Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[avirdoz]

Guys, can someone tell which version of amd driver from 17.x branch works with modded bios (don't check signature)?

I have RX 580/480 and use the latest 17.5.2 drivers. You have to use the pixel patcher to disable the Bios signature check any time you install the drivers.

https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher

16.9.2 works without any patch, but i doubt that rx 5xx will recognized properly with this version.

[detonyle]

hi Guys,

Currently with 17.5.2, does someone test the brand news 17.6.1?

Cheers

[ffthomas]

@claymore: Sir, maybe I found a bug. If I start Ethman and there is any temperature or fan speed warning, then Ethman doesn't show any info about that rig, only rig name and IP:port. (If the warning "happens" later, there is no problem.)

Also @claymore: First thanks for your work, EthMan ist going exactly the direction we need. BUT:
The above mentioned behaviour is even worse: If a rig is in a warning state (tested only with mining speed) - it will NOT detect when the rig goes completely offline and so not trigger the notificatian and external reset. This makes it quite useless in a (not so unusual) number of cases.
Another (maybe related point) is the fact that it does not retrigger the events. Say if the first restart happens and the rig is still offline (i.e. Windows booting into "repair mode") it does not perform a second reset and the rig will stay offline until manual intervention.
Could you please have a look into it? Thank you!

Confirmed, fixed. Since I don't have separate archive for EthMan, I've re-uploaded v9.5 with updated EthMan, please re-download it. In next version I will process all warnings separately and will add own options in GUI for every event, so for example you can setup warning for fan speed to see it in the list of miners, but disable starting .BAT or/and email for this event.

Thank you very much!

[Demarsac]

Hey Guys,

Can someone solve this problem?

I am mining at Ethermine.org
I have a 7-GPU Rig that reports locally 200 Mh/s
and a 6-GPU RIG that reports locally 174 Mh/s

WHY the 7-GPU RIG has ALWAYS LESS effective hashrate than the 6-GPU RIG?

Both Rigs are connected to the same router, same network

It has nothing to do with luck since i am observing this for over a week now...

Any thoughts??

[spyshagg]

@Claymore


Whats the criteria for the GPU Identification?  How does claymore determines who is GPU 0 1 2 3 etc?


I need to apply -cvddc to two gpus but not the other 5

[maxpowerzz92]

So Claymore is the only dual miner available? 2 percent fee is a joke, so I kind of wish to get rid of it. This guy is richer than Richie Rich, little reason for him not to make it 1 or even 0,5%
I can't stand moguls, raised by hippies, so I rather lose 1%, than support a selfish person 2%

But hey if there is another dual miner that would be great.

There's no other dual miner so that's why people pay the 2%.  The additional profits offset the dev fee for those inclined to do so.  Supply/Demand.  Why would someone make a dual miner and share it for next to nothing?  They'd probably keep it to themselves to improve their own hashrate.

[mattmathison]

Anyone else geting error from "stratum+tcp://sia.suprnova.cc:2786" or "sia.suprnova.cc:7777"?
My claymore shows this:

Code:

Setting DAG epoch #128 for GPU0
Create GPU buffer for GPU0
GPU0 DAG creation time - 4760 ms
Setting DAG epoch #128 for GPU0 done
 SC: Stratum - connecting to 'sia.suprnova.cc' <46.105.118.15> port 2786
 SC: Stratum - Cannot connect to sia.suprnova.cc:2786
 SC: Stratum - Failed to connect, retry in 20 sec...

[cmisztur]

Latest version is v9.5:

-tt   set target GPU temperature. For example, "-tt 80" means 80C temperature. You can also specify values for every card, for example "-tt 70,80,75".
   You can also set static fan speed if you specify negative values, for example "-tt -50" sets 50% fan speed. Specify zero to disable control and hide GPU statistics.
   "-tt 1" (default) does not manage fans but shows GPU temperature and fan status every 30 seconds. Specify values 2..5 if it is too often.
   Note: for NVIDIA cards only temperature monitoring is supported, temperature management is not supported.
   Note: for Linux gpu-pro drivers, miner must have root access to manage fans, otherwise only monitoring will be available.

@Claymore: are temps and fan speed available for RX 5xx with latest driver in Windows 10?  They display for NVIDIA cards but not for the 5xx series.

/c

You need a monitor or a dummy plug in the card plugged in the primary PCI-E x16 slot for the AMD drivers to be able to read and set the fan and temperature settings. You also need to change the primary video to the PCI-E slot and not the on board video in the motherboard Bios.

@Vann: thanks buddy, that works for the first card.  What about the others?

/c

[rintic13]

I greet everyone, very interesting information they exchange in the forum. My query is if I can use in the same rigs to mine, the radeon rx 460 and the nvidia gtx 1050ti.

Thank you.
 

the answer is yes, Claymore miner will recognize both AMD and NVIDIA cards.

btw, what ETH MHs are you getting for 1050ti ?

I do not know, is that the technical characteristics are similar to those of radeon rx 460, is there any place where you can investigate the MH / s it generates?

An RX460 4GB (extra cores unlocked) gets 11MH/s. You might get up to 14MH/s if you also copy the 1500 or 1700 mem straps to 2000  depending on mfg but I didn't have much luck with that on my Gigabyte card.

777000000000000022AA1C00CDDD6B3DA055101531CD4506006005007C041420CA8980A9020004C 01813272C652C3916 for Micron/Elpida

[Tijuana]

Hello.

Im minning with 6x KFA2 Geforce 1060. Windows 10 x64, and maximum mh's i get is 2.5 at the moment.. Zec and other coins are 280 sols. I want to know whats the trick, or why im getting so bad results on eth? Anybody have same problem?

Any thoughts?

Does anyone have same problems?

Check your Windows version. When I had build 1511 installed I was getting similar hashrates. On 1703 I'm where I should be.

[McNippy]

Hey guys, another newbie here. I've configured claymore with nanopool's auto generating tool. For Etherium I opened a wallet on myetherwallet and it works fine but I am having trouble with Siacoins. This is my program view https://i.imgur.com/EkecRfW.png, siacoin shares get stuck quite often (to the point where Current Calculated Hashrate and worker on nanopool stat page goes to 0/offline). Is it a server issue?

[Claymore]

@Claymore
Whats the criteria for the GPU Identification?  How does claymore determines who is GPU 0 1 2 3 etc?
I need to apply -cvddc to two gpus but not the other 5

Check "KNOWN ISSUES" section in Readme. Voltage/clocks settings are related to ADL, i.e. to the list of fan/temperatures. Disable GPUs one by one (by pressing 0..9 keys) and see temperatures after a while, it will show what GPU you disabled.

[fuliaro]

Hey guys, another newbie here. I've configured claymore with nanopool's auto generating tool. For Etherium I opened a wallet on myetherwallet and it works fine but I am having trouble with Siacoins. This is my program view https://i.imgur.com/EkecRfW.png, siacoin shares get stuck quite often (to the point where Current Calculated Hashrate and worker on nanopool stat page goes to 0/offline). Is it a server issue?

I got this problem here too, just changed the server to US and worked fine.
Do you mind to tell what graphics card are you using?

[Candsno8]

Does anyone know if its possible to have 3 cards mine EXP and other 3 card mine ETH on the same rig?

I have 3x 2GB card and 3x 4GB cards, so I can't mine ETH with all 6 due to DAG size.

How can I config the miner to mine 2 different ETH based pools (1 ETH pool & 1 EXP pool) at the same time?

Thanks!

My response to lazyturtle is applicable here as well - just substitute the second/solo mine call for whichever pool you need for the 2GB cards.

For example:  
EthDcrMiner64.exe -epool eth.coinmine.pl:4000 -ewal lazyturtle.1 -epsw x -di 012 -dpool sia.suprnova.cc:7777 -dwal lazyturtle-dpsw x -dcoin sia -allpools 1
EthDcrMiner64.exe -epool <EXP.pool.here> -ewal lazyturtle.1 -epsw x -di 345

Now to add another twist: can you run one instance of the miner mining ethash and another instance mining equihash?

[AlainC]

Hi,
I've recently moved to Alpereum, and I can now see my stale shares, up to 10%, but sometime 0.
my ping to the pool is about 40ms (sometime double).
Initially I had -etht 100
Is it the important parameter for stale shares ?
should I lower it ?
Some people set -etht 1000 and default value is -etht 200
what should be the best given my ping ?

[McNippy]

Hey guys, another newbie here. I've configured claymore with nanopool's auto generating tool. For Etherium I opened a wallet on myetherwallet and it works fine but I am having trouble with Siacoins. This is my program view https://i.imgur.com/EkecRfW.png, siacoin shares get stuck quite often (to the point where Current Calculated Hashrate and worker on nanopool stat page goes to 0/offline). Is it a server issue?

I got this problem here too, just changed the server to US and worked fine.
Do you mind to tell what graphics card are you using?

R9 290. Getting 28 eth speed and 190 sia.

[Xuper]

Hello

My Rig 1:
OS and Driver : Non-WHQL-Win7-64Bit-Radeon-Software-Crimson-ReLive-17.5.2-May17
GPU : Asus Strix RX 480 (Linked , running at x4 v2 ) , XFX GTR RX 480 (Primary , running at x16 v2)
Mobo : MSI Z97 Gaming 5

My batch :

set GPU_FORCE_64BIT_PTR=0
set GPU_MAX_HEAP_SIZE=100
set GPU_USE_SYNC_OBJECTS=1
set GPU_MAX_ALLOC_PERCENT=100
set GPU_SINGLE_ALLOC_PERCENT=100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal x -epsw x -powlim -10,-10  -tstop 80,80 -tt 65,65 -fanmin 50,50 -fanmax 65,65 -cclock 1100,1100 -mclock 2000,2000 -cvddc 900,900 -mvddc 950,950 -dbg -1


Why does claymore show ?

GPU0 t=64c fan=52%

But On other rig 2 , It shows :

GPU0 t=64C fan=50%, GPU1 t=63C fan=44%

How to fix it ?

Anyone has this solution ?

[holzer]

Having some issues dual mining and was hoping someone could help me out here. I have a GTX 970 using drivers 347.88 on Win 10. Overclocked just mining ethereum I am getting almost 19Mh/s. When I try to dual mine ethereum and siacoin my ethereum hash rate drops in half. Dual mining I only get about 9 Mh/s for ethereum and about 95 Mh/s for siacoin. Im using this string in my bat file

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal address.worker -epsw x -dpool stratum+tcp://sia-us-east1.nanopool.org:7777 -dwal address.worker -dcoin sc

Any help or suggestions are appreciated.

[lsszmeja]

hello, Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.5 bug, not connet servers ethermine pool

Bug is somewhere else Please open ethermine.org in browser and read "How to Connect" help section, there is no "-esm 2" option there...

Anyone having issues when the miner reboots due to a GPU having an open cl issue?
From time to time this happens and when the miner is restarted automatically its stuck at doing dags or something and never gets mining again..
I have noticed when I kill the actual window in windows and click the bat file again it works.
@Claymore is their a way for it to completely kill the window and wait a few secs before launching again.  I believe on some hangs this would help out.

1. Often when OpenCL fails, you have to reboot the system, not just restart miner. Sometimes even soft reboot won't work and you have to press Reset button. It is because the fail is at drivers level, Windows does not like such things and drivers too.
2. Miner cannot kill itself, then wait a few seconds and start itself again. Because it needs to be running to start anything. But you can create some .BAT file for it, for example, you can wait and start miner again in reboot.bat if you use "-r 1" option.

Say if one of your GPU's doesn't fully crap itself but starts hashing at a quarter of what it was before. Is there a setting to be able to make "-r 1" to kick in at that stage?

[lsszmeja]

Having some issues dual mining and was hoping someone could help me out here. I have a GTX 970 using drivers 347.88 on Win 10. Overclocked just mining ethereum I am getting almost 19Mh/s. When I try to dual mine ethereum and siacoin my ethereum hash rate drops in half. Dual mining I only get about 9 Mh/s for ethereum and about 95 Mh/s for siacoin. Im using this string in my bat file

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal address.worker -epsw x -dpool stratum+tcp://sia-us-east1.nanopool.org:7777 -dwal address.worker -dcoin sc

Any help or suggestions are appreciated.

lower the intensity by hitting "-" while the miner is running until ether hashrate is back at 19mhs then run the extra command

so say the intensity works at 17 use the following in bat

use "-dcri 17"