ocminer
Legendary
Offline
Activity: 2674
Merit: 1240
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2016, 04:39:19 PM |
|
Miner will not work for me at all! Help! GPU0: R9 280x GPU1: RX 480 GPU2: R9 380x ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal molitar.miner1 -zpsw pass1 -allpools 1 -di 1 Looks like you're being retarget slightly too high from the pool, just wait about 1 minute and you should automatically be targeted down again.
Alternatively you can always set your own diff through the password field like so:
ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal molitar.miner1 -zpsw d=128 -allpools 1 -di 1
Which would give you a diff of 128
or
ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal molitar.miner1 -zpsw d=256 -allpools 1 -di 1
A diff of 256
Ok here is a screenshot after running about 3 minutes after starting no change. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FZKF9pBi.png&t=665&c=bxxZJXBbn124bA) It is not moving. Than I decided to press <Enter> and it says this. It basically said but would not copy and paste that miner thread hung and restarting. What should I set target difficulty for these 3 cards realistically? Currently it's nuts.. I definitely need to lock it at a rate.. Pool sets new share target: 0x0067b1a6 (diff: 632H) ZEC: 11/05/16-12:20:18 - New job from zec.suprnova.cc:2142 ZEC - Total Speed: 114.582 H/s, Total Shares: 22, Rejected: 0, Time: 00:02 ZEC: GPU0 40.628 H/s, GPU1 42.777 H/s, GPU2 31.177 H/s ZEC: 11/05/16-12:20:23 - SHARE FOUND - (GPU 1) ZEC: Share accepted (141 ms)! ZEC: 11/05/16-12:20:25 - SHARE FOUND - (GPU 0) ZEC: Share accepted (140 ms)! ZEC: 11/05/16-12:20:27 - SHARE FOUND - (GPU 1) ZEC: Share accepted (140 ms)! GPU0 t=59C fan=34%, GPU1 t=55C fan=68%, GPU2 t=61C fan=52% Pool sets new share target: 0x00212e9b (diff: 1975H) ZEC: 11/05/16-12:20:39 - New job from zec.suprnova.cc:2142 ZEC - Total Speed: 110.445 H/s, Total Shares: 25, Rejected: 0, Time: 00:02 ZEC: GPU0 39.496 H/s, GPU1 41.310 H/s, GPU2 29.640 H/s ZEC: 11/05/16-12:20:44 - SHARE FOUND - (GPU 0) ZEC: Share accepted (141 ms)! Pool sets new share target: 0x000f7c26 (diff: 4232H) ZEC: 11/05/16-12:20:46 - New job from zec.suprnova.cc:2142 ZEC - Total Speed: 113.816 H/s, Total Shares: 26, Rejected: 0, Time: 00:02 ZEC: GPU0 41.130 H/s, GPU1 42.008 H/s, GPU2 30.677 H/s GPU0 t=60C fan=35%, GPU1 t=56C fan=68%, GPU2 t=61C fan=52% ZEC: 11/05/16-12:21:06 - SHARE FOUND - (GPU 1) ZEC: Share accepted (140 ms)! Pool sets new share target: 0x0016b616 (diff: 2885H) ZEC: 11/05/16-12:21:10 - New job from zec.suprnova.cc:2142 ZEC - Total Speed: 115.899 H/s, Total Shares: 27, Rejected: 0, Time: 00:03 ZEC: GPU0 41.688 H/s, GPU1 42.961 H/s, GPU2 31.249 H/s [/quote] Could you check your hashrate in -> Edit Account -> My Workers ? Maybe the Dashboard is not updating
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
IOTUSA
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2016, 04:39:37 PM |
|
LINUXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX? ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Don't release Linux. It's just bad for all except chinese farms.
|
|
|
|
LM3
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 101
Merit: 11
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2016, 04:41:18 PM |
|
LINUX PLEASE!!!
|
|
|
|
eXtatiC
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2016, 04:42:11 PM |
|
LINUXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX? ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Don't release Linux. It's just bad for all except chinese farms. Why releasing linux version will be good for chinese farms?
|
|
|
|
molitar
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2016, 04:45:12 PM |
|
OCMiner. Yes it maybe a refreshing issue. I stopped all miners and even after hitting update workers several times it still has not gone down to 0 H/s. I'll keep updating to it's showing no H/s than will try again. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2Ft8EaYqM.png&t=665&c=oj3u-qoyf0gSSw) And that is after about 3-5 minutes. It still thinks it is seeing some minor hashing. Does not appear to be refreshing/updating properly at all.
|
|
|
|
OZR
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 281
Merit: 250
You're in my wonderland!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2016, 04:45:31 PM |
|
Hello, All ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) RIG Config: 6x Sapphire Radeon RX470 Nitro+ Asrock PRO BTC H81 Intel Celeron G1840 16 GB DDR3 SSD 128mb Corsair AX1200i Windows Server 2012 R2 All environment variables is set. I'am can start Claymore's ZCash AMD GPU Miner if connect 4 GPU. It is ok & works very well. If I add 5 or 6 GPU. Miner is froze at log: 14:09:35:775 b14 Main ZCash pool is zec.suprnova.cc:2142 14:09:36:462 b14 OpenCL platform: AMD Accelerated Parallel Processing 14:09:36:462 b14 OpenCL initializing...
14:09:36:462 b14 AMD Cards available: 6 14:09:36:462 b14 GPU #0: Ellesmere, 8192 MB available, 32 compute units 14:09:36:462 b14 GPU #1: Ellesmere, 8192 MB available, 32 compute units 14:09:36:462 b14 GPU #2: Ellesmere, 8192 MB available, 32 compute units 14:09:36:462 b14 GPU #3: Ellesmere, 8192 MB available, 32 compute units 14:09:36:462 b14 GPU #4: Ellesmere, 8192 MB available, 32 compute units 14:09:36:462 b14 GPU #5: Ellesmere, 8192 MB available, 32 compute units 14:09:36:462 b14 POOL/SOLO version 14:09:36:462 b14 b100 14:09:36:462 b14 Platform: Windows 14:09:36:494 b14 start building OpenCL program... 14:09:59:260 b14 done 14:09:59:276 b14 Total cards: 6 This may be at hour and more time and never started. 6x GPU Mod was installed. Any other alghoritms excellent works at 6x GPU. What can I do to run 6 cards? Thx. ----- P.s. Claymore, thx. Very good miner. Excellent job
|
|
|
|
amirheavy666
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 228
Merit: 101
NEM (XEM) Top Coin
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2016, 04:47:05 PM |
|
I give 50 H/s with R9 390x and 30 Mh/z with R9 280x and 40 M/H with R9 380 in nanopool.... !!! that's great ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) is any pool will better it?
|
Nem.io
|
|
|
molitar
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2016, 05:01:48 PM |
|
Ok waiting to all showed 0 H/s on Suprnova took about 10+ minutes and restarting my hashing is not stalling. AMD Cards available: 3 GPU #0: Tahiti, 3072 MB available, 32 compute units GPU #0 recognized as Radeon 280X/380X GPU #1: Ellesmere, 8192 MB available, 36 compute units GPU #1 recognized as Radeon RX 480 GPU #2: Tonga, 4096 MB available, 32 compute units POOL/SOLO version Total cards: 3 One question though why is my XFX R9 380X not recognized by the miner? Is that why it is only getting only around 33 H/s while the R9 280X is getting 40 H/s? Pool sets new share target: 0x0016f260 (diff: 2856H) ZEC: 11/05/16-12:59:59 - New job from zec.suprnova.cc:2142 ZEC - Total Speed: 115.139 H/s, Total Shares: 48, Rejected: 0, Time: 00:02 ZEC: GPU0 40.982 H/s, GPU1 40.924 H/s, GPU2 33.233 H/s ZEC: 11/05/16-13:00:02 - SHARE FOUND - (GPU 0) ZEC: Share accepted (124 ms)! ZEC: 11/05/16-13:00:02 - New job from zec.suprnova.cc:2142 ZEC - Total Speed: 113.914 H/s, Total Shares: 49, Rejected: 0, Time: 00:02 ZEC: GPU0 39.532 H/s, GPU1 41.256 H/s, GPU2 33.126 H/s
Pool sets new share target: 0x0016f260 (diff: 2856H) ZEC: 11/05/16-12:59:59 - New job from zec.suprnova.cc:2142 ZEC - Total Speed: 115.139 H/s, Total Shares: 48, Rejected: 0, Time: 00:02 ZEC: GPU0 40.982 H/s, GPU1 40.924 H/s, GPU2 33.233 H/s ZEC: 11/05/16-13:00:02 - SHARE FOUND - (GPU 0) ZEC: Share accepted (124 ms)! ZEC: 11/05/16-13:00:02 - New job from zec.suprnova.cc:2142 ZEC - Total Speed: 113.914 H/s, Total Shares: 49, Rejected: 0, Time: 00:02 ZEC: GPU0 39.532 H/s, GPU1 41.256 H/s, GPU2 33.126 H/s ZEC: 11/05/16-13:00:18 - SHARE FOUND - (GPU 1) ZEC: Share accepted (140 ms)! GPU0 t=58C fan=33%, GPU1 t=54C fan=68%, GPU2 t=60C fan=51% GPU0 t=59C fan=34%, GPU1 t=55C fan=68%, GPU2 t=60C fan=51% Pool sets new share target: 0x000f4c40 (diff: 4284H) ZEC: 11/05/16-13:01:04 - New job from zec.suprnova.cc:2142 ZEC - Total Speed: 114.501 H/s, Total Shares: 50, Rejected: 0, Time: 00:03 ZEC: GPU0 40.673 H/s, GPU1 43.028 H/s, GPU2 30.800 H/s GPU0 t=60C fan=35%, GPU1 t=56C fan=68%, GPU2 t=61C fan=52% GPU0 t=61C fan=36%, GPU1 t=56C fan=68%, GPU2 t=61C fan=52% ZEC: 11/05/16-13:01:55 - SHARE FOUND - (GPU 0) ZEC: Share accepted (125 ms)! GPU0 t=61C fan=36%, GPU1 t=57C fan=68%, GPU2 t=61C fan=52% It still wants to set difficulty too high I'll see if it stabilizes but I have no idea if it does not what I should set it to.
|
|
|
|
rawbert
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2016, 05:11:29 PM |
|
Claymore, first of all thanks for the great miner! I have this one issue though and I'm not the only one as I can see in this thread others report it too. The miner and ethman shows temp/fan only for one card, GPU0. I got 4 rigs with 6 cards each RX470/480s Win 10 Pro 64bit, latest crimson drivers. I had this same issue with your eth dual miner too, with older drivers too. Every now and then it shows all 6 cards after a reboot but most of the time it doesn't. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fwww.mediafire.com%2Fconvkey%2Ffa33%2Fhtjy6p7v5i65dml6g.jpg&t=665&c=0td9uK6X9vHxfw)
|
|
|
|
elzium
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 96
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2016, 05:13:04 PM |
|
Set and forget. 24h run, no problems.
Claymore, can u set "disable crossfire" by default?
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2016, 05:26:25 PM |
|
v1.1:
- added Linux version. - fixed issue with rejected shares after devfee mining. - remove "-allpools 1" option if you use it and mine on miningpoolhub, suprnova, coinmine or nicehash pools. - added "XnSub" support for Nicehash. - fixed bugs.
PS. Read OP or Readme for updated samples of using on different pools.
|
|
|
|
KREION
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2016, 05:33:33 PM |
|
Guys if I want to set my miners to auto restart every 60 minutes how and where I'm supposed to use the -r command? On my start.bat or my config file?
|
|
|
|
hypercrypto
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2016, 05:35:42 PM |
|
v1.1:
- added Linux version. - fixed issue with rejected shares after devfee mining. - remove "-allpools 1" option if you use it and mine on miningpoolhub, suprnova, coinmine or nicehash pools. - added "XnSub" support for Nicehash. - fixed bugs.
PS. Read OP or Readme for updated samples of using on different pools.
Thanks ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
kinchotio
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2016, 05:39:18 PM |
|
v1.1:
- added Linux version. - fixed issue with rejected shares after devfee mining. - remove "-allpools 1" option if you use it and mine on miningpoolhub, suprnova, coinmine or nicehash pools. - added "XnSub" support for Nicehash. - fixed bugs.
PS. Read OP or Readme for updated samples of using on different pools.
Thank you!! ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
sorry2xs
Legendary
Offline
Activity: 924
Merit: 1000
Dark Passenger Bitcoin miner 2013,Bitcoin node
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2016, 05:41:38 PM |
|
|
Please tip the Node 1MPWKB23NsZsXHANnFwVAWT86mL24fqAjF; KO4UX THAT NO GOOD DO GOODER BAT!!!
|
|
|
NameTaken
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2016, 05:47:35 PM |
|
Just got 1.1 Linux version running under Debian stable and the miner reporting 40-45 H/s with 280Xs.
|
|
|
|
hypercrypto
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2016, 05:52:56 PM |
|
I have got 45-48 sapphire oc rx 470 4gb
|
|
|
|
MyEternity
Newbie
Offline
Activity: 6
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2016, 06:03:20 PM |
|
Claymore, what about combined CPU mining of ZCash?
|
|
|
|
Tbone5660
Newbie
Offline
Activity: 43
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2016, 06:07:46 PM |
|
Does v1.1 offer any performance improvements over v1.0 for the RX480?
|
|
|
|
adaseb
Legendary
Offline
Activity: 3836
Merit: 1727
Up to 300% + 200 FS deposit bonuses
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2016, 06:08:01 PM |
|
v1.1:
- added Linux version. - fixed issue with rejected shares after devfee mining. - remove "-allpools 1" option if you use it and mine on miningpoolhub, suprnova, coinmine or nicehash pools. - added "XnSub" support for Nicehash. - fixed bugs.
PS. Read OP or Readme for updated samples of using on different pools.
Whoa! You must of not gotten any sleep to do all that work in the last 24 hours.
|
|
|
|
|