Mrpumperitis
Legendary
Offline
Activity: 2758
Merit: 1075
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2016, 07:45:08 PM |
|
BTCE
Latest news: 27/07/16 Ethereum Classic
Ethereum Classic
27.07.16 19:52 from admin Dear Clients!
BTC-e’s official standpoint on this issue is as follows: Ethereum Classic in the current circumstances is a scam. The Ethereum community decided to implement the hardfork in order to switch to the new chain. All major pools and exchanges (including BTC-e) did exactly that.
On the second day after the start of ETC trading BTC-e received a notification from Poloniex, saying that we need to secure the ETCs in our ETH wallet. At the time of notification, most of these coins have already been sent to Poloniex by our users. So there were almost none of these coins in our wallet.
We continue to receive requests from our customers demanding to return the ETCs that are supposedly deposited in our ETH wallet. We cannot do that for the reason specified above.
Anyone, who purports that we sent the coins to Poloniex in order to sell them, can check all the transactions on blockchain. All transactions are recorded and it is easy to trace the sender and the volumes of coins sent.
Best Regards, BTC-e Team
|
Bitcoin - Blockchain 1.0 (2009) Ethereum - Blockchain 2.0 (2015) Partisia - Blockchain 3.0 (2021)
|
|
|
|
bitpop (OP)
Legendary
Offline
Activity: 2912
Merit: 1060
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2016, 07:46:44 PM |
|
Could someone provide some info regarding running an ETC node.
What is the best way to set it up and how much resources does it consume on average (cpu, ram...).
Edit: For a headless linux server.
3,9 % CPU of 1 Core and 1050 MB Ram (with 512 MB Cache) but this node also a pool node. A standalone node without mining would use 1 - 2 % CPU of 1 Core Could you or someone else give a short guide on how to set up a node only in cli? No gui, no wallet. I must say I am confused what exactly I need (mist, geth...?) I'm trying to setup cli too with https://github.com/ethereumproject/go-ethereum/releasesBut I can't figure out how to make it run in the background. My bitcoin node runs great and I can use bitcoin-cli to talk to it. I don't know how to do that in geth Join https://www.reddit.com/r/EthereumClassic/comments/4uwjad/1410_first_stable_release_of_the_ethereum_classic/ wait... you want to be leading the fork and you don't know this??? My role is this thread
|
|
|
|
bitpop (OP)
Legendary
Offline
Activity: 2912
Merit: 1060
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2016, 07:47:23 PM |
|
Could someone provide some info regarding running an ETC node.
What is the best way to set it up and how much resources does it consume on average (cpu, ram...).
Edit: For a headless linux server.
3,9 % CPU of 1 Core and 1050 MB Ram (with 512 MB Cache) but this node also a pool node. A standalone node without mining would use 1 - 2 % CPU of 1 Core Could you or someone else give a short guide on how to set up a node only in cli? No gui, no wallet. I must say I am confused what exactly I need (mist, geth...?) I'm trying to setup cli too with https://github.com/ethereumproject/go-ethereum/releasesBut I can't figure out how to make it run in the background. My bitcoin node runs great and I can use bitcoin-cli to talk to it. I don't know how to do that in geth Join https://www.reddit.com/r/EthereumClassic/comments/4uwjad/1410_first_stable_release_of_the_ethereum_classic/ geth hasn't the daemon function you could use an upstart script like that : # geth - Ethereum Classic # filename gethetc.conf description "geth instance for Ethereum Classic"
env DAEMON=/home/<user>/<path to geth-binary> env PARAM=' --fast --oppose-dao-fork' env NAME=gethethclassic
start on filesystem or runlevel [2345] stop on runlevel [!2345]
setuid <user> setgid <user>
kill signal INT
respawn respawn limit 10 5 umask 022
pre-start script test -x $DAEMON || { stop; exit 0; } end script
# Start script #test -f /etc/default/$NAME && . /etc/default/$NAME exec $DAEMON $PARAM end script
change <user> to the userid that should run geth change <path to geth> to path where geth is located copy file with sudo cp gethetc.conf /etc/init/ now you could run start gethetc stop gethetc restart gethetc to monitor you could tailf /var/log/upstart/gethetc.log (STRG + c to cancel logfile view) or you could run under same user like geth geth attach or you use screen first install it sudo apt-get install screen screen -S gethetc # this will start a second session could leave it with STRG A and the D while STRG keeped pressed to reconnect to screen session screen -r gethetc thats it Thanks
|
|
|
|
LeChuckDE
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2016, 07:47:46 PM |
|
BTCE
Latest news: 27/07/16 Ethereum Classic
Ethereum Classic
27.07.16 19:52 from admin Dear Clients!
BTC-e’s official standpoint on this issue is as follows: Ethereum Classic in the current circumstances is a scam. The Ethereum community decided to implement the hardfork in order to switch to the new chain. All major pools and exchanges (including BTC-e) did exactly that.
On the second day after the start of ETC trading BTC-e received a notification from Poloniex, saying that we need to secure the ETCs in our ETH wallet. At the time of notification, most of these coins have already been sent to Poloniex by our users. So there were almost none of these coins in our wallet.
We continue to receive requests from our customers demanding to return the ETCs that are supposedly deposited in our ETH wallet. We cannot do that for the reason specified above.
Anyone, who purports that we sent the coins to Poloniex in order to sell them, can check all the transactions on blockchain. All transactions are recorded and it is easy to trace the sender and the volumes of coins sent.
Best Regards, BTC-e Team
who the f... is btc-e ? let them cry ... ETC will get over ETH
|
|
|
|
bitpop (OP)
Legendary
Offline
Activity: 2912
Merit: 1060
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2016, 07:51:24 PM |
|
BTCE
Latest news: 27/07/16 Ethereum Classic
Ethereum Classic
27.07.16 19:52 from admin Dear Clients!
BTC-e’s official standpoint on this issue is as follows: Ethereum Classic in the current circumstances is a scam. The Ethereum community decided to implement the hardfork in order to switch to the new chain. All major pools and exchanges (including BTC-e) did exactly that.
On the second day after the start of ETC trading BTC-e received a notification from Poloniex, saying that we need to secure the ETCs in our ETH wallet. At the time of notification, most of these coins have already been sent to Poloniex by our users. So there were almost none of these coins in our wallet.
We continue to receive requests from our customers demanding to return the ETCs that are supposedly deposited in our ETH wallet. We cannot do that for the reason specified above.
Anyone, who purports that we sent the coins to Poloniex in order to sell them, can check all the transactions on blockchain. All transactions are recorded and it is easy to trace the sender and the volumes of coins sent.
Best Regards, BTC-e Team
That's disgusting. So they lost them and we're the scam? The scam was vitalik selling premined eth for 36,000 btc then forking out immutability. That was false advertising.
|
|
|
|
suchmoon
Legendary
Offline
Activity: 3780
Merit: 9009
https://bpip.org
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2016, 07:54:04 PM |
|
BTCE
Latest news: 27/07/16 Ethereum Classic
Ethereum Classic
27.07.16 19:52 from admin Dear Clients!
BTC-e’s official standpoint on this issue is as follows: Ethereum Classic in the current circumstances is a scam. The Ethereum community decided to implement the hardfork in order to switch to the new chain. All major pools and exchanges (including BTC-e) did exactly that.
On the second day after the start of ETC trading BTC-e received a notification from Poloniex, saying that we need to secure the ETCs in our ETH wallet. At the time of notification, most of these coins have already been sent to Poloniex by our users. So there were almost none of these coins in our wallet.
We continue to receive requests from our customers demanding to return the ETCs that are supposedly deposited in our ETH wallet. We cannot do that for the reason specified above.
Anyone, who purports that we sent the coins to Poloniex in order to sell them, can check all the transactions on blockchain. All transactions are recorded and it is easy to trace the sender and the volumes of coins sent.
Best Regards, BTC-e Team
Looks like they failed to split the coins before allowing users to withdraw. Not sure how that makes ETC a scam, but it does make BTC-e incompetent. They probably want to avoid their responsibility to credit ETC to pre-fork ETH holders.
|
|
|
|
Fatman3001
Legendary
Offline
Activity: 1526
Merit: 1013
Make Bitcoin glow with ENIAC
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2016, 08:04:07 PM |
|
BTCE
Latest news: 27/07/16 Ethereum Classic
Ethereum Classic
27.07.16 19:52 from admin Dear Clients!
BTC-e’s official standpoint on this issue is as follows: Ethereum Classic in the current circumstances is a scam. The Ethereum community decided to implement the hardfork in order to switch to the new chain. All major pools and exchanges (including BTC-e) did exactly that.
On the second day after the start of ETC trading BTC-e received a notification from Poloniex, saying that we need to secure the ETCs in our ETH wallet. At the time of notification, most of these coins have already been sent to Poloniex by our users. So there were almost none of these coins in our wallet.
We continue to receive requests from our customers demanding to return the ETCs that are supposedly deposited in our ETH wallet. We cannot do that for the reason specified above.
Anyone, who purports that we sent the coins to Poloniex in order to sell them, can check all the transactions on blockchain. All transactions are recorded and it is easy to trace the sender and the volumes of coins sent.
Best Regards, BTC-e Team
That's disgusting. So they lost them and we're the scam? The scam was vitalik selling premined eth for 36,000 btc then forking out immutability. That was false advertising. Take some friggin responsibility! Why didn't YOU contact BTC-E??? Is this the "Whine About Vitalik" Coin?
|
"I predict the Internet will soon go spectacularly supernova and in 1996 catastrophically collapse." - Robert Metcalfe, 1995
|
|
|
|
krile
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2016, 08:13:47 PM |
|
Could someone provide some info regarding running an ETC node.
What is the best way to set it up and how much resources does it consume on average (cpu, ram...).
Edit: For a headless linux server.
3,9 % CPU of 1 Core and 1050 MB Ram (with 512 MB Cache) but this node also a pool node. A standalone node without mining would use 1 - 2 % CPU of 1 Core Could you or someone else give a short guide on how to set up a node only in cli? No gui, no wallet. I must say I am confused what exactly I need (mist, geth...?) I'm trying to setup cli too with https://github.com/ethereumproject/go-ethereum/releasesBut I can't figure out how to make it run in the background. My bitcoin node runs great and I can use bitcoin-cli to talk to it. I don't know how to do that in geth Join https://www.reddit.com/r/EthereumClassic/comments/4uwjad/1410_first_stable_release_of_the_ethereum_classic/ That is why I avoided Ethereum for all this time, so annoying to set up ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) I will try harder now for ETC
|
|
|
|
flowerpots
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2016, 08:16:46 PM |
|
I have some Ether from before the fork. I use https://www.myetherwallet.com. I can download the JSON file there. But how can I use it with my wallet? I have installed the wallet and clicked NO, so i'm on the correct fork. I tried to edit the current wallet-file and put the data of the downloaded JSON from myetherwallet.com in there. After that I can see my balance, but I can't send ETC. It gives an error. Something with version 2 of the wallet and it needs to be version 3. Anyone can help me out?
|
|
|
|
bitpop (OP)
Legendary
Offline
Activity: 2912
Merit: 1060
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2016, 08:22:14 PM |
|
I have some Ether from before the fork. I use https://www.myetherwallet.com. I can download the JSON file there. But how can I use it with my wallet? I have installed the wallet and clicked NO, so i'm on the correct fork. I tried to edit the current wallet-file and put the data of the downloaded JSON from myetherwallet.com in there. After that I can see my balance, but I can't send ETC. It gives an error. Something with version 2 of the wallet and it needs to be version 3. Anyone can help me out? Maybe try https://elaineo.github.io/etherwallet/
|
|
|
|
krile
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2016, 08:25:11 PM |
|
I have some Ether from before the fork. I use https://www.myetherwallet.com. I can download the JSON file there. But how can I use it with my wallet? I have installed the wallet and clicked NO, so i'm on the correct fork. I tried to edit the current wallet-file and put the data of the downloaded JSON from myetherwallet.com in there. After that I can see my balance, but I can't send ETC. It gives an error. Something with version 2 of the wallet and it needs to be version 3. Anyone can help me out? You could try opening the file with a text editor and edit the version number from 2 to 3. Or inspect what the changes are between the two versions and copy/paste the values that matter (address, keys...) to the other file so it fits the version 3 format.
|
|
|
|
ShooterXD
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2016, 08:27:39 PM |
|
someone can help me? i want rent a miner on nicehash to mine etc.
pm with instructions. i dont know nothing.
i want know how best algo, how much speed i need...
thx
|
|
|
|
flowerpots
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2016, 08:36:32 PM |
|
I have some Ether from before the fork. I use https://www.myetherwallet.com. I can download the JSON file there. But how can I use it with my wallet? I have installed the wallet and clicked NO, so i'm on the correct fork. I tried to edit the current wallet-file and put the data of the downloaded JSON from myetherwallet.com in there. After that I can see my balance, but I can't send ETC. It gives an error. Something with version 2 of the wallet and it needs to be version 3. Anyone can help me out? Maybe try https://elaineo.github.io/etherwallet/Thanks, this'll work.
|
|
|
|
LeChuckDE
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2016, 08:44:12 PM |
|
someone can help me? i want rent a miner on nicehash to mine etc.
pm with instructions. i dont know nothing.
i want know how best algo, how much speed i need...
thx
2nd link http://bfy.tw/6xgL
|
|
|
|
husky1971
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2016, 09:08:38 PM |
|
is it true that ETC coin supply is more less coins than ETH. after the fork (block 1920000) the wallet holders with coins have only ETH and not ETC. the account holders on exchange have both ETH and ETC. So i was thinking there is more ETH coins than ETC.
|
|
|
|
paulc010
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 92
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2016, 09:19:51 PM |
|
is it true that ETC coin supply is more less coins than ETH. after the fork (block 1920000) the wallet holders with coins have only ETH and not ETC. the account holders on exchange have both ETH and ETC. So i was thinking there is more ETH coins than ETC.
EDIT: Think I misunderstood. The ETH chain is a higher block number, so yes, there's more ETH than ETC.
|
|
|
|
flowerpots
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2016, 09:22:47 PM |
|
I have some Ether from before the fork. I use https://www.myetherwallet.com. I can download the JSON file there. But how can I use it with my wallet? I have installed the wallet and clicked NO, so i'm on the correct fork. I tried to edit the current wallet-file and put the data of the downloaded JSON from myetherwallet.com in there. After that I can see my balance, but I can't send ETC. It gives an error. Something with version 2 of the wallet and it needs to be version 3. Anyone can help me out? Maybe try https://elaineo.github.io/etherwallet/Thanks, this'll work. Strange. I tried to send 1 ETC to my main account (Ether Base) in my Windows 10 Software wallet. I see on classicetherwallet.com that I have 1 ETC less than before, but it does not show up in my wallet. Also it does not show up on http://gastracker.io/. When I create another wallet on classicetherwallet.com and I send something to that wallet it does show up there (but not on gastracker). Anyone knows what's up? I did use the Replay protection-sending option.
|
|
|
|
yefi
Legendary
Offline
Activity: 2842
Merit: 1511
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 28, 2016, 09:45:57 PM |
|
BTC-e’s official standpoint on this issue is as follows: Ethereum Classic in the current circumstances is a scam.
Who is BTC-e's CEO? Oh, that's right, nobody knows. (And to pre-empt the Satoshi argument I see coming, people did not invest their money in him but in transparent code.)
|
|
|
|
|