Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[rozsada]

hi guys, need your help!
I want to monitor remotely (in another house) a rig. I have the ip and the local ip.
How to do that?

[seljak]

After windows update i get an error:

The aplication was unable to start correctly(0xc000007b).

Is there a solution to this problem?

[cprieto]

Hello,

Have you guys tried Dual mining with GTX 1070 cards? hows your hash? its decent compared to rx 480/580 series

This is my hash dual mining on rx 480

ETH - Total Speed: 29.143 Mh/s  SC - Total Speed: 582.858 Mh/s

I tried to find some information, i found a guy on youtube hashing 200-300 when dual mining.. its normal?

Regards

What are your settings to get 29? I have 2 rx 480s in my system dual mining the same coins. I get 24 on both cards for ETH and 1200+ for SC using dcri 22. If it's higher, I get a higher SC hash rate but slightly lower ETH hash rate. If I lower it under 22, ETH stays the same at 24/card, but SC gets lower. I'm running both cards at 0 mV (I keep it there to prevent crashes), 0 power limit, 90 temp limit, 1154 core clock, 2228 memory clock (I notice no difference increasing this to 2250), custom fan speed.

Any suggestions would be appreciated.

well. i have 2 msi rx 480 4gb, 1 rx sapphire 4gb, 1 xfx rx 480 8gb

stock i get about 24-26. flashed 28-29..

did you flashed your cards?

regards

How about mining using RX 570?

pretty decent 27-28 (Solo mining)..

[oakleerulez]

Hi All,
Was hoping for some help/suggestions.  I am trying to use claymore 9.5 to mine with 5 Zotac 1070 minis.  When I run the miner it only comes in at 2.5mh/s per card.  I dont think its a power issue since it will mine a variety of other algorithms.  Currently using stock settings in windows10. 

Any suggestions would be awesome.

[salmonmeat]

Is it still impossible to mine with cards with less than 2 GB video memory? looks like latest version of claymore miner no longer uses DAG files...

[bensam1231]

@Claymore when is Nvidia getting ASM enhancements? Is that just going to be AMD only or will they come to Nvidia six months down the line like most major changes to the miner?

[NoOneLt]

Hi All,
Was hoping for some help/suggestions.  I am trying to use claymore 9.5 to mine with 5 Zotac 1070 minis.  When I run the miner it only comes in at 2.5mh/s per card.  I dont think its a power issue since it will mine a variety of other algorithms.  Currently using stock settings in windows10. 

Any suggestions would be awesome.

Do you have latest build of windows? Also what driver version you are using? i'am on 382.33 and getting around 21mh/s from 1060/6GB.


Anyone tried latest 382.53 - issues? Improvements?

[HappyS]

Hi there, can somebody help me with one question:

Can i install this miner like a "service" on my work PC's (windows) ? I have a lot of 1060-1080 card on work ant want use it for mining but cant "autorun" script...

[antiycda]

Finally i got my 5 X 1060 3G rig up&running. 105Mhs / 600 Watt. thanks guys

[oakleerulez]

Hi All,
Was hoping for some help/suggestions.  I am trying to use claymore 9.5 to mine with 5 Zotac 1070 minis.  When I run the miner it only comes in at 2.5mh/s per card.  I dont think its a power issue since it will mine a variety of other algorithms.  Currently using stock settings in windows10. 

Any suggestions would be awesome.

Do you have latest build of windows? Also what driver version you are using? i'am on 382.33 and getting around 21mh/s from 1060/6GB.


Anyone tried latest 382.53 - issues? Improvements?

driver build 382.33
windows build 10586.916

[xleejohnx]

Hello,

I have some trouble using this miner. It seems to connect to the mining pool (suprnova.cc) but it doesn't mine. There are no "Share accepted" notices:



This is my config:

Code:

-epool stratum+tcp://eth.suprnova.cc:5000
-ewal username.eth1
-epsw xyz
-esm 3
-dpool stratum+tcp://dcr.suprnova.cc:3252
-dwal username.dcr1
-dpsw xyz
-mode 1
-allpools 1

Any idea why it doesn't work?

Best

edit:  just noticed you have esm 3 for nicehash try 1
also mode 1 is eth only and you have settings for mode 0

[jointheredditarmy]

Is this the right place to ask for technical help? Sorry, new to the forums!

I'm getting the following error repeated when trying to dual mine ETH/SC

15:32:39:297   2824   ETH: Stratum - Connected (eth-eu1.nanopool.org:9999)
15:32:39:359   2824   Socket was closed remotely (by pool)
15:32:39:361   2824   ETH: Job timeout, disconnect, retry in 20 sec...

Doesn't look like any other errors, can provide rest of logs if helpful.

configs below (stripped email and wallet). Please help!

-epool eth-eu1.nanopool.org:9999
-epsw x
-dpool stratum+tcp://sia-eu1.nanopool.org:7777
-dpsw x
-esm 1
-eres 1
-dcoin sc
-tt 75
-tstop 85

[xleejohnx]

Is this the right place to ask for technical help? Sorry, new to the forums!

I'm getting the following error repeated when trying to dual mine ETH/SC

15:32:39:297   2824   ETH: Stratum - Connected (eth-eu1.nanopool.org:9999)
15:32:39:359   2824   Socket was closed remotely (by pool)
15:32:39:361   2824   ETH: Job timeout, disconnect, retry in 20 sec...

Doesn't look like any other errors, can provide rest of logs if helpful.

configs below (stripped email and wallet). Please help!

-epool eth-eu1.nanopool.org:9999
-epsw x
-dpool stratum+tcp://sia-eu1.nanopool.org:7777
-dpsw x
-esm 1
-eres 1
-dcoin sc
-tt 75
-tstop 85

you are missing these command lines
-ewal YOUR_ETH_ADDRESS/YOUR_WORKER_NAME/YOUR_EMAIL
-dwal YOUR_SIA_ADDRESS/YOUR_WORKER_NAME/YOUR_EMAIL

EDIT: bad habit of copy and paste

[jointheredditarmy]

Is this the right place to ask for technical help? Sorry, new to the forums!

I'm getting the following error repeated when trying to dual mine ETH/SC

15:32:39:297   2824   ETH: Stratum - Connected (eth-eu1.nanopool.org:9999)
15:32:39:359   2824   Socket was closed remotely (by pool)
15:32:39:361   2824   ETH: Job timeout, disconnect, retry in 20 sec...

Doesn't look like any other errors, can provide rest of logs if helpful.

configs below (stripped email and wallet). Please help!

-epool eth-eu1.nanopool.org:9999
-epsw x
-dpool stratum+tcp://sia-eu1.nanopool.org:7777
-dpsw x
-esm 1
-eres 1
-dcoin sc
-tt 75
-tstop 85

you are missing these command lines
-ewal YOUR_ETH_ADDRESS/YOUR_WORKER_NAME/YOUR_EMAIL
-dwal YOUR_ETH_ADDRESS/YOUR_WORKER_NAME/YOUR_EMAIL

I deleted it when copying and pasting the configs from config.txt, but its there.

-ewal 0x7da5428e36A057A2f6C1BB0f96B1D04eD245a6a9/test_machine

[bobjones34]

Hi, ive looked eveywhere and cant find an answer.
Could someone please tell me what ssssssssssssssssssssssssssssssssssss
mean when i look at the miner ?
Cheers

[AriesIV10]

For all of you struggling to keep your rigs cool this time of year.. This dude has a cool idea


https://www.youtube.com/watch?v=E-_9F8R_PFU

I love ingenuity!!

[myty]

Hello.
I am using R9 380 Nitro Sapphire.
When i am mining solo Ethereum all is working fine, but when i dual mine with DECRED I get GPU artefacts.
Why is that?
Thank you!

anyone?

[xleejohnx]

Is this the right place to ask for technical help? Sorry, new to the forums!

I'm getting the following error repeated when trying to dual mine ETH/SC

15:32:39:297   2824   ETH: Stratum - Connected (eth-eu1.nanopool.org:9999)
15:32:39:359   2824   Socket was closed remotely (by pool)
15:32:39:361   2824   ETH: Job timeout, disconnect, retry in 20 sec...

Doesn't look like any other errors, can provide rest of logs if helpful.

configs below (stripped email and wallet). Please help!

-epool eth-eu1.nanopool.org:9999
-epsw x
-dpool stratum+tcp://sia-eu1.nanopool.org:7777
-dpsw x
-esm 1
-eres 1
-dcoin sc
-tt 75
-tstop 85

you are missing these command lines
-ewal YOUR_ETH_ADDRESS/YOUR_WORKER_NAME/YOUR_EMAIL
-dwal YOUR_ETH_ADDRESS/YOUR_WORKER_NAME/YOUR_EMAIL

I deleted it when copying and pasting the configs from config.txt, but its there.

-ewal 0x7da5428e36A057A2f6C1BB0f96B1D04eD245a6a9/test_machine

You need at add your email at the end

[Apolo.-]

Hello, i´m starting to mine eth, i have this config with a 7970 gpu

setx GPU_FORCE_64BIT_PTR 0

setx GPU_MAX_HEAP_SIZE 100

setx GPU_USE_SYNC_OBJECTS 1

setx GPU_MAX_ALLOC_PERCENT 100

setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0xdab6c630978e0f7059c07a7a8f3b2627359cd346.compunoe -epsw x




I´m having 11.7 mhs only, what am i doing wrong?

I uninstalled last drivers and installed 15.12

Gpu is without overclock

[notbatman]

^ mining the wrong coin, try one with a smaller DAG.