Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[nedrah]

I tested with the firewall off, I turned defender off and no anti-virus.

[1715650944]

1715650944

[1715650944]

1715650944

[1715650944]

1715650944

[LarryL]

is there an alternative to nicehash, to send my decred hashrate to, and get payed directly in btc? just with less fees .

[delle54]

is there an alternative to nicehash...

Yes. Mining directly to a pool. If you are too lazy to convert your altcoins to BTC by yourself, you will mostly get less due to the fees at nicehash.

[nedrah]

Solved.  Called the ISP and they ran a tracert and sprint was having problems and it was in the hop.  I went to get pizza and a beer.. Came back and they all are hashing after 12 hours of downtime. I should of just waited it out

[foxbate]

I would like to hear experiences  from the people who are using RX 580 cards regarding power consumption.
 I'v made some tests and i was quite surprised to see that they are drawing much more power than RX 480 series.
Cards which I used in this test are Sapphire RX 580 Nitro Pulse (4GB). I got following results measured on the wall:
All tests are done with cor  1180 mem 2020
For this test I'v used  Asrock Pro BTC 2.0 with Celeron CPU and 4 GB RAM on ethos with Enermax Platimax 1700 PSU.
Claymore 9.3
ETH only  = 1200 W
ETH+ DCR (ASM 0) = 1487 W
ETH +DCR (ASM 1) = 1540 W

Just for comparison same motherboard and PSU with RX 480 Nitro OC + (8GB)
ETH only = 998 W
ETH +DCR (ASM 0) = 1150 W
ETH + DCR (ASM 1) = 1200 W
Hashrate for both 480 and 580 is almost the same or withing 2% range (statistical error) in favor of 580.
All this leads me to the conclusion that 580 card are wasting around 20% more power than 480 series.
Also with undervolting cards for 75mV I was able to reduce power usage of whole rig for about 40W.
Can someone confirm my measurements and compare them with theirs.

[WhyMe]

I would like to hear experiences  from the people who are using RX 580 cards regarding power consumption.
 I'v made some tests and i was quite surprised to see that they are drawing much more power than RX 480 series.
Cards which I used in this test are Sapphire RX 580 Nitro Pulse (4GB). I got following results measured on the wall:
All tests are done with cor  1180 mem 2020
For this test I'v used  Asrock Pro BTC 2.0 with Celeron CPU and 4 GB RAM on ethos with Enermax Platimax 1700 PSU.
Claymore 9.3
ETH only  = 1200 W
ETH+ DCR (ASM 0) = 1487 W
ETH +DCR (ASM 1) = 1540 W

Just for comparison same motherboard and PSU with RX 480 Nitro OC + (8GB)
ETH only = 998 W
ETH +DCR (ASM 0) = 1150 W
ETH + DCR (ASM 1) = 1200 W
Hashrate for both 480 and 580 is almost the same or withing 2% range (statistical error) in favor of 580.
All this leads me to the conclusion that 580 card are wasting around 20% more power than 480 series.
Also with undervolting cards for 75mV I was able to reduce power usage of whole rig for about 40W.
Can someone confirm my measurements and compare them with theirs.

What is real core voltage value ? Offset is not indicating real value

[almirfiorio]

Friends, how can I make claymre run a bat file in case any video card crashes?

Thanks
Almir

[xTommYx]

Hey guys i have the same problem of one of GPU drops to 0.0Mhs and error comes GPU HANGS IN OPENCL call.

Let me tell you what i have tried to far.

Windows 10 - Both uefi and legacy
Tested all Claymore 6.4 to 9.3
Changed mobo from MSI z270 sli plus to Asus gaming pro z270
Changed risers v006a to v006c (molex powered to pcie powered risers)
Tried amd crimson 16.3 - 16.7 - 16.9.2 - 16.11 and even 17.2.1 - 17.4.3 using DDU
Virtual memory 16gb 32gb 40gb
even shorting the x1 pci pins
changing bios settings x16 gen1 or gen2 and to x1
used stock bios and modded bios, over voltage over power anything...
I have tried almost everything.

I am arrived to the point that its either bad GPU chips or bad mobos.

Waiting for a more reliable mobo like asrock pro btc or tb85 etc
After that, i'll sell these shitty rx 480 sapphire nitro +

If someone have found a solution to this OPENCL Hangout error, please post it here or make a new thread.

My conclusion so far is bad mobo or bad gpus. It's hardware issue.

Newbie here.  Any help appreciated.

Setting up my rig.  This worked yesterday for a 36 hour run

      - MSI Z170A Gaming M7
      - 1x Sapphire Nitro (no plus) 8G RX480  (rookie mistake slower memory)
      - 1x Asus Dual RX 480 8G
          BOTH GPUs mounted on mobo
      - windows 7 64bit
      - Claymore v 9.3
      - crimson v 17.4.3
      - firewall off


My config:

-epool USEast.Alpereum.ch:3002
-ewal (xxxxx)
-epsw x
-mode 1
-ethi 16
-tt 85
-asm 0
-wd 2
-benchmark
-fanmin 70

Ran great.  Just going for stability, not speed yet.  Both cards hashed around 24-25Mh/s

------------
Today the risers arrived. (MintCell v006)

Moved the the ASUS DUAL card to the riser.  Added a second ASUS DUAL card with riser.  Sapphire remained on mobo in PCIe slot.

Started Claymore.  All cards hashing about 24-25Mh/s

After 3 minutes of mining ATI driver crash.  One mining card stops mining.

Reboot.  Same behavior.

---------
Read the forums.  Tried to back off to the suggested v15.2 driver, but it would not run with my RX 480.  Settled on driver 16.11.5

Same behavior.

----------

Ran the rig with the Sapphire mounted in case and only 1 ASUS on riser.   This was stable.

-----------

Any ideas?  I have swapped risers to no avail.  I can run 2 cards stable, but adding the third causes a crash a few minutes into mining.

At the time of the crashes no cards are running super hot.  (60-70 C)

Thanks

To reduce variables I placed the two ASUS cards in the PCI-e slots on the mobo.  Tested it and had no problems.  This ruled out any bad cards.

Placed the cards BOTH on risers (no card on the mobo directly) and it failed within a few minutes of load.   Bad risers.

Anyone have a suggestion on good quality risers?

The powered risers are usually good.

I have bought 240 risers and had 2 bad in the bunch.  I have bought half of them from MintCell with no issues.  If your board has a Gen1 or Gen2 setting, try that, and make sure you turn off the PCIe power saver feature under your power options.

Hello mining community,

I would like to ask for some help. Recently bought a mining rig 6x RX 480

https://www.mindfactory.de/product_info.php/8GB-PowerColor-Radeon-RX-480-Red-Dragon-Aktiv-PCIe-3-0-x16--Retail-_1124443.html

I am using Biostar TB85 motherboard, 12 GB RAM, EVGA 1300w, 120ssd, intel celeron 2x2.8GHz, windows 10 64.


I have this problem. On minute after I start claymore miner hashrate on one card drop to 0 and I get report - GPU hangs in opencl call - Need to restart miner.

I am searching for solution for couple of days already.

- I tried different GPU drivers, if I try to install 17.3 or 17.4 crimson computer crash.

- Virtual memory is on 16GB.

- If I start a miner without this card which lost hashrate then same thing happen to other 5 cards, hashrate drop to 0 on all 5 cards.

- I reinstall windows and all drivers, still same issue

- I switch cables and cards, nothing positive happen.

- tried other miners, pools, old version of claymore miner..

- tried function -gser -eser

Tried probly everything i could find on google, still no solution. Not sure if that is specific problem of motherboard, graphic card? other parts are more or less standard mining parts and probly have nothing to do with that problem.

Hop someone can help or give any proposition what should I do or try.

Thank you

Best regards

It is because you did not set your virtual memory. Go into system, advanced settings and change virtual memory to 16000MB like the program tells you to do if you are mining on multiple cards. If you don't do that you get the Open CL hang error, the miner tries to restarts and it just hangs.

Since yesterday I started to get also hang on OpenCL. And I have set virtual memory to 32000MB, so it should be far enough. Have no idea what is causing it. I am trying now the problematic GPU to run on higher stock voltages on core and mem to see if it helps.

I am slowly trying to build a multi GPU ETH/DEC mining rig. I have my second RX 480 card in it and after adding the second card I get an OPEN CL hang error and one of the GPU idles down to a memory clock of 300 MHz and stops mining. I have added the flag and bat file for an automatic reboot but I would prefer to have this not happen at all. I downgraded drivers and it happens less often but it still happens. I set virtual memory to 24000MB. What types of things will cause this to happen and how can I prevent it in the future?

[Icon]

is there an alternative to nicehash, to send my decred hashrate to, and get payed directly in btc? just with less fees .

I don't think nicehash charges sellers any pool fees and pays in PPS.. I think


LOL i was wrong just read the FAQ:

and i quote:


What is the fee for using this service?

NiceHash charges a processing fee from each party of hash rate trade (buyers and sellers) made through the service. Currently our fee is set at 3%.

https://www.nicehash.com/?p=faq#faqg2

Icon

[crackfoo]

is there an alternative to nicehash, to send my decred hashrate to, and get payed directly in btc? just with less fees .

Can use www.zpool.ca. We'd love more hashrate and payout in BTC or whatever currency we mine.

Cheers

[jackbox]

Any way to change the background color the web page when I view my miner using a local browswer? Such as LOCALIP:3333. I don't like that gray background and would to change it to black or another dark color.

[xanx]

Hi all, I wanted to mine on my other machine and just copied my bat file and I get an error every time I run it.. the error is no pool specified , specify at least one valid pool in the e pool parameter, which I have done already! Why is this happening?

[Westfiled]

is there an alternative to nicehash, to send my decred hashrate to, and get payed directly in btc? just with less fees .

Can use www.zpool.ca. We'd love more hashrate and payout in BTC or whatever currency we mine.

Cheers

I might give it a try.

[drrobert]

i have a small problem with program atm every 40-60 minutes pc will restart go under window blue screen irq not less or equal, i don't understand why.

To high of a -DCRI, or bad overclock, or a bad bios flash

i used -dcri 7 had 185 mhs with 6 cards now i remove it and use default value and i get 182mhs will see what happen i hope to fix this problem.

[rawbot]

I have a spare 6 pin sata port on my EVGA supernova modular PSU.  If I buy a 6 pin male to 6 pin male modular cable, can I plug that into my PCIE riser to power it safely?

[Wicard]

Hi all, I wanted to mine on my other machine and just copied my bat file and I get an error every time I run it.. the error is no pool specified , specify at least one valid pool in the e pool parameter, which I have done already! Why is this happening?

By the sound of it you are mining ETH only, add -mode 1 to your string otherwise it will keep on searching for second pool.

hope it helps..

[notbatman]

I seem to have an issue, well two issues.

#1 the miner crashes/freezes after it exits or the watchdog restarts it and I can't figure out why.

#2 here's a the log file of the GPUs halting and the miner restarting. Why did the GPUs stop, I can't figure out why? It crashed/froze after it restarted and I lost many hours of mining time.

Code:

00:23:58:748	3cff9700	parse packet: 236
00:23:58:748	3cff9700	ETH: job changed
00:23:58:748	3cff9700	new buf size: 0
00:23:58:748	3cff9700	ETH: 05/05/17-00:23:58 - New job from musicoin.nomnom.technology:9999
00:23:58:748	3cff9700	target: 0x0000000225c17d04 (diff: 2000MH), epoch #13
00:23:58:748	3cff9700	ETH - Total Speed: 98.703 Mh/s, Total Shares: 1080, Rejected: 2, Time: 06:02
00:23:58:748	3cff9700	ETH: GPU0 15.153 Mh/s, GPU1 19.916 Mh/s, GPU2 21.565 Mh/s, GPU3 21.514 Mh/s, GPU4 20.555 Mh/s
00:23:58:748	3cff9700	 DCR - Total Speed: 5922.173 Mh/s, Total Shares: 1150, Rejected: 3
00:23:58:748	3cff9700	 DCR: GPU0 909.169 Mh/s, GPU1 1194.958 Mh/s, GPU2 1293.899 Mh/s, GPU3 1290.819 Mh/s, GPU4 1233.328 Mh/s
00:23:58:888	68a84740	GPU0 t=62C fan=90%, GPU1 t=63C fan=84%, GPU2 t=61C fan=43%, GPU3 t=59C fan=40%, GPU4 t=62C fan=40%
00:23:58:888	68a84740	em hbt: 1, dm hbt: 1, fm hbt: 1, 
00:23:58:888	68a84740	watchdog - thread 0, hb time 2758
00:23:58:888	68a84740	watchdog - thread 1, hb time 2794
00:23:58:888	68a84740	watchdog - thread 2, hb time 2801
00:23:58:888	68a84740	watchdog - thread 3, hb time 2775
00:23:58:889	68a84740	watchdog - thread 4, hb time 2775
00:23:58:889	68a84740	watchdog - thread 5, hb time 2799
00:23:58:889	68a84740	watchdog - thread 6, hb time 2771
00:23:58:889	68a84740	watchdog - thread 7, hb time 2796
00:23:58:889	68a84740	watchdog - thread 8, hb time 2809
00:23:58:889	68a84740	watchdog - thread 9, hb time 2783
00:23:59:318	3cff9700	ETH: checking pool connection...
00:23:59:318	3cff9700	send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

00:23:59:352	3cff9700	got 237 bytes
00:23:59:352	3cff9700	buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}

00:23:59:352	3cff9700	parse packet: 236
00:23:59:352	3cff9700	ETH: job is the same
00:23:59:352	3cff9700	new buf size: 0
00:24:03:769	3dffb700	GPU4 DAG creation time - 5018 ms
00:24:03:769	3dffb700	Setting DAG epoch #121 for GPU4 done
00:24:03:769	3dffb700	DevFee: restart timer because of updating DAG
00:24:03:769	5544e700	Setting DAG epoch #121 for GPU1
00:24:07:855	3cff9700	send: {"id":6,"worker":"linux","jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x139a9fb", "0x000000000000000000000000000000000000000000000000000000003a79d94e"]}

00:24:07:889	3cff9700	got 39 bytes
00:24:07:889	3cff9700	buf: {"id":6,"jsonrpc":"2.0","result":true}

00:24:07:889	3cff9700	parse packet: 38
00:24:07:889	3cff9700	new buf size: 0
00:24:08:763	5544e700	GPU1 DAG creation time - 4894 ms
00:24:08:763	5544e700	Setting DAG epoch #121 for GPU1 done
00:24:08:763	5544e700	DevFee: restart timer because of updating DAG
00:24:08:763	3f7fe700	Setting DAG epoch #121 for GPU2
00:24:09:319	3cff9700	ETH: checking pool connection...
00:24:09:319	3cff9700	send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

00:24:09:354	3cff9700	got 237 bytes
00:24:09:354	3cff9700	buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}

00:24:09:354	3cff9700	parse packet: 236
00:24:09:354	3cff9700	ETH: job is the same
00:24:09:354	3cff9700	new buf size: 0
00:24:10:864	5544e700	ETH: put share nonce 289644a40270f06d
00:24:10:864	5544e700	DevFee: ETH round found 1 shares
00:24:10:864	3bff7700	DevFee: ETH: 05/05/17-00:24:10 - SHARE FOUND - (GPU 1)
00:24:10:864	3bff7700	send: {"id":4,"method":"eth_submitWork","params":["0x289644a40270f06d","0xd3fceb4972e2bb316d331c1ac07c817488888b6fbea6fca37f6bcce90a169121","0x479ed8ffc20b8e8989ea6ac9dd0d411f394bd07777174f2c774a65a4d2f5a815"]}

00:24:10:961	3bff7700	got 39 bytes
00:24:10:961	3bff7700	buf: {"id":4,"jsonrpc":"2.0","result":true}

00:24:10:961	3bff7700	parse packet: 38
00:24:10:961	3bff7700	ETH: Share accepted (96 ms)!

00:24:10:961	3bff7700	new buf size: 0
00:24:10:980	3bff7700	got 248 bytes
00:24:10:980	3bff7700	buf: {"id":0,"jsonrpc":"2.0","result":["0x2cf04207cd9afbc1e426cda6b5e286ca84d6986fe0f5aa063a7d398af9b661b5","0x064ef82d7269405eb06162f7d33f2b6aa2a23741c9a0d06a648460e17b48ab4c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x37bf46"]}

00:24:10:980	3bff7700	parse packet: 247
00:24:10:980	3bff7700	ETH: job changed
00:24:10:980	3bff7700	new buf size: 0
00:24:10:980	3bff7700	DevFee: ETH: 05/05/17-00:24:10 - New job from us1.ethpool.org:3333
00:24:10:980	3bff7700	target: 0x0000000112e0be82
00:24:13:879	3f7fe700	GPU2 DAG creation time - 5017 ms
00:24:13:879	3f7fe700	Setting DAG epoch #121 for GPU2 done
00:24:13:879	3f7fe700	DevFee: restart timer because of updating DAG
00:24:13:879	3e7fc700	Setting DAG epoch #121 for GPU3
00:24:16:907	68a84740	Got incorrect temperature 511, ignore
00:24:16:907	68a84740	Got incorrect temperature 511, ignore
00:24:16:907	68a84740	Got incorrect temperature 511, ignore
00:24:16:908	68a84740	Got incorrect temperature 511, ignore
00:24:19:321	3cff9700	ETH: checking pool connection...
00:24:19:321	3cff9700	send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

00:24:19:357	3cff9700	got 237 bytes
00:24:19:357	3cff9700	buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}

00:24:19:357	3cff9700	parse packet: 236
00:24:19:357	3cff9700	ETH: job is the same
00:24:19:357	3cff9700	new buf size: 0
00:24:19:494	3cff9700	got 237 bytes
00:24:19:495	3cff9700	buf: {"id":0,"jsonrpc":"2.0","result":["0x3c2c66c4303add4353de34af2e76d112c2907f95e17ebd94372d57484596e0e4","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}

00:24:19:495	3cff9700	parse packet: 236
00:24:19:495	3cff9700	ETH: job changed
00:24:19:495	3cff9700	new buf size: 0
00:24:19:495	3cff9700	ETH: 05/05/17-00:24:19 - New job from musicoin.nomnom.technology:9999
00:24:19:495	3cff9700	target: 0x0000000225c17d04 (diff: 2000MH), epoch #13
00:24:19:495	3cff9700	ETH - Total Speed: 0.000 Mh/s, Total Shares: 1080, Rejected: 2, Time: 06:03
00:24:19:495	3cff9700	ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
00:24:19:495	3cff9700	 DCR - Total Speed: 0.000 Mh/s, Total Shares: 1150, Rejected: 3
00:24:19:495	3cff9700	 DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
00:24:19:910	68a84740	Got incorrect temperature 511, ignore
00:24:19:910	68a84740	Got incorrect temperature 511, ignore
00:24:19:910	68a84740	Got incorrect temperature 511, ignore
00:24:19:910	68a84740	Got incorrect temperature 511, ignore
00:24:20:012	3bff7700	got 248 bytes
00:24:20:012	3bff7700	buf: {"id":0,"jsonrpc":"2.0","result":["0xe22b4abeb25b318936269369f09a2b7f3fee6ab4d84512e5d2490fc7444e1e5d","0x064ef82d7269405eb06162f7d33f2b6aa2a23741c9a0d06a648460e17b48ab4c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x37bf47"]}

[jackbox]

I seem to have an issue, well two issues.

#1 the miner crashes/freezes after it exits or the watchdog restarts it and I can't figure out why.

#2 here's a the log file of the GPUs halting and the miner restarting. Why did the GPUs stop, I can't figure out why? It crashed/froze after it restarted and I lost many hours of mining time.

Code:

00:23:58:748	3cff9700	parse packet: 236
00:23:58:748	3cff9700	ETH: job changed
00:23:58:748	3cff9700	new buf size: 0
00:23:58:748	3cff9700	ETH: 05/05/17-00:23:58 - New job from musicoin.nomnom.technology:9999
00:23:58:748	3cff9700	target: 0x0000000225c17d04 (diff: 2000MH), epoch #13
00:23:58:748	3cff9700	ETH - Total Speed: 98.703 Mh/s, Total Shares: 1080, Rejected: 2, Time: 06:02
00:23:58:748	3cff9700	ETH: GPU0 15.153 Mh/s, GPU1 19.916 Mh/s, GPU2 21.565 Mh/s, GPU3 21.514 Mh/s, GPU4 20.555 Mh/s
00:23:58:748	3cff9700	 DCR - Total Speed: 5922.173 Mh/s, Total Shares: 1150, Rejected: 3
00:23:58:748	3cff9700	 DCR: GPU0 909.169 Mh/s, GPU1 1194.958 Mh/s, GPU2 1293.899 Mh/s, GPU3 1290.819 Mh/s, GPU4 1233.328 Mh/s
00:23:58:888	68a84740	GPU0 t=62C fan=90%, GPU1 t=63C fan=84%, GPU2 t=61C fan=43%, GPU3 t=59C fan=40%, GPU4 t=62C fan=40%
00:23:58:888	68a84740	em hbt: 1, dm hbt: 1, fm hbt: 1, 
00:23:58:888	68a84740	watchdog - thread 0, hb time 2758
00:23:58:888	68a84740	watchdog - thread 1, hb time 2794
00:23:58:888	68a84740	watchdog - thread 2, hb time 2801
00:23:58:888	68a84740	watchdog - thread 3, hb time 2775
00:23:58:889	68a84740	watchdog - thread 4, hb time 2775
00:23:58:889	68a84740	watchdog - thread 5, hb time 2799
00:23:58:889	68a84740	watchdog - thread 6, hb time 2771
00:23:58:889	68a84740	watchdog - thread 7, hb time 2796
00:23:58:889	68a84740	watchdog - thread 8, hb time 2809
00:23:58:889	68a84740	watchdog - thread 9, hb time 2783
00:23:59:318	3cff9700	ETH: checking pool connection...
00:23:59:318	3cff9700	send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

00:23:59:352	3cff9700	got 237 bytes
00:23:59:352	3cff9700	buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}

00:23:59:352	3cff9700	parse packet: 236
00:23:59:352	3cff9700	ETH: job is the same
00:23:59:352	3cff9700	new buf size: 0
00:24:03:769	3dffb700	GPU4 DAG creation time - 5018 ms
00:24:03:769	3dffb700	Setting DAG epoch #121 for GPU4 done
00:24:03:769	3dffb700	DevFee: restart timer because of updating DAG
00:24:03:769	5544e700	Setting DAG epoch #121 for GPU1
00:24:07:855	3cff9700	send: {"id":6,"worker":"linux","jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x139a9fb", "0x000000000000000000000000000000000000000000000000000000003a79d94e"]}

00:24:07:889	3cff9700	got 39 bytes
00:24:07:889	3cff9700	buf: {"id":6,"jsonrpc":"2.0","result":true}

00:24:07:889	3cff9700	parse packet: 38
00:24:07:889	3cff9700	new buf size: 0
00:24:08:763	5544e700	GPU1 DAG creation time - 4894 ms
00:24:08:763	5544e700	Setting DAG epoch #121 for GPU1 done
00:24:08:763	5544e700	DevFee: restart timer because of updating DAG
00:24:08:763	3f7fe700	Setting DAG epoch #121 for GPU2
00:24:09:319	3cff9700	ETH: checking pool connection...
00:24:09:319	3cff9700	send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

00:24:09:354	3cff9700	got 237 bytes
00:24:09:354	3cff9700	buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}

00:24:09:354	3cff9700	parse packet: 236
00:24:09:354	3cff9700	ETH: job is the same
00:24:09:354	3cff9700	new buf size: 0
00:24:10:864	5544e700	ETH: put share nonce 289644a40270f06d
00:24:10:864	5544e700	DevFee: ETH round found 1 shares
00:24:10:864	3bff7700	DevFee: ETH: 05/05/17-00:24:10 - SHARE FOUND - (GPU 1)
00:24:10:864	3bff7700	send: {"id":4,"method":"eth_submitWork","params":["0x289644a40270f06d","0xd3fceb4972e2bb316d331c1ac07c817488888b6fbea6fca37f6bcce90a169121","0x479ed8ffc20b8e8989ea6ac9dd0d411f394bd07777174f2c774a65a4d2f5a815"]}

00:24:10:961	3bff7700	got 39 bytes
00:24:10:961	3bff7700	buf: {"id":4,"jsonrpc":"2.0","result":true}

00:24:10:961	3bff7700	parse packet: 38
00:24:10:961	3bff7700	ETH: Share accepted (96 ms)!

00:24:10:961	3bff7700	new buf size: 0
00:24:10:980	3bff7700	got 248 bytes
00:24:10:980	3bff7700	buf: {"id":0,"jsonrpc":"2.0","result":["0x2cf04207cd9afbc1e426cda6b5e286ca84d6986fe0f5aa063a7d398af9b661b5","0x064ef82d7269405eb06162f7d33f2b6aa2a23741c9a0d06a648460e17b48ab4c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x37bf46"]}

00:24:10:980	3bff7700	parse packet: 247
00:24:10:980	3bff7700	ETH: job changed
00:24:10:980	3bff7700	new buf size: 0
00:24:10:980	3bff7700	DevFee: ETH: 05/05/17-00:24:10 - New job from us1.ethpool.org:3333
00:24:10:980	3bff7700	target: 0x0000000112e0be82
00:24:13:879	3f7fe700	GPU2 DAG creation time - 5017 ms
00:24:13:879	3f7fe700	Setting DAG epoch #121 for GPU2 done
00:24:13:879	3f7fe700	DevFee: restart timer because of updating DAG
00:24:13:879	3e7fc700	Setting DAG epoch #121 for GPU3
00:24:16:907	68a84740	Got incorrect temperature 511, ignore
00:24:16:907	68a84740	Got incorrect temperature 511, ignore
00:24:16:907	68a84740	Got incorrect temperature 511, ignore
00:24:16:908	68a84740	Got incorrect temperature 511, ignore
00:24:19:321	3cff9700	ETH: checking pool connection...
00:24:19:321	3cff9700	send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

00:24:19:357	3cff9700	got 237 bytes
00:24:19:357	3cff9700	buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}

00:24:19:357	3cff9700	parse packet: 236
00:24:19:357	3cff9700	ETH: job is the same
00:24:19:357	3cff9700	new buf size: 0
00:24:19:494	3cff9700	got 237 bytes
00:24:19:495	3cff9700	buf: {"id":0,"jsonrpc":"2.0","result":["0x3c2c66c4303add4353de34af2e76d112c2907f95e17ebd94372d57484596e0e4","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}

00:24:19:495	3cff9700	parse packet: 236
00:24:19:495	3cff9700	ETH: job changed
00:24:19:495	3cff9700	new buf size: 0
00:24:19:495	3cff9700	ETH: 05/05/17-00:24:19 - New job from musicoin.nomnom.technology:9999
00:24:19:495	3cff9700	target: 0x0000000225c17d04 (diff: 2000MH), epoch #13
00:24:19:495	3cff9700	ETH - Total Speed: 0.000 Mh/s, Total Shares: 1080, Rejected: 2, Time: 06:03
00:24:19:495	3cff9700	ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
00:24:19:495	3cff9700	 DCR - Total Speed: 0.000 Mh/s, Total Shares: 1150, Rejected: 3
00:24:19:495	3cff9700	 DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
00:24:19:910	68a84740	Got incorrect temperature 511, ignore
00:24:19:910	68a84740	Got incorrect temperature 511, ignore
00:24:19:910	68a84740	Got incorrect temperature 511, ignore
00:24:19:910	68a84740	Got incorrect temperature 511, ignore
00:24:20:012	3bff7700	got 248 bytes
00:24:20:012	3bff7700	buf: {"id":0,"jsonrpc":"2.0","result":["0xe22b4abeb25b318936269369f09a2b7f3fee6ab4d84512e5d2490fc7444e1e5d","0x064ef82d7269405eb06162f7d33f2b6aa2a23741c9a0d06a648460e17b48ab4c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x37bf47"]}

Same things happens to me so I used "-r 1" with a reboot. bat and the miner reboots my computer instead of restarting and hanging.

[sundownz]

I got the dual mining working via Nicehash.

I tried LBRY and also PASCAL but both of them slowed down my ETH mining substantially... by about 6 MH/s for either of them.

I also tried DCR and it doesn't show any speed penalty... but is having 100% rejection rate.

Ideas on that ?

[jackbox]

I got the dual mining working via Nicehash.

I tried LBRY and also PASCAL but both of them slowed down my ETH mining substantially... by about 6 MH/s for either of them.

I also tried DCR and it doesn't show any speed penalty... but is having 100% rejection rate.

Ideas on that ?

What version of the miner are you using? For DCR you can only use 9.2 and 9.3 due to header change. Earlier versions will only create invalid shares.