kkourmousis
Member
Offline
Activity: 119
Merit: 10
|
|
February 24, 2018, 07:43:09 PM |
|
Okay understood. Thanks again for your interest
|
Buy me a souvlaki: ETH: 0x22D1C05F89dbe036aABFFEc197949E635903C6FA BTC: 1FHwEyiCqUTpauGfvPg5czMYoWMKqYGBWx
|
|
|
sexontoast
Newbie
Offline
Activity: 27
Merit: 1
|
|
February 24, 2018, 09:29:57 PM |
|
Still having issues with the inbuilt overclocking, Doesn't seem to register with multiple cards
The 3 configs I have tried
EthDcrMiner64.exe -epool etc-au1.nanopool.org:19999 -ewal Walletaddressisnormallyhere/RIG/myemail@.com.au -epsw x -mode 1 -ftime 10 -cvddc 930,930,930,930,930,930,930 -cclock 1150,1150,1150,1150,1150,1150,1150, -mvddc 930,930,930,930,930,930,930 -mclock 1960,1960,1960,1960,1960,1960,1960 EthDcrMiner64.exe -epool etc-au1.nanopool.org:19999 -ewal Walletaddressisnormallyhere/RIG/myemail@.com.au -epsw x -mode 1 -ftime 10 -di 0123456 -cvddc 930,930,930,930,930,930,930 -cclock 1150,1150,1150,1150,1150,1150,1150, -mvddc 930,930,930,930,930,930,930 -mclock 1960,1960,1960,1960,1960,1960,1960 EthDcrMiner64.exe -epool etc-au1.nanopool.org:19999 -ewal Walletaddressisnormallyhere/RIG/myemail@.com.au -epsw x -mode 1 -ftime 10 -di 0,1,2,3,4,5,6,7 -cvddc 930,930,930,930,930,930,930 -cclock 1150,1150,1150,1150,1150,1150,1150, -mvddc 930,930,930,930,930,930,930 -mclock 1960,1960,1960,1960,1960,1960,1960
Anyone got any ideas on why the clocks only work for the first card and not the rest
|
|
|
|
dinkydow
Newbie
Offline
Activity: 11
Merit: 0
|
|
February 24, 2018, 09:42:32 PM |
|
Awesome Miner, do I need to configure each mining rig with a pool? like rig 1 configure with eth and rig 2 again configure for eth? aslo my claymore keeps crashing
|
|
|
|
xodes777
Newbie
Offline
Activity: 3
Merit: 0
|
|
February 24, 2018, 10:28:37 PM |
|
Hi All! Recently upgrade my test rig to v11 but having issues with the following error currently running previous version across 14 cards without issue. Error happens with solo & dual mining Test rig card is a MSI RX470 8GB GPU0 t=62C fan=89% em hbt: 0, fm hbt: 78, watchdog - thread 0 (gpu0), hb time 78 watchdog - thread 1 (gpu0), hb time 16 WATCHDOG: GPU error, you need to restart miner Quit, please wait... Restarting OK, exit... Any suggestions as to what could be the issue? Thanks. is this a modded card? what is your clock settings? try to put/install GPU on PCIe x16 slot for the meantime since its a single test GPU card only, and try default clocks. I think it's Claymore v11.0 bug! many peaple have the same problem. Add "-wd 0" option in .bat file
|
|
|
|
Bigdrago
Newbie
Offline
Activity: 312
Merit: 0
|
|
February 24, 2018, 10:46:02 PM |
|
Hi.
I am using Nicehash (claymore is added as 3rd party, version 10.6. EthDcrMiner64.exe).
The problem is that the claymore miner seems to be restarting. The window closes and a new one starts. My rig is 13x amd radeon 570 gpu (only timestrap). (24.9 Mh/s, no modding on oc and undervolt etc).
What is MAX cool time exceeded. RESTARTING ?
|
|
|
|
Ratledge
Jr. Member
Offline
Activity: 84
Merit: 1
|
|
February 24, 2018, 11:18:30 PM |
|
Still having issues with the inbuilt overclocking, Doesn't seem to register with multiple cards
The 3 configs I have tried
EthDcrMiner64.exe -epool etc-au1.nanopool.org:19999 -ewal Walletaddressisnormallyhere/RIG/myemail@.com.au -epsw x -mode 1 -ftime 10 -cvddc 930,930,930,930,930,930,930 -cclock 1150,1150,1150,1150,1150,1150,1150, -mvddc 930,930,930,930,930,930,930 -mclock 1960,1960,1960,1960,1960,1960,1960 EthDcrMiner64.exe -epool etc-au1.nanopool.org:19999 -ewal Walletaddressisnormallyhere/RIG/myemail@.com.au -epsw x -mode 1 -ftime 10 -di 0123456 -cvddc 930,930,930,930,930,930,930 -cclock 1150,1150,1150,1150,1150,1150,1150, -mvddc 930,930,930,930,930,930,930 -mclock 1960,1960,1960,1960,1960,1960,1960 EthDcrMiner64.exe -epool etc-au1.nanopool.org:19999 -ewal Walletaddressisnormallyhere/RIG/myemail@.com.au -epsw x -mode 1 -ftime 10 -di 0,1,2,3,4,5,6,7 -cvddc 930,930,930,930,930,930,930 -cclock 1150,1150,1150,1150,1150,1150,1150, -mvddc 930,930,930,930,930,930,930 -mclock 1960,1960,1960,1960,1960,1960,1960
Anyone got any ideas on why the clocks only work for the first card and not the rest
Are they all AMD cards?
|
|
|
|
Victorio
|
|
February 24, 2018, 11:37:00 PM |
|
1060 w/3GB RAM should do about that, maybe 21Mh/s if you get things just right. My Gigabyte card likes 70% power limit, about +220 GPU speed offset and +1000 memory offset. Not all cards will do that, I have Hynix VRAM, also. Some might get a little more, but I don't know of any way to set the memory more than +1000 offset. My card will hold a stable +240 GPU, but I get crappy shares relative to what I get at +220. Every single card is just a little different unless they came out of the same batch, same model from the same maker.
I have never seen such high OC settings for 1060 with Hynix memory. What specific model do you have and do you have any clue about the manufacturing date? You can push the memory clock above +1000 MHz through Asus GPU Tweak (details: http://bit.ly/2GHtYma, use translator).
|
|
|
|
sexontoast
Newbie
Offline
Activity: 27
Merit: 1
|
|
February 24, 2018, 11:43:45 PM |
|
Still having issues with the inbuilt overclocking, Doesn't seem to register with multiple cards
The 3 configs I have tried
EthDcrMiner64.exe -epool etc-au1.nanopool.org:19999 -ewal Walletaddressisnormallyhere/RIG/myemail@.com.au -epsw x -mode 1 -ftime 10 -cvddc 930,930,930,930,930,930,930 -cclock 1150,1150,1150,1150,1150,1150,1150, -mvddc 930,930,930,930,930,930,930 -mclock 1960,1960,1960,1960,1960,1960,1960 EthDcrMiner64.exe -epool etc-au1.nanopool.org:19999 -ewal Walletaddressisnormallyhere/RIG/myemail@.com.au -epsw x -mode 1 -ftime 10 -di 0123456 -cvddc 930,930,930,930,930,930,930 -cclock 1150,1150,1150,1150,1150,1150,1150, -mvddc 930,930,930,930,930,930,930 -mclock 1960,1960,1960,1960,1960,1960,1960 EthDcrMiner64.exe -epool etc-au1.nanopool.org:19999 -ewal Walletaddressisnormallyhere/RIG/myemail@.com.au -epsw x -mode 1 -ftime 10 -di 0,1,2,3,4,5,6,7 -cvddc 930,930,930,930,930,930,930 -cclock 1150,1150,1150,1150,1150,1150,1150, -mvddc 930,930,930,930,930,930,930 -mclock 1960,1960,1960,1960,1960,1960,1960
Anyone got any ideas on why the clocks only work for the first card and not the rest
Are they all AMD cards? Yep all of the same type as well, RX580 4GB Saphire Pulse.
|
|
|
|
Ratledge
Jr. Member
Offline
Activity: 84
Merit: 1
|
|
February 24, 2018, 11:52:04 PM |
|
1060 w/3GB RAM should do about that, maybe 21Mh/s if you get things just right. My Gigabyte card likes 70% power limit, about +220 GPU speed offset and +1000 memory offset. Not all cards will do that, I have Hynix VRAM, also. Some might get a little more, but I don't know of any way to set the memory more than +1000 offset. My card will hold a stable +240 GPU, but I get crappy shares relative to what I get at +220. Every single card is just a little different unless they came out of the same batch, same model from the same maker.
I have never seen such high OC settings for 1060 with Hynix memory. What specific model do you have and do you have any clue about the manufacturing date? You can push the memory clock above +1000 MHz through Asus GPU Tweak (details: http://bit.ly/2GHtYma, use translator). Yep, I agree. I had a 3GB 1060 that went tits up, so I was looking for a reasonably priced replacment back around early December and was purposefully looking for a good OC'ing 6GB card. The one I picked had to fit in the tight spot the generic 3GB HP card came out of the Pavilion Power 580-023w I bought for $499 from Walmart around mid-October, since there's no extra room or spare slot, because I have a SoundBlaster SBX Pro "Z" in that rig. I selected the Gigabyte single fan "ICX" version, which is a good overclocker and a short slot (7,5" length) double wide jobbie. I patiently waited for the card to get under $300. Right now they are more like double that - when you can find one for sale. The one I picked was a good runner in the silicon lottery derby, and I can easily run +240 with graphics programs and test / benchmark programs, but while I had been running +220 this week, it's been getting a slightly lower hash rate. I just cut it back to +215 for now to see how it rides, and it's steady as a rock. Here's the new GPU-Z shot: and my "nVidia Inspector" settings: It rarely ever goes beyond 80C, but I have it opened up just in case it gets hotter during the summer. Right now it's steady on 78C bit it was 80C when I did the snapshot.
|
|
|
|
cryptoillusion1
Newbie
Offline
Activity: 82
Merit: 0
|
|
February 25, 2018, 01:15:30 AM |
|
Still having issues with the inbuilt overclocking, Doesn't seem to register with multiple cards
The 3 configs I have tried
EthDcrMiner64.exe -epool etc-au1.nanopool.org:19999 -ewal Walletaddressisnormallyhere/RIG/myemail@.com.au -epsw x -mode 1 -ftime 10 -cvddc 930,930,930,930,930,930,930 -cclock 1150,1150,1150,1150,1150,1150,1150, -mvddc 930,930,930,930,930,930,930 -mclock 1960,1960,1960,1960,1960,1960,1960 EthDcrMiner64.exe -epool etc-au1.nanopool.org:19999 -ewal Walletaddressisnormallyhere/RIG/myemail@.com.au -epsw x -mode 1 -ftime 10 -di 0123456 -cvddc 930,930,930,930,930,930,930 -cclock 1150,1150,1150,1150,1150,1150,1150, -mvddc 930,930,930,930,930,930,930 -mclock 1960,1960,1960,1960,1960,1960,1960 EthDcrMiner64.exe -epool etc-au1.nanopool.org:19999 -ewal Walletaddressisnormallyhere/RIG/myemail@.com.au -epsw x -mode 1 -ftime 10 -di 0,1,2,3,4,5,6,7 -cvddc 930,930,930,930,930,930,930 -cclock 1150,1150,1150,1150,1150,1150,1150, -mvddc 930,930,930,930,930,930,930 -mclock 1960,1960,1960,1960,1960,1960,1960
Anyone got any ideas on why the clocks only work for the first card and not the rest
Are they all AMD cards? Yep all of the same type as well, RX580 4GB Saphire Pulse. Remove the comma between 1150 and -mvddc
|
|
|
|
Ratledge
Jr. Member
Offline
Activity: 84
Merit: 1
|
|
February 25, 2018, 01:25:31 AM |
|
Still having issues with the inbuilt overclocking, Doesn't seem to register with multiple cards
The 3 configs I have tried
EthDcrMiner64.exe -epool etc-au1.nanopool.org:19999 -ewal Walletaddressisnormallyhere/RIG/myemail@.com.au -epsw x -mode 1 -ftime 10 -cvddc 930,930,930,930,930,930,930 -cclock 1150,1150,1150,1150,1150,1150,1150, -mvddc 930,930,930,930,930,930,930 -mclock 1960,1960,1960,1960,1960,1960,1960 EthDcrMiner64.exe -epool etc-au1.nanopool.org:19999 -ewal Walletaddressisnormallyhere/RIG/myemail@.com.au -epsw x -mode 1 -ftime 10 -di 0123456 -cvddc 930,930,930,930,930,930,930 -cclock 1150,1150,1150,1150,1150,1150,1150, -mvddc 930,930,930,930,930,930,930 -mclock 1960,1960,1960,1960,1960,1960,1960 EthDcrMiner64.exe -epool etc-au1.nanopool.org:19999 -ewal Walletaddressisnormallyhere/RIG/myemail@.com.au -epsw x -mode 1 -ftime 10 -di 0,1,2,3,4,5,6,7 -cvddc 930,930,930,930,930,930,930 -cclock 1150,1150,1150,1150,1150,1150,1150, -mvddc 930,930,930,930,930,930,930 -mclock 1960,1960,1960,1960,1960,1960,1960
Anyone got any ideas on why the clocks only work for the first card and not the rest
Are they all AMD cards? Yep all of the same type as well, RX580 4GB Saphire Pulse. Remove the comma between 1150 and -mvddc For sure, but since they are all being 'feed' identical parameters, seems easier to just use "-cvddc 930 -cclock 1150 -mvddc 930" instead of giving each of them separately. Unless they are different, really no reason to list them out like that. No need to count them out or change when you add another card (unless of course it needs different parametersa). My Sapphire RX 580 4GB Nitro+ goes just a little higher, but not much. The "-di" parameter works either with or without commas, #11, 12, 13, etc are "A", "B", "C", etc. (actually I don't remember if it is CaSe SeNsItIvE - probably not, I would guess).
|
|
|
|
Ruvv
Newbie
Offline
Activity: 5
Merit: 0
|
|
February 25, 2018, 03:46:18 AM |
|
how to write in dpools.txt coins with different algorithms and is it possible? For example, the main coin is kessak, and spare blake2s. The option: "DCOIN: blake2s" does not work, rejected share
|
|
|
|
kgminer
Jr. Member
Offline
Activity: 100
Merit: 6
|
|
February 25, 2018, 05:15:28 AM |
|
Hello Miners
version 11 crashes with the following error at random times. Do you have solution or troubleshooting steps?
`` 18:03:14:704 aa4 B2S: 02/25/18-18:03:14 - New job from s.antminepool.com:5766 18:03:14:704 aa4 target: 0x0000000015554000 (diff: 51GH) 18:03:15:579 19cc GPU 3, GpuMiner cu_k04 failed 4, unspecified launch failure 18:03:15:579 19cc GPU 3, GpuMiner kx failed 1 18:03:15:594 19cc Set global fail flag, failed GPU3 18:03:15:594 19cc GPU 3 failed
``` this is 7*1060 (ASUS strix gtx1060 O6G Gaming) rig with the latest drivers from asus website
OC settings Power 72% Core Clock -230 Memory Clock +670
|
|
|
|
kgminer
Jr. Member
Offline
Activity: 100
Merit: 6
|
|
February 25, 2018, 06:44:46 AM |
|
how to write in dpools.txt coins with different algorithms and is it possible? For example, the main coin is kessak, and spare blake2s. The option: "DCOIN: blake2s" does not work, rejected share
how to write in dpools.txt coins with different algorithms and is it possible? Short answer is not possible whatever coin you specified in the command line, dpools file can switch to that coin only.
|
|
|
|
techbabe
Newbie
Offline
Activity: 17
Merit: 0
|
|
February 25, 2018, 07:26:48 AM |
|
hi all just bought 11 gtx 1060 6gb Hynix memory they do max 20.xx eth and around 330 xvg 75w (gpu-z) shows that's best what I can get from them? never had any Nvidias cards will be nice if some one can help how to oc uv modd them thank you indeed
1060 w/3GB RAM should do about that, maybe 21Mh/s if you get things just right. My Gigabyte card likes 70% power limit, about +220 GPU speed offset and +1000 memory offset. Not all cards will do that, I have Hynix VRAM, also. Some might get a little more, but I don't know of any way to set the memory more than +1000 offset. My card will hold a stable +240 GPU, but I get crappy shares relative to what I get at +220. Every single card is just a little different unless they came out of the same batch, same model from the same maker. I have my temp max at 80C which is about what it does when I'm dual mining (and yes, about 350Mh/s for Verge / XVG is what I get, although you can tweak -dcri up to the best your card will do without impacting your ETH hashing much (I limit it to 1% impact) then you might be able to get 400+Mh/s but in my experience it messes things up and I get recycles way too often instead of it running the clock out (-r 239) at four hours, which is my self-imposed limit before I restart the miner. I was using -dcri 70 which seemed to be the sweet spot for intensity on my specific card. The other rig is a GTX1080 with RX 580's, all 8GB mostly Asus OC/ROG/Strix models with one Sapphire Nitro+ 580 OC. Some people insist on just letting it run forever, but my machines seem to grow a minds of their own after a few hours, so 4 hours is what I picked. For the GTX1060 memory ramped up to 10K speed, I build the DAG in between 8 and 9 seconds. No big woop... I am back to single mining ETH for now, I just get too darned squirrelly dual mining. You can not change the nVidia GPU BIOS for GTX10x0 cards, it's encrypted and won't boot if you mess with it (which is assuming you are truly a crypto genius and can figure out the encryption, which nobody else has - so far, anyway), so you are stuck with mods using AfterBurner or nVidiaInspector, etc because Claymore doesn't do memory tweaks for nVidia (or fans, temps or power limits) like it does for AMD cards. thank you mate that was good explain
|
|
|
|
Stevross
Newbie
Offline
Activity: 13
Merit: 0
|
|
February 25, 2018, 08:20:46 AM |
|
I have been getting detection of a virus backdoor in your software after installation. Trojan:Win32/CoinMiner!bit.
my hashrate has been jumping up and down so i contacted dwarfpool , They stated analysis has shown that my wallet has been changing to another in a backdoor in your mining software. i only mine ETH and I have not applied the no DEV fee option. Is there something we should know?
|
|
|
|
Deadly0
Newbie
Offline
Activity: 3
Merit: 0
|
|
February 25, 2018, 12:56:50 PM |
|
I have been getting detection of a virus backdoor in your software after installation. Trojan:Win32/CoinMiner!bit.
my hashrate has been jumping up and down so i contacted dwarfpool , They stated analysis has shown that my wallet has been changing to another in a backdoor in your mining software. i only mine ETH and I have not applied the no DEV fee option. Is there something we should know?
You should read about dev fee in readme or in the first massage. And ofcourse antivirus will detect CoinMiner because this program is a coin miner
|
|
|
|
Stevross
Newbie
Offline
Activity: 13
Merit: 0
|
|
February 25, 2018, 01:21:09 PM |
|
I have been getting detection of a virus backdoor in your software after installation. Trojan:Win32/CoinMiner!bit.
my hashrate has been jumping up and down so i contacted dwarfpool , They stated analysis has shown that my wallet has been changing to another in a backdoor in your mining software. i only mine ETH and I have not applied the no DEV fee option. Is there something we should know?
You should read about dev fee in readme or in the first massage. And ofcourse antivirus will detect CoinMiner because this program is a coin miner you should read my message before your post. I have NOT done the NO FEE OPTION. The positive from the virus detection does not always come up on every miner. do your homework mate. The experts at Dwarfpool clearly stated that my wallet has been replaced by another when dropping from 130mh's to 80'mh's. I am not new to mining and never had this problem before.
|
|
|
|
Vann
|
|
February 25, 2018, 01:54:04 PM |
|
That's how the Dev fee works. Claymore replaces your wallet with his and mines for 36 seconds every hour. You should have asked Dwarfpool the time and duration of when the wallets were switched and compared it to the miner logs.
|
|
|
|
Stevross
Newbie
Offline
Activity: 13
Merit: 0
|
|
February 25, 2018, 02:00:51 PM |
|
That's how the Dev fee works. Claymore replaces your wallet with his and mines for 36 seconds every hour. You should have asked Dwarfpool the time and duration of when the wallets were switched and compared it to the miner logs.
I know that is how the DEV fee works, However that is not the case as Claymore does not mine at 80mh's when he could mine at my full speed, Also when It is mining at that speed in the logs its not the DEV fee mining and the miner stops, then starts the DEV fee with his wallet.
|
|
|
|
|