matauc12
|
|
March 21, 2013, 01:08:12 PM |
|
so here i'm still with same probelm. i waited for more then 3 minutes.. (about a hour) and still saying [2013-03-20 16:18:18] Error -1: Getting Device IDs (num) you mentioned also this coed: 2013-03-20 16:18:21: Listener for "cgminer": .. this one i cant see there just that one above I also wanted to install that ADL library you send me link, but after i uzip it icant find any executable file.. there is just html, wuth some documentations about adl, not an 100% sure but it should open automatically if you have catalyst, if not you direct device manager driver update to that folder.
|
|
|
|
tacotime (OP)
Legendary
Offline
Activity: 1484
Merit: 1005
|
|
March 23, 2013, 09:46:27 PM |
|
so here i'm still with same probelm. i waited for more then 3 minutes.. (about a hour) and still saying [2013-03-20 16:18:18] Error -1: Getting Device IDs (num) you mentioned also this coed: 2013-03-20 16:18:21: Listener for "cgminer": .. this one i cant see there just that one above I also wanted to install that ADL library you send me link, but after i uzip it icant find any executable file.. there is just html, wuth some documentations Hm. When you run guiminer-scrypt, open the console, then go back to your cgminer tab and hit start. In the console you should see a command like: 2013-03-19 23:17:10: Running command: C:\guiminer\cgminer\cgminer.exe --scrypt -u user -p password -o stratum+tcp://ltcmine.ru:3333 --gpu-platform 1 -d 0 -w 256 -v 1 -I 14 -g 1 -l 1 -T --thread-concurrency 16000 Go into the windows command console (start --> type in cmd --> run cmd by clicking on it) and then copy and paste all the code after "C:\" (to paste into terminal, right click and select paste). Then at the end of the command, type "--debug" after "--thread-concurrency #####". Hit enter and let me know what you get for the output, it sounds like a problem with cgminer.
|
XMR: 44GBHzv6ZyQdJkjqZje6KLZ3xSyN1hBSFAnLP6EAqJtCRVzMzZmeXTC2AHKDS9aEDTRKmo6a6o9r9j86pYfhCWDkKjbtcns
|
|
|
Variant65
Newbie
Offline
Activity: 27
Merit: 0
|
|
March 24, 2013, 03:55:42 AM |
|
Hi from New Zealand, happy to be aboard this exiting project after lurking for a year or so. I have finally managed to get guiminer going but am not seeing my hashrate (currently 160kh/s) registering inside Coinotron. Also I am getting only stale/invalid shares (about 1 every 2-3 seconds) on the local app, the accepted amount stays at zero. I ran it for about an hour before giving up. I am using stratum through port 3333. Any suggestions please?
|
|
|
|
tacotime (OP)
Legendary
Offline
Activity: 1484
Merit: 1005
|
|
March 24, 2013, 04:03:23 AM |
|
Post what your card is and your settings, sounds like thread concurrency is too low
Edit: isn't port 3334 litecoin on coinotron?
|
XMR: 44GBHzv6ZyQdJkjqZje6KLZ3xSyN1hBSFAnLP6EAqJtCRVzMzZmeXTC2AHKDS9aEDTRKmo6a6o9r9j86pYfhCWDkKjbtcns
|
|
|
Variant65
Newbie
Offline
Activity: 27
Merit: 0
|
|
March 24, 2013, 04:07:16 AM |
|
HD6870, thread concurrency 6720, also I have tried setting the core clock down which increased the hashrate to 245k/hs I have read your core/memory thread too. thanks
|
|
|
|
Variant65
Newbie
Offline
Activity: 27
Merit: 0
|
|
March 24, 2013, 04:13:11 AM |
|
Aawesome! yes that was it, port 3334, how did I miss it. with intensity at 18 its running 300kh/s but making computer useless for anything else, will down the instensity. Very happy to be mining at last. Thanks for your extremely fast help. all the best
|
|
|
|
TheAce
Member
Offline
Activity: 89
Merit: 10
|
|
March 24, 2013, 07:21:40 PM |
|
so here i'm still with same probelm. i waited for more then 3 minutes.. (about a hour) and still saying [2013-03-20 16:18:18] Error -1: Getting Device IDs (num) you mentioned also this coed: 2013-03-20 16:18:21: Listener for "cgminer": .. this one i cant see there just that one above I also wanted to install that ADL library you send me link, but after i uzip it icant find any executable file.. there is just html, wuth some documentations Hm. When you run guiminer-scrypt, open the console, then go back to your cgminer tab and hit start. In the console you should see a command like: 2013-03-19 23:17:10: Running command: C:\guiminer\cgminer\cgminer.exe --scrypt -u user -p password -o stratum+tcp://ltcmine.ru:3333 --gpu-platform 1 -d 0 -w 256 -v 1 -I 14 -g 1 -l 1 -T --thread-concurrency 16000 Go into the windows command console (start --> type in cmd --> run cmd by clicking on it) and then copy and paste all the code after "C:\" (to paste into terminal, right click and select paste). Then at the end of the command, type "--debug" after "--thread-concurrency #####". Hit enter and let me know what you get for the output, it sounds like a problem with cgminer. Hi thanks for support, i wasnt at computer over weekend, i was working too much in offline mode.. so here is what i get after i didi what you say.
|
|
|
|
tacotime (OP)
Legendary
Offline
Activity: 1484
Merit: 1005
|
|
March 24, 2013, 08:48:03 PM |
|
Hi,
From the above the problem is with your credentials. Do you have a registered account at ltcmine.ru and worker credentials (-u user -p password should be your username and password for worker)?
|
XMR: 44GBHzv6ZyQdJkjqZje6KLZ3xSyN1hBSFAnLP6EAqJtCRVzMzZmeXTC2AHKDS9aEDTRKmo6a6o9r9j86pYfhCWDkKjbtcns
|
|
|
TheAce
Member
Offline
Activity: 89
Merit: 10
|
|
March 24, 2013, 11:38:12 PM |
|
no i'm registered in www.litecoinpool.org . and my credentials i'm entering in guiminer like this
|
|
|
|
tacotime (OP)
Legendary
Offline
Activity: 1484
Merit: 1005
|
|
March 25, 2013, 12:05:33 AM |
|
Okay. For some reason those are all default settings entered for user, password, host, and port. Can you select File --> Save in guiminer and then dump the contents of C:\Users\you\AppData\Roaming\poclbm\poclbm_scrypt.ini here? You can remove your miner passwords if they are saved there
|
XMR: 44GBHzv6ZyQdJkjqZje6KLZ3xSyN1hBSFAnLP6EAqJtCRVzMzZmeXTC2AHKDS9aEDTRKmo6a6o9r9j86pYfhCWDkKjbtcns
|
|
|
TheAce
Member
Offline
Activity: 89
Merit: 10
|
|
March 25, 2013, 01:38:37 AM |
|
ok, again done what you say and here is what i see
|
|
|
|
TheAce
Member
Offline
Activity: 89
Merit: 10
|
|
March 25, 2013, 01:49:36 PM |
|
hey tacotime, i'm goying to donate you some, after you help me run guiminer. this is really great support so far.. much more than i was epecting, thanks.
|
|
|
|
tacotime (OP)
Legendary
Offline
Activity: 1484
Merit: 1005
|
|
March 26, 2013, 01:50:18 AM |
|
Thank you!! I can't see the output of your poclbm-scrypt.ini file above, you might want to try posting it with the [/code] tags
|
XMR: 44GBHzv6ZyQdJkjqZje6KLZ3xSyN1hBSFAnLP6EAqJtCRVzMzZmeXTC2AHKDS9aEDTRKmo6a6o9r9j86pYfhCWDkKjbtcns
|
|
|
TheAce
Member
Offline
Activity: 89
Merit: 10
|
|
March 26, 2013, 11:22:03 AM |
|
[quote author=tacotime link=topic=150331.msg1677027#msg1677027 date=1364262618] Thank you!! :)
I can't see the output of your poclbm-scrypt.ini file above, you might want to try posting it with the [code][code] [/code] tags [/quote] I'm afraid that i dont understand.. where i have ti put that [/code]? Imagine that im really not so technical, so i need to know exact steps
|
|
|
|
tacotime (OP)
Legendary
Offline
Activity: 1484
Merit: 1005
|
|
March 26, 2013, 05:17:52 PM |
|
Hi,
I meant to dump the contents of scrypt-poclbm.ini between a bracketed "code" and "/code" in your post (just put brackets around those), I can't see anything in the post you gave above.
|
XMR: 44GBHzv6ZyQdJkjqZje6KLZ3xSyN1hBSFAnLP6EAqJtCRVzMzZmeXTC2AHKDS9aEDTRKmo6a6o9r9j86pYfhCWDkKjbtcns
|
|
|
TheAce
Member
Offline
Activity: 89
Merit: 10
|
|
March 27, 2013, 09:55:26 PM |
|
Yep, hope i understand you right, here it is . { "profiles": [ { "username": "EsoRimr.lite", "vectors": "1", "external_path": "CGMINER", "intensity": "16", "gputhreads": "1", "thrcon": "8000", "device": 2, "password": "xxxx", "port": "8332", "balance_auth_token": "", "worksize": "256", "name": "Default", "hostname": "litecoinpool.org", "affinity_mask": 1, "flags": "--no-adl", "autostart": false, "stratum": "No" } ], "bitcoin_executable": "C:\\Program Files\\Bitcoin\\bitcoin-qt.exe", "show_console": false, "show_summary": false, "show_opencl_warning": true, "console_max_lines": 5000, "start_minimized": false, "blockchain_directory": "C:\\Users\\nobody\\AppData\\Roaming\\Bitcoin", "window_position": [ 406, 126, 508, 380 ] }
|
|
|
|
GPK260
Member
Offline
Activity: 94
Merit: 10
|
|
March 28, 2013, 11:37:03 PM |
|
Just wanted to say thanks, Great little program love it
|
Freicoin Donations: 13dvY6AStLLSJ9VEKTSJDYkzWdgeGeyE6q Bitcoin Donations: 1BkLCL6teSx1CRwT8yn7Qrv8hvVinuUKZx UK Police Fraud Crime number opened against Black Arrow: NFRC141000810656
|
|
|
TheAce
Member
Offline
Activity: 89
Merit: 10
|
|
March 29, 2013, 08:53:25 AM |
|
Hi,
I meant to dump the contents of scrypt-poclbm.ini between a bracketed "code" and "/code" in your post (just put brackets around those), I can't see anything in the post you gave above.
Hi tacotime, any new advice for me? I understand you'r bussy, but i'd like to mine litecoins, before lot of gpu miners jump into it and difficulity will grow.. So please help me run this guiminer
|
|
|
|
tacotime (OP)
Legendary
Offline
Activity: 1484
Merit: 1005
|
|
March 29, 2013, 03:47:11 PM |
|
Sorry, it slipped my mind. It's starting to look like a driver side issue. What version of windows are you running, what AMD Driver version, and what AMD APP SDK version? Also what card and motherboard are you running?
|
XMR: 44GBHzv6ZyQdJkjqZje6KLZ3xSyN1hBSFAnLP6EAqJtCRVzMzZmeXTC2AHKDS9aEDTRKmo6a6o9r9j86pYfhCWDkKjbtcns
|
|
|
TheAce
Member
Offline
Activity: 89
Merit: 10
|
|
March 30, 2013, 06:00:32 PM |
|
Sorry, it slipped my mind. It's starting to look like a driver side issue. What version of windows are you running, what AMD Driver version, and what AMD APP SDK version? Also what card and motherboard are you running?
Ok, so windows are Win7 version 6.1 (compilation 7601: service pack1) AMD driver version i found only ATI grafic driver here is picture from my catalyst http://www.2i.cz/d19f1c36e5there you can also see that AMD APP SDK Motherboard is asus p5q-e http://www.asus.com/Motherboards/P5QE/And graphic card is ATI Radeon HD4800 Series
|
|
|
|
|