Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[kkourmousis]

AntMinePool seems to be going on and off for a little while now, good think is ETH keeps running solo, even though slower

[KJCrypto]

Anybody else getting a big ETH hash rate drop when dual mining Verge? I have played around with DCRI and it doesn't seem to effect the ETH hash rate much but I took a 26 mh/s hit when I started to dual mine Verge?

Same problem, dual mining doesn't affect my reported ETH hash rate but at my current speed of 480 MH/s reported I've only been getting 350 MH/s average for the last 24 hours.  I had my DCRI at 20, dropped it down to 10 and we'll see how it does.  I'll add more ram tomorrow to see if that could be the issue.

My reported in Claymore dropped which is turn drops the pool side too. According the usage my 8gb ram and virtual is fine... I went from 377mh/s to 350mh/s in claymore for eth when dual mining..

[Grinner888]

has anyone experienced gpu # 0 with zero hash rate? after a few seconds the miner will restart and will be stuck at open cl initializing. I have 7 rigs and only 2 rigs are experiencing this problem. I tried going back to v 10.5 but the problem persists! I did not have this problem prior to closing V 10.5 then running V11.0 with the same bat file. pls help.

after downgrade to 10.5 try to reboot, it helps in my case

I have tried to put in a dummy plug and all the gpus work  fine again.  but as soon as I remove the dummy plug, claymore crashes again.

[hschuett]

Thanks for all the help.  I just really don't think I could have solved this problem without all of the guidance you guys provided

Just spectacular

Completely new to mining but was given a decent GPU and so here I am. And I’ve done a week or two long exhausting research of the issues and still no solution that I can find.

Windows 10 pro
i5 Processor, 750 @ 2.67GHz
32Gb of Virtual memeory
8Gb of RAM
GeForce GTX 580, 3GB
NVIDIA 390.77
cuda 9.1
Claymore 11.0

I’ve tried several different miners and pools all with the same kinds of problems. I’ve tried different wallets.

I have no clue what to even look for now.

Errors I am getting:
21:37:10:433   1438   Setting DAG epoch #168 for GPU0
21:37:10:433   1438   Create GPU buffer for GPU0
21:37:10:776   1438   GPU 0, GpuMiner cu_kd failed 8 (0), invalid device function
21:37:10:792   1438   GPU 0, Calc DAG failed!
21:37:14:312   1438   Set global fail flag, failed GPU0
21:37:14:312   1438   GPU 0 failed
21:37:14:312   22d0   Setting DAG epoch #168 for GPU0
21:37:14:327   22d0   GPU 0, GpuMiner cu_kd failed 8 (0), invalid device function
21:37:14:327   22d0   GPU 0, Calc DAG failed!

[Grinner888]

has anyone experienced gpu # 0 with zero hash rate? after a few seconds the miner will restart and will be stuck at open cl initializing. I have 7 rigs and only 2 rigs are experiencing this problem. I tried going back to v 10.5 but the problem persists! I did not have this problem prior to closing V 10.5 then running V11.0 with the same bat file. pls help.

after downgrade to 10.5 try to reboot, it helps in my case

rebooting did not help. it is still stuck at initializing. is there a way to clear the cache files of claymore?

[Metroid]

Anybody else getting a big ETH hash rate drop when dual mining Verge? I have played around with DCRI and it doesn't seem to effect the ETH hash rate much but I took a 26 mh/s hit when I started to dual mine Verge?

Same problem, dual mining doesn't affect my reported ETH hash rate but at my current speed of 480 MH/s reported I've only been getting 350 MH/s average for the last 24 hours.  I had my DCRI at 20, dropped it down to 10 and we'll see how it does.  I'll add more ram tomorrow to see if that could be the issue.

Likely PSU or config issues.

[koshol]

EthMan 3.7 question:
- why I can't to hide any column in webserver?
- how to change the pool by EthMan?

Anyone else who have this problem?

[cscheat]

If you've got connection problems on antminepool try this:
XVG blake2s: added new mining port 9009. Please move to the new one. The 9008 is full

For example:

ETH: ethermine.org
XVG: antminepool

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x54abE209A969A9f3B0BF07D54647b786F09753b4.W1RX480 -epsw x -dpool stratum+tcp://s.antminepool.com:9009 -dwal D9dMdBssQZRDueBzVeRUsEFzmA5smW1kQA -dcoin blake2s -dpsw c=XVG -dcri 44

How to name my workers? not working for antmine

[KJCrypto]

If you've got connection problems on antminepool try this:
XVG blake2s: added new mining port 9009. Please move to the new one. The 9008 is full

For example:

ETH: ethermine.org
XVG: antminepool

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x54abE209A969A9f3B0BF07D54647b786F09753b4.W1RX480 -epsw x -dpool stratum+tcp://s.antminepool.com:9009 -dwal D9dMdBssQZRDueBzVeRUsEFzmA5smW1kQA -dcoin blake2s -dpsw c=XVG -dcri 44

How to name my workers? not working for antmine

Ahashpool has been working great try them out. You get paid in BTC too else you want to hold VERGE

[kakoluckiam]

If I can give a tip, a executable which allows to set individual gpu parameters would be very appreciated (and pretty easy to realize I guess, just something that translates input boxes to a .conf file).
Setting voltage and clock values become a bit frustrating for people like me that do it for every single gpu (happens to have rigs with different memories).

Btw: versione 11 is gr8, mining 32mh eth and 18gh xvg on 580s.
Keep the good work, fee totally deserved as always.

[mine_phun]

Quote from: mine_phun on Today at 02:51:52 AM
Quote
Both Uni and Ant seem to be having issues, understandable considering they have had thousands more miners connecting over the past couple of days.
With Uni I get rejected shares and with Ant I cannot currently connect.

Same here, guess they are overloaded. I took the liberty to create a pool myself today. The fee is 0,5% ( same as Ant ) and the pool is located in Amsterdam. No conversion or other hidden fees.

The address is: stratum+tcp://xvg-blake2s.nlpool.nl:5766
As username put in your Verge wallet address and use password "c=XVG"

thanks pointing some hash your way

Thanks, highly appreciated. It was not as simple as i thought but everything is running stable now. I will try to setup some other coins also next days for blake2s and keccak since the difficulty is rising quickly for xvg.

[hotx]

Anyone else have their AV go off saying Win32/CoinMiner!bit trojan is in the file?

[sebastian103]

Using new port solved conenction problems.

For rx 580 nitro+ 8 GB  -drci 51 works great. No hash drop for ETH.

http://i66.tinypic.com/10z8l60.png

config

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal "wallet".Worker1/"mail" -epsw x -dpool stratum+tcp://s.antminepool.com:9009 -dwal "wallet" -dcoin blake2s -dpsw c=XVG -ftime 10 -tstop 85 -fanmin 60 -cclock 1130 -mclock 2110 -cvddc 900 -mvddc 900 -dcri 50

[BC147852]

With asics coming out for all the dual mining algorithms currently supported. Would it be an idea to carry those eth optimisations from the dual mining mode over to the eth only one? Perhaps as a seperate option with a devfee of your choice obviously?

[biggee]

Getting the following with every version of Clay since, and including, 9.8 :

Single mining UBIQ.

Works fine for any length of time from 1hr to 24hrs and then crashes after a long line of :

ETH: job is the same

According to the logs.

Anybody know what is causing this?

Could it be a faulty card or riser?

One of my 470's (all ref version) is running much hotter than the others, they all pretty much stay around 55 - 65 degrees but this one is constantly running at 74 - 75. I've dropped the power limit on it to bring it down to about 67 and also tried turning this card off altogether but still getting crashes so not sure if this is even relevant.

I have 3 other rigs that are working absolutely fine, it's only this one giving me grief.

Specs : 1 x RX480, 5 x RX470 - Win 10, Crimson (08/08/17) v.22.19.659.0, Any Clay version from 9.8 up to 11.

[KJCrypto]

Anybody else getting a big ETH hash rate drop when dual mining Verge? I have played around with DCRI and it doesn't seem to effect the ETH hash rate much but I took a 26 mh/s hit when I started to dual mine Verge?

Same problem, dual mining doesn't affect my reported ETH hash rate but at my current speed of 480 MH/s reported I've only been getting 350 MH/s average for the last 24 hours.  I had my DCRI at 20, dropped it down to 10 and we'll see how it does.  I'll add more ram tomorrow to see if that could be the issue.

Likely PSU or config issues.

I rebooted and my ETH hash went back to normal. I had to play a little with ETHI and DCRI but now Im back at 378 MH/S for ETH and about 17500 MH/S for blake2s

[goodbitprofit]

Hi guys, I've just installed the new version and Pascal mining seems to be disable. Is it just me or Pascal is not allowed anymore?

Hello people, anyone with this problem too?

It works, but my 1sr rig windows crashed few times, so I jump back to 10.2, but on my second rig working 11 like a charm. Who knows...

[Earl_Vadim]

Hello please when i want to exclude one card from mining in dual mode it give me msg like this
B2s: authorization faild
Server full
Null
Socket was closed romotely by pool
B2s job timeout, disconnect , retry in 20 sec...

Can any one help me or share with me a bat file how to exclude one card from mining in dual ??!!!

Thanks in advance

I also get this error

Make own pool    http://verge-pool.online    FOR VERGE ONLY...
Welcome!!!  Port 5500

[thildp]

Does anybody know a good Pool to mine Creative Coin (kekkak algo)? As long as Verge is decreasing its price day by day...when Claymore released this 11.0 version, calculating on Whattomine it would give me 90 USD, now its 68 USD and down, down...

[goodbitprofit]

Anyone else have their AV go off saying Win32/CoinMiner!bit trojan is in the file?

I had on one rig, just deleted a file and everything is working.