[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!!

[NewSapUser]

280x: gpu 1070
gpu-memclock 1500
intensity 11
thread-concurrency 8192
~70 kh/s, no HW

I have only 3Gb RAM onboard. If TC> 16000 cgminer crushes

What you can advice?

[fredeq]

i have 5 280x from powercolor and i get only 70khs per second. it makes no difference if i change my TC.

Some one get the settings for powercolor 280x?

whats teh exact error you guys are getting?

[fredeq]

280x: gpu 1070
gpu-memclock 1500
intensity 11
thread-concurrency 8192
~70 kh/s, no HW

I have only 3Gb RAM onboard. If TC> 16000 cgminer crushes

What you can advice?

 --thread-concurrency 16384 -g 2 -I 12 --lookup-gap 3

This should give you 110. To get 130(I think) you need 8gb RAM and change --lookup-gap 2.

[junkun13]

Also can't get tc higher than 8192

I have a powercolor turboduo 280x  

[therealrock]

i get no errors. just a low hashrate!!!

"api-listen" : true,
"intensity" : "12",
"vectors" : "1",
"worksize" : "256",
"kernel" : "scrypt-jane",
"auto-fan" : true,
"temp-cutoff" : "90",
"temp-overheat" : "85",
"temp-target" : "72",
"expiry" : "10",
"gpu-dyninterval" : "7",
"log" : "5",
"queue" : "0",
"retry-pause" : "5",
"scan-time" : "1",
"scrypt" : true,
"scrypt-jane" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"shaders" : "1792",
"thread-concurrency" : "16384",
"gpu-thread" : "2",
"gpu-engine" : "1000",
"sharethreads" : "32",
"lookup-gap" : "2",
"gpu-powertune" : "20",
"gpu-memclock" : "1500"

[fredeq]

i get no errors. just a low hashrate!!!

"api-listen" : true,
"intensity" : "12",
"vectors" : "1",
"worksize" : "256",
"kernel" : "scrypt-jane",
"auto-fan" : true,
"temp-cutoff" : "90",
"temp-overheat" : "85",
"temp-target" : "72",
"expiry" : "10",
"gpu-dyninterval" : "7",
"log" : "5",
"queue" : "0",
"retry-pause" : "5",
"scan-time" : "1",
"scrypt" : true,
"scrypt-jane" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"shaders" : "1792",
"thread-concurrency" : "16384",
"gpu-thread" : "2",
"gpu-engine" : "1000",
"sharethreads" : "32",
"lookup-gap" : "2",
"gpu-powertune" : "20",
"gpu-memclock" : "1500"

Delete shaders from that config. use tc only.

[refereeCoin]

http://s019.radikal.ru/i626/1402/e6/c333461a17b4.jpg

Guys, what's the problem?

setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNC_OBJECTS 1
-d 0,1,2,3,4 --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --worksize 256,256,256,256,256 -g 2 -I 12,12,12,12,12 --lookup-gap 2 --thread-concurrency 16384,16384,16384,16384,16384 --gpu-engine 1150,1150,1150,1000,1150 --gpu-memclock 1000,1500,1500,1350,1500 --gpu-map 0:1,1:4,2:2,3:3,4:0


P.S. Sapphire R9 280x Dual-X, 4gb RAM.

[cointradero]

Guys, what's the problem?

setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNC_OBJECTS 1
-d 0,1,2,3,4 --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --worksize 256,256,256,256,256 -g 2 -I 12,12,12,12,12 --lookup-gap 2 --thread-concurrency 16384,16384,16384,16384,16384 --gpu-engine 1150,1150,1150,1000,1150 --gpu-memclock 1000,1500,1500,1350,1500 --gpu-map 0:1,1:4,2:2,3:3,4:0


P.S. Sapphire R9 280x Dual-X, 4gb RAM.

That card's driver failed and then recovered.  Restart your system. 

[untalented]

280x: gpu 1000
gpu-memclock 1500
intensity 12
thread-concurrency 16384
~130 kh/s, no HW

THX for best settings TC on 280x:) 100 UTC SENT

[alekseev555]

280x: gpu 1000
gpu-memclock 1500
intensity 12
thread-concurrency 16384
~130 kh/s, no HW

THX for best settings TC on 280x:) 100 UTC SENT

THX for UTC

[camper111]

Config for R9 290???

[bumface]

about utc low price

http://www.youtube.com/watch?v=6Fb9M1e-cNc

[regnevacs]

280x: gpu 1000
gpu-memclock 1500
intensity 12
thread-concurrency 16384
~130 kh/s, no HW

THX for best settings TC on 280x:) 100 UTC SENT

THX for UTC

why he got 100 and i got only 10?? haha

[Jmattes]

What happened with CT...

I never got my BTC and now there down..

I tried once and they cancelled my withdrawal for crying out loud!

[nanoprobe]

Guys, what's the problem?

setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNC_OBJECTS 1
-d 0,1,2,3,4 --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --worksize 256,256,256,256,256 -g 2 -I 12,12,12,12,12 --lookup-gap 2 --thread-concurrency 16384,16384,16384,16384,16384 --gpu-engine 1150,1150,1150,1000,1150 --gpu-memclock 1000,1500,1500,1350,1500 --gpu-map 0:1,1:4,2:2,3:3,4:0


P.S. Sapphire R9 280x Dual-X, 4gb RAM.

I had that problem occasionally with a dual 7970 set up but it had 8GB of ram. The only way I could get it to clear up was to reboot the computer.

I have 2 questions about your conf file.
#1 What is the -d 0,1,2,3,4 setting for?
#2 What is the --gpu-map 0:1,1:4,2:2,3:3,4:0  used for?

[theviki]

Config for R9 290???

please  

[junkun13]

Also can't get tc higher than 8192

I have a powercolor turboduo 280x  

anyone?

[fredeq]

Config for R9 290???

please  

With 8gb of ram you should simply go wild on tc until you are satisfied. If you have 4gb, well I am experimenting with lookup-gap 3 but g2 sadly is a no go.

[red5standingby]

my giant buy wall on mint just filled at 225. sold at 237 earlier. love it when .16 btc is a buy wall.

[fredeq]

Also can't get tc higher than 8192

I have a powercolor turboduo 280x  

anyone?

try --lookup-gap 3