages can be brutal on electronics, especially when it comes back on as its unstable as thousands of appliances come on at the same time.. its possible you card is dead.

this worked after a few tries! Thanks, card was not damaged but should probably invest in a high end surge protector in the near future.

yeah surge suppressors are more or less a must have, but only use quality ones. cheap ones have been known to catch fire.

if you can swing it get a whole house unit that mounts at the breaker panel.

what is that exactly?

Also the problem seems to have come back even though the GPU was hashing, now its hanging again after re-doing what you just told me to do :/

 i have one of these Square Ds (slightly different mine is a more powerful model but this was first link that was closest to what i have.):
http://www.homedepot.com/p/Square-D-Surge-Breaker-Plus-Whole-House-Surge-Protector-SDSB80111/205905090

as for the gpu being intermittent it may be a power plug was damaged by the surge. inspect the plugs for discoloration or pitting maybe. maybe change slots if you can.

if your psu is modular reseat all those connectors on the psu side too.

[thaelin]

   Running now solid with 3 gtx 1060's so time to build the racks up.  Risers seem to be all over the place on price but really come down to will they work. I am seeing a pack of 10 on NewEgg for $129 that look real good. Can I get some input on which one to use for longevity as opposed to price?

   And on the other note, see many going after Saicoin too. Do I use the wallet addy for it too? Using MyEtherWallet so not sure if they will accept payout of that coin.

Many thanks for all the great info here.   Thay

[crypsy]

Hi . i have this very strange problem.  miner freeze when i click on it, but not hole pc, just miner . Click on "X" will close it and will start  normal with no need restarting the rig.
Anyone else with the same problem, or it's just me ?


6x Sapphire RX 580 Pulse 4GB Hynix -stock
mb h81
1200w psu

[jackbox]

Hi . i have this very strange problem.  miner freeze when i click on it, but not hole pc, just miner . Click on "X" will close it and will start  normal with no need restarting the rig.
Anyone else with the same problem, or it's just me ?


6x Sapphire RX 580 Pulse 4GB Hynix -stock
mb h81
1200w psu

Windows stops command window execution if you click on it. Click on title bar, not inside the window.

[crypsy]

Hi . i have this very strange problem.  miner freeze when i click on it, but not hole pc, just miner . Click on "X" will close it and will start  normal with no need restarting the rig.
Anyone else with the same problem, or it's just me ?


6x Sapphire RX 580 Pulse 4GB Hynix -stock
mb h81
1200w psu

Windows stops command window execution if you click on it. Click on title bar, not inside the window.

Thanks for the reply . i have this issue only on windows 10 64bit. windows 7 with r9 3xx and window 8 with rx4xx does not have this problem .

[giagge]

Anyone pls give me a .bat for mining only siacoin on https://sia.nanopool.org/ with Nvidia 1070 ?

Thanks .