Drawde
Member
 Offline
Activity: 87
Merit: 11
|
 |
May 05, 2017, 03:28:13 PM |
|
I got the dual mining working via Nicehash.
I tried LBRY and also PASCAL but both of them slowed down my ETH mining substantially... by about 6 MH/s for either of them.
I also tried DCR and it doesn't show any speed penalty... but is having 100% rejection rate.
Ideas on that ?
What version of the miner are you using? For DCR you can only use 9.2 and 9.3 due to header change. Earlier versions will only create invalid shares. Also once you are using the correct version for the DCR header change you may want to adjust the DCR intensity so as not to greatly impact ETH mining performance. The default dcri intensity is 30 but I found that -dcri 25 works well for my RX 470s. |
|
|
|
|
|
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
AzzAz
Legendary
Offline
Activity: 1030
Merit: 1006
|
|
May 05, 2017, 04:27:39 PM |
|
I seem to have an issue, well two issues. #1 the miner crashes/freezes after it exits or the watchdog restarts it and I can't figure out why. #2 here's a the log file of the GPUs halting and the miner restarting. Why did the GPUs stop, I can't figure out why? It crashed/froze after it restarted and I lost many hours of mining time. 00:23:58:748 3cff9700 parse packet: 236
00:23:58:748 3cff9700 ETH: job changed
00:23:58:748 3cff9700 new buf size: 0
00:23:58:748 3cff9700 ETH: 05/05/17-00:23:58 - New job from musicoin.nomnom.technology:9999
00:23:58:748 3cff9700 target: 0x0000000225c17d04 (diff: 2000MH), epoch #13
00:23:58:748 3cff9700 ETH - Total Speed: 98.703 Mh/s, Total Shares: 1080, Rejected: 2, Time: 06:02
00:23:58:748 3cff9700 ETH: GPU0 15.153 Mh/s, GPU1 19.916 Mh/s, GPU2 21.565 Mh/s, GPU3 21.514 Mh/s, GPU4 20.555 Mh/s
00:23:58:748 3cff9700 DCR - Total Speed: 5922.173 Mh/s, Total Shares: 1150, Rejected: 3
00:23:58:748 3cff9700 DCR: GPU0 909.169 Mh/s, GPU1 1194.958 Mh/s, GPU2 1293.899 Mh/s, GPU3 1290.819 Mh/s, GPU4 1233.328 Mh/s
00:23:58:888 68a84740 GPU0 t=62C fan=90%, GPU1 t=63C fan=84%, GPU2 t=61C fan=43%, GPU3 t=59C fan=40%, GPU4 t=62C fan=40%
00:23:58:888 68a84740 em hbt: 1, dm hbt: 1, fm hbt: 1,
00:23:58:888 68a84740 watchdog - thread 0, hb time 2758
00:23:58:888 68a84740 watchdog - thread 1, hb time 2794
00:23:58:888 68a84740 watchdog - thread 2, hb time 2801
00:23:58:888 68a84740 watchdog - thread 3, hb time 2775
00:23:58:889 68a84740 watchdog - thread 4, hb time 2775
00:23:58:889 68a84740 watchdog - thread 5, hb time 2799
00:23:58:889 68a84740 watchdog - thread 6, hb time 2771
00:23:58:889 68a84740 watchdog - thread 7, hb time 2796
00:23:58:889 68a84740 watchdog - thread 8, hb time 2809
00:23:58:889 68a84740 watchdog - thread 9, hb time 2783
00:23:59:318 3cff9700 ETH: checking pool connection...
00:23:59:318 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
00:23:59:352 3cff9700 got 237 bytes
00:23:59:352 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}
00:23:59:352 3cff9700 parse packet: 236
00:23:59:352 3cff9700 ETH: job is the same
00:23:59:352 3cff9700 new buf size: 0
00:24:03:769 3dffb700 GPU4 DAG creation time - 5018 ms
00:24:03:769 3dffb700 Setting DAG epoch #121 for GPU4 done
00:24:03:769 3dffb700 DevFee: restart timer because of updating DAG
00:24:03:769 5544e700 Setting DAG epoch #121 for GPU1
00:24:07:855 3cff9700 send: {"id":6,"worker":"linux","jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x139a9fb", "0x000000000000000000000000000000000000000000000000000000003a79d94e"]}
00:24:07:889 3cff9700 got 39 bytes
00:24:07:889 3cff9700 buf: {"id":6,"jsonrpc":"2.0","result":true}
00:24:07:889 3cff9700 parse packet: 38
00:24:07:889 3cff9700 new buf size: 0
00:24:08:763 5544e700 GPU1 DAG creation time - 4894 ms
00:24:08:763 5544e700 Setting DAG epoch #121 for GPU1 done
00:24:08:763 5544e700 DevFee: restart timer because of updating DAG
00:24:08:763 3f7fe700 Setting DAG epoch #121 for GPU2
00:24:09:319 3cff9700 ETH: checking pool connection...
00:24:09:319 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
00:24:09:354 3cff9700 got 237 bytes
00:24:09:354 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}
00:24:09:354 3cff9700 parse packet: 236
00:24:09:354 3cff9700 ETH: job is the same
00:24:09:354 3cff9700 new buf size: 0
00:24:10:864 5544e700 ETH: put share nonce 289644a40270f06d
00:24:10:864 5544e700 DevFee: ETH round found 1 shares
00:24:10:864 3bff7700 DevFee: ETH: 05/05/17-00:24:10 - SHARE FOUND - (GPU 1)
00:24:10:864 3bff7700 send: {"id":4,"method":"eth_submitWork","params":["0x289644a40270f06d","0xd3fceb4972e2bb316d331c1ac07c817488888b6fbea6fca37f6bcce90a169121","0x479ed8ffc20b8e8989ea6ac9dd0d411f394bd07777174f2c774a65a4d2f5a815"]}
00:24:10:961 3bff7700 got 39 bytes
00:24:10:961 3bff7700 buf: {"id":4,"jsonrpc":"2.0","result":true}
00:24:10:961 3bff7700 parse packet: 38
00:24:10:961 3bff7700 ETH: Share accepted (96 ms)!
00:24:10:961 3bff7700 new buf size: 0
00:24:10:980 3bff7700 got 248 bytes
00:24:10:980 3bff7700 buf: {"id":0,"jsonrpc":"2.0","result":["0x2cf04207cd9afbc1e426cda6b5e286ca84d6986fe0f5aa063a7d398af9b661b5","0x064ef82d7269405eb06162f7d33f2b6aa2a23741c9a0d06a648460e17b48ab4c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x37bf46"]}
00:24:10:980 3bff7700 parse packet: 247
00:24:10:980 3bff7700 ETH: job changed
00:24:10:980 3bff7700 new buf size: 0
00:24:10:980 3bff7700 DevFee: ETH: 05/05/17-00:24:10 - New job from us1.ethpool.org:3333
00:24:10:980 3bff7700 target: 0x0000000112e0be82
00:24:13:879 3f7fe700 GPU2 DAG creation time - 5017 ms
00:24:13:879 3f7fe700 Setting DAG epoch #121 for GPU2 done
00:24:13:879 3f7fe700 DevFee: restart timer because of updating DAG
00:24:13:879 3e7fc700 Setting DAG epoch #121 for GPU3
00:24:16:907 68a84740 Got incorrect temperature 511, ignore
00:24:16:907 68a84740 Got incorrect temperature 511, ignore
00:24:16:907 68a84740 Got incorrect temperature 511, ignore
00:24:16:908 68a84740 Got incorrect temperature 511, ignore
00:24:19:321 3cff9700 ETH: checking pool connection...
00:24:19:321 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
00:24:19:357 3cff9700 got 237 bytes
00:24:19:357 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}
00:24:19:357 3cff9700 parse packet: 236
00:24:19:357 3cff9700 ETH: job is the same
00:24:19:357 3cff9700 new buf size: 0
00:24:19:494 3cff9700 got 237 bytes
00:24:19:495 3cff9700 buf: {"id":0,"jsonrpc":"2.0","result":["0x3c2c66c4303add4353de34af2e76d112c2907f95e17ebd94372d57484596e0e4","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}
00:24:19:495 3cff9700 parse packet: 236
00:24:19:495 3cff9700 ETH: job changed
00:24:19:495 3cff9700 new buf size: 0
00:24:19:495 3cff9700 ETH: 05/05/17-00:24:19 - New job from musicoin.nomnom.technology:9999
00:24:19:495 3cff9700 target: 0x0000000225c17d04 (diff: 2000MH), epoch #13
00:24:19:495 3cff9700 ETH - Total Speed: 0.000 Mh/s, Total Shares: 1080, Rejected: 2, Time: 06:03
00:24:19:495 3cff9700 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
00:24:19:495 3cff9700 DCR - Total Speed: 0.000 Mh/s, Total Shares: 1150, Rejected: 3
00:24:19:495 3cff9700 DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
00:24:19:910 68a84740 Got incorrect temperature 511, ignore
00:24:19:910 68a84740 Got incorrect temperature 511, ignore
00:24:19:910 68a84740 Got incorrect temperature 511, ignore
00:24:19:910 68a84740 Got incorrect temperature 511, ignore
00:24:20:012 3bff7700 got 248 bytes
00:24:20:012 3bff7700 buf: {"id":0,"jsonrpc":"2.0","result":["0xe22b4abeb25b318936269369f09a2b7f3fee6ab4d84512e5d2490fc7444e1e5d","0x064ef82d7269405eb06162f7d33f2b6aa2a23741c9a0d06a648460e17b48ab4c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x37bf47"]}
Same things happens to me so I used "-r 1" with a reboot. bat and the miner reboots my computer instead of restarting and hanging. Mind to share your reboot.bat file ? And- I had same "incorrect temp 511" log, riser was burning @ molex, yellow (12V ) pin... Your cards are overburdened. |
|
|
|
|
|
rawbot
|
|
May 05, 2017, 04:55:07 PM |
|
I have a spare 6 pin sata port on my EVGA supernova modular PSU. If I buy a 6 pin male to 6 pin male modular cable, can I plug that into my PCIE riser to power it safely?
I really need an answer to this if anybody could help |
|
|
|
|
jackbox
Legendary
Offline
Activity: 1246
Merit: 1024
|
|
May 05, 2017, 04:59:22 PM |
|
I seem to have an issue, well two issues. #1 the miner crashes/freezes after it exits or the watchdog restarts it and I can't figure out why. #2 here's a the log file of the GPUs halting and the miner restarting. Why did the GPUs stop, I can't figure out why? It crashed/froze after it restarted and I lost many hours of mining time. 00:23:58:748 3cff9700 parse packet: 236
00:23:58:748 3cff9700 ETH: job changed
00:23:58:748 3cff9700 new buf size: 0
00:23:58:748 3cff9700 ETH: 05/05/17-00:23:58 - New job from musicoin.nomnom.technology:9999
00:23:58:748 3cff9700 target: 0x0000000225c17d04 (diff: 2000MH), epoch #13
00:23:58:748 3cff9700 ETH - Total Speed: 98.703 Mh/s, Total Shares: 1080, Rejected: 2, Time: 06:02
00:23:58:748 3cff9700 ETH: GPU0 15.153 Mh/s, GPU1 19.916 Mh/s, GPU2 21.565 Mh/s, GPU3 21.514 Mh/s, GPU4 20.555 Mh/s
00:23:58:748 3cff9700 DCR - Total Speed: 5922.173 Mh/s, Total Shares: 1150, Rejected: 3
00:23:58:748 3cff9700 DCR: GPU0 909.169 Mh/s, GPU1 1194.958 Mh/s, GPU2 1293.899 Mh/s, GPU3 1290.819 Mh/s, GPU4 1233.328 Mh/s
00:23:58:888 68a84740 GPU0 t=62C fan=90%, GPU1 t=63C fan=84%, GPU2 t=61C fan=43%, GPU3 t=59C fan=40%, GPU4 t=62C fan=40%
00:23:58:888 68a84740 em hbt: 1, dm hbt: 1, fm hbt: 1,
00:23:58:888 68a84740 watchdog - thread 0, hb time 2758
00:23:58:888 68a84740 watchdog - thread 1, hb time 2794
00:23:58:888 68a84740 watchdog - thread 2, hb time 2801
00:23:58:888 68a84740 watchdog - thread 3, hb time 2775
00:23:58:889 68a84740 watchdog - thread 4, hb time 2775
00:23:58:889 68a84740 watchdog - thread 5, hb time 2799
00:23:58:889 68a84740 watchdog - thread 6, hb time 2771
00:23:58:889 68a84740 watchdog - thread 7, hb time 2796
00:23:58:889 68a84740 watchdog - thread 8, hb time 2809
00:23:58:889 68a84740 watchdog - thread 9, hb time 2783
00:23:59:318 3cff9700 ETH: checking pool connection...
00:23:59:318 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
00:23:59:352 3cff9700 got 237 bytes
00:23:59:352 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}
00:23:59:352 3cff9700 parse packet: 236
00:23:59:352 3cff9700 ETH: job is the same
00:23:59:352 3cff9700 new buf size: 0
00:24:03:769 3dffb700 GPU4 DAG creation time - 5018 ms
00:24:03:769 3dffb700 Setting DAG epoch #121 for GPU4 done
00:24:03:769 3dffb700 DevFee: restart timer because of updating DAG
00:24:03:769 5544e700 Setting DAG epoch #121 for GPU1
00:24:07:855 3cff9700 send: {"id":6,"worker":"linux","jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x139a9fb", "0x000000000000000000000000000000000000000000000000000000003a79d94e"]}
00:24:07:889 3cff9700 got 39 bytes
00:24:07:889 3cff9700 buf: {"id":6,"jsonrpc":"2.0","result":true}
00:24:07:889 3cff9700 parse packet: 38
00:24:07:889 3cff9700 new buf size: 0
00:24:08:763 5544e700 GPU1 DAG creation time - 4894 ms
00:24:08:763 5544e700 Setting DAG epoch #121 for GPU1 done
00:24:08:763 5544e700 DevFee: restart timer because of updating DAG
00:24:08:763 3f7fe700 Setting DAG epoch #121 for GPU2
00:24:09:319 3cff9700 ETH: checking pool connection...
00:24:09:319 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
00:24:09:354 3cff9700 got 237 bytes
00:24:09:354 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}
00:24:09:354 3cff9700 parse packet: 236
00:24:09:354 3cff9700 ETH: job is the same
00:24:09:354 3cff9700 new buf size: 0
00:24:10:864 5544e700 ETH: put share nonce 289644a40270f06d
00:24:10:864 5544e700 DevFee: ETH round found 1 shares
00:24:10:864 3bff7700 DevFee: ETH: 05/05/17-00:24:10 - SHARE FOUND - (GPU 1)
00:24:10:864 3bff7700 send: {"id":4,"method":"eth_submitWork","params":["0x289644a40270f06d","0xd3fceb4972e2bb316d331c1ac07c817488888b6fbea6fca37f6bcce90a169121","0x479ed8ffc20b8e8989ea6ac9dd0d411f394bd07777174f2c774a65a4d2f5a815"]}
00:24:10:961 3bff7700 got 39 bytes
00:24:10:961 3bff7700 buf: {"id":4,"jsonrpc":"2.0","result":true}
00:24:10:961 3bff7700 parse packet: 38
00:24:10:961 3bff7700 ETH: Share accepted (96 ms)!
00:24:10:961 3bff7700 new buf size: 0
00:24:10:980 3bff7700 got 248 bytes
00:24:10:980 3bff7700 buf: {"id":0,"jsonrpc":"2.0","result":["0x2cf04207cd9afbc1e426cda6b5e286ca84d6986fe0f5aa063a7d398af9b661b5","0x064ef82d7269405eb06162f7d33f2b6aa2a23741c9a0d06a648460e17b48ab4c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x37bf46"]}
00:24:10:980 3bff7700 parse packet: 247
00:24:10:980 3bff7700 ETH: job changed
00:24:10:980 3bff7700 new buf size: 0
00:24:10:980 3bff7700 DevFee: ETH: 05/05/17-00:24:10 - New job from us1.ethpool.org:3333
00:24:10:980 3bff7700 target: 0x0000000112e0be82
00:24:13:879 3f7fe700 GPU2 DAG creation time - 5017 ms
00:24:13:879 3f7fe700 Setting DAG epoch #121 for GPU2 done
00:24:13:879 3f7fe700 DevFee: restart timer because of updating DAG
00:24:13:879 3e7fc700 Setting DAG epoch #121 for GPU3
00:24:16:907 68a84740 Got incorrect temperature 511, ignore
00:24:16:907 68a84740 Got incorrect temperature 511, ignore
00:24:16:907 68a84740 Got incorrect temperature 511, ignore
00:24:16:908 68a84740 Got incorrect temperature 511, ignore
00:24:19:321 3cff9700 ETH: checking pool connection...
00:24:19:321 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
00:24:19:357 3cff9700 got 237 bytes
00:24:19:357 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}
00:24:19:357 3cff9700 parse packet: 236
00:24:19:357 3cff9700 ETH: job is the same
00:24:19:357 3cff9700 new buf size: 0
00:24:19:494 3cff9700 got 237 bytes
00:24:19:495 3cff9700 buf: {"id":0,"jsonrpc":"2.0","result":["0x3c2c66c4303add4353de34af2e76d112c2907f95e17ebd94372d57484596e0e4","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}
00:24:19:495 3cff9700 parse packet: 236
00:24:19:495 3cff9700 ETH: job changed
00:24:19:495 3cff9700 new buf size: 0
00:24:19:495 3cff9700 ETH: 05/05/17-00:24:19 - New job from musicoin.nomnom.technology:9999
00:24:19:495 3cff9700 target: 0x0000000225c17d04 (diff: 2000MH), epoch #13
00:24:19:495 3cff9700 ETH - Total Speed: 0.000 Mh/s, Total Shares: 1080, Rejected: 2, Time: 06:03
00:24:19:495 3cff9700 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
00:24:19:495 3cff9700 DCR - Total Speed: 0.000 Mh/s, Total Shares: 1150, Rejected: 3
00:24:19:495 3cff9700 DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
00:24:19:910 68a84740 Got incorrect temperature 511, ignore
00:24:19:910 68a84740 Got incorrect temperature 511, ignore
00:24:19:910 68a84740 Got incorrect temperature 511, ignore
00:24:19:910 68a84740 Got incorrect temperature 511, ignore
00:24:20:012 3bff7700 got 248 bytes
00:24:20:012 3bff7700 buf: {"id":0,"jsonrpc":"2.0","result":["0xe22b4abeb25b318936269369f09a2b7f3fee6ab4d84512e5d2490fc7444e1e5d","0x064ef82d7269405eb06162f7d33f2b6aa2a23741c9a0d06a648460e17b48ab4c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x37bf47"]}
Same things happens to me so I used "-r 1" with a reboot. bat and the miner reboots my computer instead of restarting and hanging. Mind to share your reboot.bat file ? And- I had same "incorrect temp 511" log, riser was burning @ molex, yellow (12V ) pin... Your cards are overburdened. It is on the OP under the -r option. Claymore tells you what to put in the reboot.bat to execute a reboot. Just go to page 1 and the first post and look for it. |
|
|
|
AzzAz
Legendary
Offline
Activity: 1030
Merit: 1006
|
|
May 05, 2017, 05:21:33 PM |
|
I have a spare 6 pin sata port on my EVGA supernova modular PSU. If I buy a 6 pin male to 6 pin male modular cable, can I plug that into my PCIE riser to power it safely?
I really need an answer to this if anybody could help You can but power of it is same as SATA.And many connections are not good idea. Best is to cut wires and make it directly to 6 PIN |
|
|
|
|
|
PPOC
|
|
May 05, 2017, 05:25:13 PM |
|
Running latest 9.3 miner on a GTX1080 liquid cooled rig with an i7700. Running dual ETH and DCR, Miner starts fine and does 21 Eth and 210 Dcr. Always seams to be a 10X relationship between ETH and DCR. After 5-10 min, its start dropping slowly and levels off around 11 ETH and 110 DCR. Anyone have anything similar with 1080, 1070 or 1060?
This also happens when I do ETH only, that starts out around 23 and slowly drops to 12 or so after 10m or so.
Any help greatly appreciated!
|
BTC: 1Bo6YsPeHCrVRygHLJg9BwHeaLSQpppcJi
"Lost coins only make everyone else’s coins worth slightly more. Think of it as a donation to everyone."
|
|
|
AzzAz
Legendary
Offline
Activity: 1030
Merit: 1006
|
|
May 05, 2017, 05:30:37 PM |
|
I seem to have an issue, well two issues. #1 the miner crashes/freezes after it exits or the watchdog restarts it and I can't figure out why. #2 here's a the log file of the GPUs halting and the miner restarting. Why did the GPUs stop, I can't figure out why? It crashed/froze after it restarted and I lost many hours of mining time. 00:23:58:748 3cff9700 parse packet: 236
00:23:58:748 3cff9700 ETH: job changed
00:23:58:748 3cff9700 new buf size: 0
00:23:58:748 3cff9700 ETH: 05/05/17-00:23:58 - New job from musicoin.nomnom.technology:9999
00:23:58:748 3cff9700 target: 0x0000000225c17d04 (diff: 2000MH), epoch #13
00:23:58:748 3cff9700 ETH - Total Speed: 98.703 Mh/s, Total Shares: 1080, Rejected: 2, Time: 06:02
00:23:58:748 3cff9700 ETH: GPU0 15.153 Mh/s, GPU1 19.916 Mh/s, GPU2 21.565 Mh/s, GPU3 21.514 Mh/s, GPU4 20.555 Mh/s
00:23:58:748 3cff9700 DCR - Total Speed: 5922.173 Mh/s, Total Shares: 1150, Rejected: 3
00:23:58:748 3cff9700 DCR: GPU0 909.169 Mh/s, GPU1 1194.958 Mh/s, GPU2 1293.899 Mh/s, GPU3 1290.819 Mh/s, GPU4 1233.328 Mh/s
00:23:58:888 68a84740 GPU0 t=62C fan=90%, GPU1 t=63C fan=84%, GPU2 t=61C fan=43%, GPU3 t=59C fan=40%, GPU4 t=62C fan=40%
00:23:58:888 68a84740 em hbt: 1, dm hbt: 1, fm hbt: 1,
00:23:58:888 68a84740 watchdog - thread 0, hb time 2758
00:23:58:888 68a84740 watchdog - thread 1, hb time 2794
00:23:58:888 68a84740 watchdog - thread 2, hb time 2801
00:23:58:888 68a84740 watchdog - thread 3, hb time 2775
00:23:58:889 68a84740 watchdog - thread 4, hb time 2775
00:23:58:889 68a84740 watchdog - thread 5, hb time 2799
00:23:58:889 68a84740 watchdog - thread 6, hb time 2771
00:23:58:889 68a84740 watchdog - thread 7, hb time 2796
00:23:58:889 68a84740 watchdog - thread 8, hb time 2809
00:23:58:889 68a84740 watchdog - thread 9, hb time 2783
00:23:59:318 3cff9700 ETH: checking pool connection...
00:23:59:318 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
00:23:59:352 3cff9700 got 237 bytes
00:23:59:352 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}
00:23:59:352 3cff9700 parse packet: 236
00:23:59:352 3cff9700 ETH: job is the same
00:23:59:352 3cff9700 new buf size: 0
00:24:03:769 3dffb700 GPU4 DAG creation time - 5018 ms
00:24:03:769 3dffb700 Setting DAG epoch #121 for GPU4 done
00:24:03:769 3dffb700 DevFee: restart timer because of updating DAG
00:24:03:769 5544e700 Setting DAG epoch #121 for GPU1
00:24:07:855 3cff9700 send: {"id":6,"worker":"linux","jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x139a9fb", "0x000000000000000000000000000000000000000000000000000000003a79d94e"]}
00:24:07:889 3cff9700 got 39 bytes
00:24:07:889 3cff9700 buf: {"id":6,"jsonrpc":"2.0","result":true}
00:24:07:889 3cff9700 parse packet: 38
00:24:07:889 3cff9700 new buf size: 0
00:24:08:763 5544e700 GPU1 DAG creation time - 4894 ms
00:24:08:763 5544e700 Setting DAG epoch #121 for GPU1 done
00:24:08:763 5544e700 DevFee: restart timer because of updating DAG
00:24:08:763 3f7fe700 Setting DAG epoch #121 for GPU2
00:24:09:319 3cff9700 ETH: checking pool connection...
00:24:09:319 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
00:24:09:354 3cff9700 got 237 bytes
00:24:09:354 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}
00:24:09:354 3cff9700 parse packet: 236
00:24:09:354 3cff9700 ETH: job is the same
00:24:09:354 3cff9700 new buf size: 0
00:24:10:864 5544e700 ETH: put share nonce 289644a40270f06d
00:24:10:864 5544e700 DevFee: ETH round found 1 shares
00:24:10:864 3bff7700 DevFee: ETH: 05/05/17-00:24:10 - SHARE FOUND - (GPU 1)
00:24:10:864 3bff7700 send: {"id":4,"method":"eth_submitWork","params":["0x289644a40270f06d","0xd3fceb4972e2bb316d331c1ac07c817488888b6fbea6fca37f6bcce90a169121","0x479ed8ffc20b8e8989ea6ac9dd0d411f394bd07777174f2c774a65a4d2f5a815"]}
00:24:10:961 3bff7700 got 39 bytes
00:24:10:961 3bff7700 buf: {"id":4,"jsonrpc":"2.0","result":true}
00:24:10:961 3bff7700 parse packet: 38
00:24:10:961 3bff7700 ETH: Share accepted (96 ms)!
00:24:10:961 3bff7700 new buf size: 0
00:24:10:980 3bff7700 got 248 bytes
00:24:10:980 3bff7700 buf: {"id":0,"jsonrpc":"2.0","result":["0x2cf04207cd9afbc1e426cda6b5e286ca84d6986fe0f5aa063a7d398af9b661b5","0x064ef82d7269405eb06162f7d33f2b6aa2a23741c9a0d06a648460e17b48ab4c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x37bf46"]}
00:24:10:980 3bff7700 parse packet: 247
00:24:10:980 3bff7700 ETH: job changed
00:24:10:980 3bff7700 new buf size: 0
00:24:10:980 3bff7700 DevFee: ETH: 05/05/17-00:24:10 - New job from us1.ethpool.org:3333
00:24:10:980 3bff7700 target: 0x0000000112e0be82
00:24:13:879 3f7fe700 GPU2 DAG creation time - 5017 ms
00:24:13:879 3f7fe700 Setting DAG epoch #121 for GPU2 done
00:24:13:879 3f7fe700 DevFee: restart timer because of updating DAG
00:24:13:879 3e7fc700 Setting DAG epoch #121 for GPU3
00:24:16:907 68a84740 Got incorrect temperature 511, ignore
00:24:16:907 68a84740 Got incorrect temperature 511, ignore
00:24:16:907 68a84740 Got incorrect temperature 511, ignore
00:24:16:908 68a84740 Got incorrect temperature 511, ignore
00:24:19:321 3cff9700 ETH: checking pool connection...
00:24:19:321 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
00:24:19:357 3cff9700 got 237 bytes
00:24:19:357 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}
00:24:19:357 3cff9700 parse packet: 236
00:24:19:357 3cff9700 ETH: job is the same
00:24:19:357 3cff9700 new buf size: 0
00:24:19:494 3cff9700 got 237 bytes
00:24:19:495 3cff9700 buf: {"id":0,"jsonrpc":"2.0","result":["0x3c2c66c4303add4353de34af2e76d112c2907f95e17ebd94372d57484596e0e4","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}
00:24:19:495 3cff9700 parse packet: 236
00:24:19:495 3cff9700 ETH: job changed
00:24:19:495 3cff9700 new buf size: 0
00:24:19:495 3cff9700 ETH: 05/05/17-00:24:19 - New job from musicoin.nomnom.technology:9999
00:24:19:495 3cff9700 target: 0x0000000225c17d04 (diff: 2000MH), epoch #13
00:24:19:495 3cff9700 ETH - Total Speed: 0.000 Mh/s, Total Shares: 1080, Rejected: 2, Time: 06:03
00:24:19:495 3cff9700 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
00:24:19:495 3cff9700 DCR - Total Speed: 0.000 Mh/s, Total Shares: 1150, Rejected: 3
00:24:19:495 3cff9700 DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
00:24:19:910 68a84740 Got incorrect temperature 511, ignore
00:24:19:910 68a84740 Got incorrect temperature 511, ignore
00:24:19:910 68a84740 Got incorrect temperature 511, ignore
00:24:19:910 68a84740 Got incorrect temperature 511, ignore
00:24:20:012 3bff7700 got 248 bytes
00:24:20:012 3bff7700 buf: {"id":0,"jsonrpc":"2.0","result":["0xe22b4abeb25b318936269369f09a2b7f3fee6ab4d84512e5d2490fc7444e1e5d","0x064ef82d7269405eb06162f7d33f2b6aa2a23741c9a0d06a648460e17b48ab4c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x37bf47"]}
Same things happens to me so I used "-r 1" with a reboot. bat and the miner reboots my computer instead of restarting and hanging. Mind to share your reboot.bat file ? And- I had same "incorrect temp 511" log, riser was burning @ molex, yellow (12V ) pin... Your cards are overburdened. It is on the OP under the -r option. Claymore tells you what to put in the reboot.bat to execute a reboot. Just go to page 1 and the first post and look for it. so your reboot.bat contains "shutdown /r /t 5 /f" ? Because that is where you pointed me. See, I try to be helpful sharing my experience with you. From other side you tell me to read OP? Next time you ask for advice/help I will point you to page 1. @PPOC: Temps? |
|
|
|
|
|
PPOC
|
|
May 05, 2017, 05:44:32 PM |
|
I seem to have an issue, well two issues. #1 the miner crashes/freezes after it exits or the watchdog restarts it and I can't figure out why. #2 here's a the log file of the GPUs halting and the miner restarting. Why did the GPUs stop, I can't figure out why? It crashed/froze after it restarted and I lost many hours of mining time. 00:23:58:748 3cff9700 parse packet: 236
00:23:58:748 3cff9700 ETH: job changed
00:23:58:748 3cff9700 new buf size: 0
00:23:58:748 3cff9700 ETH: 05/05/17-00:23:58 - New job from musicoin.nomnom.technology:9999
00:23:58:748 3cff9700 target: 0x0000000225c17d04 (diff: 2000MH), epoch #13
00:23:58:748 3cff9700 ETH - Total Speed: 98.703 Mh/s, Total Shares: 1080, Rejected: 2, Time: 06:02
00:23:58:748 3cff9700 ETH: GPU0 15.153 Mh/s, GPU1 19.916 Mh/s, GPU2 21.565 Mh/s, GPU3 21.514 Mh/s, GPU4 20.555 Mh/s
00:23:58:748 3cff9700 DCR - Total Speed: 5922.173 Mh/s, Total Shares: 1150, Rejected: 3
00:23:58:748 3cff9700 DCR: GPU0 909.169 Mh/s, GPU1 1194.958 Mh/s, GPU2 1293.899 Mh/s, GPU3 1290.819 Mh/s, GPU4 1233.328 Mh/s
00:23:58:888 68a84740 GPU0 t=62C fan=90%, GPU1 t=63C fan=84%, GPU2 t=61C fan=43%, GPU3 t=59C fan=40%, GPU4 t=62C fan=40%
00:23:58:888 68a84740 em hbt: 1, dm hbt: 1, fm hbt: 1,
00:23:58:888 68a84740 watchdog - thread 0, hb time 2758
00:23:58:888 68a84740 watchdog - thread 1, hb time 2794
00:23:58:888 68a84740 watchdog - thread 2, hb time 2801
00:23:58:888 68a84740 watchdog - thread 3, hb time 2775
00:23:58:889 68a84740 watchdog - thread 4, hb time 2775
00:23:58:889 68a84740 watchdog - thread 5, hb time 2799
00:23:58:889 68a84740 watchdog - thread 6, hb time 2771
00:23:58:889 68a84740 watchdog - thread 7, hb time 2796
00:23:58:889 68a84740 watchdog - thread 8, hb time 2809
00:23:58:889 68a84740 watchdog - thread 9, hb time 2783
00:23:59:318 3cff9700 ETH: checking pool connection...
00:23:59:318 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
00:23:59:352 3cff9700 got 237 bytes
00:23:59:352 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}
00:23:59:352 3cff9700 parse packet: 236
00:23:59:352 3cff9700 ETH: job is the same
00:23:59:352 3cff9700 new buf size: 0
00:24:03:769 3dffb700 GPU4 DAG creation time - 5018 ms
00:24:03:769 3dffb700 Setting DAG epoch #121 for GPU4 done
00:24:03:769 3dffb700 DevFee: restart timer because of updating DAG
00:24:03:769 5544e700 Setting DAG epoch #121 for GPU1
00:24:07:855 3cff9700 send: {"id":6,"worker":"linux","jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x139a9fb", "0x000000000000000000000000000000000000000000000000000000003a79d94e"]}
00:24:07:889 3cff9700 got 39 bytes
00:24:07:889 3cff9700 buf: {"id":6,"jsonrpc":"2.0","result":true}
00:24:07:889 3cff9700 parse packet: 38
00:24:07:889 3cff9700 new buf size: 0
00:24:08:763 5544e700 GPU1 DAG creation time - 4894 ms
00:24:08:763 5544e700 Setting DAG epoch #121 for GPU1 done
00:24:08:763 5544e700 DevFee: restart timer because of updating DAG
00:24:08:763 3f7fe700 Setting DAG epoch #121 for GPU2
00:24:09:319 3cff9700 ETH: checking pool connection...
00:24:09:319 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
00:24:09:354 3cff9700 got 237 bytes
00:24:09:354 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}
00:24:09:354 3cff9700 parse packet: 236
00:24:09:354 3cff9700 ETH: job is the same
00:24:09:354 3cff9700 new buf size: 0
00:24:10:864 5544e700 ETH: put share nonce 289644a40270f06d
00:24:10:864 5544e700 DevFee: ETH round found 1 shares
00:24:10:864 3bff7700 DevFee: ETH: 05/05/17-00:24:10 - SHARE FOUND - (GPU 1)
00:24:10:864 3bff7700 send: {"id":4,"method":"eth_submitWork","params":["0x289644a40270f06d","0xd3fceb4972e2bb316d331c1ac07c817488888b6fbea6fca37f6bcce90a169121","0x479ed8ffc20b8e8989ea6ac9dd0d411f394bd07777174f2c774a65a4d2f5a815"]}
00:24:10:961 3bff7700 got 39 bytes
00:24:10:961 3bff7700 buf: {"id":4,"jsonrpc":"2.0","result":true}
00:24:10:961 3bff7700 parse packet: 38
00:24:10:961 3bff7700 ETH: Share accepted (96 ms)!
00:24:10:961 3bff7700 new buf size: 0
00:24:10:980 3bff7700 got 248 bytes
00:24:10:980 3bff7700 buf: {"id":0,"jsonrpc":"2.0","result":["0x2cf04207cd9afbc1e426cda6b5e286ca84d6986fe0f5aa063a7d398af9b661b5","0x064ef82d7269405eb06162f7d33f2b6aa2a23741c9a0d06a648460e17b48ab4c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x37bf46"]}
00:24:10:980 3bff7700 parse packet: 247
00:24:10:980 3bff7700 ETH: job changed
00:24:10:980 3bff7700 new buf size: 0
00:24:10:980 3bff7700 DevFee: ETH: 05/05/17-00:24:10 - New job from us1.ethpool.org:3333
00:24:10:980 3bff7700 target: 0x0000000112e0be82
00:24:13:879 3f7fe700 GPU2 DAG creation time - 5017 ms
00:24:13:879 3f7fe700 Setting DAG epoch #121 for GPU2 done
00:24:13:879 3f7fe700 DevFee: restart timer because of updating DAG
00:24:13:879 3e7fc700 Setting DAG epoch #121 for GPU3
00:24:16:907 68a84740 Got incorrect temperature 511, ignore
00:24:16:907 68a84740 Got incorrect temperature 511, ignore
00:24:16:907 68a84740 Got incorrect temperature 511, ignore
00:24:16:908 68a84740 Got incorrect temperature 511, ignore
00:24:19:321 3cff9700 ETH: checking pool connection...
00:24:19:321 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
00:24:19:357 3cff9700 got 237 bytes
00:24:19:357 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}
00:24:19:357 3cff9700 parse packet: 236
00:24:19:357 3cff9700 ETH: job is the same
00:24:19:357 3cff9700 new buf size: 0
00:24:19:494 3cff9700 got 237 bytes
00:24:19:495 3cff9700 buf: {"id":0,"jsonrpc":"2.0","result":["0x3c2c66c4303add4353de34af2e76d112c2907f95e17ebd94372d57484596e0e4","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}
00:24:19:495 3cff9700 parse packet: 236
00:24:19:495 3cff9700 ETH: job changed
00:24:19:495 3cff9700 new buf size: 0
00:24:19:495 3cff9700 ETH: 05/05/17-00:24:19 - New job from musicoin.nomnom.technology:9999
00:24:19:495 3cff9700 target: 0x0000000225c17d04 (diff: 2000MH), epoch #13
00:24:19:495 3cff9700 ETH - Total Speed: 0.000 Mh/s, Total Shares: 1080, Rejected: 2, Time: 06:03
00:24:19:495 3cff9700 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
00:24:19:495 3cff9700 DCR - Total Speed: 0.000 Mh/s, Total Shares: 1150, Rejected: 3
00:24:19:495 3cff9700 DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
00:24:19:910 68a84740 Got incorrect temperature 511, ignore
00:24:19:910 68a84740 Got incorrect temperature 511, ignore
00:24:19:910 68a84740 Got incorrect temperature 511, ignore
00:24:19:910 68a84740 Got incorrect temperature 511, ignore
00:24:20:012 3bff7700 got 248 bytes
00:24:20:012 3bff7700 buf: {"id":0,"jsonrpc":"2.0","result":["0xe22b4abeb25b318936269369f09a2b7f3fee6ab4d84512e5d2490fc7444e1e5d","0x064ef82d7269405eb06162f7d33f2b6aa2a23741c9a0d06a648460e17b48ab4c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x37bf47"]}
Same things happens to me so I used "-r 1" with a reboot. bat and the miner reboots my computer instead of restarting and hanging. Mind to share your reboot.bat file ? And- I had same "incorrect temp 511" log, riser was burning @ molex, yellow (12V ) pin... Your cards are overburdened. It is on the OP under the -r option. Claymore tells you what to put in the reboot.bat to execute a reboot. Just go to page 1 and the first post and look for it. so your reboot.bat contains "shutdown /r /t 5 /f" ? Because that is where you pointed me. See, I try to be helpful sharing my experience with you. From other side you tell me to read OP? Next time you ask for advice/help I will point you to page 1. @PPOC: Temps? Temp runs 88-92, warmer then I'd like but don't think it throttles till 95. Suprised on the temp with an EK block on it with a 3 fan Rad. |
BTC: 1Bo6YsPeHCrVRygHLJg9BwHeaLSQpppcJi
"Lost coins only make everyone else’s coins worth slightly more. Think of it as a donation to everyone."
|
|
|
|
sundownz
|
|
May 05, 2017, 05:53:51 PM |
|
I got the dual mining working via Nicehash.
I tried LBRY and also PASCAL but both of them slowed down my ETH mining substantially... by about 6 MH/s for either of them.
I also tried DCR and it doesn't show any speed penalty... but is having 100% rejection rate.
Ideas on that ?
What version of the miner are you using? For DCR you can only use 9.2 and 9.3 due to header change. Earlier versions will only create invalid shares. Okay that must be it -- I have an older version. |
|
|
|
AzzAz
Legendary
Offline
Activity: 1030
Merit: 1006
|
|
May 05, 2017, 06:03:47 PM |
|
I seem to have an issue, well two issues. #1 the miner crashes/freezes after it exits or the watchdog restarts it and I can't figure out why. #2 here's a the log file of the GPUs halting and the miner restarting. Why did the GPUs stop, I can't figure out why? It crashed/froze after it restarted and I lost many hours of mining time. 00:23:58:748 3cff9700 parse packet: 236
00:23:58:748 3cff9700 ETH: job changed
00:23:58:748 3cff9700 new buf size: 0
00:23:58:748 3cff9700 ETH: 05/05/17-00:23:58 - New job from musicoin.nomnom.technology:9999
00:23:58:748 3cff9700 target: 0x0000000225c17d04 (diff: 2000MH), epoch #13
00:23:58:748 3cff9700 ETH - Total Speed: 98.703 Mh/s, Total Shares: 1080, Rejected: 2, Time: 06:02
00:23:58:748 3cff9700 ETH: GPU0 15.153 Mh/s, GPU1 19.916 Mh/s, GPU2 21.565 Mh/s, GPU3 21.514 Mh/s, GPU4 20.555 Mh/s
00:23:58:748 3cff9700 DCR - Total Speed: 5922.173 Mh/s, Total Shares: 1150, Rejected: 3
00:23:58:748 3cff9700 DCR: GPU0 909.169 Mh/s, GPU1 1194.958 Mh/s, GPU2 1293.899 Mh/s, GPU3 1290.819 Mh/s, GPU4 1233.328 Mh/s
00:23:58:888 68a84740 GPU0 t=62C fan=90%, GPU1 t=63C fan=84%, GPU2 t=61C fan=43%, GPU3 t=59C fan=40%, GPU4 t=62C fan=40%
00:23:58:888 68a84740 em hbt: 1, dm hbt: 1, fm hbt: 1,
00:23:58:888 68a84740 watchdog - thread 0, hb time 2758
00:23:58:888 68a84740 watchdog - thread 1, hb time 2794
00:23:58:888 68a84740 watchdog - thread 2, hb time 2801
00:23:58:888 68a84740 watchdog - thread 3, hb time 2775
00:23:58:889 68a84740 watchdog - thread 4, hb time 2775
00:23:58:889 68a84740 watchdog - thread 5, hb time 2799
00:23:58:889 68a84740 watchdog - thread 6, hb time 2771
00:23:58:889 68a84740 watchdog - thread 7, hb time 2796
00:23:58:889 68a84740 watchdog - thread 8, hb time 2809
00:23:58:889 68a84740 watchdog - thread 9, hb time 2783
00:23:59:318 3cff9700 ETH: checking pool connection...
00:23:59:318 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
00:23:59:352 3cff9700 got 237 bytes
00:23:59:352 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}
00:23:59:352 3cff9700 parse packet: 236
00:23:59:352 3cff9700 ETH: job is the same
00:23:59:352 3cff9700 new buf size: 0
00:24:03:769 3dffb700 GPU4 DAG creation time - 5018 ms
00:24:03:769 3dffb700 Setting DAG epoch #121 for GPU4 done
00:24:03:769 3dffb700 DevFee: restart timer because of updating DAG
00:24:03:769 5544e700 Setting DAG epoch #121 for GPU1
00:24:07:855 3cff9700 send: {"id":6,"worker":"linux","jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x139a9fb", "0x000000000000000000000000000000000000000000000000000000003a79d94e"]}
00:24:07:889 3cff9700 got 39 bytes
00:24:07:889 3cff9700 buf: {"id":6,"jsonrpc":"2.0","result":true}
00:24:07:889 3cff9700 parse packet: 38
00:24:07:889 3cff9700 new buf size: 0
00:24:08:763 5544e700 GPU1 DAG creation time - 4894 ms
00:24:08:763 5544e700 Setting DAG epoch #121 for GPU1 done
00:24:08:763 5544e700 DevFee: restart timer because of updating DAG
00:24:08:763 3f7fe700 Setting DAG epoch #121 for GPU2
00:24:09:319 3cff9700 ETH: checking pool connection...
00:24:09:319 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
00:24:09:354 3cff9700 got 237 bytes
00:24:09:354 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}
00:24:09:354 3cff9700 parse packet: 236
00:24:09:354 3cff9700 ETH: job is the same
00:24:09:354 3cff9700 new buf size: 0
00:24:10:864 5544e700 ETH: put share nonce 289644a40270f06d
00:24:10:864 5544e700 DevFee: ETH round found 1 shares
00:24:10:864 3bff7700 DevFee: ETH: 05/05/17-00:24:10 - SHARE FOUND - (GPU 1)
00:24:10:864 3bff7700 send: {"id":4,"method":"eth_submitWork","params":["0x289644a40270f06d","0xd3fceb4972e2bb316d331c1ac07c817488888b6fbea6fca37f6bcce90a169121","0x479ed8ffc20b8e8989ea6ac9dd0d411f394bd07777174f2c774a65a4d2f5a815"]}
00:24:10:961 3bff7700 got 39 bytes
00:24:10:961 3bff7700 buf: {"id":4,"jsonrpc":"2.0","result":true}
00:24:10:961 3bff7700 parse packet: 38
00:24:10:961 3bff7700 ETH: Share accepted (96 ms)!
00:24:10:961 3bff7700 new buf size: 0
00:24:10:980 3bff7700 got 248 bytes
00:24:10:980 3bff7700 buf: {"id":0,"jsonrpc":"2.0","result":["0x2cf04207cd9afbc1e426cda6b5e286ca84d6986fe0f5aa063a7d398af9b661b5","0x064ef82d7269405eb06162f7d33f2b6aa2a23741c9a0d06a648460e17b48ab4c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x37bf46"]}
00:24:10:980 3bff7700 parse packet: 247
00:24:10:980 3bff7700 ETH: job changed
00:24:10:980 3bff7700 new buf size: 0
00:24:10:980 3bff7700 DevFee: ETH: 05/05/17-00:24:10 - New job from us1.ethpool.org:3333
00:24:10:980 3bff7700 target: 0x0000000112e0be82
00:24:13:879 3f7fe700 GPU2 DAG creation time - 5017 ms
00:24:13:879 3f7fe700 Setting DAG epoch #121 for GPU2 done
00:24:13:879 3f7fe700 DevFee: restart timer because of updating DAG
00:24:13:879 3e7fc700 Setting DAG epoch #121 for GPU3
00:24:16:907 68a84740 Got incorrect temperature 511, ignore
00:24:16:907 68a84740 Got incorrect temperature 511, ignore
00:24:16:907 68a84740 Got incorrect temperature 511, ignore
00:24:16:908 68a84740 Got incorrect temperature 511, ignore
00:24:19:321 3cff9700 ETH: checking pool connection...
00:24:19:321 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
00:24:19:357 3cff9700 got 237 bytes
00:24:19:357 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}
00:24:19:357 3cff9700 parse packet: 236
00:24:19:357 3cff9700 ETH: job is the same
00:24:19:357 3cff9700 new buf size: 0
00:24:19:494 3cff9700 got 237 bytes
00:24:19:495 3cff9700 buf: {"id":0,"jsonrpc":"2.0","result":["0x3c2c66c4303add4353de34af2e76d112c2907f95e17ebd94372d57484596e0e4","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}
00:24:19:495 3cff9700 parse packet: 236
00:24:19:495 3cff9700 ETH: job changed
00:24:19:495 3cff9700 new buf size: 0
00:24:19:495 3cff9700 ETH: 05/05/17-00:24:19 - New job from musicoin.nomnom.technology:9999
00:24:19:495 3cff9700 target: 0x0000000225c17d04 (diff: 2000MH), epoch #13
00:24:19:495 3cff9700 ETH - Total Speed: 0.000 Mh/s, Total Shares: 1080, Rejected: 2, Time: 06:03
00:24:19:495 3cff9700 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
00:24:19:495 3cff9700 DCR - Total Speed: 0.000 Mh/s, Total Shares: 1150, Rejected: 3
00:24:19:495 3cff9700 DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
00:24:19:910 68a84740 Got incorrect temperature 511, ignore
00:24:19:910 68a84740 Got incorrect temperature 511, ignore
00:24:19:910 68a84740 Got incorrect temperature 511, ignore
00:24:19:910 68a84740 Got incorrect temperature 511, ignore
00:24:20:012 3bff7700 got 248 bytes
00:24:20:012 3bff7700 buf: {"id":0,"jsonrpc":"2.0","result":["0xe22b4abeb25b318936269369f09a2b7f3fee6ab4d84512e5d2490fc7444e1e5d","0x064ef82d7269405eb06162f7d33f2b6aa2a23741c9a0d06a648460e17b48ab4c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x37bf47"]}
Same things happens to me so I used "-r 1" with a reboot. bat and the miner reboots my computer instead of restarting and hanging. Mind to share your reboot.bat file ? And- I had same "incorrect temp 511" log, riser was burning @ molex, yellow (12V ) pin... Your cards are overburdened. It is on the OP under the -r option. Claymore tells you what to put in the reboot.bat to execute a reboot. Just go to page 1 and the first post and look for it. so your reboot.bat contains "shutdown /r /t 5 /f" ? Because that is where you pointed me. See, I try to be helpful sharing my experience with you. From other side you tell me to read OP? Next time you ask for advice/help I will point you to page 1. @PPOC: Temps? Temp runs 88-92, warmer then I'd like but don't think it throttles till 95. Suprised on the temp with an EK block on it with a 3 fan Rad. Don't let them go over 70s. Get some serious cooling if you want to mine. Ditch the case. |
|
|
|
|
|
sundownz
|
|
May 05, 2017, 06:05:48 PM |
|
I got the dual mining working via Nicehash.
I tried LBRY and also PASCAL but both of them slowed down my ETH mining substantially... by about 6 MH/s for either of them.
I also tried DCR and it doesn't show any speed penalty... but is having 100% rejection rate.
Ideas on that ?
What version of the miner are you using? For DCR you can only use 9.2 and 9.3 due to header change. Earlier versions will only create invalid shares. Okay that must be it -- I have an older version. Yep... exactly it. I updated the miner in my Nicehash folder and Decred works now. Thanks! |
|
|
|
eth4lyfe
Newbie
Offline
Activity: 70
Merit: 0
|
|
May 05, 2017, 06:18:07 PM |
|
I seem to have an issue, well two issues. #1 the miner crashes/freezes after it exits or the watchdog restarts it and I can't figure out why. #2 here's a the log file of the GPUs halting and the miner restarting. Why did the GPUs stop, I can't figure out why? It crashed/froze after it restarted and I lost many hours of mining time. 00:23:58:748 3cff9700 parse packet: 236
00:23:58:748 3cff9700 ETH: job changed
00:23:58:748 3cff9700 new buf size: 0
00:23:58:748 3cff9700 ETH: 05/05/17-00:23:58 - New job from musicoin.nomnom.technology:9999
00:23:58:748 3cff9700 target: 0x0000000225c17d04 (diff: 2000MH), epoch #13
00:23:58:748 3cff9700 ETH - Total Speed: 98.703 Mh/s, Total Shares: 1080, Rejected: 2, Time: 06:02
00:23:58:748 3cff9700 ETH: GPU0 15.153 Mh/s, GPU1 19.916 Mh/s, GPU2 21.565 Mh/s, GPU3 21.514 Mh/s, GPU4 20.555 Mh/s
00:23:58:748 3cff9700 DCR - Total Speed: 5922.173 Mh/s, Total Shares: 1150, Rejected: 3
00:23:58:748 3cff9700 DCR: GPU0 909.169 Mh/s, GPU1 1194.958 Mh/s, GPU2 1293.899 Mh/s, GPU3 1290.819 Mh/s, GPU4 1233.328 Mh/s
00:23:58:888 68a84740 GPU0 t=62C fan=90%, GPU1 t=63C fan=84%, GPU2 t=61C fan=43%, GPU3 t=59C fan=40%, GPU4 t=62C fan=40%
00:23:58:888 68a84740 em hbt: 1, dm hbt: 1, fm hbt: 1,
00:23:58:888 68a84740 watchdog - thread 0, hb time 2758
00:23:58:888 68a84740 watchdog - thread 1, hb time 2794
00:23:58:888 68a84740 watchdog - thread 2, hb time 2801
00:23:58:888 68a84740 watchdog - thread 3, hb time 2775
00:23:58:889 68a84740 watchdog - thread 4, hb time 2775
00:23:58:889 68a84740 watchdog - thread 5, hb time 2799
00:23:58:889 68a84740 watchdog - thread 6, hb time 2771
00:23:58:889 68a84740 watchdog - thread 7, hb time 2796
00:23:58:889 68a84740 watchdog - thread 8, hb time 2809
00:23:58:889 68a84740 watchdog - thread 9, hb time 2783
00:23:59:318 3cff9700 ETH: checking pool connection...
00:23:59:318 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
00:23:59:352 3cff9700 got 237 bytes
00:23:59:352 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}
00:23:59:352 3cff9700 parse packet: 236
00:23:59:352 3cff9700 ETH: job is the same
00:23:59:352 3cff9700 new buf size: 0
00:24:03:769 3dffb700 GPU4 DAG creation time - 5018 ms
00:24:03:769 3dffb700 Setting DAG epoch #121 for GPU4 done
00:24:03:769 3dffb700 DevFee: restart timer because of updating DAG
00:24:03:769 5544e700 Setting DAG epoch #121 for GPU1
00:24:07:855 3cff9700 send: {"id":6,"worker":"linux","jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x139a9fb", "0x000000000000000000000000000000000000000000000000000000003a79d94e"]}
00:24:07:889 3cff9700 got 39 bytes
00:24:07:889 3cff9700 buf: {"id":6,"jsonrpc":"2.0","result":true}
00:24:07:889 3cff9700 parse packet: 38
00:24:07:889 3cff9700 new buf size: 0
00:24:08:763 5544e700 GPU1 DAG creation time - 4894 ms
00:24:08:763 5544e700 Setting DAG epoch #121 for GPU1 done
00:24:08:763 5544e700 DevFee: restart timer because of updating DAG
00:24:08:763 3f7fe700 Setting DAG epoch #121 for GPU2
00:24:09:319 3cff9700 ETH: checking pool connection...
00:24:09:319 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
00:24:09:354 3cff9700 got 237 bytes
00:24:09:354 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}
00:24:09:354 3cff9700 parse packet: 236
00:24:09:354 3cff9700 ETH: job is the same
00:24:09:354 3cff9700 new buf size: 0
00:24:10:864 5544e700 ETH: put share nonce 289644a40270f06d
00:24:10:864 5544e700 DevFee: ETH round found 1 shares
00:24:10:864 3bff7700 DevFee: ETH: 05/05/17-00:24:10 - SHARE FOUND - (GPU 1)
00:24:10:864 3bff7700 send: {"id":4,"method":"eth_submitWork","params":["0x289644a40270f06d","0xd3fceb4972e2bb316d331c1ac07c817488888b6fbea6fca37f6bcce90a169121","0x479ed8ffc20b8e8989ea6ac9dd0d411f394bd07777174f2c774a65a4d2f5a815"]}
00:24:10:961 3bff7700 got 39 bytes
00:24:10:961 3bff7700 buf: {"id":4,"jsonrpc":"2.0","result":true}
00:24:10:961 3bff7700 parse packet: 38
00:24:10:961 3bff7700 ETH: Share accepted (96 ms)!
00:24:10:961 3bff7700 new buf size: 0
00:24:10:980 3bff7700 got 248 bytes
00:24:10:980 3bff7700 buf: {"id":0,"jsonrpc":"2.0","result":["0x2cf04207cd9afbc1e426cda6b5e286ca84d6986fe0f5aa063a7d398af9b661b5","0x064ef82d7269405eb06162f7d33f2b6aa2a23741c9a0d06a648460e17b48ab4c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x37bf46"]}
00:24:10:980 3bff7700 parse packet: 247
00:24:10:980 3bff7700 ETH: job changed
00:24:10:980 3bff7700 new buf size: 0
00:24:10:980 3bff7700 DevFee: ETH: 05/05/17-00:24:10 - New job from us1.ethpool.org:3333
00:24:10:980 3bff7700 target: 0x0000000112e0be82
00:24:13:879 3f7fe700 GPU2 DAG creation time - 5017 ms
00:24:13:879 3f7fe700 Setting DAG epoch #121 for GPU2 done
00:24:13:879 3f7fe700 DevFee: restart timer because of updating DAG
00:24:13:879 3e7fc700 Setting DAG epoch #121 for GPU3
00:24:16:907 68a84740 Got incorrect temperature 511, ignore
00:24:16:907 68a84740 Got incorrect temperature 511, ignore
00:24:16:907 68a84740 Got incorrect temperature 511, ignore
00:24:16:908 68a84740 Got incorrect temperature 511, ignore
00:24:19:321 3cff9700 ETH: checking pool connection...
00:24:19:321 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
00:24:19:357 3cff9700 got 237 bytes
00:24:19:357 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}
00:24:19:357 3cff9700 parse packet: 236
00:24:19:357 3cff9700 ETH: job is the same
00:24:19:357 3cff9700 new buf size: 0
00:24:19:494 3cff9700 got 237 bytes
00:24:19:495 3cff9700 buf: {"id":0,"jsonrpc":"2.0","result":["0x3c2c66c4303add4353de34af2e76d112c2907f95e17ebd94372d57484596e0e4","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}
00:24:19:495 3cff9700 parse packet: 236
00:24:19:495 3cff9700 ETH: job changed
00:24:19:495 3cff9700 new buf size: 0
00:24:19:495 3cff9700 ETH: 05/05/17-00:24:19 - New job from musicoin.nomnom.technology:9999
00:24:19:495 3cff9700 target: 0x0000000225c17d04 (diff: 2000MH), epoch #13
00:24:19:495 3cff9700 ETH - Total Speed: 0.000 Mh/s, Total Shares: 1080, Rejected: 2, Time: 06:03
00:24:19:495 3cff9700 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
00:24:19:495 3cff9700 DCR - Total Speed: 0.000 Mh/s, Total Shares: 1150, Rejected: 3
00:24:19:495 3cff9700 DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
00:24:19:910 68a84740 Got incorrect temperature 511, ignore
00:24:19:910 68a84740 Got incorrect temperature 511, ignore
00:24:19:910 68a84740 Got incorrect temperature 511, ignore
00:24:19:910 68a84740 Got incorrect temperature 511, ignore
00:24:20:012 3bff7700 got 248 bytes
00:24:20:012 3bff7700 buf: {"id":0,"jsonrpc":"2.0","result":["0xe22b4abeb25b318936269369f09a2b7f3fee6ab4d84512e5d2490fc7444e1e5d","0x064ef82d7269405eb06162f7d33f2b6aa2a23741c9a0d06a648460e17b48ab4c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x37bf47"]}
Same things happens to me so I used "-r 1" with a reboot. bat and the miner reboots my computer instead of restarting and hanging. Mind to share your reboot.bat file ? And- I had same "incorrect temp 511" log, riser was burning @ molex, yellow (12V ) pin... Your cards are overburdened. It is on the OP under the -r option. Claymore tells you what to put in the reboot.bat to execute a reboot. Just go to page 1 and the first post and look for it. so your reboot.bat contains "shutdown /r /t 5 /f" ? Because that is where you pointed me. See, I try to be helpful sharing my experience with you. From other side you tell me to read OP? Next time you ask for advice/help I will point you to page 1. @PPOC: Temps? Temp runs 88-92, warmer then I'd like but don't think it throttles till 95. Suprised on the temp with an EK block on it with a 3 fan Rad. Don't let them go over 70s. Get some serious cooling if you want to mine. Ditch the case. I set my shutoff temp at 70*C lol, my rigs usually run around 55-60*C and I have an open air setup - http://imgur.com/a/33vZm |
|
|
|
|
|
drrobert
|
|
May 05, 2017, 06:25:16 PM |
|
How to find right gpu with problem?
i have one gpu with problem with overclock #4 (my rig it is with 8 cards) i need to find the right gpu and fix it, there is any hardwareId or something to find it? or also i don't have idea stop fan then will be more easy find it.
|
|
|
|
|
sNaKeyz0r91
Member
Offline
Activity: 131
Merit: 10
|
|
May 05, 2017, 06:41:36 PM |
|
Hi Claymore,
I have this error just before miner restarts. Sometimes after 50+ hours, sometimes after 20-30 hours of mining. I use Nicehash miner.
This is a peak to the log file:
[2017-05-05 20:26:50] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] READ SPEED ZERO, will cool up
[2017-05-05 20:26:50] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Cooling UP, cool time is 10000 ms
[2017-05-05 20:27:00] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] READ SPEED ZERO, will cool up
[2017-05-05 20:27:00] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Cooling UP, cool time is 20000 ms
[2017-05-05 20:27:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] READ SPEED ZERO, will cool up
[2017-05-05 20:27:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Cooling UP, cool time is 40000 ms
[2017-05-05 20:28:00] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] READ SPEED ZERO, will cool up
[2017-05-05 20:28:00] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Cooling UP, cool time is 80000 ms
[2017-05-05 20:28:25] [INFO] [NICEHASH] Balance get
[2017-05-05 20:28:27] [INFO] [NICEHASH] SMA get
[2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] READ SPEED ZERO, will cool up
[2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Cooling UP, cool time is 160000 ms
[2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] MAX cool time exceeded. RESTARTING
[2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Restarting miner..
[2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Shutting down miner
[2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] Trying to kill all miner processes for this instance:
[2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] Nothing to kill [pid(24904)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)], exMsg Process with an Id of 24904 is not running.
[2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] Trying to kill [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)]
[2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] Exception killing [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)], exMsg Access is denied
[2017-05-05 20:29:35] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] Starting miner [pid(32164)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] -di 01 -dcri 20,20 -asm 2,2 -epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal zzzxxxccc -mport 127.0.0.1:4000 -esm 3 -epsw x -allpools 1 -dcoin dcr -dpool stratum+tcp://decred.eu.nicehash.com:3354 -dwal cccxxxzzz -dbg -1
[2017-05-05 20:29:35] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(32164)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Starting cooldown checker
[2017-05-05 20:29:40] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(32164)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Cooling UP, cool time is 10000 ms
[2017-05-05 20:29:40] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] GetSummary exception: No connection could be made because the target machine actively refused it 127.0.0.1:4000
[2017-05-05 20:29:45] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] GetSummary exception: No connection could be made because the target machine actively refused it 127.0.0.1:4000
[2017-05-05 20:29:50] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid
|
|
|
|
|
scryptr
Legendary
Offline
Activity: 1793
Merit: 1028
|
|
May 05, 2017, 07:00:34 PM |
|
I have a spare 6 pin sata port on my EVGA supernova modular PSU. If I buy a 6 pin male to 6 pin male modular cable, can I plug that into my PCIE riser to power it safely?
I really need an answer to this if anybody could help THERE ARE NEW MODEL PCIE RISER CARDS-- These new models have 6-pin female PCIe connectors on the upper component card, with the graphic -card slot. It would be physically possible to use a male-male PSU PCIe cable to power the card, rather than a SATA-to-6-pin PCIe adapter supplied with the riser kit. 1) I don't know the answer. 2) The riser card was not designed that way. 3) You could do ground-breaking research and try it on an old graphics card you no longer need. Be sure to make a video of the process. It may very well work, the new riser cards have over-voltage protection. --scryptr |
|
|
|
|
Elder III
|
|
May 05, 2017, 09:20:29 PM |
|
I seem to have an issue, well two issues. #1 the miner crashes/freezes after it exits or the watchdog restarts it and I can't figure out why. #2 here's a the log file of the GPUs halting and the miner restarting. Why did the GPUs stop, I can't figure out why? It crashed/froze after it restarted and I lost many hours of mining time. 00:23:58:748 3cff9700 parse packet: 236
00:23:58:748 3cff9700 ETH: job changed
00:23:58:748 3cff9700 new buf size: 0
00:23:58:748 3cff9700 ETH: 05/05/17-00:23:58 - New job from musicoin.nomnom.technology:9999
00:23:58:748 3cff9700 target: 0x0000000225c17d04 (diff: 2000MH), epoch #13
00:23:58:748 3cff9700 ETH - Total Speed: 98.703 Mh/s, Total Shares: 1080, Rejected: 2, Time: 06:02
00:23:58:748 3cff9700 ETH: GPU0 15.153 Mh/s, GPU1 19.916 Mh/s, GPU2 21.565 Mh/s, GPU3 21.514 Mh/s, GPU4 20.555 Mh/s
00:23:58:748 3cff9700 DCR - Total Speed: 5922.173 Mh/s, Total Shares: 1150, Rejected: 3
00:23:58:748 3cff9700 DCR: GPU0 909.169 Mh/s, GPU1 1194.958 Mh/s, GPU2 1293.899 Mh/s, GPU3 1290.819 Mh/s, GPU4 1233.328 Mh/s
00:23:58:888 68a84740 GPU0 t=62C fan=90%, GPU1 t=63C fan=84%, GPU2 t=61C fan=43%, GPU3 t=59C fan=40%, GPU4 t=62C fan=40%
00:23:58:888 68a84740 em hbt: 1, dm hbt: 1, fm hbt: 1,
00:23:58:888 68a84740 watchdog - thread 0, hb time 2758
00:23:58:888 68a84740 watchdog - thread 1, hb time 2794
00:23:58:888 68a84740 watchdog - thread 2, hb time 2801
00:23:58:888 68a84740 watchdog - thread 3, hb time 2775
00:23:58:889 68a84740 watchdog - thread 4, hb time 2775
00:23:58:889 68a84740 watchdog - thread 5, hb time 2799
00:23:58:889 68a84740 watchdog - thread 6, hb time 2771
00:23:58:889 68a84740 watchdog - thread 7, hb time 2796
00:23:58:889 68a84740 watchdog - thread 8, hb time 2809
00:23:58:889 68a84740 watchdog - thread 9, hb time 2783
00:23:59:318 3cff9700 ETH: checking pool connection...
00:23:59:318 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
00:23:59:352 3cff9700 got 237 bytes
00:23:59:352 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}
00:23:59:352 3cff9700 parse packet: 236
00:23:59:352 3cff9700 ETH: job is the same
00:23:59:352 3cff9700 new buf size: 0
00:24:03:769 3dffb700 GPU4 DAG creation time - 5018 ms
00:24:03:769 3dffb700 Setting DAG epoch #121 for GPU4 done
00:24:03:769 3dffb700 DevFee: restart timer because of updating DAG
00:24:03:769 5544e700 Setting DAG epoch #121 for GPU1
00:24:07:855 3cff9700 send: {"id":6,"worker":"linux","jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x139a9fb", "0x000000000000000000000000000000000000000000000000000000003a79d94e"]}
00:24:07:889 3cff9700 got 39 bytes
00:24:07:889 3cff9700 buf: {"id":6,"jsonrpc":"2.0","result":true}
00:24:07:889 3cff9700 parse packet: 38
00:24:07:889 3cff9700 new buf size: 0
00:24:08:763 5544e700 GPU1 DAG creation time - 4894 ms
00:24:08:763 5544e700 Setting DAG epoch #121 for GPU1 done
00:24:08:763 5544e700 DevFee: restart timer because of updating DAG
00:24:08:763 3f7fe700 Setting DAG epoch #121 for GPU2
00:24:09:319 3cff9700 ETH: checking pool connection...
00:24:09:319 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
00:24:09:354 3cff9700 got 237 bytes
00:24:09:354 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}
00:24:09:354 3cff9700 parse packet: 236
00:24:09:354 3cff9700 ETH: job is the same
00:24:09:354 3cff9700 new buf size: 0
00:24:10:864 5544e700 ETH: put share nonce 289644a40270f06d
00:24:10:864 5544e700 DevFee: ETH round found 1 shares
00:24:10:864 3bff7700 DevFee: ETH: 05/05/17-00:24:10 - SHARE FOUND - (GPU 1)
00:24:10:864 3bff7700 send: {"id":4,"method":"eth_submitWork","params":["0x289644a40270f06d","0xd3fceb4972e2bb316d331c1ac07c817488888b6fbea6fca37f6bcce90a169121","0x479ed8ffc20b8e8989ea6ac9dd0d411f394bd07777174f2c774a65a4d2f5a815"]}
00:24:10:961 3bff7700 got 39 bytes
00:24:10:961 3bff7700 buf: {"id":4,"jsonrpc":"2.0","result":true}
00:24:10:961 3bff7700 parse packet: 38
00:24:10:961 3bff7700 ETH: Share accepted (96 ms)!
00:24:10:961 3bff7700 new buf size: 0
00:24:10:980 3bff7700 got 248 bytes
00:24:10:980 3bff7700 buf: {"id":0,"jsonrpc":"2.0","result":["0x2cf04207cd9afbc1e426cda6b5e286ca84d6986fe0f5aa063a7d398af9b661b5","0x064ef82d7269405eb06162f7d33f2b6aa2a23741c9a0d06a648460e17b48ab4c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x37bf46"]}
00:24:10:980 3bff7700 parse packet: 247
00:24:10:980 3bff7700 ETH: job changed
00:24:10:980 3bff7700 new buf size: 0
00:24:10:980 3bff7700 DevFee: ETH: 05/05/17-00:24:10 - New job from us1.ethpool.org:3333
00:24:10:980 3bff7700 target: 0x0000000112e0be82
00:24:13:879 3f7fe700 GPU2 DAG creation time - 5017 ms
00:24:13:879 3f7fe700 Setting DAG epoch #121 for GPU2 done
00:24:13:879 3f7fe700 DevFee: restart timer because of updating DAG
00:24:13:879 3e7fc700 Setting DAG epoch #121 for GPU3
00:24:16:907 68a84740 Got incorrect temperature 511, ignore
00:24:16:907 68a84740 Got incorrect temperature 511, ignore
00:24:16:907 68a84740 Got incorrect temperature 511, ignore
00:24:16:908 68a84740 Got incorrect temperature 511, ignore
00:24:19:321 3cff9700 ETH: checking pool connection...
00:24:19:321 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
00:24:19:357 3cff9700 got 237 bytes
00:24:19:357 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}
00:24:19:357 3cff9700 parse packet: 236
00:24:19:357 3cff9700 ETH: job is the same
00:24:19:357 3cff9700 new buf size: 0
00:24:19:494 3cff9700 got 237 bytes
00:24:19:495 3cff9700 buf: {"id":0,"jsonrpc":"2.0","result":["0x3c2c66c4303add4353de34af2e76d112c2907f95e17ebd94372d57484596e0e4","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}
00:24:19:495 3cff9700 parse packet: 236
00:24:19:495 3cff9700 ETH: job changed
00:24:19:495 3cff9700 new buf size: 0
00:24:19:495 3cff9700 ETH: 05/05/17-00:24:19 - New job from musicoin.nomnom.technology:9999
00:24:19:495 3cff9700 target: 0x0000000225c17d04 (diff: 2000MH), epoch #13
00:24:19:495 3cff9700 ETH - Total Speed: 0.000 Mh/s, Total Shares: 1080, Rejected: 2, Time: 06:03
00:24:19:495 3cff9700 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
00:24:19:495 3cff9700 DCR - Total Speed: 0.000 Mh/s, Total Shares: 1150, Rejected: 3
00:24:19:495 3cff9700 DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
00:24:19:910 68a84740 Got incorrect temperature 511, ignore
00:24:19:910 68a84740 Got incorrect temperature 511, ignore
00:24:19:910 68a84740 Got incorrect temperature 511, ignore
00:24:19:910 68a84740 Got incorrect temperature 511, ignore
00:24:20:012 3bff7700 got 248 bytes
00:24:20:012 3bff7700 buf: {"id":0,"jsonrpc":"2.0","result":["0xe22b4abeb25b318936269369f09a2b7f3fee6ab4d84512e5d2490fc7444e1e5d","0x064ef82d7269405eb06162f7d33f2b6aa2a23741c9a0d06a648460e17b48ab4c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x37bf47"]}
Same things happens to me so I used "-r 1" with a reboot. bat and the miner reboots my computer instead of restarting and hanging. Mind to share your reboot.bat file ? And- I had same "incorrect temp 511" log, riser was burning @ molex, yellow (12V ) pin... Your cards are overburdened. It is on the OP under the -r option. Claymore tells you what to put in the reboot.bat to execute a reboot. Just go to page 1 and the first post and look for it. so your reboot.bat contains "shutdown /r /t 5 /f" ? Because that is where you pointed me. See, I try to be helpful sharing my experience with you. From other side you tell me to read OP? Next time you ask for advice/help I will point you to page 1. @PPOC: Temps? Temp runs 88-92, warmer then I'd like but don't think it throttles till 95. Suprised on the temp with an EK block on it with a 3 fan Rad. I'd not bother mining Eth+DCR with a GTX 1080, you will get much better results mining ZCASH on that GPU. ZCASH also runs cooler and uses less power, so that may solve your temperature issue as well as bringing in more $. |
|
|
|
|
miner582
Newbie
Offline
Activity: 41
Merit: 0
|
|
May 06, 2017, 12:41:03 AM |
|
Newbie question, I have several rigs on linux running claymore without any problem, however I just install claymore on my PC and I cannot modify the gpu mem or core voltage on a R9 390 Powercolor 8G but I can OC the core via -cclock. Is this normal? I read on the web that I can change mem and undervolt using MSI AB but my card dont want to take the underclock. I am using Crisom 15.12. In the OP say that AMD block underclocking so that the reason for claymore miner to not accept -mclock but using MSI AB should I can?
Thanks
|
|
|
|
|
jackbox
Legendary
Offline
Activity: 1246
Merit: 1024
|
|
May 06, 2017, 01:29:56 AM |
|
How to find right gpu with problem?
i have one gpu with problem with overclock #4 (my rig it is with 8 cards) i need to find the right gpu and fix it, there is any hardwareId or something to find it? or also i don't have idea stop fan then will be more easy find it.
If you press a number in the command prompt window that GPU will stop mining. For example you press 0 and GPU0 will stop mining. You press 4 and GPU4 will stop mining. If you press the number again the miner will start mining again. So you can press all the numbers and stop them from mining one at a time. Then maybe you can figure out which one has the overclocking issue? |
|
|
|
RonRedactedSwanson
Newbie
Offline
Activity: 1
Merit: 0
|
|
May 06, 2017, 02:21:40 AM
Last edit: May 06, 2017, 04:12:59 AM by RonRedactedSwanson |
|
New to Ether mining (I mine BTC with ASICs) I have tried several mining programs for Ether, including MinerGate, which was the first I tried using, which installed the DAG (I have a feeling this is my issue). Once the DAG was completed it let me use my CPU to mine but not my GPU. When I tried using Claymore, something seemingly similar happens and it gets "hung" on something. Here's a log of how far the miner gets before it gets stuck. Any advice would be greatly appreciated.
21:56:59:179 2240 args: setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 -epool us1.ethpool.org:3333 -ewal 0xaC7f2d537580beC57a90C684159425A462BAfc89 -epsw x -esm 1 -mode 1 -tt 80 -asm 0
21:56:59:182 2240
21:56:59:185 2240 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
21:56:59:187 2240 º Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.3 º
21:56:59:190 2240 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
21:56:59:192 2240
21:56:59:395 2240 ETH: 1 pool is specified
21:56:59:399 2240 Main Ethereum pool is us1.ethpool.org:3333
21:56:59:513 2240 OpenCL platform: AMD Accelerated Parallel Processing
21:56:59:517 2240 OpenCL initializing...
21:56:59:519 2240 AMD Cards available: 2
21:56:59:522 2240 GPU #0: Hawaii, 4096 MB available, 44 compute units
21:56:59:526 2240 GPU #0 recognized as Radeon 290X
21:56:59:529 2240 GPU #1: Hawaii, 4096 MB available, 44 compute units
21:56:59:532 2240 GPU #1 recognized as Radeon 290X
21:56:59:534 2240 POOL/SOLO version
21:56:59:538 2240 b343
21:56:59:540 2240 Platform: Windows
21:56:59:579 2240 start building OpenCL program for GPU 0...
21:56:59:759 2240 done
21:56:59:977 2240 start building OpenCL program for GPU 1...
EDIT: After some more forum searching, people hinted to outdated/missing OpenCL drivers (which I was quite sure I had installed), but after installing several updates and a new package it's now hashing.
|
|
|
|
|
notbatman
Legendary
Offline
Activity: 2212
Merit: 1038
|
|
May 06, 2017, 06:05:39 AM
Last edit: May 06, 2017, 01:06:13 PM by notbatman |
|
I seem to have an issue, well two issues.
#1 the miner crashes/freezes after it exits or the watchdog restarts it and I can't figure out why.
#2 here's a the log file of the GPUs halting and the miner restarting. Why did the GPUs stop, I can't figure out why? It crashed/froze after it restarted and I lost many hours of mining time.
** clip **
Same things happens to me so I used "-r 1" with a reboot. bat and the miner reboots my computer instead of restarting and hanging. I'll give that a try if I can't narrow down the issue, maybe I got a bad riser or the psu is overloaded. Edit: Things going smoothly for a bit now, I believe it was too many risers on one power line. These RX cards draw too much from from the board/riser they need a second pcie connector IMO. Edit2: I can see from the pool it's hung up, guess it's not the riser power. OMG this is going to take hours to figure out... |
|
|
|
|
|
