Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Pennywis3]

I am successfully mining ETH to ethmine and SC to nicehash's new pool.

Note that I had to specify -dcri 17 to get the ETH mining back up to speed (176Mh/s)

YMMV, but the default of 30 is too high for me.

Current SC rate is about 3000M/s.

Code:

-r 1 
-retrydelay 5
-epool us1.ethermine.org:4444 
-esm 1 
-ewal 0xxxxxxxxxxxxxxxxxxxxxxxxx
-epsw x 
-dpool stratum+tcp://sia.usa.nicehash.com:3360 
-dwal 1xxxxxxxxxxxxxxxxxxxxxxxxx
-dpsw x
-dcoin sc
-tt 75,70,75,75,70,75
-fanmax 85,90,85,85,90,85
-fanmin 50,65,50,50,65,50
-dcri 17

Same here, ETH+SIA working on Nicehash now. Reduced -dcri to 18 to get optimal speed.

No XN.sub though.

[Metroid]

@Claymore, ethman's new version is having a problem and that is, after a minute or so the miner disappear and I wonder why, on the last version was okay.

Edit: After few tests on another computer, it looks like the new version has been okay so far. Let's see how it goes.

[zorvalth]

.

[bisba]

hey guys

can someone help me to improve my .bat file for better performance?-dcri -eth and all that stuff?

im mining with a single rx 480 8g

my bat is this


EthDcrMiner64.exe -epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal 1Eif3QZGmvZSdUdzMs7Cd39wEGy2moWUTx -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://decred.eu.nicehash.com:3354 -dwal 1Eif3QZGmvZSdUdzMs7Cd39wEGy2moWUTx

anybody?

[Claymore]

How does -mpsw works? I thought it should be -mpsw password and then set it in the remote manager , but its not like that..

Exactly, set "-mpsw xxxxx" in miner, then set same password in EthMan in the miner properties, that is all.

[premiero]

@Claymore - why if I start miner through PSTools, I have no GPU temperature/fan monitoring at EthMan?

[zorvalth]

How does -mpsw works? I thought it should be -mpsw password and then set it in the remote manager , but its not like that..

Exactly, set "-mpsw xxxxx" in miner, then set same password in EthMan in the miner properties, that is all.

Yep the problem was i didnt set it in ethman.

Another question, I setn gmail smtp and i get "Could not load SSL library", any fix?

[Andrey123]

Guys, but how to set up a miner for the production of the ether classic?
And which pool is better?
AMD cards

[grobuzga]

Hello there!
I just started using Claymore miner v9.4 with nicehash for Ethash+Siacoin mining. I noticed, that in this mode nicehash web interface says, that extranonce.subscribe is not used, therefore mining performance is degraded. Is there any way to enable xnsub with this miner for siacoin?

[Maticul]

Guys, but how to set up a miner for the production of the ether classic?
And which pool is better?
AMD cards

fly pool is good.

[zenhaeus]

Hello,

I'm trying to dualmine Ethereum and Siacoin on my GTX 970. It seems to work on the Siacoin side of things, and according to the output it also mines Ethereum, but my Ethereum pool does not see my worker. I let it run for quite some time but it does not show up.

Here is my start.bash configuration:
./ethdcrminer64 -epool stratum+tcp://eu.alpereum.ch:3002 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x -eworker rig1 -dpool stratum+tcp://sia-eu1.nanopool.org:7777 -dwal 5c7fb8123b35f1bb82d5123598c9b13ee9408f6b39c0b6ffba05038800ce156db9743becd18a/rig1/my@email.com -dpsw x -dcoin sia -allpools 1

.
.
.

Try:

-dcoin sc

Thanks for the help I guess, but as I said, it mines the Siacoins fine, they show up in my pool and everything is great, but the ether is not showing up, my ether pool does not seem to recognize that I am mining ether.

[Nokia555]

I have developed a miner monitoring for Claymore's Dual etherum miners with SMS support.

If anybody interested for beta testing, let me know.

Some pictures of the system:

[ManyMan]

How does -mpsw works? I thought it should be -mpsw password and then set it in the remote manager , but its not like that..

Exactly, set "-mpsw xxxxx" in miner, then set same password in EthMan in the miner properties, that is all.

Yep the problem was i didnt set it in ethman.

Another question, I setn gmail smtp and i get "Could not load SSL library", any fix?

Yes, same problem.

[PabloW]

Hello! I'm trying to mine with my MSI 6850. Is this card supported with this miner? if not, is there any other miner I could use?
I already downloaded the catalyst update and updated my drivers, so that should be fine.

This is the error I am getting:



Also when I put these in the config file, the miner doesn't load it. Should I put these anywhere else? i also tried putting setx before all of these.

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

This is how my config.txt looks like:

-epool eth.suprnova.cc:5005
-ewal pablow.placa6850
-epsw X
-dpool dcr.suprnova.cc:3252
-dwal pablow.placa6850
-dpsw X
-allpools 1
#-esm 1
#-mode 0
#-tt 70
#-asm 0



I'll appreciate any help you can give me!

Thanks

[wtfonly16]

works up until the moment i unplug monitor, any fix ?

[miner417]

Hello! I'm trying to mine with my MSI 6850. Is this card supported with this miner? if not, is there any other miner I could use?
I already downloaded the catalyst update and updated my drivers, so that should be fine.

This is the error I am getting:



Also when I put these in the config file, the miner doesn't load it. Should I put these anywhere else? i also tried putting setx before all of these.

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

This is how my config.txt looks like:

-epool eth.suprnova.cc:5005
-ewal pablow.placa6850
-epsw X
-dpool dcr.suprnova.cc:3252
-dwal pablow.placa6850
-dpsw X
-allpools 1
#-esm 1
#-mode 0
#-tt 70
#-asm 0



I'll appreciate any help you can give me!

Thanks

To mine eth you need at least 3 GB of ram on the card. That card can't mine eth at all.

[OverEasy]

I am getting errors on all rigs when mining SIA on Nicehash with new Claymore 9.4
Every few minutes I get the following error


This is my .bat file (address removed)


setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100



EthDcrMiner64.exe -dcoin sia -dcri 13 -dbg -1 -epool stratum+tcp://daggerhashimoto.usa.nicehash.com:3353 -ewal someaddress.rig1 -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://sia.usa.nicehash.com:3360 -dwal someaddress.rig1

Any help is appreciated.Thanks

[Shnikes101]

Looking for some guidance. Was running fine for a week and started having issues.

It appears I can't hold a connection to either the servers or the stratum? It will bounce around servers looking for a stable connection but constantly drop. The gpu's run and my hash rate is about what I would expect.

Types of error seen:

ETH: Connection lost, retry in 20 sec...
Cannot resolve eth-us-east1.nanopool.org
ETH: Stratum - Cannot connect to eth-us-esat1.nanopoool.org:9999
ETH : Stratum - Failed to connect, retry in 20 sec...
Socket was closed remotely (by pool)
ETH: Connection lost, retry in 20 sec...
ETH: Received Error :{"jsonrpc" : "2.0", "id" :4, "error" : {"code" ; -32700, "message" : "Worknotfound"}}

The last one feels odd?> Any thoughts?

I do have another miner that uses the same settings and runs fine.

[alnemer]

I have developed a miner monitoring for Claymore's Dual etherum miners with SMS support.

If anybody interested for beta testing, let me know.

Some pictures of the system:

https://www.upload.ee/image/7044728/miners_list.png
https://www.upload.ee/image/7044734/notification_list.png
https://www.upload.ee/image/7044730/ethMonitor.png

It`s great

this bet way for monitoring my rigs

How can I test it?

[PabloW]

Hello! I'm trying to mine with my MSI 6850. Is this card supported with this miner? if not, is there any other miner I could use?
I already downloaded the catalyst update and updated my drivers, so that should be fine.

This is the error I am getting:

[ximg]https://i.imgur.com/6yMwR8P.png[/ximg]

Also when I put these in the config file, the miner doesn't load it. Should I put these anywhere else? i also tried putting setx before all of these.

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

This is how my config.txt looks like:

-epool eth.suprnova.cc:5005
-ewal pablow.placa6850
-epsw X
-dpool dcr.suprnova.cc:3252
-dwal pablow.placa6850
-dpsw X
-allpools 1
#-esm 1
#-mode 0
#-tt 70
#-asm 0



I'll appreciate any help you can give me!

Thanks

To mine eth you need at least 3 GB of ram on the card. That card can't mine eth at all.

Ok thank you!

I want to buy 2 or 3 cards to mine on my own pc. I see everyones buying AMD 470 4GB cards, but I would like something more powerfull since I'm not buying 5 or 6 cards. Would you recommend anything specific?

Thanks again!