zamans98
|
|
October 09, 2017, 05:02:00 PM |
|
My test is running for 5 days now, granatgas in winning actually with higher fee.
Granatgas have 2% fee, Zpool have 1% fee.
I will let this one run for 2 days more and stop it.
Zpool
Dash (total pending) 0.02187792 0.00530734 0.02718526 DASH Balance 0.00038378 DASH Total Unpaid **** 0.02756904 DASH Total Paid *** 0.39179026 DASH Total Earned 0.41935930 DASH
Granatgas
Dash (Pending Balance) 0.01357193 0.00617151 0.01974344 DASH Balance 0.01147243 DASH Total Paid 0.50779724 DASH
Where do you live ? I'm locate in south east asia and worried about granatgas server latency coz they don't have any asia server. 0.1 Dash / day is not bad . I live in french, i have something like 100ms to get a answer from granatgas, but we using stratum protocol so everything is fine I stopped my D3 on zpool ... After some deep check it seems, sometime on Zpool my miner hanging and w8ting for a share submission. In result my fan running at 100% w8ting for a job ... I mine at home so, i cant handle every 2-4 hours 1 or 2 minute at 100% airflow ... On practice they running at 43% without any issue. In conclusion i stop using Zpool for moment ... Or at least for X11 algo. intermittent downtime here on granatgas pool. Seems that there's server issue. At least from my end. All of your miner have this issue ? One of my D3 seems to see pool dead sometime, but not the other one ... Same network, same switch, a simple ping running on google resolve this issue. 8h straight without a disconnect from pool, have to reboot my miner this morning. Not sure, but the downtime is quite frequent. to Zpool.ca its okay stratum+tcp://stratum-us.granatgas-pool.info:1111
|
|
|
|
Bibi187
Full Member
Offline
Activity: 420
Merit: 106
https://steemit.com/@bibi187
|
|
October 09, 2017, 05:09:09 PM |
|
My test is running for 5 days now, granatgas in winning actually with higher fee.
Granatgas have 2% fee, Zpool have 1% fee.
I will let this one run for 2 days more and stop it.
Zpool
Dash (total pending) 0.02187792 0.00530734 0.02718526 DASH Balance 0.00038378 DASH Total Unpaid **** 0.02756904 DASH Total Paid *** 0.39179026 DASH Total Earned 0.41935930 DASH
Granatgas
Dash (Pending Balance) 0.01357193 0.00617151 0.01974344 DASH Balance 0.01147243 DASH Total Paid 0.50779724 DASH
Where do you live ? I'm locate in south east asia and worried about granatgas server latency coz they don't have any asia server. 0.1 Dash / day is not bad . I live in french, i have something like 100ms to get a answer from granatgas, but we using stratum protocol so everything is fine I stopped my D3 on zpool ... After some deep check it seems, sometime on Zpool my miner hanging and w8ting for a share submission. In result my fan running at 100% w8ting for a job ... I mine at home so, i cant handle every 2-4 hours 1 or 2 minute at 100% airflow ... On practice they running at 43% without any issue. In conclusion i stop using Zpool for moment ... Or at least for X11 algo. intermittent downtime here on granatgas pool. Seems that there's server issue. At least from my end. All of your miner have this issue ? One of my D3 seems to see pool dead sometime, but not the other one ... Same network, same switch, a simple ping running on google resolve this issue. 8h straight without a disconnect from pool, have to reboot my miner this morning. Not sure, but the downtime is quite frequent. to Zpool.ca its okay stratum+tcp://stratum-us.granatgas-pool.info:1111 I highly recommand to every one to avoid Zpool ... I dont have downtime issue on granatgas and anyway if you have less them 20% downtime stay on granatgas oO
|
|
|
|
Johninthai
Member
Offline
Activity: 76
Merit: 10
|
|
October 09, 2017, 05:14:40 PM |
|
how about coin2mine.pl ? Anybody got any experience using them ?
|
|
|
|
zamans98
|
|
October 09, 2017, 07:14:10 PM |
|
how about coin2mine.pl ? Anybody got any experience using them ?
i did, quite good in the August and lesser in Sept # of Miners comes and goes.
|
|
|
|
Johninthai
Member
Offline
Activity: 76
Merit: 10
|
|
October 09, 2017, 07:37:51 PM |
|
how about coin2mine.pl ? Anybody got any experience using them ?
i did, quite good in the August and lesser in Sept # of Miners comes and goes. Thanks thinking of pointing my D3's to that pool.
|
|
|
|
mousehouse
|
|
October 09, 2017, 08:58:36 PM |
|
I'll pay import taxes and VAT. There are no import taxes for miners in Europe. Only VAT. Surely there is only VAT to pay for EU, but is not it enough that you have to pay from 19% to 23% of the declared value? in some cases like if you buy directly from Bitmain you even pay 500 euros or more? I paid 586 euros in France. No one will answer why i was so badly overcharged. I am reclaiming 100% though as a business expense. I leave in French to and receive my D3 + PSU, is weird i only pay 516,94 euros per setup. I tried contacting rod@fedex.com and they will not respond. I'm getting very sick of the careless way business has been handled by customs and shippers in France. Had the same happen to me on my L3's from Bitmain. The issue is that Bitmain provides you with a nice commercial invoice with low value, but on the shipping documentation they submit to UPS/DHL they list the value at the time of purchase. That is used by the EU importer team. You pay ~20% taxes PLUS charges for importing goods. It will be between 20-25% on top of your other charges. No way around it, except buying them as a business and reclaiming VAT (but that also makes the profit company income, thus taxable).
|
|
|
|
dashdash
Newbie
Offline
Activity: 9
Merit: 0
|
|
October 09, 2017, 09:30:43 PM |
|
I'll pay import taxes and VAT. There are no import taxes for miners in Europe. Only VAT. Surely there is only VAT to pay for EU, but is not it enough that you have to pay from 19% to 23% of the declared value? in some cases like if you buy directly from Bitmain you even pay 500 euros or more? I never said it's not enough. It's more than enough! I have 24% in my country. I was just saying if you use the correct taric codes atleast you save some extra 10% they might try to steal from you. what is the correct TARIC code to import antminers to EU without the extra 10 % duty (just paying VAT)?
|
|
|
|
Maicol792
Legendary
Offline
Activity: 1260
Merit: 1010
|
|
October 09, 2017, 09:53:07 PM |
|
For now I trying lottery on dash minin solo nicehash ... I think we need a good X11 coin for mining
|
|
|
|
zamans98
|
|
October 09, 2017, 11:22:15 PM |
|
For now I trying lottery on dash minin solo nicehash ... I think we need a good X11 coin for mining if u have 10 D3 mining as a mini-pool, you may struck with one/two block in about 1/2 month time.
|
|
|
|
RealKariverson
|
|
October 09, 2017, 11:27:01 PM |
|
I'll pay import taxes and VAT. There are no import taxes for miners in Europe. Only VAT. Surely there is only VAT to pay for EU, but is not it enough that you have to pay from 19% to 23% of the declared value? in some cases like if you buy directly from Bitmain you even pay 500 euros or more? I never said it's not enough. It's more than enough! I have 24% in my country. I was just saying if you use the correct taric codes atleast you save some extra 10% they might try to steal from you. what is the correct TARIC code to import antminers to EU without the extra 10 % duty (just paying VAT)? 8471 41 00 90 for the miner 8504 40 30 90 for the power supply
|
|
|
|
cienki77
Member
Offline
Activity: 123
Merit: 10
|
|
October 10, 2017, 06:11:29 AM |
|
For now I trying lottery on dash minin solo nicehash ... I think we need a good X11 coin for mining Helium is coming soon
|
FCK COIN REBORN! WE DO GIVE A FCK!
|
|
|
micairvas
|
|
October 10, 2017, 07:05:20 AM |
|
Does anyone have problem when some miners losing 3rd board and hashing 10-11 Ghs? This happens on many D3 miners, not just on one. Miners works on default settings, temperatures are good, max board temperatures are 65-70C. After I restart D3, all boards working normally again for some time. Is there some firmware upgrade for this problem, anyone have solution for this? D3 is not stable miner at all. L3+ is a lot better device.
|
|
|
|
Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1465
Clueless!
|
|
October 10, 2017, 10:47:28 AM |
|
For now I trying lottery on dash minin solo nicehash ... I think we need a good X11 coin for mining Helium is coming soon is this payout likely to hit as an option on prohashing or nicehash for that matter? curious... could maybe point my scrypt-pow and x-11 in that direction on that option
|
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:)
|
|
|
CryptoGuu
|
|
October 10, 2017, 12:09:04 PM |
|
Does anyone have problem when some miners losing 3rd board and hashing 10-11 Ghs? This happens on many D3 miners, not just on one. Miners works on default settings, temperatures are good, max board temperatures are 65-70C. After I restart D3, all boards working normally again for some time. Is there some firmware upgrade for this problem, anyone have solution for this? D3 is not stable miner at all. L3+ is a lot better device.
got the same problem with mine. Would appreciate some infos.
|
|
|
|
Bibi187
Full Member
Offline
Activity: 420
Merit: 106
https://steemit.com/@bibi187
|
|
October 10, 2017, 12:46:24 PM |
|
Does anyone have problem when some miners losing 3rd board and hashing 10-11 Ghs? This happens on many D3 miners, not just on one. Miners works on default settings, temperatures are good, max board temperatures are 65-70C. After I restart D3, all boards working normally again for some time. Is there some firmware upgrade for this problem, anyone have solution for this? D3 is not stable miner at all. L3+ is a lot better device.
got the same problem with mine. Would appreciate some infos. I think is a common issue ... I have this problem to, it happen sometime after some days. I update firmware, reset hardware etc ... Nothing fix this issue, he just happen. Other problem i get, on one of my D3, on board get error on launch like they cant reach correct submitted work, it chain 40-50 HW error and show some xxx on this board. After 1 minute, board launch like is ok, remove all xxx and accept submitted work.
|
|
|
|
Tai_Pan
|
|
October 10, 2017, 01:15:40 PM |
|
Can someone who updated the firmware post here a screen shot from the dashboard's "system \ overview" please?
Thank you.
|
|
|
|
Bibi187
Full Member
Offline
Activity: 420
Merit: 106
https://steemit.com/@bibi187
|
|
October 10, 2017, 02:17:24 PM |
|
Can someone who updated the firmware post here a screen shot from the dashboard's "system \ overview" please?
Thank you.
You doubt about people do this upgrade ? It seems safe to do since is a official release. Here is your screenshot, IP is hyde.
|
|
|
|
VoskCoin
|
|
October 10, 2017, 02:23:04 PM |
|
Can anyone give me a link to their D3 mining on nicehash? pref just 1 d3?
|
|
|
|
nezero
|
|
October 10, 2017, 03:17:33 PM |
|
I'll pay import taxes and VAT. There are no import taxes for miners in Europe. Only VAT. Surely there is only VAT to pay for EU, but is not it enough that you have to pay from 19% to 23% of the declared value? in some cases like if you buy directly from Bitmain you even pay 500 euros or more? I never said it's not enough. It's more than enough! I have 24% in my country. I was just saying if you use the correct taric codes atleast you save some extra 10% they might try to steal from you. what is the correct TARIC code to import antminers to EU without the extra 10 % duty (just paying VAT)? 8471 41 00 90 for the miner 8504 40 30 90 for the power supply Good to know. The D3 October batch is my first purchase from Bitmain, can anyone give me any advice on what to expect. E.G. email notifications of dispatch, paying VAT etc..
|
|
|
|
|
|