Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[ccminer.net]

Is it possible to mine ZCLASSIC with this miner?

[avirdoz]

How many rigs in EthMan do you have?
Currently I'm rewriting some parts of EthMan, network routines too, probably it will help.

Ten rigs.
Btw can any one share h/r on nvidia 1070/1080 in dual mode?

[delle54]

Is it possible to mine ZCLASSIC with this miner?

No. See Claymore's ZCash AMD GPU Miner v12.4 (Windows/Linux).

[Claymore]

Hi Claymore,
I have this error just before miner restarts. Sometimes after 50+ hours, sometimes after 20-30 hours of mining. I use Nicehash miner.
This is a peak to the log file:

This is not the log of my miner, so it is completely useless for me.

@Claymore

I have a problem with one of my RX480 cards. In the log I see before every crash the same message:

Code:

WATCHDOG: GPU 1 hangs in OpenCL call

Now I want to find out which of my GPUs this is! When I start claymore with the parameter "DI -1", can I be sure that it is directly pointing to GPU 1 or does the ordering changes?

If you did not use "-di" when it showed this message, then "-di 1" will select the card you want to find. Another way is to start miner as usual and press "1" key to disable GPU1 and check its temperature after a minute, it will be cooler than others.

[foxiness]

How many rigs in EthMan do you have?
Currently I'm rewriting some parts of EthMan, network routines too, probably it will help.

Ten rigs.
Btw can any one share h/r on nvidia 1070/1080 in dual mode?

zotaz 1070 mini
75% power limit
-100 core
+550 mem

eth only - 29.5
eth + dcr - 28/270
eth + sia/lbry - 27 / and something for those 2 i forget, but not much

i opted to eth mine only

[avirdoz]

How many rigs in EthMan do you have?
Currently I'm rewriting some parts of EthMan, network routines too, probably it will help.

Ten rigs.
Btw can any one share h/r on nvidia 1070/1080 in dual mode?

zotaz 1070 mini
75% power limit
-100 core
+550 mem

eth only - 29.5
eth + dcr - 28/270
eth + sia/lbry - 27 / and something for those 2 i forget, but not much

i opted to eth mine only

Did you mean 28/2700 for dual with dcr?

[deadsix]

How many rigs in EthMan do you have?
Currently I'm rewriting some parts of EthMan, network routines too, probably it will help.

Eagerly await this update

[Kryptowerk]

I am trying to run ETH+DCR mining.
ETH works fine but I always (I tried 3 different pools now) get the error:
dcr: share rejected

Any idea what could help here?

[in_tempo]

hello, have some problem's


22:58:31:106   1844   args: -epool eth-ru2.dwarfpool.com:8008 -ewal 0x33798287fdeebd894be5197bae5f2df774cbea60 -eworker gtx580 -epsw x
22:58:31:109   1844   
22:58:31:112   1844   ЙHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH»
22:58:31:114   1844   є      Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.3      є
22:58:31:117   1844   ИHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHj
22:58:31:121   1844   
22:58:31:324   1844   ETH: 1 pool is specified
22:58:31:327   1844   Main Ethereum pool is eth-ru2.dwarfpool.com:8008
22:58:31:330   1844   DCR: 0 pool is specified
22:58:31:367   1844   OpenCL platform: NVIDIA CUDA
22:58:31:370   1844   AMD OpenCL platform not found
22:58:31:396   1844   CUDA initializing...

22:58:31:399   1844   NVIDIA Cards available: 1
22:58:31:402   1844   CUDA Driver Version/Runtime Version: 8.0/8.0
22:58:31:408   1844   GPU #0: GeForce GTX 580, 3072 MB available, 16 compute units, capability: 2.0

22:58:31:411   1844   Total cards: 1
22:58:40:878   1844   No AMD cards in the list, ADL library will not be used.
22:58:40:882   1844   NVML version: 8.381.89
22:58:40:929   2ae8   ETH: Stratum - connecting to 'eth-ru2.dwarfpool.com' <185.117.152.148> port 8008
22:58:40:952   2ae8   send: {"worker": "gtx580", "jsonrpc": "2.0", "params": ["0x33798287fdeebd894be5197bae5f2df774cbea60", "x"], "id": 2, "method": "eth_submitLogin"}

22:58:40:956   2ae8   ETH: Stratum - Connected (eth-ru2.dwarfpool.com:8008)
22:58:40:970   2ae8   got 39 bytes
22:58:40:973   2ae8   buf: {"id":2,"jsonrpc":"2.0","result":true}

22:58:40:977   2ae8   parse packet: 38
22:58:40:980   2ae8   ETH: Authorized
22:58:40:984   2ae8   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

22:58:40:988   2ae8   new buf size: 0
22:58:41:012   2ae8   got 244 bytes
22:58:41:015   2ae8   buf: {"result":["0xc9e60b9e7f50f8cd9aa819b2db3b245a5ffd727a30014d11cad6f3ffd0ad9072","0xe586ce62651f6de0be923da595f6773a2d1bd9b41ca0ad927456061ed15c0a14","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


22:58:41:019   2ae8   parse packet: 242
22:58:41:021   1844   No pool specified for Decred! Ethereum-only mining mode is enabled

22:58:41:025   1844   ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)

22:58:41:021   2ae8   ETH: job changed
22:58:41:031   2ae8   new buf size: 0
22:58:41:034   1844   ETH: eth-proxy stratum mode
22:58:41:037   1844   Watchdog enabled
22:58:41:040   1844   Remote management (READ-ONLY MODE) is enabled on port 3333
22:58:41:043   1844   

22:58:41:124   1d64   Setting DAG epoch #122...
22:58:42:984   1d64   Setting DAG epoch #122 for GPU0
22:58:42:988   1d64   Create GPU buffer for GPU0
22:58:43:295   1d64   GPU 0, GpuMiner cu_kd failed 8 (0), invalid device function
22:58:43:299   1d64   GPU 0, Calc DAG failed!

[Two4D2]

Can someone actually tell me how to use this miner? Like...there is no proper guide for it...cant even figure how to run it.

[fittsy]

I am trying to run ETH+DCR mining.
ETH works fine but I always (I tried 3 different pools now) get the error:
dcr: share rejected

Any idea what could help here?

Sounds like you are using an older version. DCR had some changes. You need to be on version 9.2 or 9.3.  Any older versions won't be able to mine Dcred any more.

All Dcred miners had to update.

[fittsy]

Can someone actually tell me how to use this miner? Like...there is no proper guide for it...cant even figure how to run it.

Go to the first post and read it.  It has lots of examples.

You just need to get your own wallet address and change it out with the wallet address in the examples.

[delle54]

I am trying to run ETH+DCR mining.
ETH works fine but I always (I tried 3 different pools now) get the error:
dcr: share rejected

Any idea what could help here?

Please read the instructions. For example new port on suprnova.

[Two4D2]

I am trying to run ETH+DCR mining.
ETH works fine but I always (I tried 3 different pools now) get the error:
dcr: share rejected

Any idea what could help here?

Please read the instructions. For example new port on suprnova.

Been trying to figure out for the past hour, still cant even start it yet just some commands there that I dont even know where to put..

[delle54]

I am trying to run ETH+DCR mining.
ETH works fine but I always (I tried 3 different pools now) get the error:
dcr: share rejected

Any idea what could help here?

Please read the instructions. For example new port on suprnova.

Been trying to figure out for the past hour, still cant even start it yet just some commands there that I dont even know where to put..

Well, it is clearly stated how to use claymore's miner. What else do you need? It's not that hard. PLS show us your bat file.

[Two4D2]

I am trying to run ETH+DCR mining.
ETH works fine but I always (I tried 3 different pools now) get the error:
dcr: share rejected

Any idea what could help here?

Please read the instructions. For example new port on suprnova.

Been trying to figure out for the past hour, still cant even start it yet just some commands there that I dont even know where to put..

Well, it is clearly stated how to use claymore's miner. What else do you need? It's not that hard. PLS show us your bat file.

EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal 0x52bc44d5378309ee2abf1539bf71de1b7c7be3b5/worker1/mail@hotmail.com -epsw x -dpool "http://sia-eu1.nanopool.org:9980/miner/header?address=823147ecc6d363e548194c105fd48d7275f380fcc2fc5147ab2c185f42e27fa5be703b6c1ed2&worker=worker1&email=mail@hotmail.com" -dcoin sia

[Kryptowerk]

I am trying to run ETH+DCR mining.
ETH works fine but I always (I tried 3 different pools now) get the error:
dcr: share rejected

Any idea what could help here?

Sounds like you are using an older version. DCR had some changes. You need to be on version 9.2 or 9.3.  Any older versions won't be able to mine Dcred any more.

All Dcred miners had to update.

Thanks, I somehow downloaded an old version (v. and didn't even notice. My bad. Thanks again.

[Elder III]

I am trying to run ETH+DCR mining.
ETH works fine but I always (I tried 3 different pools now) get the error:
dcr: share rejected

Any idea what could help here?

Please read the instructions. For example new port on suprnova.

Been trying to figure out for the past hour, still cant even start it yet just some commands there that I dont even know where to put..

Well, it is clearly stated how to use claymore's miner. What else do you need? It's not that hard. PLS show us your bat file.

EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal 0x52bc44d5378309ee2abf1539bf71de1b7c7be3b5/worker1/mail@hotmail.com -epsw x -dpool "http://sia-eu1.nanopool.org:9980/miner/header?address=823147ecc6d363e548194c105fd48d7275f380fcc2fc5147ab2c185f42e27fa5be703b6c1ed2&worker=worker1&email=mail@hotmail.com" -dcoin sia

That's not all showing up, but what I can see of it looks incorrect. Follow the directions for Claymore's eth miner here --- https://eth.nanopool.org/help --- just replace the part with your wallett address/worker name/ and email --- don't try setting it up to dual mine until you get it going stable with just Ethereum first.

[ccminer.net]

Is it possible to mine ZCLASSIC with this miner?

No. See Claymore's ZCash AMD GPU Miner v12.4 (Windows/Linux).

Thank you for the tip!!
Do you miner ZCLASSIC?

[Elder III]

Is it possible to mine ZCLASSIC with this miner?

No. See Claymore's ZCash AMD GPU Miner v12.4 (Windows/Linux).

Thank you for the tip!!
Do you miner ZCLASSIC?

That miner should work for AMD cards mining ZCL at several pools. I believe it will work at suprnova among others. If you have NVIDIA then you will need a different miner for ZCL ( I use EWBF's Zcash cuda miner for ZCL on NVIDIA).