Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[ocminer]

Miner will not work for me at all! Help!

GPU0: R9 280x
GPU1: RX 480
GPU2: R9 380x

Code:

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal molitar.miner1 -zpsw pass1 -allpools 1 -di 1

Looks like you're being retarget slightly too high from the pool, just wait about 1 minute and you should automatically be targeted down again.

Alternatively you can always set your own diff through the password field like so:

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal molitar.miner1 -zpsw d=128 -allpools 1 -di 1

Which would give you a diff of 128

or

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal molitar.miner1 -zpsw d=256 -allpools 1 -di 1


A diff of 256

Ok here is a screenshot after running about 3 minutes after starting no change.



It is not moving.

Than I decided to press <Enter> and it says this.

It basically said but would not copy and paste that miner thread hung and restarting.  What should I set target difficulty for these 3 cards realistically?

Currently it's nuts.. I definitely need to lock it at a rate..

Pool sets new share target: 0x0067b1a6 (diff: 632H)
ZEC: 11/05/16-12:20:18 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 114.582 H/s, Total Shares: 22, Rejected: 0, Time: 00:02
ZEC: GPU0 40.628 H/s, GPU1 42.777 H/s, GPU2 31.177 H/s
ZEC: 11/05/16-12:20:23 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (141 ms)!
ZEC: 11/05/16-12:20:25 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (140 ms)!
ZEC: 11/05/16-12:20:27 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (140 ms)!
GPU0 t=59C fan=34%, GPU1 t=55C fan=68%, GPU2 t=61C fan=52%
Pool sets new share target: 0x00212e9b (diff: 1975H)
ZEC: 11/05/16-12:20:39 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 110.445 H/s, Total Shares: 25, Rejected: 0, Time: 00:02
ZEC: GPU0 39.496 H/s, GPU1 41.310 H/s, GPU2 29.640 H/s
ZEC: 11/05/16-12:20:44 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (141 ms)!
Pool sets new share target: 0x000f7c26 (diff: 4232H)
ZEC: 11/05/16-12:20:46 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 113.816 H/s, Total Shares: 26, Rejected: 0, Time: 00:02
ZEC: GPU0 41.130 H/s, GPU1 42.008 H/s, GPU2 30.677 H/s
GPU0 t=60C fan=35%, GPU1 t=56C fan=68%, GPU2 t=61C fan=52%
ZEC: 11/05/16-12:21:06 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (140 ms)!
Pool sets new share target: 0x0016b616 (diff: 2885H)
ZEC: 11/05/16-12:21:10 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 115.899 H/s, Total Shares: 27, Rejected: 0, Time: 00:03
ZEC: GPU0 41.688 H/s, GPU1 42.961 H/s, GPU2 31.249 H/s

[/quote]


Could you check your hashrate in -> Edit Account -> My Workers ?

Maybe the Dashboard is not updating

[1714816203]

1714816203

[1714816203]

1714816203

[1714816203]

1714816203

[1714816203]

1714816203

[IOTUSA]

LINUXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX?

Don't release Linux. It's just bad for all except chinese farms.

[LM3]

LINUX PLEASE!!!

[eXtatiC]

LINUXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX?

Don't release Linux. It's just bad for all except chinese farms.

Why releasing linux version will be good for chinese farms?

[molitar]

OCMiner.  Yes it maybe a refreshing issue.  I stopped all miners and even after hitting update workers several times it still has not gone down to 0 H/s.  I'll keep updating to it's showing no H/s than will try again.



And that is after about 3-5 minutes.  It still thinks it is seeing some minor hashing. Does not appear to be refreshing/updating properly at all.

[OZR]

Hello, All  

RIG Config:

6x Sapphire Radeon RX470 Nitro+
Asrock PRO BTC H81
Intel Celeron G1840
16 GB DDR3
SSD 128mb
Corsair AX1200i

Windows Server 2012 R2
All environment variables is set.

I'am can start Claymore's ZCash AMD GPU Miner if connect 4 GPU. It is ok & works very well.
If I add 5 or 6 GPU. Miner is froze at log:

Code:

14:09:35:775	b14	Main ZCash pool is zec.suprnova.cc:2142
14:09:36:462	b14	OpenCL platform: AMD Accelerated Parallel Processing
14:09:36:462	b14	OpenCL initializing...

14:09:36:462	b14	AMD Cards available: 6 
14:09:36:462	b14	GPU #0: Ellesmere, 8192 MB available, 32 compute units
14:09:36:462	b14	GPU #1: Ellesmere, 8192 MB available, 32 compute units
14:09:36:462	b14	GPU #2: Ellesmere, 8192 MB available, 32 compute units
14:09:36:462	b14	GPU #3: Ellesmere, 8192 MB available, 32 compute units
14:09:36:462	b14	GPU #4: Ellesmere, 8192 MB available, 32 compute units
14:09:36:462	b14	GPU #5: Ellesmere, 8192 MB available, 32 compute units
14:09:36:462	b14	POOL/SOLO version
14:09:36:462	b14	b100 
14:09:36:462	b14	Platform: Windows
14:09:36:494	b14	start building OpenCL program...
14:09:59:260	b14	done
14:09:59:276	b14	Total cards: 6 

This may be at hour and more time and never started. 6x GPU Mod was installed. Any other alghoritms excellent works at 6x GPU.

What can I do to run 6 cards? Thx.

-----
P.s. Claymore, thx. Very good miner. Excellent job

[amirheavy666]

I give 50 H/s with R9 390x and 30 Mh/z with R9 280x and 40 M/H with R9 380 in nanopool.... !!!
that's great  

is any pool will better it?

[molitar]

Ok waiting to all showed 0 H/s on Suprnova took about 10+ minutes and restarting my hashing is not stalling.

AMD Cards available: 3
GPU #0: Tahiti, 3072 MB available, 32 compute units
GPU #0 recognized as Radeon 280X/380X
GPU #1: Ellesmere, 8192 MB available, 36 compute units
GPU #1 recognized as Radeon RX 480
GPU #2: Tonga, 4096 MB available, 32 compute units
POOL/SOLO version
Total cards: 3

One question though why is my XFX R9 380X not recognized by the miner?  Is that why it is only getting only around 33 H/s while the R9 280X is getting 40 H/s?

Code:

Pool sets new share target: 0x0016f260 (diff: 2856H)
ZEC: 11/05/16-12:59:59 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 115.139 H/s, Total Shares: 48, Rejected: 0, Time: 00:02
ZEC: GPU0 40.982 H/s, GPU1 40.924 H/s, GPU2 33.233 H/s
ZEC: 11/05/16-13:00:02 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (124 ms)!
ZEC: 11/05/16-13:00:02 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 113.914 H/s, Total Shares: 49, Rejected: 0, Time: 00:02
ZEC: GPU0 39.532 H/s, GPU1 41.256 H/s, GPU2 33.126 H/s

Pool sets new share target: 0x0016f260 (diff: 2856H)
ZEC: 11/05/16-12:59:59 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 115.139 H/s, Total Shares: 48, Rejected: 0, Time: 00:02
ZEC: GPU0 40.982 H/s, GPU1 40.924 H/s, GPU2 33.233 H/s
ZEC: 11/05/16-13:00:02 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (124 ms)!
ZEC: 11/05/16-13:00:02 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 113.914 H/s, Total Shares: 49, Rejected: 0, Time: 00:02
ZEC: GPU0 39.532 H/s, GPU1 41.256 H/s, GPU2 33.126 H/s
ZEC: 11/05/16-13:00:18 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (140 ms)!
GPU0 t=58C fan=33%, GPU1 t=54C fan=68%, GPU2 t=60C fan=51%
GPU0 t=59C fan=34%, GPU1 t=55C fan=68%, GPU2 t=60C fan=51%
Pool sets new share target: 0x000f4c40 (diff: 4284H)
ZEC: 11/05/16-13:01:04 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 114.501 H/s, Total Shares: 50, Rejected: 0, Time: 00:03
ZEC: GPU0 40.673 H/s, GPU1 43.028 H/s, GPU2 30.800 H/s
GPU0 t=60C fan=35%, GPU1 t=56C fan=68%, GPU2 t=61C fan=52%
GPU0 t=61C fan=36%, GPU1 t=56C fan=68%, GPU2 t=61C fan=52%
ZEC: 11/05/16-13:01:55 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (125 ms)!
GPU0 t=61C fan=36%, GPU1 t=57C fan=68%, GPU2 t=61C fan=52%

It still wants to set difficulty too high I'll see if it stabilizes but I have no idea if it does not what I should set it to.

[rawbert]

Claymore, first of all thanks for the great miner!

I have this one issue though and I'm not the only one as I can see in this thread others report it too.
The miner and ethman shows temp/fan only for one card, GPU0.
I got 4 rigs with 6 cards each RX470/480s Win 10 Pro 64bit, latest crimson drivers.

I had this same issue with your eth dual miner too, with older drivers too.
Every now and then it shows all 6 cards after a reboot but most of the time it doesn't.

[elzium]

Set and forget. 24h run, no problems.

Claymore, can u set "disable crossfire" by default?

[Claymore]

v1.1:

- added Linux version.
- fixed issue with rejected shares after devfee mining.
- remove "-allpools 1" option if you use it and mine on miningpoolhub, suprnova, coinmine or nicehash pools.
- added "XnSub" support for Nicehash.
- fixed bugs.

PS. Read OP or Readme for updated samples of using on different pools.

[KREION]

Guys if I want to set my miners to auto restart every 60 minutes how and where I'm supposed to use the -r command?
On my start.bat or my config file?

[hypercrypto]

v1.1:

- added Linux version.
- fixed issue with rejected shares after devfee mining.
- remove "-allpools 1" option if you use it and mine on miningpoolhub, suprnova, coinmine or nicehash pools.
- added "XnSub" support for Nicehash.
- fixed bugs.

PS. Read OP or Readme for updated samples of using on different pools.

Thanks 

[kinchotio]

v1.1:

- added Linux version.
- fixed issue with rejected shares after devfee mining.
- remove "-allpools 1" option if you use it and mine on miningpoolhub, suprnova, coinmine or nicehash pools.
- added "XnSub" support for Nicehash.
- fixed bugs.

PS. Read OP or Readme for updated samples of using on different pools.

Thank you!! 

[sorry2xs]

Thanks downloaded and up and running  
Edit: Winblows 10 64 bit 

[NameTaken]

Just got 1.1 Linux version running under Debian stable and the miner reporting 40-45 H/s with 280Xs.

[hypercrypto]

I have got 45-48 sapphire oc rx 470 4gb

[MyEternity]

Claymore, what about combined CPU mining of ZCash?

[Tbone5660]

Does v1.1 offer any performance improvements over v1.0 for the RX480?

[adaseb]

v1.1:

- added Linux version.
- fixed issue with rejected shares after devfee mining.
- remove "-allpools 1" option if you use it and mine on miningpoolhub, suprnova, coinmine or nicehash pools.
- added "XnSub" support for Nicehash.
- fixed bugs.

PS. Read OP or Readme for updated samples of using on different pools.

Whoa! You must of not gotten any sleep to do all that work in the last 24 hours.