[ANN] MemoryCoin | CPU Coin | Paid Dev Team | Limited Supply [MMC]

[Zen00]

please

how can i put process to 16 instead of 8 in widnows client?

Type in the debug window setgenerate true 16

[1714479967]

1714479967

[1714479967]

1714479967

[1714479967]

1714479967

[BitcoinForumator]

Started mining.

getmininginfo:

blocks" : 49,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.00000301,
"errors" : "",
"generate" : false,
"genproclimit" : 8,
"hashespermin" : 0.00000000,
"pooledtx" : 0,
"testnet" : false

Why false? (btw in the Task Manager the CPU is 98 percent ramping and Memory 2.319.xxx, i7 2600k, mining with 8 thread.

How to change False to true?

[giveBTCpls]

Do manually added nodes with the debugging console stay when you relaunch the client ?

no

So how do you permanently add them?

[hophip]

It worked, it's downloading the block.
What about the .conf file? Why it isn't included by default? What should I put inside the memorycoin.conf file that I have to create anyway?

Also, how do I set that the mined coins go to a certain address? I dont want to be mining and find out they aren't getting into my address

I have the exact same question please !

Actually I've never used a .conf file

Mined rewards will go to your main wallet address.

Then why im not having seeing any coins?


{
"blocks" : 44,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.00000099,
"errors" : "",
"generate" : false,
"genproclimit" : 4,
"hashespermin" : 0.44342621,
"pooledtx" : 0,
"testnet" : false
}

How do I see if im mined something or not? Is that allright or something is wrong? why is generate set to false? please help

ugh... When you mine a coin, on the home page "overview" it will show your balance at the top left. Coins must be confirmed before they enter your Balance.
When you mine a block it will appear under the "recent transactions" on the right with the time amount and address.

Why does my "generate" say false but everyone else says true? what does this mean.
Also, why is this so slow if we are mining right at the begining? No one has a single MMC yet not even unconfirmed

if you looked. There have been people that have mined. Like the post above yours...just has a loooooong time to find a block.

That still doesnt answer what generate is and why mine says false?

Did you do Settings -> Mine _ Processes yet?

It will be at 0.000000 hashespermin for a couple minutes then it should update.

Yes, im mining already, look at the hash rate



{
"blocks" : 46,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.00000154,
"errors" : "",
"generate" : false,
"genproclimit" : 4,
"hashespermin" : 0.44859478,
"pooledtx" : 0,
"testnet" : false
}

But generate says false for some reason, I dont know what that means but everyone else has "true" on it

Not sure what it really means either. But I think you can change it to true just by doing "setgenerate true"

Can anyone answer this?

Here is how you get the memorycoin.conf file to work in the correct directory on Windows 7...

Go to C:\Users\<YourUsernameHere>\AppData\Roaming\MemoryCoin\   (**do not include < > in your username folder) ###NINJA EDIT- The folder "AppData" is a hidden folder. If you do not see this folder perform the following from Windows 7... Control Panel -> Appearance and Personalization - > Folder Options (The little show hidden files link - This pops a window open, Click the check box for "Show Hidden files, folders and drives"

-This is the location that is where the memorycoin.conf file should be saved (keep in mind we are not saving this as a memorycoin.conf.txt - you will need to open in text editor/notepad and save as then choose "all files" in the drop down and save it as "memorycoin.conf")

Right-click -> New Text Document -> Save as memorycoin.conf

Edit this file and paste the following:

rpcuser=username
rpcpassword=password
rpcport=1925
rpcallow=127.0.0.1
server=1
addnode=180.183.156.250:1968
addnode=76.24.94.154:1968
addnode=62.43.2.239:1968
addnode=82.52.177.81:1968
addnode=84.249.109.128:1968
addnode=78.239.107.25:49568
addnode=90.231.187.171:50251
addnode=70.112.30.253:26959
addnode=74.88.177.35:16511
addnode=54.200.207.220:49260
addnode=193.92.140.209:51570
addnode=95.89.105.134:1968
addnode=79.3.168.143:1968
addnode=91.157.155.98:1968
addnode=78.239.107.25:1968
addnode=87.49.126.92:1968
addnode=94.122.229.201:1968
addnode=94.3.149.107:1968
gen=1


Relaunch your memorycoin-qt client. Mine is currently connecting from the computer I am typing on but on my second pc it is still stuck with bouncing 1 and 0 network connections. (I am going to try the config file there as well to confirm)




Tips - MSVGgt48rebAAiimK6D7fvtZmmtZVoL6Dc

[surfer43]

I added the nodes but it just doesnt sync, it says no blocksource available

Patience... It doesn't take that long 

Been waiting over an hour.
If I close the wallet and reopen, is there like a line that I am sent to the back of?

No... I think you should do that because it took me only 5 minutes after adding nodes.

[FreePls]

 There's no particular harm, the block rewards are set low in this period, ramping up to a full block reward in 48hrs.

So its just useless and waste of power to mine in that 48 hours?  why should i mine now for getting 1,3xx MMC when i can find 280 MMC in 2 days

very confusing for me, i don't understand it  

[TheMightyX]

Do manually added nodes with the debugging console stay when you relaunch the client ?

no

So how do you permanently add them?

add to .conf file.
Check earlier posts for a .conf file you can copy and paste into the %appdata%/memorycoin folder

[surfer43]

0.25 hashes/minute on quad core i3

[Abinito]

PM me if you are willing to sell a nice amount of MMC's to compensate some of the electricity costs in advance.

[TheMightyX]

I added the nodes but it just doesnt sync, it says no blocksource available

Patience... It doesn't take that long 

Been waiting over an hour.
If I close the wallet and reopen, is there like a line that I am sent to the back of?

No... I think you should do that because it took me only 5 minutes after adding nodes.

I've added all the nodes except for a few of the ones from that huge list.
Adding from that list is tedious and frustrating but I did add most of them.
Seems like this is just random luck getting a peer to connect.

[surfer43]

 There's no particular harm, the block rewards are set low in this period, ramping up to a full block reward in 48hrs.

So its just useless and waste of power to mine in that 48 hours?  why should i mine now for getting 1,3xx MMC when i can find 280 MMC in 2 days

very confusing for me, i don't understand it  

because right now difficulty is so low, it cancels the effect of low reward

[deathmul]

How to start mining on VPS?

[trankil]

put 16 process instead of 8 doesn"t high the hasrate why??

[ryen123]

My currently connected peers.

70.112.30.253
88.65.48.232
94.3.149.107
98.212.120.211
95.89.105.134
84.111.156.162
212.117.60.220
82.234.53.166

[giveBTCpls]

It worked, it's downloading the block.
What about the .conf file? Why it isn't included by default? What should I put inside the memorycoin.conf file that I have to create anyway?

Also, how do I set that the mined coins go to a certain address? I dont want to be mining and find out they aren't getting into my address

I have the exact same question please !

Actually I've never used a .conf file

Mined rewards will go to your main wallet address.

Then why im not having seeing any coins?


{
"blocks" : 44,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.00000099,
"errors" : "",
"generate" : false,
"genproclimit" : 4,
"hashespermin" : 0.44342621,
"pooledtx" : 0,
"testnet" : false
}

How do I see if im mined something or not? Is that allright or something is wrong? why is generate set to false? please help

ugh... When you mine a coin, on the home page "overview" it will show your balance at the top left. Coins must be confirmed before they enter your Balance.
When you mine a block it will appear under the "recent transactions" on the right with the time amount and address.

Why does my "generate" say false but everyone else says true? what does this mean.
Also, why is this so slow if we are mining right at the begining? No one has a single MMC yet not even unconfirmed

if you looked. There have been people that have mined. Like the post above yours...just has a loooooong time to find a block.

That still doesnt answer what generate is and why mine says false?

Did you do Settings -> Mine _ Processes yet?

It will be at 0.000000 hashespermin for a couple minutes then it should update.

Yes, im mining already, look at the hash rate



{
"blocks" : 46,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.00000154,
"errors" : "",
"generate" : false,
"genproclimit" : 4,
"hashespermin" : 0.44859478,
"pooledtx" : 0,
"testnet" : false
}

But generate says false for some reason, I dont know what that means but everyone else has "true" on it

Not sure what it really means either. But I think you can change it to true just by doing "setgenerate true"

Can anyone answer this?

Here is how you get the memorycoin.conf file to work in the correct directory on Windows 7...

Go to C:\Users\<YourUsernameHere>\AppData\Roaming\MemoryCoin\   (**do not include < > in your username folder) ###NINJA EDIT- The folder "AppData" is a hidden folder. If you do not see this folder perform the following from Windows 7... Control Panel -> Appearance and Personalization - > Folder Options (The little show hidden files link - This pops a window open, Click the check box for "Show Hidden files, folders and drives"

-This is the location that is where the memorycoin.conf file should be saved (keep in mind we are not saving this as a memorycoin.conf.txt - you will need to open in text editor/notepad and save as then choose "all files" in the drop down and save it as "memorycoin.conf")

Right-click -> New Text Document -> Save as memorycoin.conf

Edit this file and paste the following:
rpcuser=username
rpcpassword=password
rpcport=1966
rpcallow=127.0.0.1
server=1
addnode=180.183.156.250:1968
addnode=76.24.94.154:1968
addnode=62.43.2.239:1968
addnode=82.52.177.81:1968
addnode=84.249.109.128:1968
addnode=78.239.107.25:49568
addnode=90.231.187.171:50251
addnode=70.112.30.253:26959
addnode=74.88.177.35:16511
addnode=54.200.207.220:49260
addnode=193.92.140.209:51570
addnode=95.89.105.134:1968
addnode=79.3.168.143:1968
addnode=91.157.155.98:1968
addnode=78.239.107.25:1968
addnode=87.49.126.92:1968
addnode=94.122.229.201:1968
addnode=94.3.149.107:1968
gen=1


Relaunch your memorycoin-qt client. Mine is currently connecting from the computer I am typing on but on my second pc it is still stuck with bouncing 1 and 0 network connections. (I am going to try the config file there as well to confirm)




Tips - MSVGgt48rebAAiimK6D7fvtZmmtZVoL6Dc

For some reason when I did this I get a runtime error when I try to open memorycoin client again. I delete the conf file and it works again. Wtf??

[surfer43]

Still calculating hash rate on Sempron after 10 minutes   I guess it needs AES-NI?

[lemons]

E3-1230 V3 : hashespermin" : 3.09464864

[Zen00]

put 16 process instead of 8 doesn"t high the hasrate why??

You have to actually have 16 physical threads, and not hyperthreads I believe.

MKaoA6nyBTUhMPN37LcPCFLSsSSf45YbhG

[trankil]

put 16 process instead of 8 doesn"t high the hasrate why??

You have to actually have 16 physical threads, and not hyperthreads I believe.

MKaoA6nyBTUhMPN37LcPCFLSsSSf45YbhG

whats the diferrence dont understand

[surfer43]

What is the block reward right now?