Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[mettalmag]

I need advice about pool, at the moment we are mining on coinmine.pl, all online calculators are saying that I should get 6.6 zec a day, but I got only half of it, I'm aware that this is the mater of many factors, but I know that something is wrong, your advice would be much appreciated

dwarfpool.............read my earlier post about it

You posted that coinmine.pl paid for 830h/s and dwarfpool paid for 1100h/s when you rigs avg was 1080h/s. It means I should switch to it right ? sorry for obvious questions but I'm sleepy as hell been awaky ~28 hrs

[Xardas2014]

@rozsada try the 16.9 drivers. How many watts is your PSU?

@mettalmag yes, dwarfpool is paying me roughly the same as Claymore miner says

[mettalmag]

@rozsada try the 16.9 drivers. How many watts is your PSU?

@mettalmag yes, dwarfpool is paying me roughly the same as Claymore miner says

Thank you for your answer bow I can sleep in peace, cheers!

[delle54]

Yea. The spikes are quite real.

One of my pc's has a 730w psu powering a rx 480 and a 280x. This combination has been running stable for months without problems (even eth/sia dual mining). A few minutes ago, the pc rebooted and said "a power surge was detected - press F1 to continue". There is nothing else running on the system except claymore v9.

All settings are stock. That was the only "crash". Everything seems stable now.

[Abcederian]

I have come along ways with the help I have found here. You could tell if you saw any of my previous posts in this thread. I thank you all.

Today I started using claymore v.9 with 3 msi R9 390's on an asrock h81 btc v2.0 .

The core, memory or temp and temperature are not showing in MSI Afterburner and of course if they can't be seen there Claymore is not seeing them either.

Here is a screen shot
 
http://imgur.com/nTBVVje

I started with the most current driver and I am currently using 15.12

I have looked through the bios on the mobo and I don't see anything there, however if I use pcie as primary I get no video output.

Any advice as to clock speeds would be appreciated as well.

I am at a loss and hope that you may have seen this before. I would appreciate any idea's you might have.

TIA

[rpg]

I need advice about pool, at the moment we are mining on coinmine.pl, all online calculators are saying that I should get 6.6 zec a day, but I got only half of it, I'm aware that this is the mater of many factors, but I know that something is wrong, your advice would be much appreciated

dwarfpool.............read my earlier post about it

You posted that coinmine.pl paid for 830h/s and dwarfpool paid for 1100h/s when you rigs avg was 1080h/s. It means I should switch to it right ? sorry for obvious questions but I'm sleepy as hell been awaky ~28 hrs

Coinmine I've been aware for awhile. That's why I switched to flypool only to find the same anf very unstable. As with coinmine flypool also reports 10% under. Testing dwarfpool now and so far do good.

[Demarsac]

@rozsada try the 16.9 drivers. How many watts is your PSU?

@mettalmag yes, dwarfpool is paying me roughly the same as Claymore miner says

What exactly did you get during the last 5 hours that Dwarfpool didn't find any block?
Dwarfpool needs more hashing power to become more profitable than flypool
Till then flypool rules...

[Xardas2014]

@rozsada try the 16.9 drivers. How many watts is your PSU?

@mettalmag yes, dwarfpool is paying me roughly the same as Claymore miner says

What exactly did you get during the last 5 hours that Dwarfpool didn't find any block?
Dwarfpool needs more hashing power to become more profitable than flypool
Till then flypool rules...

I can see you don't understand how mining works lol. It doesn't matter if you are on a small pool that gets few block, vs. a large pool that gets a ton of them. On the small pool you get a higher share of the block instead of splitting it among thousands of miners. Over time it is a wash, same same, no difference.

[Marvell1]

V9 is very unstable had to roll back most of my machines

[peteycamey]

claymore whats the eta on fix for v9 ?

[adaseb]

No idea why people are still mining ZEC with their 470/480. Basically throwing $0.15-$0.20 daily per card away in profits.

[Xardas2014]

No idea why people are still mining ZEC with their 470/480. Basically throwing $0.15-$0.20 daily per card away in profits.

Has the thought crossed your mind ZEC will be pumped? I'll gladly lose a few cents a day to gamble on a pump

[mikkowendell]

No idea why people are still mining ZEC with their 470/480. Basically throwing $0.15-$0.20 daily per card away in profits.

What will you advice then? If youre not with ZEC. Will appreciate if you suggest and give us idea what to mine instead. Please. Thank you

[pilotbtc1]

New Feature: Encrypted stratum mining

We are happy to announce that Flypool has implemented stratum mining via an encrypted and authenticated SSL connection. Currently encrypted stratum mining is only supported by Claymores miner and support should be added to Optiminers new version as well.

Compared to regular stratum mining it is not longer possible for a third party to tamper (e.g. redirect your hashes to a different account) with your connection to the pool.

Instructions for Claymores miner to use encrypted mining:
Append ssl:// to your server and use port 3443:

ZecMiner64.exe -zpool ssl://eu1-zcash.flypool.org:3443 -zwal t1YZMnyXStuGKykkFxM6Lh8DTVJdTMx6R51.YourWorkerName -zpsw x



What is it ? Mining has launched does not work? Wait 20 seconds and all

[anticlimax]

Which is more profitable now ZEC or ETH.?

ETH has been more profitable for a while now

 Depends on the rig and your electric cost.
 You have to crunch YOUR OWN numbers - in my case, some of my cards are more profitable on ZEC most are more profitable on ETH the last week.

 The lower end cards have to do ZEC 'cause they can't do ETH any more (my HD 7750s never could do ETH with 1 GB ram).

Which cards are you finding more profitable on eth?
I havent mined eth in a while, but from what I can tell, its not anymore profitable than zec.

[anticlimax]

anyone have any 290's?
240h/s seems to be all I can squeeze. (-i 3)

edit: gpu-z is showing my 480's power draw spikes up to 216w from 120w.

R9 290 stilt bios 1100/1450 gets 300 h/s

That is quite the overclock from my 950/1250.
I dont have the oc versions, so I may be limited by the binning process.
Any chance you know what the stilt bios pulls at stock?

edit: I havent paid much attention, but can you flash a 390 bios onto 290's like you can with 390x/290x?

[shaoping]

I need advice about pool, at the moment we are mining on coinmine.pl, all online calculators are saying that I should get 6.6 zec a day, but I got only half of it, I'm aware that this is the mater of many factors, but I know that something is wrong, your advice would be much appreciated

Try flypool.org http://zcash.flypool.org/

[ffthomas]

New Feature: Encrypted stratum mining

We are happy to announce that Flypool has implemented stratum mining via an encrypted and authenticated SSL connection. Currently encrypted stratum mining is only supported by Claymores miner and support should be added to Optiminers new version as well.

Compared to regular stratum mining it is not longer possible for a third party to tamper (e.g. redirect your hashes to a different account) with your connection to the pool.

Instructions for Claymores miner to use encrypted mining:
Append ssl:// to your server and use port 3443:

ZecMiner64.exe -zpool ssl://eu1-zcash.flypool.org:3443 -zwal t1YZMnyXStuGKykkFxM6Lh8DTVJdTMx6R51.YourWorkerName -zpsw x



What is it ? Mining has launched does not work? Wait 20 seconds and all

SSL connections works for me fine on flypool. Settings/parameters are correct, you need to connect to ssl://eu1-zcash.flypool.org:3443  (or you can try stratum+ssl:// )

[prix]

Radeon rx 470 g1 gaming 4G, ~1260/1800, timings, claymore 9, i8: 216 H/s average per card, +16%

That's great!
What's your voltage for core/ram?
How about watts at the wall?

Memory voltage is default.
Core voltage from 0.96 to 1.03 V depends on the cards.

I don't have wattmeter. Waiting some adapters from ebay to plug ammeter direct to 12V line.

Other modes (from EthMan):

223 H/s - 1320/1810
229 H/s - 1360/1810

But I don't use this clocks and didn't search minimal voltage.

[Hotmetal]

No idea why people are still mining ZEC with their 470/480. Basically throwing $0.15-$0.20 daily per card away in profits.

What will you advice then? If youre not with ZEC. Will appreciate if you suggest and give us idea what to mine instead. Please. Thank you

Take your pick.