fk1
|
|
January 06, 2018, 05:03:46 PM Last edit: January 06, 2018, 05:15:35 PM by fk1 |
|
Hi! I jsut installed nvOC 0019 2.0 but unfortunately since then I am not able to mine ZEC or ZCL anymore. I am not sure whats wrong, theres just no screen to resume and cat 5_watchdoglog says: WARNING: Sat Jan 6 06:51:57 MST 2018 - Problem found: See diagnostics below: Percent of GPUs bellow threshold: 100 % name, pstate, temperature.gpu, fan.speed [%], utilization.gpu [%], power.draw [W], power.limit [W] GeForce GTX 1050 Ti, P8, 23, 50 %, 0 %, [Unknown Error], 76.00 W --noreconnect Disable automatic reconnection on network errors.
--temp-target In C - If set, enables temperature controller. The workload of each GPU will be continuously adjusted such that the temperature stays around this value. It is recommended to set your fan speed to 100% when using this setting.
--telemetry [=ip:port]. Starts telemetry server. Telemetry data can be accessed using a web browser(http) or by json-rpc. If no arguments are given the server listens on 127.0.0.1:2222 - Example: --telemetry=0.0.0.0:2222 Valid port range [1025-65535] Example: zm --server servername.com --port 1234 --user username CRITICAL: Sat Jan 6 06:51:57 MST 2018 - GPU Utilization is too low: restarting 3main...
I want to mine to miningpoolhub and everything worked fine under v0019 1.0. As I am trying to figure out I wonder what is the best method to restart the mining process since I am tired of rebooting the whole machine... MiningPoolHub twittert some problems with the pool. Please try another one. To restart the mining process you can restart the console window. There is no need to reboot the machine. Please post settings for your coins, it seems some settings mismatch to me Also post output of : 1 bash: # ZEC ZEC_WORKER=$WORKERNAME # replace_with_your_ZEC_address ZEC_ADDRESS="xxxxx" ZEC_POOL="europe.equihash-hub.miningpoolhub.com" ZEC_PORT="20570"
# ZCL ZCL_WORKER="02" ZCL_ADDRESS="xxxxx" ZCL_POOL="europe.zclassic.miningpoolhub.com" ZCL_PORT="20575"
0miner: if [ $COIN == "ZEC" ] then
if [ $EWBF_VERSION == "3_3" ] then HCD='/home/m1/zec/v3_3/miner' fi
if [ $EWBF_VERSION == "3_4" ] then HCD='/home/m1/zec/v3_4/miner' fi
ZECADDR="$ZEC_ADDRESS.$ZEC_WORKER"
if [ $ZM_or_EWBF == "ZM" ] then HCD='/home/m1/zec/zm/latest/zm_miner' screen -dmSL miner $HCD --server $ZEC_POOL --user $ZECADDR --pass $MINER_PWD --port $ZEC_PORT --time $ZM_OPTS ; fi
if [ $ZM_or_EWBF == "EWBF" ] then screen -dmSL miner $HCD --eexit 3 --fee $EWBF_PERCENT --pec --server $ZEC_POOL --user $ZECADDR --pass $MINER_PWD --port $ZEC_PORT $EWBF_OPTS ; fi fi
if [ $COIN == "ZCL" ] then
if [ $EWBF_VERSION == "3_3" ] then HCD='/home/m1/zec/v3_3/miner' fi
if [ $EWBF_VERSION == "3_4" ] then HCD='/home/m1/zec/v3_4/miner' fi
ZCLADDR="$ZCL_ADDRESS.$ZCL_WORKER"
if [ $ZM_or_EWBF == "ZM" ] then HCD='/home/m1/zec/zm/latest/zm_miner' screen -dmSL miner $HCD --server $ZCL_POOL --user $ZCLADDR --pass $MINER_PWD --port $ZCL_PORT --time $ZM_OPTS ; fi
if [ $ZM_or_EWBF == "EWBF" ] then screen -dmSL miner $HCD --eexit 3 --fee $EWBF_PERCENT --pec --server $ZCL_POOL --user $ZCLADDR --pass $MINER_PWD --port $ZCL_PORT $EWBF_OPTS ; fi fi
output ~/nvOC report: Report generator v0019-2.0.002 by leenoox Software info: Report ver : v0019-2.0.002 nvOC (1bash) : nvOC v0019-2.0 - Community Release nvOC (3main) : nvOC v0019-2.0 - Community Release 1bash ver : v0019-2.0.003 3main ver : v0019-2.0.006 5watchdog ver : v0019-2.0.011 6tempcontrol v: v0019-2.0.003 wtm switch ver: v0019-2.0.0011 Kernel : 4.4.0-97-generic OS : Ubuntu 16.04.3 LTS System : (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.4) nvidia driver : 387.12
Hardware info: Motherboard : ASUS STRIX Z270F GAMING Rev 1.xx BIOS ver. : 1009 07/23/2017 CPU Model : Celeron(R) CPU G3900 @ 2.80GHz CPU Cores : 2 (Cores + Threads) Mem Total : 3984632 kB Mem Free : 3041620 kB Swap Total : 0 kB Swap Free : 0 kB Ethernet : Intel I219-V
HDD and Partion info: NAME SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR MODEL REV MOUNTPOINT sda 55.9G disk 0 0 sata ATA Patriot Flare 21.1 ├─sda1 9M vfat part 0 0 └─sda2 55.9G ext4 part 0 0 /
VGA info: 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1c82 (rev a1)
1bash settings: 1bash version .............: v0019-2.0.003 LOCAL or REMOTE ...........: REMOTE TEAMVIEWER started ........: NO SSH daemon started ........: YES SLOW_USB_KEY_MODE .........: NO SRR .......................: NO Watchdog ..................: YES
Temp Control ..............: YES TARGET_TEMP ...............: 70 __FAN_ADJUST ..............: 5 POWER_ADJUST ..............: 5 ALLOWED_TEMP_DIFF .........: 2 RESTORE_POWER_LIMIT .......: 90 MINIMAL_FAN_SPEED .........: 50
CLEAR_LOGS_ON_BOOT ........: NO AUTO_UPDATE ...............: STABLE AUTO_REBOOT ...............: NO _Parallax_MODE (upPaste)...: NO
TELEGRAM_MESSAGES .: YES TELEGRAM_ALERTS .: YES TELEGRAM_TYPE .............: papampi TELEGRAM_TIMEOUT_IN_MINUTES: 480 TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN
P106_100_FULL_HEADLESS_MODE: NO GPUPowerMizerMode_Adjust...: NO POWERLIMIT (global) .......: YES POWERLIMIT_WATTS ..........: 76 CORE_OVERCLOCK (global)....: 100 MEMORY_OVERCLOCK (global) .: 100 MANUAL_FAN ................: NO ALGO_SPECIFIC_OC ..........: YES
GLOBAL_WORKERNAME .........: YES AUTO_WORKERNAME ...........: CUSTOM CUSTOM_WORKERNAME .........: 02 plusCPU ...................: NO
ZM_or_EWBF ................:
COIN ......................: ZCL ZCL_WORKER ................: 02 ZCL_ADDRESS ...............: ... ZCL_POOL ..................:
strange thing is no ZM or EWBF showing up but it is set in 1bash: ZM_or_EWBF="EWBF" # choose ZM or EWBF miner
|
|
|
|
fk1
|
|
January 06, 2018, 05:14:30 PM |
|
I just found out I accidentially pasted my ZEC/ZCL config twice in 1bash. fixed that, new report stated above: Software info: Report ver : v0019-2.0.002 nvOC (1bash) : nvOC v0019-2.0 - Community Release nvOC (3main) : nvOC v0019-2.0 - Community Release 1bash ver : v0019-2.0.003 3main ver : v0019-2.0.006 5watchdog ver : v0019-2.0.011 6tempcontrol v: v0019-2.0.003 wtm switch ver: v0019-2.0.0011 Kernel : 4.4.0-97-generic OS : Ubuntu 16.04.3 LTS System : (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.4) nvidia driver : 387.12
Hardware info: Motherboard : ASUS STRIX Z270F GAMING Rev 1.xx BIOS ver. : 1009 07/23/2017 CPU Model : Celeron(R) CPU G3900 @ 2.80GHz CPU Cores : 2 (Cores + Threads) Mem Total : 3984632 kB Mem Free : 3049740 kB Swap Total : 0 kB Swap Free : 0 kB Ethernet : Intel I219-V
HDD and Partion info: NAME SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR MODEL REV MOUNTPOINT sda 55.9G disk 0 0 sata ATA Patriot Flare 21.1 ├─sda1 9M vfat part 0 0 └─sda2 55.9G ext4 part 0 0 /
VGA info: 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1c82 (rev a1)
1bash settings: 1bash version .............: v0019-2.0.003 LOCAL or REMOTE ...........: REMOTE TEAMVIEWER started ........: NO SSH daemon started ........: YES SLOW_USB_KEY_MODE .........: NO SRR .......................: NO Watchdog ..................: YES
Temp Control ..............: YES TARGET_TEMP ...............: 70 __FAN_ADJUST ..............: 5 POWER_ADJUST ..............: 5 ALLOWED_TEMP_DIFF .........: 2 RESTORE_POWER_LIMIT .......: 90 MINIMAL_FAN_SPEED .........: 50
CLEAR_LOGS_ON_BOOT ........: NO AUTO_UPDATE ...............: STABLE AUTO_REBOOT ...............: NO _Parallax_MODE (upPaste)...: NO
TELEGRAM_MESSAGES .: YES TELEGRAM_ALERTS .: YES TELEGRAM_TYPE .............: papampi TELEGRAM_TIMEOUT_IN_MINUTES: 480 TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN
P106_100_FULL_HEADLESS_MODE: NO GPUPowerMizerMode_Adjust...: NO POWERLIMIT (global) .......: YES POWERLIMIT_WATTS ..........: 76 CORE_OVERCLOCK (global)....: 150 MEMORY_OVERCLOCK (global) .: 800 MANUAL_FAN ................: NO ALGO_SPECIFIC_OC ..........: YES
GLOBAL_WORKERNAME .........: YES AUTO_WORKERNAME ...........: CUSTOM CUSTOM_WORKERNAME .........: 02 plusCPU ...................: NO
ZM_or_EWBF ................: EWBF EWBF_VERSION ..............: 3_4 EWBF_PERCENT ..............: 0
COIN ......................: ZCL ZCL_WORKER ................: 02 ZCL_ADDRESS ...............: xxxxx... ZCL_POOL ..................: europe.zclassic.miningpoolhub.com ZCL_PORT ..................: 20575
unfortunately still no mining process
|
|
|
|
WaveFront
Member
Offline
Activity: 126
Merit: 10
|
|
January 06, 2018, 05:43:05 PM |
|
Hello, I built a very crude SRR circuitry for a Raspberry Pi to remotely reset a rig or switch it on/off (The raspberry Pi basically controls an optocoupler connected to the reset and poweron pins of the mobo). For the moment the Raspberry Pi just detect if port 22 is open on the rig. If not, it assumes that the rig is not reachable by SSH and reset the rig.
I see that there is an SRR scrips on nvOC, that looks much more sophisticated than what I am doing. Unfortunately there is no mention of the watchdog software to run on the Raspberry Pi. Anyone can give me a pointer to the software to run on the Raspberry Pi.
Cheers
I have some code to share with you but the site is blocking my input. Trying to contact with an admin about. Thanks :-) Maybe you can post a link outside this forum Ok, have a look at this and see if can help: https://bitcointalk.org/index.php?topic=1854250.msg22615430#msg22615430I don't use Nvoc's temp control. Here the latest version of script (removed reset bit and add var to use/not to use telegram alerts. I did not test the telegram bit so be aware): https://pastebin.com/mcqmt9CFIt is possible to add code to nvoc's temp control (or wdog) and reset/poweroff/on the rig from a raspberry pi. I just look forward to have a well configured rig and make it work stable instead of using wdog. I do not trust wdog not because of the coders/scripts but because of so many gpus and drivers (from time to time they change the output of error codes, etc). Hi kk003, This is awsome!! I will modify the code according the my setup. As far as I can see from a quick look at the the code, the script assumes a rig is frozen if it doesn't respond to pings. Is it correct? In the past I had rigs that were clearly frozen, but were still responding to pings. That is why, instead of pinging I check if the SSH port is open on the rig using netcat: (w5 is a timeout of 5 seconds) Thanks again :-) Since we are on RPi talks ... How many rigs can be monitored and reboot/reset/hard reboot with one RPi? What are the hardwares needed for multiple rig control? I'm not much of a hardware guy but love to make a rig controller with RPi if its not too hard. Hi Papampi, A Raspberry Pi 2B or 3B has up to 26 programmable digital pins (the original Raspberry Pi B has only 17). You could connect each digital output to an optocoupler or a relay and control the power swithch and/or the reset button of the motherboard. Suppose that you want to want to control both switch and reset of each mobo, that would make that you could monitor up to 13 mobo (26 if you just want to control the reset switch). You can also connect digital temperature sensors to the pins (programming them in input mode). You can find pretty inexpensive ready made relay boards with up to 16 relays. In practice the hardware needed for for controlling 12 mobos would be: 1) 16 relay module. There are many on Amazon, for example https://www.amazon.com/SainSmart-101-70-103-16-Channel-Relay-Module/dp/B0057OC66U2) 8 relay module. 3) Usb power supply 4) Optional external HDMI screen, unless you are running the RPi headless through SSH 5) Of course, a raspberry Pi 6) Plenty of cables with female Dupont connectors The standard OS for the Raspberry Pi is Debian (Raspbian), but if you prefer you can have as well Ubuntu or Windows 10 IoT. The advantage of Raspbian is that it comes with all the utilities for controlling directly the GPIO pins, either from Bash or a high level language like C++ or Python. Awesome, Thanks a lot for the info I have 3 RPi 2B that dont use any more because when 3B came out I replaced them for faster kodi So I'm going to get a relay module and start playing with it, for sure I'm going to ask for more help on programming and connecting the relay to the board and ... Thanks a lot mate Keep calm and carry on mining No problems ;-) Just a thing, do not buy the board that I put in the link of my previous message. I justs realised that the inputs are for 5V signals while what you need is a board compatible with 3.3V signals. Look for a board that is specifically designed for the RPi.
|
|
|
|
fk1
|
|
January 06, 2018, 06:07:41 PM |
|
I just found out I accidentially pasted my ZEC/ZCL config twice in 1bash. fixed that, new report stated above: Software info: Report ver : v0019-2.0.002 nvOC (1bash) : nvOC v0019-2.0 - Community Release nvOC (3main) : nvOC v0019-2.0 - Community Release 1bash ver : v0019-2.0.003 3main ver : v0019-2.0.006 5watchdog ver : v0019-2.0.011 6tempcontrol v: v0019-2.0.003 wtm switch ver: v0019-2.0.0011 Kernel : 4.4.0-97-generic OS : Ubuntu 16.04.3 LTS System : (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.4) nvidia driver : 387.12
Hardware info: Motherboard : ASUS STRIX Z270F GAMING Rev 1.xx BIOS ver. : 1009 07/23/2017 CPU Model : Celeron(R) CPU G3900 @ 2.80GHz CPU Cores : 2 (Cores + Threads) Mem Total : 3984632 kB Mem Free : 3049740 kB Swap Total : 0 kB Swap Free : 0 kB Ethernet : Intel I219-V
HDD and Partion info: NAME SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR MODEL REV MOUNTPOINT sda 55.9G disk 0 0 sata ATA Patriot Flare 21.1 ├─sda1 9M vfat part 0 0 └─sda2 55.9G ext4 part 0 0 /
VGA info: 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1c82 (rev a1)
1bash settings: 1bash version .............: v0019-2.0.003 LOCAL or REMOTE ...........: REMOTE TEAMVIEWER started ........: NO SSH daemon started ........: YES SLOW_USB_KEY_MODE .........: NO SRR .......................: NO Watchdog ..................: YES
Temp Control ..............: YES TARGET_TEMP ...............: 70 __FAN_ADJUST ..............: 5 POWER_ADJUST ..............: 5 ALLOWED_TEMP_DIFF .........: 2 RESTORE_POWER_LIMIT .......: 90 MINIMAL_FAN_SPEED .........: 50
CLEAR_LOGS_ON_BOOT ........: NO AUTO_UPDATE ...............: STABLE AUTO_REBOOT ...............: NO _Parallax_MODE (upPaste)...: NO
TELEGRAM_MESSAGES .: YES TELEGRAM_ALERTS .: YES TELEGRAM_TYPE .............: papampi TELEGRAM_TIMEOUT_IN_MINUTES: 480 TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN
P106_100_FULL_HEADLESS_MODE: NO GPUPowerMizerMode_Adjust...: NO POWERLIMIT (global) .......: YES POWERLIMIT_WATTS ..........: 76 CORE_OVERCLOCK (global)....: 150 MEMORY_OVERCLOCK (global) .: 800 MANUAL_FAN ................: NO ALGO_SPECIFIC_OC ..........: YES
GLOBAL_WORKERNAME .........: YES AUTO_WORKERNAME ...........: CUSTOM CUSTOM_WORKERNAME .........: 02 plusCPU ...................: NO
ZM_or_EWBF ................: EWBF EWBF_VERSION ..............: 3_4 EWBF_PERCENT ..............: 0
COIN ......................: ZCL ZCL_WORKER ................: 02 ZCL_ADDRESS ...............: xxxxx... ZCL_POOL ..................: europe.zclassic.miningpoolhub.com ZCL_PORT ..................: 20575
unfortunately still no mining process I curled 0miner 1bash and 3main from git and got ZCL to work so I guess I had a typo or something somewhere when I tried to handle this problem. tyvm nvtl
|
|
|
|
Rumo
Newbie
Offline
Activity: 41
Merit: 0
|
|
January 06, 2018, 08:52:00 PM |
|
I was having some issues this week with some pools and decide to rewrite the code for pool check in watchdog, it was supposed to be in v19-2.0 but we let it slide for that time. It works almost same as network check but instead of checking for network it checks for pool and wait if its unreachable to prevent miner restart and eventually rig restarts. Then After I wrote it I thought why wait and waste time when we can switch to an alternate pool So I rewrite it again to add an alternate pool in 1bash whether its supported by the miner or not. What left to do is to check the first pool and switch back as soon as it becomes available. So here is my question: How important it is for you guys to have an alternate pool? And how important it is to switch back to main pool? I'm asking this because I wrote the code for myself and to make it work with rest of miners and coins it needs more changes so I don't want to work on something not so useful It's clear that luckpool has had a lot of hits this week. They probably have lower fee than elsewhere but their servers seem unstable, so I decided to go elsewhere, even if it costs me a little more fee. When I look at MPH and the number of pools they have and I have never had a single break with them, all I can switch home, I rock it. I also had troubles with Nicehash who all of a sudden Wednesday night began to refuse my connections to their servers ... So I created a ticket home and removed nicehash from my list of WTM switch ... Your proposal to send to another alternative pool is a good idea, but I have another one: Why not try the second corner directly in the WTM list. Obviously this only works for those who use WTM_Switch, but it must be possible to combine both a second pool and a second coin with or without the SWITCH WTM. I would love to have it now because ZPOOL is down and my riggs shouting at me.
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
January 07, 2018, 07:00:02 AM |
|
I was having some issues this week with some pools and decide to rewrite the code for pool check in watchdog, it was supposed to be in v19-2.0 but we let it slide for that time. It works almost same as network check but instead of checking for network it checks for pool and wait if its unreachable to prevent miner restart and eventually rig restarts. Then After I wrote it I thought why wait and waste time when we can switch to an alternate pool So I rewrite it again to add an alternate pool in 1bash whether its supported by the miner or not. What left to do is to check the first pool and switch back as soon as it becomes available. So here is my question: How important it is for you guys to have an alternate pool? And how important it is to switch back to main pool? I'm asking this because I wrote the code for myself and to make it work with rest of miners and coins it needs more changes so I don't want to work on something not so useful It's clear that luckpool has had a lot of hits this week. They probably have lower fee than elsewhere but their servers seem unstable, so I decided to go elsewhere, even if it costs me a little more fee. When I look at MPH and the number of pools they have and I have never had a single break with them, all I can switch home, I rock it. I also had troubles with Nicehash who all of a sudden Wednesday night began to refuse my connections to their servers ... So I created a ticket home and removed nicehash from my list of WTM switch ... Your proposal to send to another alternative pool is a good idea, but I have another one: Why not try the second corner directly in the WTM list. Obviously this only works for those who use WTM_Switch, but it must be possible to combine both a second pool and a second coin with or without the SWITCH WTM. Thanks for sharing your thoughts on the alternate pool As you mentioned your solution gonna work only for those who use wtm switcher and not all, and more important problem is most of us usually mine on one pool for all of our coins so for example if you mine ZCL on suprnova for sure your ZEC pool is suprnova too, so if its ZCL pool is down there is a big chance that its ZEC pool is down too. So its better to switch pool instead of switching coins.
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
January 07, 2018, 08:06:08 AM |
|
I was having some issues this week with some pools and decide to rewrite the code for pool check in watchdog, it was supposed to be in v19-2.0 but we let it slide for that time. It works almost same as network check but instead of checking for network it checks for pool and wait if its unreachable to prevent miner restart and eventually rig restarts. Then After I wrote it I thought why wait and waste time when we can switch to an alternate pool So I rewrite it again to add an alternate pool in 1bash whether its supported by the miner or not. What left to do is to check the first pool and switch back as soon as it becomes available. So here is my question: How important it is for you guys to have an alternate pool? And how important it is to switch back to main pool? I'm asking this because I wrote the code for myself and to make it work with rest of miners and coins it needs more changes so I don't want to work on something not so useful It's clear that luckpool has had a lot of hits this week. They probably have lower fee than elsewhere but their servers seem unstable, so I decided to go elsewhere, even if it costs me a little more fee. When I look at MPH and the number of pools they have and I have never had a single break with them, all I can switch home, I rock it. I also had troubles with Nicehash who all of a sudden Wednesday night began to refuse my connections to their servers ... So I created a ticket home and removed nicehash from my list of WTM switch ... Your proposal to send to another alternative pool is a good idea, but I have another one: Why not try the second corner directly in the WTM list. Obviously this only works for those who use WTM_Switch, but it must be possible to combine both a second pool and a second coin with or without the SWITCH WTM. I would love to have it now because ZPOOL is down and my riggs shouting at me. I'm sorry Rumo, but you should wait a bit longer, as its better to wait and have a bug free code than get it sooner with some bugs that could cause problems. The code is almost done, I'm working on an update script so users dont need to redo their 1bash and the update script do it for them, and thats writing a script to edit so many coins so its a long long update script But I will send you a pre-release so you can test it when its done.
|
|
|
|
JK-47
Newbie
Offline
Activity: 1
Merit: 0
|
|
January 07, 2018, 08:17:48 AM |
|
Complete noob here using nvoc 17 to mine ZCL & ZEN. Everytime I connect to a pool (minepro,suprnova,luckpool) it shows my hash rate but not payment stats. Sometimes payment stats will show up for a little then show $0. Do these pools lag on info like that or am I mining for free when I don't see payment info? Upwards of 12 hours with no data shown.
However, I can mine NICE and get direct payment info on NiceHash. Any help will be greatly appreciated.
|
|
|
|
bumbu100
Newbie
Offline
Activity: 44
Merit: 0
|
|
January 07, 2018, 08:44:42 AM |
|
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
January 07, 2018, 09:01:08 AM |
|
|
|
|
|
WaveFront
Member
Offline
Activity: 126
Merit: 10
|
|
January 07, 2018, 09:26:25 AM |
|
I believe "remote Bash" was a feature introduced in the PoisonXA fork. From one of his release notes: remote bash feature Will allow your to host your 1bash files remotely to edit your miners without direct connection
|
|
|
|
bumbu100
Newbie
Offline
Activity: 44
Merit: 0
|
|
January 07, 2018, 10:14:23 AM |
|
I believe "remote Bash" was a feature introduced in the PoisonXA fork. From one of his release notes: remote bash feature Will allow your to host your 1bash files remotely to edit your miners without direct connection yes and that's a very good option to control many rigs through a single bash file
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
January 07, 2018, 10:34:01 AM Last edit: January 07, 2018, 10:59:26 AM by papampi |
|
I believe "remote Bash" was a feature introduced in the PoisonXA fork. From one of his release notes: remote bash feature Will allow your to host your 1bash files remotely to edit your miners without direct connection yes and that's a very good option to control many rigs through a single bash file Nice But thats nothing new, its been in nvOC since long ago with _Parallax_MODE _Parallax_MODE="NO" # YES or NO # To deploy 1bash remotely from pastebin.com. With a small difference in Parallax_MODE you own your config in pastebin but I dont know where the configs saves in pxa and who owns the web server
|
|
|
|
bumbu100
Newbie
Offline
Activity: 44
Merit: 0
|
|
January 07, 2018, 11:23:09 AM |
|
I believe "remote Bash" was a feature introduced in the PoisonXA fork. From one of his release notes: remote bash feature Will allow your to host your 1bash files remotely to edit your miners without direct connection yes and that's a very good option to control many rigs through a single bash file Nice But thats nothing new, its been in nvOC since long ago with _Parallax_MODE _Parallax_MODE="NO" # YES or NO # To deploy 1bash remotely from pastebin.com. With a small difference in Parallax_MODE you own your config in pastebin but I dont know where the configs saves in pxa and who owns the web server I am using my own 1bash, my own webserver for hosting it (inside a LAN). I have a good connection between rigs and remote bash, and remote bash is really working, but not perfectly....
|
|
|
|
CryptAtomeTrader44
Full Member
Offline
Activity: 340
Merit: 103
It is easier to break an atom than partialities AE
|
|
January 07, 2018, 12:39:45 PM Last edit: January 07, 2018, 02:34:58 PM by CryptAtomeTrader44 |
|
Since apparently the Mega link of papampi poses problems of availability and complications due to the rules of this service to download version 19-2.0 of nvOC, I uploaded on an online file-saving service the file that contains the IMG Here is the link: http://dl.free.fr/hAWltP5uDI did not test or check the download after uploading it. Tell me if it is good or not. NB: I live in France and this service is a very famous French provider (FREE), so it's written in French, but you only have to click on Valider et Telecharger
|
|
|
|
Rumo
Newbie
Offline
Activity: 41
Merit: 0
|
|
January 07, 2018, 12:40:16 PM |
|
I was having some issues this week with some pools and decide to rewrite the code for pool check in watchdog, it was supposed to be in v19-2.0 but we let it slide for that time. It works almost same as network check but instead of checking for network it checks for pool and wait if its unreachable to prevent miner restart and eventually rig restarts. Then After I wrote it I thought why wait and waste time when we can switch to an alternate pool So I rewrite it again to add an alternate pool in 1bash whether its supported by the miner or not. What left to do is to check the first pool and switch back as soon as it becomes available. So here is my question: How important it is for you guys to have an alternate pool? And how important it is to switch back to main pool? I'm asking this because I wrote the code for myself and to make it work with rest of miners and coins it needs more changes so I don't want to work on something not so useful It's clear that luckpool has had a lot of hits this week. They probably have lower fee than elsewhere but their servers seem unstable, so I decided to go elsewhere, even if it costs me a little more fee. When I look at MPH and the number of pools they have and I have never had a single break with them, all I can switch home, I rock it. I also had troubles with Nicehash who all of a sudden Wednesday night began to refuse my connections to their servers ... So I created a ticket home and removed nicehash from my list of WTM switch ... Your proposal to send to another alternative pool is a good idea, but I have another one: Why not try the second corner directly in the WTM list. Obviously this only works for those who use WTM_Switch, but it must be possible to combine both a second pool and a second coin with or without the SWITCH WTM. I would love to have it now because ZPOOL is down and my riggs shouting at me. I'm sorry Rumo, but you should wait a bit longer, as its better to wait and have a bug free code than get it sooner with some bugs that could cause problems. The code is almost done, I'm working on an update script so users dont need to redo their 1bash and the update script do it for them, and thats writing a script to edit so many coins so its a long long update script But I will send you a pre-release so you can test it when its done. Cool Stuff. Thanks.
|
|
|
|
damNmad
Full Member
Offline
Activity: 378
Merit: 104
nvOC forever
|
|
January 07, 2018, 01:43:23 PM |
|
Since apparently the Mega link of papampi poses problems of availability and complications due to the rules of this service to download version 19-2.0 of nvOC, I uploaded on an online file-saving service the file that contains the IMG Here is the link: http://dl.free.fr/hAWltP5uDI did not test or check the download after uploading it. Tell me if he is good or not. NB: I live in France and this service is a very famous French provider (FREE), so it's written in French, but you only have to click on Valider et Telecharger Thanks mate. Downloading it now, seems it is working, Once downloading finishes, i will upload it to Gdrive and create a torrent as well if possible.
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
January 07, 2018, 01:52:44 PM |
|
Since apparently the Mega link of papampi poses problems of availability and complications due to the rules of this service to download version 19-2.0 of nvOC, I uploaded on an online file-saving service the file that contains the IMG Here is the link: http://dl.free.fr/hAWltP5uDI did not test or check the download after uploading it. Tell me if he is good or not. NB: I live in France and this service is a very famous French provider (FREE), so it's written in French, but you only have to click on Valider et Telecharger Thanks mate, Will add the link to GitHub after first confirmation.
|
|
|
|
l4ncel0t
Newbie
Offline
Activity: 14
Merit: 0
|
|
January 07, 2018, 03:55:55 PM |
|
DSR patch, not on WTM so no autoswitch --- backups/1bash 2018-01-07 16:52:36.927391240 +0100 +++ 1bash 2018-01-07 16:42:10.831384399 +0100 @@ -113,7 +113,7 @@ ######### ONION #ALGO - Neoscrypt -######### PXC FTC ORB TZC VIVO +######### PXC FTC ORB TZC VIVO DSR (No autoswitch for DSR)) #ALGO - Myriad-Groestl ######### XMY @@ -600,6 +600,14 @@ TZC_POOL="pool.unimining.net" TZC_PORT="4237" TZC_INTENSITY="17" + +# DSR ## No Need to add stratum+tcp:// to server address +DSR_WORKER="$WORKERNAME" +DSR_ADDRESS="replace_with_your_address" +DSR_POOL="pool.unimining.net" +DSR_PORT="4234" +DSR_INTENSITY="17" + # NICE_ETHASH autoconverts to BTC: ensure you update BTC_ADDRESS if you use NICE_ETHASH NICE_ETHASH_WORKER="$WORKERNAME" NICE_ETHASH_POOL="stratum+tcp://daggerhashimoto.usa.nicehash.com:3353"
--- backups/0miner 2018-01-07 16:51:33.845080736 +0100 +++ 0miner 2018-01-07 16:50:03.737208788 +0100 @@ -409,6 +409,13 @@ screen -dmSL miner $HCD -a neoscrypt -o stratum+tcp://$TZC_POOL:$TZC_PORT -u $ADDR -p $MINER_PWD -i $TZC_INTENSITY fi +if [ $COIN == "DSR" ] +then + HCD='/home/m1/KTccminer-817/ccminer' + ADDR="$DSR_ADDRESS.$DSR_WORKER" + screen -dmSL miner $HCD -a neoscrypt -o stratum+tcp://$DSR_POOL:$DRS_PORT -u $ADDR -p $MINER_PWD -i $DSR_INTENSITY +fi + if [ $COIN == "VIVO" ] then HCD='/home/m1/KTccminer-817/ccminer'
|
|
|
|
CryptAtomeTrader44
Full Member
Offline
Activity: 340
Merit: 103
It is easier to break an atom than partialities AE
|
|
January 07, 2018, 04:19:09 PM Last edit: January 07, 2018, 05:29:28 PM by CryptAtomeTrader44 |
|
DSR patch, not on WTM so no autoswitch --- backups/1bash 2018-01-07 16:52:36.927391240 +0100 +++ 1bash 2018-01-07 16:42:10.831384399 +0100 @@ -113,7 +113,7 @@ ######### ONION #ALGO - Neoscrypt -######### PXC FTC ORB TZC VIVO +######### PXC FTC ORB TZC VIVO DSR (No autoswitch for DSR)) #ALGO - Myriad-Groestl ######### XMY @@ -600,6 +600,14 @@ TZC_POOL="pool.unimining.net" TZC_PORT="4237" TZC_INTENSITY="17" + +# DSR ## No Need to add stratum+tcp:// to server address +DSR_WORKER="$WORKERNAME" +DSR_ADDRESS="replace_with_your_address" +DSR_POOL="pool.unimining.net" +DSR_PORT="4234" +DSR_INTENSITY="17" + # NICE_ETHASH autoconverts to BTC: ensure you update BTC_ADDRESS if you use NICE_ETHASH NICE_ETHASH_WORKER="$WORKERNAME" NICE_ETHASH_POOL="stratum+tcp://daggerhashimoto.usa.nicehash.com:3353"
--- backups/0miner 2018-01-07 16:51:33.845080736 +0100 +++ 0miner 2018-01-07 16:50:03.737208788 +0100 @@ -409,6 +409,13 @@ screen -dmSL miner $HCD -a neoscrypt -o stratum+tcp://$TZC_POOL:$TZC_PORT -u $ADDR -p $MINER_PWD -i $TZC_INTENSITY fi +if [ $COIN == "DSR" ] +then + HCD='/home/m1/KTccminer-817/ccminer' + ADDR="$DSR_ADDRESS.$DSR_WORKER" + screen -dmSL miner $HCD -a neoscrypt -o stratum+tcp://$DSR_POOL:$DRS_PORT -u $ADDR -p $MINER_PWD -i $DSR_INTENSITY +fi + if [ $COIN == "VIVO" ] then HCD='/home/m1/KTccminer-817/ccminer'
OK adding a coin, but how is profitable to mine DSR ? And i want to tell all that unimining.net had some saturation on neoscrypt pools. I tried to mine GBX at this pool and they can't provide me any blocks to mine. in additions : 1/ I'm not sure that all of us have a folder named KTccminer-817 in /home/m1 2/ I think there is a "typing error" in the command line -o stratum+tcp://$DSR_POOL:$DRS_PORT must be -o stratum+tcp://$DSR_POOL:$DSR_PORT You have to be more precise an readable in your post. You can post a modification understandable and easy to do without being a computer scientist or a computer technician. This system is named "easy to use" for reminder. Thanks for adding. EDIT : @L4ncel0t I know it's nasty but it's my opinion: their web page gives an impression of sidereal emptiness And then the proposed exchanges seem to me rather second area even unknown, except coinmarkets and still I'm skeptical about this exchange (less than Yobit anyway)
|
|
|
|
|